Merge tag 'renesas-soc-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Renesas ARM Based SoC Updates for v4.18

* SoC
  - Change platform dependency to ARCH_RENESAS
    This will allow to drop ARCH_SHMOBILE on ARM and ARM64 in the near
    future.
  - Add the to Kconfig RZ/N1D (r9a06g032) SoC
  - Identify R-Car E3 (r8a77990) SoC
  - Identify and add minimal support for RZ/G1C (r8a77470) SoC

* R-Car SYSC
  - Add support for R-Car E3 (r8a77990) SoC
  - Remove unused inclusion of <linux/sys_soc.h>,
  - Make r8a77995_areas[] const.

* R-Car Reset
  - Add support for R-Car E3 (r8a77990) SoC

* Debug-LL
  - Add support for RZ/G1C (r8a77470) SoC

* tag 'renesas-soc-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}
  soc: renesas: rcar-sysc: Add support for R-Car E3 power areas
  arm: shmobile: Add the RZ/N1D (R9A06G032) to the shmobile Kconfig
  arm: shmobile: Change platform dependency to ARCH_RENESAS
  soc: renesas: r8a77995-sysc: Cleanups
  soc: renesas: rcar-rst: Add support for R-Car E3
  soc: renesas: Add r8a77990 SYSC PM Domain Binding Definitions
  soc: renesas: identify R-Car E3
  ARM: debug-ll: Add support for r8a77470
  ARM: shmobile: Add the RZ/N1 arch to the shmobile Kconfig
  ARM: shmobile: r8a77470: basic SoC support
  soc: renesas: rcar-sysc: Add r8a77470 support
  soc: renesas: rcar-rst: Add support for RZ/G1C
  soc: renesas: Identify RZ/G1C
Signed-off-by: Olof Johansson <olof@lixom.net>

The patch that enabled these had no useful changelog that explains
why it is done, and it causes a build warning:

WARNING: unmet direct dependencies detected for STM32_DMA
  Depends on [n]: DMADEVICES [=n] && (ARCH_STM32 [=y] || COMPILE_TEST [=y])
  Selected by [y]:
  - MACH_STM32MP157 [=y] && ARCH_STM32 [=y] && ARCH_MULTI_V7 [=y]

Generally, platforms should not select arbitrary drivers, so let's
just revert that change.

Fixes: de6037fa ("ARM: stm32: Select DMA, DMAMUX and MDMA support on STM32MP157C")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.18/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Late omap soc changes for v4.18 merge window

This series contains two omap1 ams-delta GPIO clean-up patches to get
started with removal of hard-coded GPIO numbers from drivers. And then
the removal of board mach includes from drivers. The second patch mostly
touches the ams-delta audio driver but is included here because of the
removal of the latch gpios and is acked by Mark Brown.

And there are two more am437x related PM patches to save and restore
control module and timer registers for RTC only suspend mode. Looks like
the patch title for the timer changes is a bit misleading, not all the
timer code is yet living under drivers/clocksource. But I had already
pushed out the branch before I noticed this.

* tag 'omap-for-v4.18/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  OMAP: CLK: CLKSRC: Add suspend resume hooks
  ARM: AM43XX: Add functions to save/restore am43xx control registers
  ASoC: ams_delta: use GPIO lookup table
  ARM: OMAP1: ams-delta: add GPIO lookup tables
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'berlin-core-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin into next/soc

berlin core changes for v4.18

* tag 'berlin-core-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin:
  ARM: berlin: switch to SPDX license identifier
  arm: berlin: remove non-necessary flush_cache_all()
  ARM: berlin: extend BG2CD Kconfig entry
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.18/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

SoC changes for omap variants for v4.18 merge window

This series mostly adds saving of power and clock domain registers for
am335x/am437x suspend to RTC only mode. There is also a non-urgent fix
for omap4 PM where we could end up losing GPIO interrupts if bootloader
has LOGICRETSTATE cleared for domains. And there is a clean-up patch for
omap1 to use device properties for at24 eeprom.

* tag 'omap-for-v4.18/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Make sure LOGICRETSTATE bits are not cleared
  ARM: OMAP2+: prm44xx: Inroduce cpu_pm notifiers for context save/restore
  ARM: OMAP2+: prm44xx: Introduce context save/restore for am43 PRCM IO
  ARM: OMAP2+: powerdomain: Introduce cpu_pm notifiers for context save/restore
  ARM: OMAP2+: Add functions to save and restore powerdomain context
  ARM: OMAP2+: clockdomain: Inroduce cpu_pm notifiers for context save/restore
  ARM: OMAP2+: Add functions to save and restore clockdomain context en-masse.
  ARM: omap1: osk: use device properties for at24 eeprom
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.18/ti-sysc-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

One ti-sysc fix for v4.18 merge window

This fixes an array access errors if there are more optional clocks
than one.

* tag 'omap-for-v4.18/ti-sysc-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Fix optional clocks array access
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-core-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc

Allwinner core changes for 4.18

The A83t, unlike the other Allwinner SoCs, cannot use PSCI because of a
silicon bug. As such, we needed to have some smp_ops in order to bringup
the various cores (and clusters) found on this SoC.

* tag 'sunxi-core-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: sun8i: smp: Add support for A83T
  ARM: sun9i: smp: Add is_a83t field
  ARM: sun9i: smp: Rename clusters's power-off
  ARM: shmobile: Convert file to use cntvoff
  ARM: sunxi: Add initialization of CNTVOFF
  ARM: smp: Add initialization of CNTVOFF
  ARM: sunxi: smp: Move assembly code into a file
  ARM: Allow this header to be included by assembly files
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-soc-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

i.MX SoC update for 4.18:
 - A series from Bartosz to convert all i.MX plaform code using
   at24_platform_data to use at24 eeprom generic device properties.
 - Enable pinctrl driver support for i.MX6SLL SoC.
 - Clean up i.MX platform code using spi_imx platform data on outdated
   documentation and chip select array usage.

* tag 'imx-soc-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: select imx6sll pinctrl when imx6sll enabled
  ARM: imx: pcm037: use device properties for at24 eeprom
  ARM: imx: pca100: use device properties for at24 eeprom
  ARM: imx: pcm043: use device properties for at24 eeprom
  ARM: imx: vpr200: drop at24_platform_data
  ARM: imx: Update spi_imx platform data to reflect current state
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-4.18-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

ARM: tegra: Core changes for v4.18-rc1

Contains a single patch that instantiates a platform device for the CPU
frequency driver.

* tag 'tegra-for-4.18-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Create platform device for tegra20-cpufreq driver
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-for-v4.18/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

DaVinci SoC support updates for v4.18

Mainly contains patches to move NAND chipselect to platform data
(currently platform device id is being used). These patches have
been acked by NAND maintainer and because of the driver dependency
an immutable branch has been provided to Boris.

The other patch is to remove an unnecessary postcore_initcall() on
DM644x which is needed for common clock framework conversion.

* tag 'davinci-for-v4.18/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: dm644x: remove unnecessary postcore_initcall()
  ARM: davinci: aemif: stop using pdev->id as nand chipselect
  mtd: rawnand: davinci: stop using pdev->id as chipselect
  ARM: davinci: neuros-osd2: specify the chipselect in davinci_nand_pdata
  ARM: davinci: dm646x-evm: specify the chipselect in davinci_nand_pdata
  ARM: davinci: mityomapl138: specify the chipselect in davinci_nand_pdata
  ARM: davinci: dm644x-evm: specify the chipselect in davinci_nand_pdata
  ARM: davinci: dm365-evm: specify the chipselect in davinci_nand_pdata
  ARM: davinci: dm355-leopard: specify the chipselect in davinci_nand_pdata
  ARM: davinci: dm355-evm: specify the chipselect in davinci_nand_pdata
  ARM: davinci: da850-evm: specify the chipselect in davinci_nand_pdata
  ARM: davinci: da830-evm: specify the chipselect in davinci_nand_pdata
  mtd: rawnand: davinci: store the core chipselect number in platform data
Signed-off-by: Olof Johansson <olof@lixom.net>

Use the appropriate SPDX license identifier and drop the previous
boilerplate license text.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

I believe the flush_cache_all() after scu_enable() is to "Ensure that
the data accessed by CPU0 before the SCU was initialised is visible
to the other CPUs." as commented in scu_enable(). So here
flush_cache_all() is a duplication, remove it.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

BG2CD SoC uses r3p0 Cortex-A9 MPCore single-CPU cluster. Autoselect
pertinent errata, the SCU and the global timer, and allow use of the
local timer on uniprocessor kernels.

PL310 L2 cache controller has revision r3p2; no errata to select.
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>

Add the save and restore for clksrc as part of suspend and resume
so that it saves the counter value and restores. This is needed in
modes like rtc+ddr in self-refresh not doing this stalls the time.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

These registers are part of the wkup domain and are lost during RTC only
suspend and also hibernation, so storing/restoring their state is
necessary.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Now as the Amstrad Delta board provides GPIO lookup tables, switch from
GPIO numbers to GPIO descriptors and use the table to locate required
GPIO pins.

The card uses two pins, one for jack and the other for voice modem
codec DAI control.

For jack pin, remove hardcoded GPIO number and use GPIO descriptor
based variant of jack GPIO initialization.

For modem_codec pin, declare static variable for storing its GPIO
descriptor, obtain it on card initialization and replace obsolete
ams_delta_latch2_write() with gpiod_set_value().  For that to work,
don't request the modem_codec pin from the board init code anymore.

If the modem_codec GPIO lookup fails, skip initialization of
functionality of the card which depends on its availability.

Pin naming used by the driver should be followed while respective GPIO
lookup table is initialized by a board init code.

Created and tested against linux-4.17-rc3, on top of patch 1/6 "ARM:
OMAP1: ams-delta: add GPIO lookup tables"
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Scope of the change is limited to GPIO pins used by board specific
device drivers which will be updated by follow-up patches of the
series. Those are some OMAP GPIO (gpio-0-15) and most of Amstrad Delta
latch2 GPIO bank pins. Remaining pins of those banks, as well as
Amstrad Delta latch1 pins, will be addressed later.

Assign a label ("latch2") to the bank, enumerate its pins and put that
information, together with OMAP GPIO bank pins, in GPIO lookup tables.
Assign lookup tables to devices as soon as those devices are registered
and their names can be obtained.

A step froward in:
- removal of hard-coded GPIO numbers from drivers,
- removal of board mach includes from drivers,
- switching to dynamically assigned GPIO numbers.

Created and compile tested agains linux-4.17-rc3
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We should be checking ddata->clocks[i] instead of clock_names[i]
for the optional clocks. Currently this just happens to work for
the typical case of one fck and one optional clock.

Fixes: 09dfe581 ("bus: ti-sysc: Add handling for clkctrl opt clocks")
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

We may have LOGICRETSTATE cleared by the bootloader or kexec boot.

Currently this means we will see lost GPIO interrupts at least for
network interfaces such as wlcore and smsc911x if PER hits retention.

Let's fix the issue by making sure LOGICRETSTATE is set. Once we have
GPIOs working with wakeirqs then we should be able to clear it.

Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Inroduce cpu_pm notifiers for context save/restore. This will be
needed for am43xx family in case of rtc only mode with ddr in
self-refresh.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

There are two registers on am43x needed for IO daisy chain wake to work
properly, however currently after an RTC+DDR cycle they are lost. We
must take care to save and restore these before and after entering RTC
mode otherwise IO daisy chain wake will stop working from DeepSleep
after resuming.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Inroduce cpu_pm notifiers for context save/restore. This is
needed for am43xx family during rtc only mode with ddr in
self-refresh.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The powerdomain control registers are stored in the WKUP powerdomain on
AM33XX/AM43XX, which is lost on RTC-only suspend and also hibernate. This
adds context save and restore functions for those registers.
Sometimes the powerdomain state does not need to change,
perhaps we only need to change memory retention states, so make
sure the restored state is different from the current state before we wait
for a transition.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Inroduce cpu_pm notifiers for context save/restore. This will be
needed for am43xx family in case of rtc only mode with ddr in
self-refresh.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Tegra20-cpufreq driver require a platform device in order to be loaded,
instantiate a simple platform device for the driver during of the machines
late initialization.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This is used to support suspend modes like RTC-only and hibernate where
the state of the registers controlling clockdomains is lost.
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds workaround for 3DG-{A,B} of R-Car E3 ES1.0 because
the SoC has a restriction about the order.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This patch adds Cortex-A53 CPU{0,1}, Cortex-A53 SCU, Cortex-R7, A3VC,
A2VC1 and 3DG-{A,B} power domain areas for the R8A77990 SoC.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[shimoda: fix 3DG-{A,B} and add SPDX-License-Identifier]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Merge tag 'samsung-soc-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Samsung mach/soc changes for v4.18

1. Remove at24_platform_data in S3C2440.
2. Fix invalid SPDX identifier.
3. Remove Exynos5440 entirely.
4. Cleanups.
5. Remove static mapping of SCU SFR and rely on DTS.

* tag 'samsung-soc-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: exynos: Remove unused soc_is_exynos{4,5}
  ARM: exynos: Remove static mapping of SCU SFR
  ARM: exynos: no need to select ARCH_HAS_BANDGAP any longer
  ARM: exynos: Remove support for Exynos5440
  ARM: s3c24xx: Fix invalid SPDX identifier
  ARM: samsung: simplify getting .drvdata
  ARM: s3c24xx: mini2440: Use device properties for at24 eeprom
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM-based machine/platform files
changes for 4.18, please pull the following:

- Doug updates arch/arm/include/asm/cpuinfo.h such that this header file
can be used by both C and assembly code. This particular change will
also be included in a Sunxi pull request to support A83T SMP support.

- Doug also updates our DEBUG_LL routine to support newer chips such as
7278 which have a version 7 memory map which moves the registers from
physical address 0xf000_0000 down to 0x0800_0000. This requires us to
look up the processor MIDR and determine the base address from the
PERIPHBASE register.

- Florian updates the Brahma-B15 read-ahead cache implementation such
that it works on the Brahma-B53 CPUs, which also have an identical
read-ahead cache implementation, with a different set of offsets. He
also provides the Brahma-B15 MIDR definition such that it can be used by
other pieces of code in the future.

* tag 'arm-soc/for-4.18/soc' of https://github.com/Broadcom/stblinux:
  ARM: brcmstb: Add support for the V7 memory map
  ARM: add Broadcom Brahma-B15 main ID definition
  ARM: add Broadcom Brahma-B53 main ID definition
  ARM: Allow this header to be included by assembly files
  ARM: B15: Update to support Brahma-B53
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.18/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

ti-sysc driver related changes for omap variants

This series improves the ti-sysc interconnect target module driver to
the point where a most of SoC can be booted with interconnect target
module data configured in device tree instead of legacy platform data.
The related device tree changes need some more work though, and can
wait for v4.19. Also some drivers using nested interconnects like DSS
need more work.

We can now remove the unused pm-noop code that is not doing anything
any longer. And we can now initialize things for PM and display pdata
later to prepare things for using ti-sysc driver.

We also need to add  some more quirk handling so we can boot both with
platform data and dts data.

* tag 'omap-for-v4.18/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Show module information for suspend if DEBUG is enabled
  bus: ti-sysc: Tag sdio and wdt with legacy mode for suspend
  bus: ti-sysc: Detect UARTs for SYSC_QUIRK_LEGACY_IDLE quirk on omap4
  bus: ti-sysc: Detect omap4 type timers for quirk
  bus: ti-sysc: Add initial support for external resets
  bus: ti-sysc: Improve suspend and resume handling
  bus: ti-sysc: Tag some modules resource providers for noirq suspend
  bus: ti-sysc: Add handling for clkctrl opt clocks
  bus: ti-sysc: Make child clock alias handling more generic
  bus: ti-sysc: Handle simple-bus for nested children
  ARM: OMAP2+: Make display related init into device_initcall
  ARM: OMAP2+: Initialize SoC PM later
  ARM: OMAP2+: Only probe SDMA via ti-sysc if configured in dts
  ARM: OMAP2+: Use signed value for sysc register offsets
  ARM: OMAP2+: Allow using ti-sysc for system timers
  ARM: OMAP2+: Drop unused pm-noop
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch select DMA, DMAMUX and MDMA support for STM32MP157C machine.
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'ux500-machine-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/soc

These changes for ux500:
- Drops U8540 and U9540
- Cuts down the Kconfig options due to accumulated simplifications

* tag 'ux500-machine-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: Cut down Kconfig options
  ARM: ux500: Drop U8540/9540 support
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull x86/pti updates from Thomas Gleixner:
 "A mixed bag of fixes and updates for the ghosts which are hunting us.

  The scheduler fixes have been pulled into that branch to avoid
  conflicts.

   - A set of fixes to address a khread_parkme() race which caused lost
     wakeups and loss of state.

   - A deadlock fix for stop_machine() solved by moving the wakeups
     outside of the stopper_lock held region.

   - A set of Spectre V1 array access restrictions. The possible
     problematic spots were discuvered by Dan Carpenters new checks in
     smatch.

   - Removal of an unused file which was forgotten when the rest of that
     functionality was removed"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Remove unused file
  perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr
  perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver
  perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map()
  perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_*
  perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[]
  sched/autogroup: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
  sched/core: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
  sched/core: Introduce set_special_state()
  kthread, sched/wait: Fix kthread_parkme() completion issue
  kthread, sched/wait: Fix kthread_parkme() wait-loop
  sched/fair: Fix the update of blocked load when newly idle
  stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock

Pull scheduler fix from Thomas Gleixner:
 "Revert the new NUMA aware placement approach which turned out to
  create more problems than it solved"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "sched/numa: Delay retrying placement for automatic NUMA balance after wake_affine()"

Pull perf tooling fixes from Thomas Gleixner:
 "Another small set of perf tooling fixes and updates:

   - Revert "perf pmu: Fix pmu events parsing rule", as it broke Intel
     PT event description parsing (Arnaldo Carvalho de Melo)

   - Sync x86's cpufeatures.h and kvm UAPI headers with the kernel
     sources, suppressing the ABI drift warnings (Arnaldo Carvalho de
     Melo)

   - Remove duplicated entry for westmereep-dp in Intel's mapfile.csv
     (William Cohen)

   - Fix typo in 'perf bench numa' options description (Yisheng Xie)"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "perf pmu: Fix pmu events parsing rule"
  tools headers kvm: Sync ARM UAPI headers with the kernel sources
  tools headers kvm: Sync uapi/linux/kvm.h with the kernel sources
  tools headers: Sync x86 cpufeatures.h with the kernel sources
  perf vendor events intel: Remove duplicated entry for westmereep-dp in mapfile.csv
  perf bench numa: Fix typo in options

Pull dma-mapping fix from Christoph Hellwig:
 "Just one little fix from Jean to avoid a harmless but very annoying
  warning, especially for the drm code"

* tag 'dma-mapping-4.17-5' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: silent unwanted warning "buffer is full"

As no more user of soc_is_exynos{4,5} we can safely remove them.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>