- 23 Jul, 2019 22 commits
-
-
Marko Kohtala authored
Some displays have dimensions that are not multiple of eight, for example height of 36, but the driver divided the dimensions by 8. Defining display to the next multiple of 8 is not good as then the display registers get configured to dimensions that do not match. This contradicts intructions by some display manufacturers. Use DIV_ROUND_UP to multiple of 8 when needed so correct values can be used. The ssd1307fb_update_display bit reordering receives a simplification in the process. Signed-off-by:
Marko Kohtala <marko.kohtala@okoko.fi> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-5-marko.kohtala@okoko.fi
-
Marko Kohtala authored
The page_offset was only applied to the end of the page range. This caused the display updates to cause a scrolling effect on the display because the amount of data written to the display did not match the range display expected. Fixes: 301bc067 ("video: ssd1307fb: Make use of horizontal addressing mode") Signed-off-by:
-
Marko Kohtala authored
coccicheck reported unneeded semicolons. Remove them. Signed-off-by:
-
Marko Kohtala authored
sparse reported incorrect type due to different address spaces. The screen_base is __iomem, but the memory is not from a device so we can use screen_buffer instead and avoid some type casts. Signed-off-by:
-
Fuqian Huang authored
In commit 518a2f19 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So memset is not needed. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Signed-off-by:
-
Souptick Joarder authored
This is dead code since 3.15. If there is no plan to use it further, this can be removed forever. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by:
-
Souptick Joarder authored
Minor cleanup to remove extra return statement. Signed-off-by:
-
Christoph Hellwig authored
au1200fb allocates DMA memory using DMA_ATTR_NON_CONSISTENT, but never calls dma_cache_sync to synchronize the memory between the CPU and the device. If it was use on a not cache coherent bus that would be fatal, but as far as I can tell from the naming and the mips platform implementation it always is used in cache coherent systems. Remove the DMA_ATTR_NON_CONSISTENT flag, which is a no-op in that case. Signed-off-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by:
-
Colin Ian King authored
Variable err is initialized to a value that is never read and it is re-assigned later. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Noralf Trønnes authored
tinydrm_display_pipe_init() has only one user now, so move it to mipi-dbi. Changes: - Remove drm_connector_helper_funcs.detect, it's always connected. - Store the connector and mode in mipi_dbi instead of it's own struct. Otherwise remove some leftover tinydrm-helpers.h inclusions. Cc: Eric Anholt <eric@anholt.net> Cc: David Lechner <david@lechnology.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-12-noralf@tronnes.org
-
Noralf Trønnes authored
The MIPI DBI standard support more pixel formats than what this helper supports. Add an init function that lets the driver use different format(s). This avoids open coding mipi_dbi_init() in st7586. st7586 sets preferred_depth but this is not necessary since it only supports one format. v2: Forgot to remove the mipi->rotation assignment in st7586, mipi_dbi_init_with_formats() handles it. Cc: David Lechner <david@lechnology.com> Acked-by:David Lechner <david@lechnology.com> Signed-off-by:
-
Noralf Trønnes authored
tinydrm.ko is going away so let's implement a connector. Reviewed-by:
-
Noralf Trønnes authored
The tinydrm helper is going away so move it into the only user mipi-dbi. Reviewed-by:
-
Noralf Trønnes authored
This is only used by mipi-dbi drivers so move it there. The reason this isn't moved to the SPI subsystem is that it will in a later patch pass a dummy rx buffer for SPI controllers that need this. Low memory boards (64MB) can run into a problem allocating such a "large" contiguous buffer on every transfer after a long up time. This leaves a very specific use case, so we'll keep the function here. mipi-dbi will first go through a refactoring though, before this will be done. Remove SPI todo entry now that we're done with the tinydrm.ko SPI code. v2: Drop moving the mipi_dbi_spi_init() declaration (Sam) Cc: David Lechner <david@lechnology.com> Reviewed-by:
-
Noralf Trønnes authored
Prep work before moving the function to mipi-dbi. tinydrm_spi_transfer() was made to support one class of drivers in drivers/staging/fbtft that has not been converted to DRM yet, so strip away the unused functionality: - Start byte (header) is not used. - No driver relies on the automatic 16-bit byte swapping on little endian machines with SPI controllers only supporting 8 bits per word. Other changes: - No need to initialize ret - No need for the WARN since mipi-dbi only uses 8 and 16 bpw. - Use spi_message_init_with_transfers() Cc: David Lechner <david@lechnology.com> Acked-by:
-
Noralf Trønnes authored
spi-bcm2835 can handle >64kB buffers now so there is no need to check ->max_dma_len. The tinydrm_spi_max_transfer_size() max_len argument is not used by any callers, so not needed. Then we have the spi_max module parameter. It was added because staging/fbtft has support for it and there was a report that someone used it to set a small buffer size to avoid popping on a USB soundcard on a Raspberry Pi. In hindsight it shouldn't have been added, I should have waited for it to become a problem first. I don't know it anyone is actually using it, but since tinydrm_spi_transfer() is being moved to mipi-dbi, I'm taking the opportunity to remove it. I'll add it back to mipi-dbi if someone complains. With that out of the way, spi_max_transfer_size() can be used instead. The chosen 16kB buffer size for Type C Option 1 (9-bit) interface is somewhat arbitrary, but a bigger buffer will have a miniscule impact on transfer speed, so it's probably fine. Acked-by:
-
Noralf Trønnes authored
The SPI event tracing can dump the buffer now so no need for this. Remove the debug print from tinydrm_spi_transfer() since this info can be gleaned from the trace event. Reviewed-by:
-
Noralf Trønnes authored
This means that tinydrm_spi_bpw_supported() can be removed. Reviewed-by:
-
Noralf Trønnes authored
tinydrm drivers announce DRM_MODE_CONNECTOR_VIRTUAL for its SPI drivers. Use the new SPI connector type instead. X server will now list the connector as Unknown instead of Virtual: X.Org X Server 1.19.2 Release Date: 2017-03-02 <...> [ 53523.905] (II) modeset(0): Output Unknown19-1 has no monitor section [ 53523.908] (II) modeset(0): EDID for output Unknown19-1 [ 53523.910] (II) modeset(0): Printing probed modes for output Unknown19-1 [ 53523.911] (II) modeset(0): Modeline "320x240"x0.0 0.00 320 320 320 320 240 240 240 240 (0.0 kHz eP) [ 53523.911] (II) modeset(0): Output Unknown19-1 connected [ 53523.912] (II) modeset(0): Using exact sizes for initial modes [ 53523.912] (II) modeset(0): Output Unknown19-1 using initial mode 320x240 +0+0 I won't chase down and fix userspace, but the new connector type will trickle out to userspace eventually. v2: Split patch in core and driver changes, expand commit message (Daniel) Cc: David Lechner <david@lechnology.com> Reviewed-by:
-
Noralf Trønnes authored
tinydrm drivers announce DRM_MODE_CONNECTOR_VIRTUAL for its SPI drivers. Add a SPI connector type to match the actual connector. X will list the connector as Unknown: X.Org X Server 1.19.2 Release Date: 2017-03-02 <...> [ 53523.905] (II) modeset(0): Output Unknown19-1 has no monitor section [ 53523.908] (II) modeset(0): EDID for output Unknown19-1 [ 53523.910] (II) modeset(0): Printing probed modes for output Unknown19-1 [ 53523.911] (II) modeset(0): Modeline "320x240"x0.0 0.00 320 320 320 320 240 240 240 240 (0.0 kHz eP) [ 53523.911] (II) modeset(0): Output Unknown19-1 connected [ 53523.912] (II) modeset(0): Using exact sizes for initial modes [ 53523.912] (II) modeset(0): Output Unknown19-1 using initial mode 320x240 +0+0 The weston source shows that it will be listed as UNNAMED. v2: Split patch in core and driver changes, expand commit message (Daniel) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Daniel Vetter authored
It's dead code ever since commit 34280340 Author: Geert Uytterhoeven <geert+renesas@glider.be> Date: Fri Dec 4 17:01:43 2015 +0100 fbdev: Remove unused SH-Mobile HDMI driver Also with this gone we can remove the cea_modes db. This entire thing is massively incomplete anyway, compared to the CEA parsing that drm_edid.c does. Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Tavis Ormandy <taviso@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/arm/display/komeda/komeda_plane.c: In function komeda_plane_atomic_duplicate_state: drivers/gpu/drm/arm/display/komeda/komeda_plane.c:161:35: warning: variable old set but not used [-Wunused-but-set-variable It is not used since commit 990dee3a ("drm/komeda: Computing image enhancer internally") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190722055627.38008-1-yuehaibing@huawei.com
-
- 22 Jul, 2019 3 commits
-
-
Daniel Vetter authored
Maxime didn't really compile-test this :-/ We need to re-apply commit e4fa8457 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jun 14 22:35:25 2019 +0200 drm/prime: Align gem_prime_export with obj_funcs.export plus make sure i915_gem_dma_buf.c doesn't get zombie-resurrect. It moved in commit 10be98a7 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue May 28 10:29:49 2019 +0100 drm/i915: Move more GEM objects under gem/ v2: Remember the selftests (Chris). Fixes: 03b0f2ce ("Merge v5.3-rc1 into drm-misc-next") Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Fabio Estevam authored
Improve the help text for DRM_ANALOGIX_ANX78XX by adding the missing "power" word. After this change the help text matches with the ANX7814 product description from the Analogix website: https://www.analogix.com/en/products/convertersbridges/anx7814Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190722194049.20761-1-festevam@gmail.com
-
Maxime Ripard authored
Noralf needs some SPI patches in 5.3 to merge some work on tinydrm. Signed-off-by:Maxime Ripard <maxime.ripard@bootlin.com>
-
- 21 Jul, 2019 15 commits
-
-
Linus Torvalds authored
-
Hans de Goede authored
Add a modesetting driver for Grain Media GM12U320 based devices (primarily Acer C120 projector, but there may be compatible devices). This is based on the fb driver from Viacheslav Nurmekhamitov: https://github.com/slavrn/gm12u320 This driver uses drm_simple_display_pipe to deal with all the atomic stuff, gem_shmem_helper functions for buffer management and drm_fbdev_generic_setup for fbdev emulation, so that leaves the driver itself with only the actual code for talking to the gm12u320 chip, leading to a nice simple and clean driver. Changes in v2: -Add drm-misc tree to MAINTAINERS -Drop mode_config.preferred_depth = 24 / fix fbdev support Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190721132525.10396-1-hdegoede@redhat.com
-
Sam Ravnborg authored
After migrating several drivers to the generic fbdev emulation there are no users left of drm_gem_fbdev_fb_create. Delete the function. Noticed that there was no callers while browsing around in the drm_fb* code. The code that referenced the function was removed by: commit 13aff184 ("drm/qxl: remove dead qxl fbdev emulation code") The actual use was removed by: commit 26d4707d ("drm/qxl: use generic fbdev emulation") v2: - Updated changelog based on feedback from Noralf Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull Devicetree fixes from Rob Herring: "Fix several warnings/errors in validation of binding schemas" * tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object'
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs documentation typo fix from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: typo fix: it's d_make_root, not d_make_inode...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Two fixes for stable, one that had dependency on earlier patch in this merge window and can now go in, and a perf improvement in SMB3 open" * tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: flush before set-info if we have writeable handles smb3: optimize open to not send query file internal info cifs: copy_file_range needs to strip setuid bits and update timestamps CIFS: fix deadlock in cached root handling
-
Qian Cai authored
The commit b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f0 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
-
Mike Rapoport authored
The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch hexagon to use generic version of these functions. Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...
-
Al Viro authored
Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Rob Herring authored
Now that examples are validated against the DT schema, an error with required 'clocks' property missing is exposed: Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@40020000: gpio@0: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@1000: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@2000: 'clocks' is a required property Add the missing 'clocks' properties to the examples to fix the errors. Fixes: 2c9239c1 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Acked-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
Rob Herring <robh@kernel.org>
-
Rob Herring authored
With the conversion to DT schema, the examples are now compiled with dtc. The ad7124 binding example has the following warning: Documentation/devicetree/bindings/iio/adc/adi,ad7124.example.dts:19.11-21: \ Warning (reg_format): /example-0/adc@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) There's a default #size-cells and #address-cells values of 1 for examples. For examples needing different values such as this one on a SPI bus, they need to provide a SPI bus parent node. Fixes: 26ae15e6 ("Convert AD7124 bindings documentation to YAML format.") Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by:
-
Rob Herring authored
Now that examples are validated against the DT schema, a typo in avia-hx711 example generates a warning: Documentation/devicetree/bindings/iio/adc/avia-hx711.example.dt.yaml: weight: 'avdd-supply' is a required property Fix the typo. Fixes: 5150ec3f ("avia-hx711.yaml: transform DT binding to YAML") Cc: Andreas Klinger <ak@it-klinger.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by:
-
Rob Herring authored
The schema examples are now validated against the schema itself. The AST2500 pinctrl schema has a couple of errors: Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ pinctrl: aspeed,external-nodes: [[1, 2]] is too short Fixes: 0a617de1 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by:
Andrew Jeffery <andrew@aj.id.au> Signed-off-by:
-
Rob Herring authored
The Aspeed pinctl schema have errors in the 'compatible' schema: Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements Flow style sequences have to be quoted if the vales contain ','. Fix this by using the more common one line per entry formatting. Fixes: 0a617de1 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Fixes: 07457937 ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by:
-
