- 14 Jun, 2012 18 commits
-
-
H Hartley Sweeten authored
Rename the 8255's private data structure from subdev_8255_struct to subdev_8255_private. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Instead of accessing the dev->subdevices directly as an array, use a pointer. This method is more common in the comedi subsystem. Signed-off-by:
-
H Hartley Sweeten authored
Replace the printk calls with dev_info, dev_warn, etc. Signed-off-by:
-
Peter Huewe authored
This patch cleans up the vb_device_info struct and the related functions. The cleanup decreases the size of the compiled module by about 10kB. == Remove fields in vb_device_info that are never read: == pOutputSelect pRGBSenseData pRGBSenseData2 pVideoSenseData pVideoSenseData2 pYCSenseData pYCSenseData2 CR49 pXGINew_I2CDefinition pCR2E pCR2F pCR46 pCR47 pCRD0 pCRDE pSR40 pSR41 pCR47 === Remove the corresponding 'constants' === XGI330_RGBSenseData XGI330_RGBSenseData2 XGI330_VideoSenseData XGI330_VideoSenseData2 XGI330_YCSenseData XGI330_YCSenseData2 XGI330_CR49 XG40_I2CDefinition XG21_CR2E XG21_CR2F XG21_CR46 XG21_CR47 XG27_CRD0 XG27_CRDE XGI330_OutputSelect == Remove 'constant fields' and replace constant value with #define == pSR07 = XGI330_SR07 -> 0x18 pSR1F = XGI330_SR1F -> 0 pSR23 = XGI330_SR23 -> 0xf6 pSR24 = XGI330_SR24 -> 0x0d pSR33 = XGI330_SR33 ->0 pCRT2Data_1_2 = XGI330_CRT2Data_1_2 -> 0 pCRT2Data_4_D = XGI330_CRT2Data_4_D -> 0 pCRT2Data_4_E = XGI330_CRT2Data_4_E -> 0 pCRT2Data_4_10 = XGI330_CRT2Data_4_10 -> 0x80 pSR36 = XG27_SR36 -> 0x30 pCR8F = &XG27_CR8F -> 0x0C pSR40 = XG27_SR40 -> 0x04 pSR41 = XG27_SR41 ->0x00 pSR31 = XGI330_SR31 -> 0xc0 pSR32 = XGI330_SR32 -> 0xc0 SR25 = XGI330_sr25 -> 0 (we only use XGI330_sr25[0]) == Constant fields with 'dead' code: == pSoftSetting is set to XGI330_SoftSetting = 0x30 -> if (*pVBInfo->pSoftSetting & SoftDRAMType) is never true since SoftDRAMType = 0x80 -> if (*pVBInfo->pSoftSetting & ModeSoftSetting) is never true since ModeSoftSetting = 0x04 --> remove the code, remove pSoftSetting, remove XGI330_SoftSetting pDVOSetting is set to XG21_DVOSetting = 0 -> if (((*pVBInfo->pDVOSetting) & 0xC0) == 0xC0) is never true --> remove the code, remove pDVOSetting, remove XG21_DVOSetting pXGINew_DRAMTypeDefinition is set to &XG40_DRAMTypeDefinition 0xFF -> if (*pVBInfo->pXGINew_DRAMTypeDefinition != 0x0C) is always true --> remove the if and remove pXGINew_DRAMTypeDefinition remove XG40_DRAMTypeDefinition == Replace pointer to unsigned char with unsigned char variable and assign value of referenced pointer: == pSR21 -> SR21, remove XGI330_SR21 pSR22 -> SR22, remove XGI330_SR22 pXGINew_CR97 -> XGINew_CR97, remove XG20_CR97, XG27_CR97 and Z11m_CR97 Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Peter Huewe authored
This patch replaces some of the XGI internal structs by their counterparts in the SiS driver. XGI330_LVDSDataStruct -> SiS_LVDSData XGI330_LCDDataStruct -> SiS_LCDData XGI330_CHTVDataStruct -> SiS_LVDSData Signed-off-by:
-
Peter Huewe authored
For TV Devices: The values taken from XGI_TVDelayList are always overwritten with the values from XGI_TVDelayList2 since the if condition for using the values from XGI_TVDelayList2 is identical with the check to enter this scope and thus always true. The delay values in XGI_TVDelayList2 is always 0x22 so we can simply replace it with this constant value. For LCD Devices: The LCD_DelayCompensation field is always set to 0x12 so we can simply replace this field with a constant value. This saves about 500 bytes in compiled size. Signed-off-by:
-
Peter Huewe authored
Since XGI_CloseCRTC does not perform anything useful we can simply remove it. Signed-off-by:
-
Peter Huewe authored
This patch simplyfies the XGI_GetVCLK2Ptr a bit by moving the +=25 to a define and removing statements without effect. Signed-off-by:
-
Peter Huewe authored
This patch removes the arrays in XGI_GetVCLK2Ptr which each contain only one value four times and replaces them with their constant value. Signed-off-by:
-
Peter Huewe authored
Since the first three entries in XGINew_DDRDRAM_TYPE{340,20} are never used, we can simply remove them; and instead of passing XGINew_DDRDRAM_TYPE with an index we can simply pass the value directly to XGINew_SetDRAMSize20Reg. Signed-off-by: -
Peter Huewe authored
Since the function XGINew_SetDRAMSizingType is only called from one location and consist only of 2 valuable lines we can simply inline it here. Signed-off-by:
-
Peter Huewe authored
Since XGINew_SetDRAMSize20Reg now handles both cases we can remove the code duplication in XGINew_DDRSizing340. Signed-off-by:
-
Peter Huewe authored
This patch consolidates the almost identical functions XGINew_SetDRAMSizeReg and XGINew_SetDRAMSize20Reg as they are implemented identically except one division factor. The changed factor is now reflected in the input data. Signed-off-by:
-
Peter Huewe authored
This patch removes all unnecessary, redundant and superfluous header includes from xgifb. Tested on hp t5325 (XGI Z11) Signed-off-by:
-
Peter Huewe authored
This patch adds a simple #include guard to vb_table.h Signed-off-by:
-
Peter Huewe authored
This adds a mutex for fb_mmap around smem_start and smem_len so the mutex inside the fb_mmap() is actually used. Changing of these fields before calling the framebuffer_register() are not mutexed. We check whether framebuffer_register has been called by reading fbinfo->count. See 537a1bf0 - "fbdev: add mutex for fb_mmap locking" by Krzysztof Helt for details. Signed-off-by:
-
Peter Huewe authored
This patch removes assignments to the fb_fix_screeninfo struct which are overwritten by the memset in XGIfb_get_fix() a few lines later. Since the name/id might be useful this was moved to XGIfb_get_fix(). Signed-off-by:
-
Anton Vorontsov authored
All the functionality is now supported by pstore and pstore_ram drivers. Signed-off-by:
Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Colin Cross <ccross@android.com> Signed-off-by:
-
- 13 Jun, 2012 22 commits
-
-
Anton Vorontsov authored
Having automatic updates seems pointless for production system, and even dangerous and thus counter-productive: 1. If we can mount pstore, or read files, we can as well read /proc/kmsg. So, there's little point in duplicating the functionality and present the same information but via another userland ABI; 2. Expecting the kernel to behave sanely after oops/panic is naive. It might work, but you'd rather not try it. Screwed up kernel can do rather bad things, like recursive faults[1]; and pstore rather provoking bad things to happen. It uses: 1. Timers (assumes sane interrupts state); 2. Workqueues and mutexes (assumes scheduler in a sane state); 3. kzalloc (a working slab allocator); That's too much for a dead kernel, so the debugging facility itself might just make debugging harder, which is not what we want. Maybe for non-oops message types it would make sense to re-enable automatic updates, but so far I don't see any use case for this. Even for tracing, it has its own run-time/normal ABI, so we're only interested in pstore upon next boot, to retrieve what has gone wrong with HW or SW. So, let's disable the updates by default. [1] BUG: unable to handle kernel paging request at fffffffffffffff8 IP: [<ffffffff8104801b>] kthread_data+0xb/0x20 [...] Process kworker/0:1 (pid: 14, threadinfo ffff8800072c0000, task ffff88000725b100) [... Call Trace: [<ffffffff81043710>] wq_worker_sleeping+0x10/0xa0 [<ffffffff813687a8>] __schedule+0x568/0x7d0 [<ffffffff8106c24d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81087e22>] ? call_rcu_sched+0x12/0x20 [<ffffffff8102b596>] ? release_task+0x156/0x2d0 [<ffffffff8102b45e>] ? release_task+0x1e/0x2d0 [<ffffffff8106c24d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81368ac4>] schedule+0x24/0x70 [<ffffffff8102cba8>] do_exit+0x1f8/0x370 [<ffffffff810051e7>] oops_end+0x77/0xb0 [<ffffffff8135c301>] no_context+0x1a6/0x1b5 [<ffffffff8135c4de>] __bad_area_nosemaphore+0x1ce/0x1ed [<ffffffff81053156>] ? ttwu_queue+0xc6/0xe0 [<ffffffff8135c50b>] bad_area_nosemaphore+0xe/0x10 [<ffffffff8101fa47>] do_page_fault+0x2c7/0x450 [<ffffffff8106e34b>] ? __lock_release+0x6b/0xe0 [<ffffffff8106bf21>] ? mark_held_locks+0x61/0x140 [<ffffffff810502fe>] ? __wake_up+0x4e/0x70 [<ffffffff81185f7d>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff81158970>] ? pstore_register+0x120/0x120 [<ffffffff8136a37f>] page_fault+0x1f/0x30 [<ffffffff81158970>] ? pstore_register+0x120/0x120 [<ffffffff81185ab8>] ? memcpy+0x68/0x110 [<ffffffff8115875a>] ? pstore_get_records+0x3a/0x130 [<ffffffff811590f4>] ? persistent_ram_copy_old+0x64/0x90 [<ffffffff81158bf4>] ramoops_pstore_read+0x84/0x130 [<ffffffff81158799>] pstore_get_records+0x79/0x130 [<ffffffff81042536>] ? process_one_work+0x116/0x450 [<ffffffff81158970>] ? pstore_register+0x120/0x120 [<ffffffff8115897e>] pstore_dowork+0xe/0x10 [<ffffffff81042594>] process_one_work+0x174/0x450 [<ffffffff81042536>] ? process_one_work+0x116/0x450 [<ffffffff81042e13>] worker_thread+0x123/0x2d0 [<ffffffff81042cf0>] ? manage_workers.isra.28+0x120/0x120 [<ffffffff81047d8e>] kthread+0x8e/0xa0 [<ffffffff8136ba74>] kernel_thread_helper+0x4/0x10 [<ffffffff8136a199>] ? retint_restore_args+0xe/0xe [<ffffffff81047d00>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8136ba70>] ? gs_change+0xb/0xb Code: be e2 00 00 00 48 c7 c7 d1 2a 4e 81 e8 bf fb fd ff 48 8b 5d f0 4c 8b 65 f8 c9 c3 0f 1f 44 00 00 48 8b 87 08 02 00 00 55 48 89 e5 <48> 8b 40 f8 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 RIP [<ffffffff8104801b>] kthread_data+0xb/0x20 RSP <ffff8800072c1888> CR2: fffffffffffffff8 ---[ end trace 996a332dc399111d ]--- Fixing recursive fault but reboot is needed! Signed-off-by:
-
Anton Vorontsov authored
There is no behavioural change, the default value is still 60 seconds. Signed-off-by:
-
Anton Vorontsov authored
The code tried to maintain the global list of persistent ram zones, which isn't a great idea overall, plus since Android's ram_console is no longer there, we can remove some unused functions. Signed-off-by:
-
Anton Vorontsov authored
Suggested-by:
Shuah Khan <shuahkhan@gmail.com> Signed-off-by:
-
Anton Vorontsov authored
Since we use multiple regions, the messages are somewhat annoying. We do print total mapped memory already, so no need to print the information for each region in the library routines. Signed-off-by:
-
Anton Vorontsov authored
The console log size is configurable via ramoops.console_size module option, and the log itself is available via <pstore-mount>/console-ramoops file. Signed-off-by:
-
Anton Vorontsov authored
This will help make code clearer when we'll add support for other message types. The patch also changes return value from -EINVAL to 0 in case of end-of-records. The exact value doesn't matter for pstore (it should be just <= 0), but 0 feels more correct. Signed-off-by:
-
Anton Vorontsov authored
This will help make code clearer when we'll add support for other message types. This also makes probe() much shorter and understandable, plus makes mem/record size checking a bit easier. Implementation detail: we now use a paddr pointer, this will be used for allocating persistent ram zones for other message types. Signed-off-by:
-
Anton Vorontsov authored
We're about to add support for other message types, so let's rename some variables to not be confused later. Signed-off-by:
-
Anton Vorontsov authored
Pstore doesn't support logging kernel messages in run-time, it only dumps dmesg when kernel oopses/panics. This makes pstore useless for debugging hangs caused by HW issues or improper use of HW (e.g. weird device inserted -> driver tried to write a reserved bits -> SoC hanged. In that case we don't get any messages in the pstore. Therefore, let's add a runtime logging support: PSTORE_TYPE_CONSOLE. Signed-off-by:
-
Greg Kroah-Hartman authored
We need this for the pstore fixes that went into the staging-linus branch, so that things apply properly for the pstore/android code merge. Signed-off-by: -
Anton Vorontsov authored
There's no reason to extern it. The patch fixes the annoying sparse warning: CHECK fs/pstore/inode.c fs/pstore/inode.c:264:5: warning: symbol 'pstore_fill_super' was not declared. Should it be static? Signed-off-by:
-
Anton Vorontsov authored
Otherwise, unlinked file will reappear on the next boot. Reported-by:
-
Anton Vorontsov authored
A handy function that we will use outside of ram_core soon. But so far just factor it out and start using it in post_init(). Signed-off-by:
-
Anton Vorontsov authored
Otherwise, the files will survive just one reboot, and on a subsequent boot they will disappear. Signed-off-by:
-
Anton Vorontsov authored
Without the update, we'll only see the new dmesg buffer after the reboot, but previously we could see it right away. Making an oops visible in pstore filesystem before reboot is a somewhat dubious feature, but removing it wasn't an intentional change, so let's restore it. For this we have to make persistent_ram_save_old() safe for calling multiple times, and also extern it. Signed-off-by:
-
Devendra Naga authored
Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Signed-off-by:
-
H Hartley Sweeten authored
All of the config options for comedi depend on COMEDI being selected. Wrap everything in an 'if COMEDI/endif' block and remove all the individual 'depends on COMEDI' in the Kconfig. Also, remove the redundant && ISA/PCI/PCMCIA/USB for the if blocks with those driver types. Signed-off-by:
-
Chris Yungmann authored
Signed-off-by:
Chris Yungmann <yungmann.chris@gmail.com> Signed-off-by:
-
William Blair authored
Added a do ... while (0) to a multi statement macro and reformatted a similar macro. Signed-off-by:
William Blair <wdblair@bu.edu> Signed-off-by:
-
Peter Meerwald authored
Signed-off-by:
Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by:
-
Peter Meerwald authored
Signed-off-by:
-
