- 22 Sep, 2009 16 commits
-
-
Mark Brown authored
The patch to add support for looking up consumers by device name had the side effect of causing us to require a device which is at best premature since at least cpufreq still operates outside the device model. Remove that requirement. Reported-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
We're probably going to start oopsing fairly soon after this happens. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Simplify checking of support for voltage ranges by providing an API which wraps the existing count and list operations. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Some consumers require complete control of the regulator and can't tolerate sharing it with other consumers, most commonly because they need to have the regulator actually disabled so can't have other consumers forcing it on. This new regulator_get_exclusive() API call allows these consumers to explicitly request this, documenting the assumptions that they are making. In order to simplify coding of such consumers the use count for regulators they request is forced to match the enabled state of the regulator when it is requested. This is not possible for consumers which can share regulators due to the need to keep track of the ownership of use counts. A new API call is used rather than an additional argument to the existing regulator_get() in order to avoid merge headaches with driver code in other trees. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Haojian Zhuang authored
Make da903x driver to list voltage and count voltage. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
roald authored
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Haojian Zhuang authored
In PXA3xx SoC family, V_CORE power doamin is supplied by BUCK1 that is controller by ADTV1 or ADTV2 register. By default, v1 and v2 has the same copy. If v1 or v2 is updated, the last value that is written to either register takes effect. It means that v1 and v2 has different copy. And the actual voltage output is determinated by last update on either register. DA9034/35 is binded with PXA3xx SoC family. While SoC is scaling OP or entering/exiting lower power mode, SoC needs to change voltage of V_CORE power doamin. In order to be efficient, POWER I2C (hardcode) mode could be enabled in SoC. In this mode, SoC will control v2 register directly. In original DA903x driver, software will only read regulator data from v1 register. But SoC controls v2 register directly. It results that v1 and v2 isn't synchronized. Wrong data will be read from v1 register. So access v2 register in da903x driver instead. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Haojian Zhuang authored
Support the operation of DA9030 BUCK2 in da903x driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Haojian Zhuang authored
BUCK3 is the new component in DA9035. So there're three BUCKs in DA9035. And there're two BUCKs in DA9034. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
This allows machine drivers to build without ifdefs if they have full constraints. Suggested by machine drivers contributed by Haojian Zhuang <haojian.zhuang@gmail.com>. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Follow the approach suggested by Russell King and implemented by him in the clkdev API and allow consumer device supply mapings to be set up using the dev_name() for the consumer instead of the struct device. In order to avoid making existing machines instabuggy and creating merge issues the use of struct device is still supported for the time being. This resolves problems working with buses such as I2C which make the struct device available late providing that the final device name is known, which is the case for most embedded systems with fixed setups. Consumers must still use the struct device when calling regulator_get(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
This makes it easier to read the logs when doing testing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Mark Brown authored
The core will no longer complain so we should log an error here. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
Roel Kluin authored
Ensure that reg is within the bounds of array wm8350->pmic.pdev[]. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
-
- 21 Sep, 2009 24 commits
-
-
Linus Torvalds authored
Merge branch 'perfcounters-rename-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-rename-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Tidy up after the big rename perf: Do the big rename: Performance Counters -> Performance Events perf_counter: Rename 'event' to event_id/hw_event perf_counter: Rename list_entry -> group_entry, counter_list -> group_list Manually resolved some fairly trivial conflicts with the tracing tree in include/trace/ftrace.h and kernel/trace/trace_syscalls.c.
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: Fix whitespace inconsistencies rcu: Fix thinko, actually initialize full tree rcu: Apply results of code inspection of kernel/rcutree_plugin.h rcu: Add WARN_ON_ONCE() consistency checks covering state transitions rcu: Fix synchronize_rcu() for TREE_PREEMPT_RCU rcu: Simplify rcu_read_unlock_special() quiescent-state accounting rcu: Add debug checks to TREE_PREEMPT_RCU for premature grace periods rcu: Kconfig help needs to say that TREE_PREEMPT_RCU scales down rcutorture: Occasionally delay readers enough to make RCU force_quiescent_state rcu: Initialize multi-level RCU grace periods holding locks rcu: Need to update rnp->gpnum if preemptable RCU is to be reliable
-
Linus Torvalds authored
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf_counter, powerpc, sparc: Fix compilation after perf_counter_overflow() change perf_counter: x86: Fix PMU resource leak perf util: SVG performance improvements perf util: Make the timechart SVG width dynamic perf timechart: Show the duration of scheduler delays in the SVG perf timechart: Show the name of the waker/wakee in timechart
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Simplify sys_sched_rr_get_interval() system call sched: Fix potential NULL derference of doms_cur sched: Fix raciness in runqueue_is_locked() sched: Re-add lost cpu_allowed check to sched_fair.c::select_task_rq_fair() sched: Remove unneeded indentation in sched_fair.c::place_entity()
-
Linus Torvalds authored
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: kernel/profile.c: Switch /proc/irq/prof_cpu_mask to seq_file tracing: Export trace_profile_buf symbols tracing/events: use list_for_entry_continue tracing: remove max_tracer_type_len function-graph: use ftrace_graph_funcs directly tracing: Remove markers tracing: Allocate the ftrace event profile buffer dynamically tracing: Factorize the events profile accounting
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Print the hypervisor returned tsc_khz during boot x86: Correct segment permission flags in 64-bit linker script x86: cpuinit-annotate SMP boot trampolines properly x86: Increase timeout for EHCI debug port reset completion in early printk x86: Fix uaccess_32.h typo x86: Trivial whitespace cleanups x86, apic: Fix missed handling of discrete apics x86/i386: Remove duplicated #include x86, mtrr: Convert loop to a while based construct, avoid naked semicolon Revert 'x86: Fix system crash when loading with "reservetop" parameter' x86, mce: Fix compile warning in case of CONFIG_SMP=n x86, apic: Use logical flat on intel with <= 8 logical cpus x86: SGI UV: Map MMIO-High memory range x86: SGI UV: Add volatile semantics to macros that access chipset registers x86: SGI UV: Fix IPI macros x86: apic: Convert BUG() to BUG_ON() x86: Remove final bits of CONFIG_X86_OLD_MCE
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'writeback' of git://git.kernel.dk/linux-2.6-block: nfs: initialize the backing_dev_info when creating the server writeback: make balance_dirty_pages() gradually back more off writeback: don't use schedule_timeout() without setting runstate nfs: nfs_kill_super() should call bdi_unregister() after killing super
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (222 commits) V4L/DVB (13033): pt1: Don't use a deprecated DMA_BIT_MASK macro V4L/DVB (13029): radio-si4713: remove #include <linux/version.h> V4L/DVB (13027): go7007: convert printks to v4l2_info V4L/DVB (13026): s2250-board: Implement brightness and contrast controls V4L/DVB (13025): s2250-board: Fix memory leaks V4L/DVB (13024): go7007: Implement vidioc_g_std and vidioc_querystd V4L/DVB (13023): go7007: Merge struct gofh and go declarations V4L/DVB (13022): go7007: Fix mpeg controls V4L/DVB (13021): go7007: Fix whitespace and line lengths V4L/DVB (13020): go7007: Updates to Kconfig and Makefile V4L/DVB (13019): video: initial support for ADV7180 V4L/DVB (13018): kzalloc failure ignored in au8522_probe() V4L/DVB (13017): gspca: kmalloc failure ignored in sd_start() V4L/DVB (13016): kmalloc failure ignored in lgdt3304_attach() and s921_attach() V4L/DVB (13015): kmalloc failure ignored in m920x_firmware_download() V4L/DVB (13014): Add support for Compro VideoMate E800 (DVB-T part only) V4L/DVB (13013): FM TX: si4713: Kconfig: Fixed two typos. V4L/DVB (13012): uvc: introduce missing kfree V4L/DVB (13011): Change tuner type of BeholdTV cards V4L/DVB (13009): gspca - stv06xx-hdcs: Reduce exposure range ...
-
git://git.infradead.org/ubifs-2.6Linus Torvalds authored
* 'linux-next' of git://git.infradead.org/ubifs-2.6: UBIFS: fix debugging dump UBIFS: improve lprops dump UBIFS: various minor commentary fixes UBIFS: improve journal head debugging prints UBIFS: define journal head numbers in ubifs-media.h UBIFS: amend commentaries UBIFS: check ubifs_scan error codes better UBIFS: do not print scary error messages needlessly UBIFS: add inode size debugging check UBIFS: constify file and inode operations UBIFS: remove unneeded call from ubifs_sync_fs UBIFS: kill BKL UBIFS: remove unused functions UBIFS: suppress compilation warning
-
git://git.infradead.org/ubi-2.6Linus Torvalds authored
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: improve NOR flash erasure quirk UBI: introduce flash dump helper UBI: eliminate possible undefined behaviour UBI: print a warning if too many PEBs are corrupted UBI: amend NOR flash pre-erase quirk UBI: print a message if ECH is corrupted and VIDH is ok
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (133 commits) drm/vgaarb: add VGA arbitration support to the drm and kms. drm/radeon: some r420s have a CP race with the DMA engine. drm/radeon/r600/kms: rv670 is not DCE3 drm/radeon/kms: r420 idle after programming GA_ENHANCE drm/radeon/kms: more fixes to rv770 suspend/resume path. drm/radeon/kms: more alignment for rv770.c with r600.c drm/radeon/kms: rv770 blit init called too late. drm/radeon/kms: move around new init path code to avoid posting at init drm/radeon/r600: fix some issues with suspend/resume. drm/radeon/kms: disable VGA rendering engine before taking over VRAM drm/radeon/kms: Move radeon_get_clock_info() call out of radeon_clocks_init(). drm/radeon/kms: add initial connector properties drm/radeon/kms: Use surfaces for scanout / cursor byte swapping on big endian. drm/radeon/kms: don't fail if we fail to init GPU acceleration drm/r600/kms: fixup number of loops per blit calculation. drm/radeon/kms: reprogram format in set base. drm/radeon: avivo chips have no separate int bit for display drm/radeon/r600: don't do interrupts drm: fix _DRM_GEM addmap error message drm: update crtc x/y when only fb changes ... Fixed up trivial conflicts in firmware/Makefile due to network driver (cxgb3) and drm (mga/r128/radeon) firmware being listed next to each other.
-
Ingo Molnar authored
The build of the dabusb driver broke: drivers/media/video/dabusb.c:758: error: unknown field 'nodename' specified in initializer drivers/media/video/dabusb.c:758: warning: initialization from incompatible pointer type make[3]: *** wait: No child processes. Stop. Due to this commit: e454cea2: Driver-Core: extend devnode callbacks to provide permissions Missing the dabusb driver's dabusb_nodename() callback. Similar issues with the iio/industrialio driver in staging, pointed out and patched by Jean Delvare. Signed-off-by: Ingo Molnar <mingo@elte.hu> Industrialio-parts-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jens Axboe authored
NFS may free the server structure without ever having used the bdi, so we either need to flag the bdi as being uninitialized or initialize it up front. This does the latter. This fixes a crash with mounting more than one NFS file system, should people ever need that kind of obscure NFS functionality. Tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
Currently it just sleeps for a very short time, just 1 jiffy. If we keep looping in there, continually delay for a little longer of up to 100msec in total. That was the old limit for congestion wait. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
Just use schedule_timeout_interruptible(), saves a call to set_current_state(). Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Jens Axboe authored
Otherwise we could be attempting to flush data for a writeback thread and bdi that have already disappeared. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Ingo Molnar authored
- provide compatibility Kconfig entry for existing PERF_COUNTERS .config's - provide courtesy copy of old perf_counter.h, for user-space projects - small indentation fixups - fix up MAINTAINERS - fix small x86 printout fallout - fix up small PowerPC comment fallout (use 'counter' as in register) Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
In preparation to the renames, to avoid a namespace clash. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
This is in preparation of the big rename, but also makes sense in a standalone way: 'list_entry' is a bad name as we already have a list_entry() in list.h. Also, the 'counter list' is too vague, it doesnt tell us the purpose of that list. Clarify these names to show that it's all about the group hiearchy. Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Merge reason: pull in all the latest code before doing the rename. Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Artem Bityutskiy authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into linux-next Conflicts: fs/ubifs/super.c Merge the upstream tree in order to resolve a conflict with the per-bdi writeback changes from the linux-2.6-block tree.
-
Peter Williams authored
By removing the need for it to know details of scheduling classes. This allows PlugSched to define orthogonal scheduling classes. Signed-off-by: Peter Williams <pwil3058@bigpond.net.au> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <06d1b89ee15a0eef82d7.1253496713@mudlark.pw.nest> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Paul Mackerras authored
Commit 5622f295 ("x86, perf_counter, bts: Optimize BTS overflow handling") removed the regs field from struct perf_sample_data and added a regs parameter to perf_counter_overflow(). This breaks the build on powerpc (and Sparc) as reported by Sachin Sant: arch/powerpc/kernel/perf_counter.c: In function 'record_and_restart': arch/powerpc/kernel/perf_counter.c:1165: error: unknown field 'regs' specified in initializer This adjusts arch/powerpc/kernel/perf_counter.c to correspond with the new struct perf_sample_data and perf_counter_overflow(). [ v2: also fix Sparc, Markus Metzger <markus.t.metzger@intel.com> ] Reported-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Markus Metzger <markus.t.metzger@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: benh@kernel.crashing.org Cc: linuxppc-dev@ozlabs.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19127.8400.376239.586120@drongo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-