- 04 Jun, 2015 6 commits
-
-
Paolo Bonzini authored
The hflags field will contain information about system management mode and will be useful for the emulator. Pass the entire field rather than just the guest-mode information. Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
SMBASE is only readable from SMM for the VCPU, but it must be always accessible if userspace is accessing it. Thus, all functions that read MSRs are changed to accept a struct msr_data; the host_initiated and index fields are pre-initialized, while the data field is filled on return. Reviewed-by:
-
Paolo Bonzini authored
We will want to filter away MSR_IA32_SMBASE from the emulated_msrs if the host CPU does not support SMM virtualization. Introduce the logic to do that, and also move paravirt MSRs to emulated_msrs for simplicity and to get rid of KVM_SAVE_MSRS_BEGIN. Reviewed-by:
-
Paolo Bonzini authored
This was noticed by Radim while reviewing the implementation of system management mode. Signed-off-by: -
Paolo Bonzini authored
Malicious (or egregiously buggy) userspace can trigger it, but it should never happen in normal operation. Signed-off-by: -
Paolo Bonzini authored
VFIO has proved itself a much better option than KVM's built-in device assignment. It is mature, provides better isolation because it enforces ACS, and even the userspace code is being tested on a wider variety of hardware these days than the legacy support. Disable legacy device assignment by default. Signed-off-by:
-
- 03 Jun, 2015 1 commit
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-20150602' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next KVM: s390: Fix and cleanup for 4.2 (kvm/next) One small fix for a commit targetted for 4.2 and one cleanup regarding our printks.
-
- 02 Jun, 2015 2 commits
-
-
David Hildenbrand authored
Let's remove "kvm-s390" from our printk messages and make use of pr_fmt instead. Also replace one printk() occurrence by a equivalent pr_warn on the way. Suggested-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
-
David Hildenbrand authored
Thinking about it, I can't find a real use case where we want to block a VCPU and not kick it out of SIE. (except if we want to do the same in batch for multiple VCPUs - but that's a micro optimization) So let's simply perform the exit_sie() calls directly when setting the other magic block bits in the SIE. Otherwise e.g. kvm_s390_set_tod_low() still has other VCPUs running after that call, working with a wrong epoch. Fixes: 27406cd5 ("KVM: s390: provide functions for blocking all CPUs") Acked-by:
-
- 29 May, 2015 3 commits
-
-
Marcelo Tosatti authored
Initialize kvmclock base, on kvmclock system MSR write time, so that the guest sees kvmclock counting from zero. This matches baremetal behaviour when kvmclock in guest sets sched clock stable. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> [Remove unnecessary comment. - Paolo] Signed-off-by:
-
Luiz Capitulino authored
If you try to enable NOHZ_FULL on a guest today, you'll get the following error when the guest tries to deactivate the scheduler tick: WARNING: CPU: 3 PID: 2182 at kernel/time/tick-sched.c:192 can_stop_full_tick+0xb9/0x290() NO_HZ FULL will not work with unstable sched clock CPU: 3 PID: 2182 Comm: kworker/3:1 Not tainted 4.0.0-10545-gb9bb6fb7 #204 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: events flush_to_ldisc ffffffff8162a0c7 ffff88011f583e88 ffffffff814e6ba0 0000000000000002 ffff88011f583ed8 ffff88011f583ec8 ffffffff8104d095 ffff88011f583eb8 0000000000000000 0000000000000003 0000000000000001 0000000000000001 Call Trace: <IRQ> [<ffffffff814e6ba0>] dump_stack+0x4f/0x7b [<ffffffff8104d095>] warn_slowpath_common+0x85/0xc0 [<ffffffff8104d146>] warn_slowpath_fmt+0x46/0x50 [<ffffffff810bd2a9>] can_stop_full_tick+0xb9/0x290 [<ffffffff810bd9ed>] tick_nohz_irq_exit+0x8d/0xb0 [<ffffffff810511c5>] irq_exit+0xc5/0x130 [<ffffffff814f180a>] smp_apic_timer_interrupt+0x4a/0x60 [<ffffffff814eff5e>] apic_timer_interrupt+0x6e/0x80 <EOI> [<ffffffff814ee5d1>] ? _raw_spin_unlock_irqrestore+0x31/0x60 [<ffffffff8108bbc8>] __wake_up+0x48/0x60 [<ffffffff8134836c>] n_tty_receive_buf_common+0x49c/0xba0 [<ffffffff8134a6bf>] ? tty_ldisc_ref+0x1f/0x70 [<ffffffff81348a84>] n_tty_receive_buf2+0x14/0x20 [<ffffffff8134b390>] flush_to_ldisc+0xe0/0x120 [<ffffffff81064d05>] process_one_work+0x1d5/0x540 [<ffffffff81064c81>] ? process_one_work+0x151/0x540 [<ffffffff81065191>] worker_thread+0x121/0x470 [<ffffffff81065070>] ? process_one_work+0x540/0x540 [<ffffffff8106b4df>] kthread+0xef/0x110 [<ffffffff8106b3f0>] ? __kthread_parkme+0xa0/0xa0 [<ffffffff814ef4f2>] ret_from_fork+0x42/0x70 [<ffffffff8106b3f0>] ? __kthread_parkme+0xa0/0xa0 ---[ end trace 06e3507544a38866 ]--- However, it turns out that kvmclock does provide a stable sched_clock callback. So, let the scheduler know this which in turn makes NOHZ_FULL work in the guest. Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by:
-
Marcelo Tosatti authored
Setting sched clock stable for kvmclock causes the printk timestamps to not start from zero, which is different from baremetal and can possibly break userspace. Add a flag to indicate that hypervisor sets clock base at zero when kvmclock is initialized. Signed-off-by:
-
- 28 May, 2015 10 commits
-
-
Andrew Morton authored
arch/x86/kvm/mmu.c: In function 'kvm_mmu_pte_write': arch/x86/kvm/mmu.c:4256: error: unknown field 'cr0_wp' specified in initializer arch/x86/kvm/mmu.c:4257: error: unknown field 'cr4_pae' specified in initializer arch/x86/kvm/mmu.c:4257: warning: excess elements in union initializer ... gcc-4.4.4 (at least) has issues when using anonymous unions in initializers. Fixes: edc90b7d ("KVM: MMU: fix SMAP virtualization") Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Paolo Bonzini authored
Signed-off-by: -
Jan Kiszka authored
There is no reason to deny this feature to guests. We are emulating the APIC timer, thus are exposing it without stops in power-saving states. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Radim Krčmář authored
Logical x2APIC stops working if we rewrite it with zeros. The best references are SDM April 2015: 10.12.10.1 Logical Destination Mode in x2APIC Mode [...], the LDR are initialized by hardware based on the value of x2APIC ID upon x2APIC state transitions. and SDM April 2015: 10.12.10.2 Deriving Logical x2APIC ID from the Local x2APIC ID The LDR initialization occurs whenever the x2APIC mode is enabled Signed-off-by: Radim KrÄmáÅ
™ <rkrcmar@redhat.com> Signed-off-by: -
Radim Krčmář authored
SDM April 2015, 10.12.5 State Changes From xAPIC Mode to x2APIC Mode • Any APIC ID value written to the memory-mapped local APIC ID register is not preserved. Fix it by sourcing vcpu_id (= initial APIC ID) instead of memory-mapped APIC ID. Proper use of apic functions would result in two calls to recalculate_apic_map(), so this patch makes a new helper. Signed-off-by: Radim KrÄmáÅ
™ <rkrcmar@redhat.com> Signed-off-by: -
Marcelo Tosatti authored
The periodic kvmclock sync can be an undesired source of latencies. When running cyclictest on a guest, a latency spike is visible. With kvmclock periodic sync disabled, the spike is gone. Guests should use ntp which means the propagations of ntp corrections from the host clock are unnecessary. v2: -> Make parameter read-only (Radim) -> Return early on kvmclock_sync_fn (Andrew) Reported-and-tested-by:
-
Paolo Bonzini authored
Prepare for multiple address spaces this way, since a VCPU is not available where unaccount_shadowed is called. We will get to the right kvm_memslots struct through the role field in struct kvm_mmu_page. Reviewed-by:
Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Reviewed-by:
-
Paolo Bonzini authored
Most of the function that wrap it can be rewritten without it, except for gfn_to_pfn_prot. Just inline it into gfn_to_pfn_prot, and rewrite the other function on top of gfn_to_pfn_memslot*. Reviewed-by:
-
Paolo Bonzini authored
The memory slot is already available from gfn_to_memslot_dirty_bitmap. Isn't it a shame to look it up again? Plus, it makes gfn_to_page_many_atomic agnostic of multiple VCPU address spaces. Reviewed-by:
-
Paolo Bonzini authored
This lets the function access the new memory slot without going through kvm_memslots and id_to_memslot. It will simplify the code when more than one address space will be supported. Unfortunately, the "const"ness of the new argument must be casted away in two places. Fixing KVM to accept const struct kvm_memory_slot pointers would require modifications in pretty much all architectures, and is left for later. Reviewed-by:
-
- 26 May, 2015 4 commits
-
-
Paolo Bonzini authored
Prepare for the case of multiple address spaces. Reviewed-by:
-
Paolo Bonzini authored
Architecture-specific helpers are not supposed to muck with struct kvm_userspace_memory_region contents. Add const to enforce this. In order to eliminate the only write in __kvm_set_memory_region, the cleaning of deleted slots is pulled up from update_memslots to __kvm_set_memory_region. Reviewed-by:
-
Paolo Bonzini authored
kvm_memslots provides lockdep checking. Use it consistently instead of explicit dereferencing of kvm->memslots. Reviewed-by:
-
Paolo Bonzini authored
kvm_alloc_memslots is extracted out of previously scattered code that was in kvm_init_memslots_id and kvm_create_vm. kvm_free_memslot and kvm_free_memslots are new names of kvm_free_physmem and kvm_free_physmem_slot, but they also take an explicit pointer to struct kvm_memslots. This will simplify the transition to multiple address spaces, each represented by one pointer to struct kvm_memslots. Reviewed-by:
-
- 20 May, 2015 5 commits
-
-
Paolo Bonzini authored
Grab MPX bugfix, and fix conflicts against Rik's adaptive FPU deactivation patch. Signed-off-by: -
Liang Li authored
The MPX feature requires eager KVM FPU restore support. We have verified that MPX cannot work correctly with the current lazy KVM FPU restore mechanism. Eager KVM FPU restore should be enabled if the MPX feature is exposed to VM. Signed-off-by:
Yang Zhang <yang.z.zhang@intel.com> Signed-off-by:
Liang Li <liang.z.li@intel.com> [Also activate the FPU on AMD processors. - Paolo] Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
This reverts commit 4473b570. We'll use the hook again. Cc: stable@vger.kernel.org Signed-off-by:
-
Andrea Arcangeli authored
memslot->userfault_addr is set by the kernel with a mmap executed from the kernel but the userland can still munmap it and lead to the below oops after memslot->userfault_addr points to a host virtual address that has no vma or mapping. [ 327.538306] BUG: unable to handle kernel paging request at fffffffffffffffe [ 327.538407] IP: [<ffffffff811a7b55>] put_page+0x5/0x50 [ 327.538474] PGD 1a01067 PUD 1a03067 PMD 0 [ 327.538529] Oops: 0000 [#1] SMP [ 327.538574] Modules linked in: macvtap macvlan xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT iptable_filter ip_tables tun bridge stp llc rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xprtrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ipmi_devintf iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp dcdbas intel_rapl kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd pcspkr sb_edac edac_core ipmi_si ipmi_msghandler acpi_pad wmi acpi_power_meter lpc_ich mfd_core mei_me [ 327.539488] mei shpchp nfsd auth_rpcgss nfs_acl lockd grace sunrpc mlx4_ib ib_sa ib_mad ib_core mlx4_en vxlan ib_addr ip_tunnel xfs libcrc32c sd_mod crc_t10dif crct10dif_common crc32c_intel mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm drm ahci i2c_core libahci mlx4_core libata tg3 ptp pps_core megaraid_sas ntb dm_mirror dm_region_hash dm_log dm_mod [ 327.539956] CPU: 3 PID: 3161 Comm: qemu-kvm Not tainted 3.10.0-240.el7.userfault19.4ca4011.x86_64.debug #1 [ 327.540045] Hardware name: Dell Inc. PowerEdge R420/0CN7CM, BIOS 2.1.2 01/20/2014 [ 327.540115] task: ffff8803280ccf00 ti: ffff880317c58000 task.ti: ffff880317c58000 [ 327.540184] RIP: 0010:[<ffffffff811a7b55>] [<ffffffff811a7b55>] put_page+0x5/0x50 [ 327.540261] RSP: 0018:ffff880317c5bcf8 EFLAGS: 00010246 [ 327.540313] RAX: 00057ffffffff000 RBX: ffff880616a20000 RCX: 0000000000000000 [ 327.540379] RDX: 0000000000002014 RSI: 00057ffffffff000 RDI: fffffffffffffffe [ 327.540445] RBP: ffff880317c5bd10 R08: 0000000000000103 R09: 0000000000000000 [ 327.540511] R10: 0000000000000000 R11: 0000000000000000 R12: fffffffffffffffe [ 327.540576] R13: 0000000000000000 R14: ffff880317c5bd70 R15: ffff880317c5bd50 [ 327.540643] FS: 00007fd230b7f700(0000) GS:ffff880630800000(0000) knlGS:0000000000000000 [ 327.540717] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 327.540771] CR2: fffffffffffffffe CR3: 000000062a2c3000 CR4: 00000000000427e0 [ 327.540837] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 327.540904] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 327.540974] Stack: [ 327.541008] ffffffffa05d6d0c ffff880616a20000 0000000000000000 ffff880317c5bdc0 [ 327.541093] ffffffffa05ddaa2 0000000000000000 00000000002191bf 00000042f3feab2d [ 327.541177] 00000042f3feab2d 0000000000000002 0000000000000001 0321000000000000 [ 327.541261] Call Trace: [ 327.541321] [<ffffffffa05d6d0c>] ? kvm_vcpu_reload_apic_access_page+0x6c/0x80 [kvm] [ 327.543615] [<ffffffffa05ddaa2>] vcpu_enter_guest+0x3f2/0x10f0 [kvm] [ 327.545918] [<ffffffffa05e2f10>] kvm_arch_vcpu_ioctl_run+0x2b0/0x5a0 [kvm] [ 327.548211] [<ffffffffa05e2d02>] ? kvm_arch_vcpu_ioctl_run+0xa2/0x5a0 [kvm] [ 327.550500] [<ffffffffa05ca845>] kvm_vcpu_ioctl+0x2b5/0x680 [kvm] [ 327.552768] [<ffffffff810b8d12>] ? creds_are_invalid.part.1+0x12/0x50 [ 327.555069] [<ffffffff810b8d71>] ? creds_are_invalid+0x21/0x30 [ 327.557373] [<ffffffff812d6066>] ? inode_has_perm.isra.49.constprop.65+0x26/0x80 [ 327.559663] [<ffffffff8122d985>] do_vfs_ioctl+0x305/0x530 [ 327.561917] [<ffffffff8122dc51>] SyS_ioctl+0xa1/0xc0 [ 327.564185] [<ffffffff816de829>] system_call_fastpath+0x16/0x1b [ 327.566480] Code: 0b 31 f6 4c 89 e7 e8 4b 7f ff ff 0f 0b e8 24 fd ff ff e9 a9 fd ff ff 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 <48> f7 07 00 c0 00 00 55 48 89 e5 75 2a 8b 47 1c 85 c0 74 1e f0 Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Nicholas Krause authored
This makes the functions kvm_guest_cpu_init and kvm_init_debugfs static now due to having no external callers outside their declarations in the file, kvm.c. Signed-off-by:
Nicholas Krause <xerofoify@gmail.com> Signed-off-by:
-
- 19 May, 2015 9 commits
-
-
Paolo Bonzini authored
gfn_to_pfn_async is used in just one place, and because of x86-specific treatment that place will need to look at the memory slot. Hence inline it into try_async_pf and export __gfn_to_pfn_memslot. The patch also switches the subsequent call to gfn_to_pfn_prot to use __gfn_to_pfn_memslot. This is a small optimization. Finally, remove the now-unused async argument of __gfn_to_pfn. Signed-off-by: -
Paolo Bonzini authored
The argument to KVM_GET_DIRTY_LOG is a memslot id; it may not match the position in the memslots array, which is sorted by gfn. Cc: stable@vger.kernel.org Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Xiao Guangrong authored
CR0.CD and CR0.NW are not used by shadow page table so that need not adjust mmu if these two bit are changed Signed-off-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
-
Xiao Guangrong authored
Currently, whenever guest MTRR registers are changed kvm_mmu_reset_context is called to switch to the new root shadow page table, however, it's useless since: 1) the cache type is not cached into shadow page's attribute so that the original root shadow page will be reused 2) the cache type is set on the last spte, that means we should sync the last sptes when MTRR is changed This patch fixs this issue by drop all the spte in the gfn range which is being updated by MTRR Signed-off-by:
-
Xiao Guangrong authored
There are some bugs in current get_mtrr_type(); 1: bit 1 of mtrr_state->enabled is corresponding bit 11 of IA32_MTRR_DEF_TYPE MSR which completely control MTRR's enablement that means other bits are ignored if it is cleared 2: the fixed MTRR ranges are controlled by bit 0 of mtrr_state->enabled (bit 10 of IA32_MTRR_DEF_TYPE) 3: if MTRR is disabled, UC is applied to all of physical memory rather than mtrr_state->def_type Signed-off-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by:
-
Xiao Guangrong authored
Split kvm_unmap_rmapp and introduce kvm_zap_rmapp which will be used in the later patch Signed-off-by:
-
Xiao Guangrong authored
slot_handle_level and its helper functions are ready now, use them to clean up the code Signed-off-by:
-
Xiao Guangrong authored
There are several places walking all rmaps for the memslot so that introduce common functions to cleanup the code Signed-off-by:
-
Xiao Guangrong authored
It's used to abstract the code from kvm_handle_hva_range and it will be used by later patch Signed-off-by:
-
