- 17 Mar, 2015 24 commits
-
-
John Harrison authored
Apparently, this has never worked reliably and is currently disabled. Also, the gains are not particularly impressive. Thus rather than try to keep unused code from decaying and having to update it for other driver changes, it was decided to simply remove it. For: VIZ-5115 Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Matt Roper authored
We need to disable all sprite planes when disabling the CRTC. We had been using the top-level atomic 'disable' entrypoint to accomplish this, which was wrong. Not only can this lead to various locking issues, it also modifies the actual plane state, making it impossible to restore the plane properly later. For example, a DPMS off followed by a DPMS on will result in any sprite planes in use not being restored properly. The proper solution here is to call directly into our 'commit plane' hook with a copy of the plane's current state that has 'visible' set to false. Committing this dummy state will turn off the plane, but will not touch the actual plane->state pointer, allowing us to properly restore the plane state later. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Mika Kuoppala authored
If the requested size is less than what the full range of pdps can address, we end up setting pdps for only the requested area. The logical context however needs all pdp entries to be valid. Prior to commit 06fda602 ("drm/i915: Create page table allocators") we have been writing pdp entries with dma address of zero instead of valid pdps. This is supposedly bad even if those pdps are not addressed. As commit 06fda602 ("drm/i915: Create page table allocators") introduced more dynamic structure for pdps, we ended up oopsing when we populated the lrc context. Analyzing this oops revealed the fact that we have not been writing valid pdps with bsw, as it is doing the ppgtt init with 2GB limit in some cases. We should do the right thing and setup the non addressable part pdps/pde/pte to scratch page through the minimal structure by having just pdp with pde entries pointing to same page with pte entries pointing to scratch page. But instead of going through that trouble, setup all the pdps through individual pd pages and pt entries, even for non addressable parts. And let the clear range point them to scratch page. This way we populate the lrc with valid pdps and wait for dynamic page allocation work to land, and do the heavy lifting for truncating page table tree according to usage. The regression of oopsing in init was introduced by commit 06fda602 ("drm/i915: Create page table allocators") v2: Clear the range for the unused part also (Ville) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89350 Cc: Michel Thierry <michel.thierry@intel.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
Valtteri Rantala <valtteri.rantala@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Sonika Jindal authored
v2: Making the link_clock half in switch inline with the DPLL_CTRL1_* macros (Ville) Signed-off-by:
Sonika Jindal <sonika.jindal@intel.com> Reviewed-by:
-
Sonika Jindal authored
eDp 1.4 supports custom frequencies. Skylake supports following intermediate frequencies : 3.24 GHz, 2.16 GHz and 4.32 GHz along with usual LBR, HBR and HBR2 frequencies. Read sink supported frequencies and get common frequencies from sink and source and use these for link training. v2: Rebased, removed calculation of min_clock since for edp it is taken as max_clock (as per comment). v3: Keeping single array for link rates (Satheesh) v4: Setting LINK_BW_SET to 0 when setting LINK_RATE_SET (Satheesh) v5: Some minor nits (Ville) v6: Keeping separate arrays for source and sink rates (Ville) v7: Remove redundant setting of DP_LINK_BW_SET to 0 (Ville) Reviewed-by:
-
Sonika Jindal authored
v2: Using DP_SUPPORTED_LINK_RATES macro for supported_rates array (Satheesh). v3: Reading dpcd's supported link rates tables based upon edp version in the same patch. v4: Move version check under is_edp (Satheesh) v5: Using le16 for rates, some naming, and removing nested if block (Ville) v6: Correctly using DP_MAX_SUPPORTED_RATES and removing DP_SUPPORTED_LINK_RATES (Ville) v7: Incorrectly removed DP_SUPPORTED_LINK_RATES in v6, re-adding it v8: Checking return value of intel_dp_dpcd_read_wake() (Ville) Reviewed-by:
-
Paulo Zanoni authored
Kill the blt/render tracking we currently have and use the frontbuffer tracking infrastructure. Don't enable things by default yet. v2: (Rodrigo) Fix small conflict on rebase and typo at subject. v3: (Paulo) Rebase on RENDER_CS change. v4: (Paulo) Rebase. v5: (Paulo) Simplify: flushes don't have origin (Daniel). Also rebase due to patch order changes. Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
Ramalingam C authored
In invalidate and flush functions of eDP DRRS, if deferred downclock work starts execution at a time window between acquiring the drrs mutex and cancellation of the deferred work (intel_edp_drrs_downclock_work), then deferred work will find drrs mutex locked and wait for the same. Meanwhile the function that acquired mutex drrs invalidate/flush will wait for the completion of the deferred work before releasing the mutex. Thats a deadlock. To avoid such deadlock scenario, this change cancels the deferred work before acquiring the mutex at invalidate and flush functions. Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
-
Vandana Kannan authored
Adding a debugfs entry to determine if DRRS is supported or not V2: [By Ram]: Following details about the active crtc will be filled in seq-file of the debugfs 1. Encoder output type 2. DRRS Support on this CRTC 3. DRRS current state 4. Current Vrefresh Format is as follows: CRTC 1: Output: eDP, DRRS Supported: Yes (Seamless), DRRS_State: DRRS_HIGH_RR, Vrefresh: 60 CRTC 2: Output: HDMI, DRRS Supported : No, VBT DRRS_type: Seamless CRTC 1: Output: eDP, DRRS Supported: Yes (Seamless), DRRS_State: DRRS_LOW_RR, Vrefresh: 40 CRTC 2: Output: HDMI, DRRS Supported : No, VBT DRRS_type: Seamless V3: [By Ram]: Readability is improved. Another error case is covered [Daniel] V4: [By Ram]: Current status of the Idleness DRRS along with the Front buffer bits are added to the debugfs. [Rodrigo] V5: [By Ram]: Rephrased to make it easy to understand. And format is modified. [Rodrigo] V6: [By Ram]: Modeset mutex are acquired for each crtc along with renaming the Idleness detection states [Daniel] Signed-off-by:
Vandana Kannan <vandana.kannan@intel.com> Signed-off-by:
-
Neil Roberts authored
Adds a parameter which can be used with DRM_I915_GETPARAM to query the GPU revision. The intention is to use this in Mesa to implement the WaDisableSIMD16On3SrcInstr workaround on Skylake but only for revision 2. Signed-off-by:
Neil Roberts <neil@linux.intel.com> Signed-off-by:
-
Ander Conselvan de Oliveira authored
When logging that full mode switch is necessary, log which connector, encoder or crtc has caused it, so it is easier to figure out what is goind on by just looking at the log. Signed-off-by:
Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by:
-
Ander Conselvan de Oliveira authored
We have similar macros for crtcs and encoders, and the pattern happens often enough to justify the macro. Signed-off-by:
-
Ander Conselvan de Oliveira authored
In the path were there is no state to duplicate, the allocated crtc state wouldn't have the crtc backpointer initialized. Signed-off-by:
-
Ville Syrjälä authored
The current minimum vco frequency leaves us with a gap in our supported frequencies at 233-243 MHz. Your typical 2560x1440@60 display wants a pixel clock of 241.5 MHz, which is just withing that gap. Reduce the allowed vco min frequency to 4.8GHz to reduce the gap to 233-240 MHz, and thus allow such displays to work. 4.8 GHz is actually the documented (at least in some docs) limit of the PLL, and we just picked 4.86 GHz originally because that was the lowest value produced by the PLL spreadsheet, which obviously didn't consider 2560x1440 displays. Signed-off-by:
Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com> Signed-off-by:
-
Paulo Zanoni authored
We need this for FBC, and possibly for PSR too. v2: Don't only flush: invalidate too (Daniel). Signed-off-by:
-
Paulo Zanoni authored
We want to port FBC to the frontbuffer tracking infrastructure, but for that we need to know what caused the object invalidation so we can react accordingly: CPU mmaps need manual, GTT mmaps and flips don't need handling and ring rendering needs nukes. v2: - s/ORIGIN_RENDER/ORIGIN_CS/ (Daniel, Rodrigo) - Fix copy/pasted wrong documentation - Rebase v3: - Rebase v4: - Don't pass the operation to flushes (Daniel). Signed-off-by: -
Daniel Vetter authored
This reverts commit 3f678c96. We've been a bit too optimistic with this one here :( The trouble is that internally we're still using these plane update/disable hooks. Which was totally ok pre-atomic since the drm core did all the book-keeping updating and these just mostly updated hw state. But with atomic there's lots more going on, and it causes heaps of trouble with the load detect code. This one specifically cause a deadlock since both the load detect code and the nested plane atomic helper functions tried to grab the same locks. It only blows up because of the evil tricks though we play with the implicit ww acquire context. Applying this revert unearths the NULL deref on already freed framebuffer objects reported as a regression in 4.0 by various people. Fixing this will be fairly invasive, hence revert even for the 4.1-next queue. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Bolle <pebolle@tiscali.nl> Acked-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Damien Lespiau authored
This translation entry was updated after electrical validation by the hw team. The other entries are removed from existence as they aren't validated and because the sole use of a certain type of level shifter for SKL products is anticipated. v2: Remove all the other entries and force the use of the 800mv+2dB config (Sonika) Suggested-by:Damien Lespiau <damien.lespiau@intel.com> Reviewed-by:
-
Damien Lespiau authored
Implicit usage of local variables in macros isn't exactly the greatest thing in the world, especially when that variable is the drm device and we want to move towards a broader use of the i915 device structure. Let's make for_each_sprite() take dev_priv as its first argument then. Suggested-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Damien Lespiau authored
Implicit usage of local variables in macros isn't exactly the greatest thing in the world, especially when that variable is the drm device and we want to move towards a broader use of the i915 device structure. Let's make for_each_plane() take dev_priv as its first argument then. Suggested-by:
-
Daniel Vetter authored
With the two-step reset counter increments which braket the actual reset code and the subsequent wake-up we're guaranteeing that all the lockless waiters _will_ be woken up. And since we unconditionally bail out of waits with -EAGAIN (or -EIO) in that case there is not risk of lost interrupt enabling bits when the lockless wait code races against a gpu reset. Let's remove this FIXME as resolved then. Signed-off-by:
-
Yannick Guerrini authored
Change 'mutliple' to 'multiple' Change 'mutlipler' to 'multiplier' Change 'Haswel' to 'Haswell' Signed-off-by:
Yannick Guerrini <yguerrini@tomshardware.fr> Signed-off-by:
-
Matt Roper authored
plane->fb is a legacy pointer that not always be up-to-date (or updated early enough). Make sure the watermark code uses plane->state->fb so that we're always doing our calculations based on the correct framebuffers. This patch was generated by Coccinelle with the following semantic patch: @@ struct drm_plane *P; @@ - P->fb + P->state->fb v2: Rebase Signed-off-by: -
Matt Roper authored
The cursor size fields in intel_crtc just duplicate the data from cursor->state.crtc_{w,h} so we don't need them any more. Worse, their use in the watermark code actually introduces a subtle bug since they don't get updated to mirror the state values until the plane commit stage, which is *after* we've already used them to calculate new watermark values. This happens because we had to move watermark updates slightly earlier (outside vblank evasion) in commit commit 32b7eeec Author: Matt Roper <matthew.d.roper@intel.com> Date: Wed Dec 24 07:59:06 2014 -0800 drm/i915: Refactor work that can sleep out of commit (v7) Dropping the intel_crtc fields and just using the state values (which are properly updated by the time watermark updates happen) should solve the problem. Aside from the actual removal of the struct fields (which are formatted in a way that I couldn't figure out how to match in Coccinelle), the rest of this patch was generated via the following semantic patch: // Drop assignment @@ struct intel_crtc *C; struct drm_plane_state S; @@ ( - C->cursor_width = S.crtc_w; | - C->cursor_height = S.crtc_h; ) // Replace usage @@ struct intel_crtc *C; expression E; @@ ( - C->cursor_width + C->base.cursor->state->crtc_w | - C->cursor_height + C->base.cursor->state->crtc_h | - to_intel_crtc(E)->cursor_width + E->cursor->state->crtc_w | - to_intel_crtc(E)->cursor_height + E->cursor->state->crtc_h ) v2: Rebase Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joe Konno <joe.konno@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89346Signed-off-by:
-
- 11 Mar, 2015 1 commit
-
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Another pile of misc drm patches all over, mostly polish for atomic. Last minute rebase was to avoid the broken merge. * tag 'topic/drm-misc-2015-03-10' of git://anongit.freedesktop.org/drm-intel: drm: Check in setcrtc if the primary plane supports the fb pixel format drm: Lighten sysfs connector 'status' drm/plane-helper: unexport drm_primary_helper_create_plane drm: Share plane pixel format check code between legacy and atomic drm: Fix trivial typos in comments drm/dp: add DPCD definitions from eDP 1.4 drm/dp: add DPCD definitions from DP 1.1 and 1.2a drm: Fixup racy refcounting in plane_force_disable drm/i915: Rotation property is now handled in DRM core drm: Complete moving rotation property to core drm/dp: add DPCD definitions from eDP 1.2 drm/dp: indentation and ordering cleanups drm/atomic-helper: Fix kerneldoc for prepare_planes drm: Remove redundant code in the getencoder ioctl
-
- 10 Mar, 2015 14 commits
-
-
Laurent Pinchart authored
Drivers implementing the universal planes API report the list of supported pixel formats for the primary plane. Make sure the fb passed to the setcrtc ioctl is compatible. Drivers not implementing the universal planes API will have no format reported for the primary plane, skip the check in that case. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Chris Wilson authored
Since the beginning, sysfs/connector/status has done a heavyweight detection of the current connector status. But no user, such as upowerd or logind, has ever desired to initiate a probe. Move the probing into a new attribute so that existing readers get the behaviour they desire. v2: David Herrmann suggested using "echo detect > /sys/.../status" to trigger the probing, which is a fine idea. This extends that to also allow the user to apply the force detection overrides at runtime. v3: Now with airlied's email address fixed! Requires sysfs_streq() Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Daniel Vetter authored
We shouldn't tempt driver writers into using this since it uses a default format list which is likely wrong. And when that's done we can simplify the code a bit, too. Noticed while reviewing a patch from Laurent. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Laurent Pinchart authored
Both the legacy and atomic helpers need to check whether a plane supports a given pixel format. The code is currently duplicated, share it. Signed-off-by:
-
Yannick Guerrini authored
Change 'pixes' to 'pixels' Change 'enabel' to 'enable' Change 'enabeling' to 'enabling' Signed-off-by:
-
Jani Nikula authored
Add a number of DPCD definitions from eDP 1.4. v2: s/DP_ALPM_LOCK_TIMEOUT_ERROR_STATUS/DP_ALPM_LOCK_TIMEOUT_ERROR/ (Sonika) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Jani Nikula authored
Add a number of DPCD definitions from DP 1.1 and 1.2a. v2: drop wrong DP version reference, rename DP training set macros (Sonika). Reviewed-by:
-
Daniel Vetter authored
Originally it was impossible to be dropping the last refcount in this function since there was always one around still from the idr. But in commit 83f45fc3 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Aug 6 09:10:18 2014 +0200 drm: Don't grab an fb reference for the idr we've switched to weak references, broke that assumption but forgot to fix it up. Since we still force-disable planes it's only possible to hit this when racing multiple rmfb with fbdev restoring or similar evil things. As long as userspace is nice it's impossible to hit the BUG_ON. But the BUG_ON would most likely be hit from fbdev code, which usually invovles the console_lock besides all modeset locks. So very likely we'd never get the bug reports if this was hit in the wild, hence better be safe than sorry and backport. Spotted by Matt Roper while reviewing other patches. Cc: stable@vger.kernel.org Cc: Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
So no need to have code which never gets called in the driver. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
Tvrtko Ursulin authored
Commit 1da30627 "drm: Add rotation value to plane state" moved the rotation property to DRM core but only did the set property part. This does the get property part as well. Signed-off-by:
-
Jani Nikula authored
Mostly display control related DPCD addresses. Signed-off-by:
-
Jani Nikula authored
Keep the DPCD macros ordered by address, and make indentation conform to the rest of the file. commit e045d20b Author: Sonika Jindal <sonika.jindal@intel.com> Date: Thu Feb 19 13:16:44 2015 +0530 drm: Adding edp1.4 specific dpcd macros Signed-off-by:
-
Daniel Vetter authored
Copypaste-fail from cleanup_planes. Reported by Tvrtko. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Daniel Vetter authored
When enabling atomic state object for this ioctl in commit abd69c55 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Nov 25 23:50:05 2014 +0100 drm: Handle atomic state properly in kms getfoo ioctl I've forgotten to remove this hunk in one of the later revisions. drm_encoder_get_crtc already does this. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
- 09 Mar, 2015 1 commit
-
-
Ville Syrjälä authored
commit a8c6ecb3 Merge: 8dd0eb35 9eccca08 Author: Dave Airlie <airlied@redhat.com> Date: Mon Mar 9 19:58:30 2015 +1000 Merge tag 'v4.0-rc3' into drm-next managed to pick the wrong code to resolve the conflict and left us with a mutex_lock(struct_mutex) without the mutex_unlock(struct_mutex) leading to a deadlock. Fix the problem by recovering the correct code which doesn't need the lock. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
