- 19 Jul, 2006 1 commit
-
-
Dmitry Torokhov authored
The start() method need to be called every time we create a new handle. This includes not only registering new devices but also when registering new handlers. Signed-off-by:Dmitry Torokhov <dtor@mail.ru>
-
- 15 Jul, 2006 3 commits
-
-
Dmitry Torokhov authored
Fixes Coverity #id 978 Signed-off-by: -
Andrew Morton authored
Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Przemek Iskra authored
Signed-off-by:
Vojtech Pavlik <vojtech@suse.cz> Signed-off-by:
-
- 07 Jul, 2006 3 commits
-
-
Dmitry Torokhov authored
Fixes Coverity #id 864 Signed-off-by: -
Dmitry Torokhov authored
This is more user-friendly and also fixes Coverity #id 249 Signed-off-by: -
Dmitry Torokhov authored
Fixes Coverity #id 916 Signed-off-by:
-
- 06 Jul, 2006 4 commits
-
-
Andrew Morton authored
Signed-off-by:
-
Dmitry Torokhov authored
Create input_inject_event() function which is to be used by input handlers as opposed to input_event() which is reserved for drivers implementing input devices. The difference is that if device is "grabbed" by some process input_inject_event() will ignore events unless sent from the handle that is currently owns the device. Signed-off-by: -
Dmitry Torokhov authored
The new start() method is called immediately after connect() and also when "grabbed" device is released by its owner. This will allow input handlers to re-synchronize state of once-grabbed device with the rest of devices. Signed-off-by: -
Dmitry Torokhov authored
This method used to enforce exclusive access to iforce devices, but presenlty there are no known users of this method. Signed-off-by:
-
- 05 Jul, 2006 3 commits
-
-
Andreas Schwab authored
Fix a typo in the toplevel makefile. Signed-off-by:
Andreas Schwab <schwab@suse.de> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
David Woodhouse authored
asm-powerpc/cputime.h doesn't declare jiffies64_to_cputime64() or cputime64_sub(), and due to CONFIG_VIRT_CPU_ACCOUNTING it's not picking up the definition from asm-generic like x86-64 & friends do. Cc: Dave Jones <davej@redhat.com> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Benjamin Herrenschmidt authored
With the new interrupt rework, an interrupt "host" map() callback can be called after the interrupt is already active. It's called again for an already mapped interrupt to allow changing the trigger setup, and currently this is not guarded with a test of wether the interrupt is requested or not. I plan to change some of this logic to be a bit less lenient against random reconfiguring of live interrupts but just not yet. The ported MPIC driver has a bug where when that happens, it will mask the interrupt. This changes it to preserve the previous masking of the interrupt instead. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
- 04 Jul, 2006 26 commits
-
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: Move workqueue exports to where the functions are defined. [CPUFREQ] Misc cleanups in ondemand. [CPUFREQ] Make ondemand sampling per CPU and remove the mutex usage in sampling path. [CPUFREQ] Add queue_delayed_work_on() interface for workqueues. [CPUFREQ] Remove slowdown from ondemand sampling path.
-
Linus Torvalds authored
No devfs_fs.h header any more.. Signed-off-by: -
git://git.infradead.org/hdrinstall-2.6Linus Torvalds authored
* git://git.infradead.org/hdrinstall-2.6: Remove export of include/linux/isdn/tpam.h Remove <linux/i2c-id.h> and <linux/i2c-algo-ite.h> from userspace export Restrict headers exported to userspace for SPARC and SPARC64 Add empty Kbuild files for 'make headers_install' in remaining arches. Add Kbuild file for Alpha 'make headers_install' Add Kbuild file for SPARC 'make headers_install' Add Kbuild file for IA64 'make headers_install' Add Kbuild file for S390 'make headers_install' Add Kbuild file for i386 'make headers_install' Add Kbuild file for x86_64 'make headers_install' Add Kbuild file for PowerPC 'make headers_install' Add generic Kbuild files for 'make headers_install' Basic implementation of 'make headers_check' Basic implementation of 'make headers_install'
-
Arjan van de Ven authored
There is a code sequence where the locking is substream->self_group.lock -> ins->scbs[index].lock substream->self_group.lock is interrupt safe, and taken from irq context as well (trace is snipped for brevity) so what can happen is cpu 0 cpu 1 user context user context take ins->scbs[index].lock without disabling interrupts get substream->self_group.lock (irqsafe) try to get ins->scbs[index].lock (spins) interrupt happens try to get substream->self_group.lock (spins) which is an obvious AB-BA deadlock fix is to just take the lock with _irqsafe Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: Jaroslav Kysela <perex@suse.cz> Acked-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Zach Brown authored
mthca: initialize send and receive queue locks separately lockdep identifies a lock by the call site of its initialization. By initializing the send and receive queue locks in mthca_wq_init() we confuse lockdep. It warns that that the ordered acquiry of both locks in mthca_modify_qp() is recursive acquiry of one lock: ============================================= [ INFO: possible recursive locking detected ] --------------------------------------------- modprobe/1192 is trying to acquire lock: (&wq->lock){....}, at: [<f892b4db>] mthca_modify_qp+0x60/0xa7b [ib_mthca] but task is already holding lock: (&wq->lock){....}, at: [<f892b4ce>] mthca_modify_qp+0x53/0xa7b [ib_mthca] Initializing the locks separately in mthca_alloc_qp_common() stops the warning and will let lockdep enforce proper ordering on paths that acquire both locks. Signed-off-by:Zach Brown <zach.brown@oracle.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Yasunori Goto authored
I found a bug in memory hot-add code for ia64. IA64's code has copies of pgdat's array on each node to reduce memory access over crossing node. This array is used by NODE_DATA() macro. When new node is hot-added, this pgdat's array should be updated and copied on new node too. However, I used for_each_online_node() in scatter_node_data() to copy it. This meant its array is not copied on new node. Because initialization of structures for new node was halfway, so online_node_map couldn't be set at this time. To copy arrays on new node, I changed it to check value of pgdat_list[] which is source array of copies. I tested this patch with my Memory Hotadd emulation on Tiger4. This patch is for 2.6.17-git20. Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
Greg Ungerer authored
Fix changed name of proc_task() to get_proc_task(). Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (44 commits) ACPI: remove function tracing macros from drivers/acpi/*.c ACPI: add support for Smart Battery ACPI: handle battery notify event on broken BIOS ACPI: handle AC notify event on broken BIOS ACPI: asus_acpi: add S1N WLED control ACPI: asus_acpi: correct M6N/M6R display nodes ACPI: asus_acpi: add S1N WLED control ACPI: asus_acpi: rework model detection ACPI: asus_acpi: support L5D ACPI: asus_acpi: handle internal Bluetooth / support W5A ACPI: asus_acpi: support A4G ACPI: asus_acpi: support W3400N ACPI: asus_acpi: LED display support ACPI: asus_acpi: support A3G ACPI: asus_acpi: misc cleanups ACPI: video: Remove unneeded acpi_handle from driver. ACPI: thermal: Remove unneeded acpi_handle from driver. ACPI: power: Remove unneeded acpi_handle from driver. ACPI: pci_root: Remove unneeded acpi_handle from driver. ACPI: pci_link: Remove unneeded acpi_handle from driver. ...
-
Linus Torvalds authored
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Ensure 8250_pci quirks are not marked __devinit [SERIAL] Convert fifosize to an unsigned int
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] Fix lh7a40x_udc.c [ARM] Fix warning in consistent.c [ARM] Fix warnings in arch/arm/kernel/setup.c [ARM] Fix ecard.c resource warnings. [ARM] Fix ISA IRQ resources [ARM] Fix bad asm instruction in proc-arm925.S [ARM] More missing proc-macros.S includes [ARM] 3708/2: fix SMP build after section ioremap changes
-
git://git.infradead.org/mtd-2.6Linus Torvalds authored
* git://git.infradead.org/mtd-2.6: [JFFS2][XATTR] Fix memory leak in POSIX-ACL support fs/jffs2/: make 2 functions static [MTD] NAND: Fix broken sharpsl driver [JFFS2][XATTR] Fix xd->refcnt race condition MTD: kernel-doc fixes + additions MTD: fix all kernel-doc warnings [MTD] DOC: Fixup read functions and do a little cleanup
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) [Bluetooth] Add RFCOMM role switch support [Bluetooth] Allow disabling of credit based flow control [Bluetooth] Small cleanup of the L2CAP source code [Bluetooth] Use real devices for host controllers [Bluetooth] Add platform device for virtual and serial devices [Bluetooth] Add automatic sniff mode support [Bluetooth] Correct SCO buffer size on request [Bluetooth] Add suspend/resume support to the HCI USB driver [Bluetooth] Use raw mode for the Frontline sniffer device [BRIDGE]: br_dump_ifinfo index fix [ATM]: add+use poison defines [NET]: add+use poison defines [IOAT]: fix kernel-doc in source files [IOAT]: fix header file kernel-doc [TG3]: Add ipv6 TSO feature [IPV6]: Fix ipv6 GSO payload length [TIPC] Fixed sk_buff panic caused by tipc_link_bundle_buf (REVISED) [NET]: Verify gso_type too in gso_segment [IPVS]: Add sysctl documentation [ROSE]: Try all routes when establishing a ROSE connections. ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (57 commits) [SCSI] fix error handling in scsi_io_completion [SCSI] qla1280: fix section mismatch warnings [SCSI] mptsas: eliminate ghost devices [SCSI] qla2xxx: make some more functions static [SCSI] small whitespace cleanup for qlogic driver [SCSI] mptbase: mpt_interrupt should return IRQ_NONE [SCSI] mptsas: make two functions static [SCSI] sg.c: Fix bad error handling in [SCSI] 53c700: fix breakage caused by the autosense update [SCSI] iscsi: add async notification of session events [SCSI] iscsi: pass target nr to session creation [SCSI] iscsi: break up session creation into two stages [SCSI] iscsi: rm channel usage from iscsi [SCSI] iscsi: fix session refcouting [SCSI] iscsi: convert iscsi_tcp to new set/get param fns [SCSI] iscsi: convert iser to new set/get param fns [SCSI] iscsi: fixup set/get param functions [SCSI] iscsi: add target discvery event to transport class [SCSI] st: remove unused st_buffer.in_use [SCSI] atp870u: reduce huge stack usage ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kbuild: introduce utsrelease.h kbuild: explicit turn off gcc stack-protector
-
Andrew Morton authored
Jiri reports that the stop_machin kthread conversion caused his machine to hang when suspending. Hyperthreading is apparently involved. I don't see why that would be and I can't reproduce it. Revert to the 2.6.17 code. Cc: "Serge E. Hallyn" <serue@us.ibm.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Heiko Carstens authored
================================= [ INFO: inconsistent lock state ] --------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&adapter->fsf_req_list_lock){++..}, at: [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178 {in-hardirq-W} state was registered at: [<000000000005fb0c>] __lock_acquire+0xad8/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a326>] _spin_lock+0x4e/0x68 [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178 [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430 [<0000000000219dd4>] tiqdio_thinint_handler+0xd20/0x213c [<000000000020229a>] do_adapter_IO+0xb2/0xc0 [<0000000000206f32>] do_IRQ+0x136/0x16c [<0000000000020462>] io_no_vtime+0x16/0x1c [<0000000000019432>] cpu_idle+0x222/0x250 irq event stamp: 129220 hardirqs last enabled at (129220): [<00000000000411e6>] tasklet_hi_action+0x5a/0x19c hardirqs last disabled at (129219): [<00000000000411c0>] tasklet_hi_action+0x34/0x19c softirqs last enabled at (129212): [<0000000000040b62>] __do_softirq+0x13a/0x180 softirqs last disabled at (129217): [<000000000001fd58>] do_softirq+0xec/0xf0 other info that might help us debug this: no locks held by swapper/0. stack backtrace: 00000000012bb670 0000000000000002 0000000000000000 00000000012bb780 00000000012bb6e8 0000000000399122 0000000000399122 0000000000016b0a 0000000000000000 0000000000000000 0000000000000000 00000000004660e8 0000000000000000 000000000000000d 00000000012bb6e0 00000000012bb758 0000000000368b90 0000000000016b0a 00000000012bb6e0 00000000012bb730 Call Trace: ([<0000000000016a26>] show_trace+0x76/0xdc) [<0000000000016b2c>] show_stack+0xa0/0xd0 [<0000000000016b8a>] dump_stack+0x2e/0x3c [<000000000005e3da>] print_usage_bug+0x27e/0x290 [<000000000005ea9c>] mark_lock+0x6b0/0x6c0 [<000000000005f33e>] __lock_acquire+0x30a/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a326>] _spin_lock+0x4e/0x68 [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178 [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430 [<0000000000217bd2>] tiqdio_tl+0xd02/0x2120 [<000000000004123a>] tasklet_hi_action+0xae/0x19c [<0000000000040ae4>] __do_softirq+0xbc/0x180 [<000000000001fd58>] do_softirq+0xec/0xf0 [<0000000000040c38>] irq_exit+0x90/0xa8 [<0000000000206f40>] do_IRQ+0x144/0x16c [<0000000000020462>] io_no_vtime+0x16/0x1c [<0000000000019432>] cpu_idle+0x222/0x250 ([<0000000000019416>] cpu_idle+0x206/0x250) [<000000000001405a>] rest_init+0x5a/0x68 [<0000000000536998>] start_kernel+0x39c/0x3dc [<0000000000013046>] _stext+0x46/0x1000 Fix incorrect usage of fsf_req_list_lock. It's used in tasklet context (irqs on) as well as in irq context. Therefore use the spin_lock_irqsave variant to avoid deadlocks. Acked-by:Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
================================= [ INFO: inconsistent lock state ] --------------------------------- inconsistent {hardirq-on-W} -> {in-hardirq-W} usage. swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes: (&adapter->erp_lock){+-..}, at: [<000000000026c7f8>] zfcp_erp_async_handler+0x3c/0x70 {hardirq-on-W} state was registered at: [<000000000005f33e>] __lock_acquire+0x30a/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a7ae>] _write_lock+0x4e/0x68 [<000000000026d822>] zfcp_erp_adapter_strategy_generic+0x286/0xd94 [<000000000026fd72>] zfcp_erp_strategy_do_action+0x91e/0x1a94 [<0000000000271a3a>] zfcp_erp_thread+0x21a/0x1568 [<0000000000019096>] kernel_thread_starter+0x6/0xc [<0000000000019090>] kernel_thread_starter+0x0/0xc irq event stamp: 12078 hardirqs last enabled at (12077): [<0000000000019416>] cpu_idle+0x206/0x250 hardirqs last disabled at (12078): [<0000000000020458>] io_no_vtime+0xc/0x1c softirqs last enabled at (12072): [<0000000000040b62>] __do_softirq+0x13a/0x180 softirqs last disabled at (12059): [<000000000001fd58>] do_softirq+0xec/0xf0 other info that might help us debug this: no locks held by swapper/0. stack backtrace: 00000000012bb648 0000000000000002 0000000000000000 00000000012bb758 00000000012bb6c0 0000000000399122 0000000000399122 0000000000016b0a 0000000000000000 0000000000000001 0000000000000000 00000000004660e8 0000000000000000 000000000000000d 00000000012bb6b8 00000000012bb730 0000000000368b90 0000000000016b0a 00000000012bb6b8 00000000012bb708 Call Trace: ([<0000000000016a26>] show_trace+0x76/0xdc) [<0000000000016b2c>] show_stack+0xa0/0xd0 [<0000000000016b8a>] dump_stack+0x2e/0x3c [<000000000005e3da>] print_usage_bug+0x27e/0x290 [<000000000005e934>] mark_lock+0x548/0x6c0 [<000000000005fb0c>] __lock_acquire+0xad8/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a662>] _write_lock_irqsave+0x62/0x80 [<000000000026c7f8>] zfcp_erp_async_handler+0x3c/0x70 [<0000000000279178>] zfcp_fsf_req_dispatch+0xd8/0x1fa8 [<000000000027e538>] zfcp_fsf_req_complete+0x104/0xe4c [<0000000000274534>] zfcp_qdio_reqid_check+0xf4/0x178 [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430 [<0000000000219dd4>] tiqdio_thinint_handler+0xd20/0x213c [<000000000020229a>] do_adapter_IO+0xb2/0xc0 [<0000000000206f32>] do_IRQ+0x136/0x16c [<0000000000020462>] io_no_vtime+0x16/0x1c [<0000000000019432>] cpu_idle+0x222/0x250 ([<0000000000019416>] cpu_idle+0x206/0x250) [<000000000001405a>] rest_init+0x5a/0x68 [<0000000000536998>] start_kernel+0x39c/0x3dc [<0000000000013046>] _stext+0x46/0x1000 Fix incorrect usage of erp_lock. Using the write_lock() variant is wrong, since this might lead to deadlocks. Acked-by: -
OGAWA Hirofumi authored
With recent change, if CONFIG_HOTPLUG_CPU is disabled, register_cpu_notifier() is not exported. And it breaked moduler msr/cpuid (msr.c was already fixed). We need to use register_hotcpu_notifier() now in module, instead of register_cpu_notifier(). Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Marcel Holtmann authored
This patch adds the support for RFCOMM role switching before the connection is fully established. Signed-off-by:Marcel Holtmann <marcel@holtmann.org>
-
Marcel Holtmann authored
This patch adds the module parameter disable_cfc which can be used to disable the credit based flow control. The credit based flow control was introduced with the Bluetooth 1.1 specification and devices can negotiate its support, but for testing purpose it is helpful to allow disabling of it. Signed-off-by: -
Marcel Holtmann authored
This patch is a small cleanup of the L2CAP source code. It makes some coding style changes and moves some functions around to avoid forward declarations. Signed-off-by: -
Marcel Holtmann authored
This patch converts the Bluetooth class devices into real devices. The Bluetooth class is kept and the driver core provides the appropriate symlinks for backward compatibility. Signed-off-by: -
Marcel Holtmann authored
This patch adds a generic Bluetooth platform device that can be used as parent device by virtual and serial devices. Signed-off-by: -
Marcel Holtmann authored
This patch introduces the automatic sniff mode feature. This allows the host to switch idle connections into sniff mode to safe power. Signed-off-by:
Ulisses Furquim <ulissesf@gmail.com> Signed-off-by:
-
Marcel Holtmann authored
This patch introduces a quirk that allows the drivers to tell the host to correct the SCO buffer size values. Signed-off-by:
Olivier Galibert <galibert@pobox.com> Signed-off-by:
-
Marcel Holtmann authored
This patch implements the suspend/resume methods for the HCI USB driver by killing all outstanding URBs on suspend, and re-issuing them on resume. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
