- 12 Mar, 2008 1 commit
-
-
David S. Miller authored
-
- 07 Mar, 2008 39 commits
-
-
Reinette Chatre authored
This is a change to a previous patch ("iwlwifi: 3945 split tx_complete to command and packet function") to ensure we do not have hardirq safe locks (priv->lock in this case) depend on hardirq unsafe locks. We only call iwl3945_tx_queue_reclaim while in a tasklet so we have to use the irqsafe version of the function. Signed-off-by:Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
John W. Linville authored
drivers/net/wireless/ath5k/debug.c: In function 'read_file_tsf': drivers/net/wireless/ath5k/debug.c:203: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/debug.c:203: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/debug.c: In function 'read_file_beacon': drivers/net/wireless/ath5k/debug.c:274: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/ath5k/debug.c:274: warning: format '%016llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/iwlwifi/iwl-4965.c: In function 'iwl4965_tx_status_reply_compressed_ba': drivers/net/wireless/iwlwifi/iwl-4965.c:3907: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' drivers/net/wireless/iwlwifi/iwl-4965.c: In function 'iwl4965_rx_reply_compressed_ba': drivers/net/wireless/iwlwifi/iwl-4965.c:4039: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type '__le64' drivers/net/wireless/iwlwifi/iwl-4965.c:4046: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64' drivers/net/wireless/iwlwifi/iwl4965-base.c: In function 'iwl4965_tx_status_reply_tx': drivers/net/wireless/iwlwifi/iwl4965-base.c:3661: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'u64' Signed-off-by: -
Bruno Randolf authored
atheros hardware has a problem with the rx timestamp of some IBSS beacons when they caused a TSF update (they have the same BSSID). the rx timestamp is wrong especially if the beacon frames get bigger than 78 byte (at least on AR5213 and AR5414 hardware). in that case ath5k_extend_tsf() will assume a rs_tstamp overflow and give us a timestamp too far in the past which will cause mac80211 to merge IBSS on every beacon (which is not necessary since the BSSID already matches). but in this case we know that the HW must have synced to the beacons TSF and the rx timestamp must be later than that so we can adjust mactime accordingly. also rename the function to ath5k_check_ibss_tsf() and change comments, since "hw merge" is better described as a TSF update. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by:
Bruno Randolf <bruno@thinktube.com> Signed-off-by:
-
Bruno Randolf authored
add comments about the fact that we don't know when exactly the atheros hardware takes the RX timestamp. drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by:
-
Bruno Randolf authored
move ath5k_tx_status and ath5k_rx_status structures out of the hardware descriptor since they are not accessed by the hardware at all. they just contain converted information from the hardware descriptor. since they are only used in the rx and tx tasklets there is also no use to keep them for each descriptor. drivers/net/wireless/ath5k/ath5k.h: Changes-licensed-under: ISC drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD drivers/net/wireless/ath5k/debug.c: Changes-licensed-under: GPL drivers/net/wireless/ath5k/debug.h: Changes-licensed-under: GPL drivers/net/wireless/ath5k/hw.c: Changes-licensed-under: ISC Signed-off-by:
-
Bruno Randolf authored
* make struct ath5k_desc clearer by directly including unions of structures, which correspond to the hardware descriptors of different HW versions (5210 and 5212). before they were casted at onto ath5k_desc at different points (e.g. ds_hw[2]). * rename some structures and variable names to make their use clearer, e.g. struct ath5k_hw_4w_tx_desc to ath5k_hw_4w_tx_ctl. * substitute "old" with "5210" and "new" with "5212" (eg. rename ath5k_hw_proc_new_rx_status() to ath5k_hw_proc_5212_rx_status()) because old and new are relative and we might have a newer structure at some point. * unify structs ath5k_hw_old_rx_status and ath5k_hw_new_rx_status into one ath5k_hw_rx_status, because they only differ in the flags and masks. drivers/net/wireless/ath5k/ath5k.h: Changes-licensed-under: ISC drivers/net/wireless/ath5k/debug.c: Changes-licensed-under: GPL drivers/net/wireless/ath5k/hw.c: Changes-licensed-under: ISC drivers/net/wireless/ath5k/hw.h: Changes-licensed-under: ISC Signed-off-by:
-
Ron Rindjunsky authored
This patch grabs NIC access inside iwl4965_tx_queue_agg_disable, instead of the caller doing it. The caller must still hold priv->lock when calling the function. Signed-off-by:
Max Stepanov <max.stepanov@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by:
-
Tomas Winkler authored
This patch 1. removes cmd completion from iwl3945_tx_queue_reclaim and creates iwl3945_cmd_queue_reclaim. 1. removes 11n relevant elements from this function 2. removes call to ieee80211_tx_status_irqsafe and uses ieee80211_tx_status only Signed-off-by:
-
Tomas Winkler authored
This patch fix 3945 rate scaling after cfg80211 rate/band changes Signed-off-by:
-
Tomas Winkler authored
This patch moves 1. iwl_queue_inc_wrap and int iwl_queue_dec_wrap into iwl-helpers.h these two functions are identical to common for both iwl3956 and iwl4965 2. renames x2_queue_used to iwl3945_x2_queue_used 3. exports iwl3945_queue_space out of iwl3964-base.c Signed-off-by:
-
Assaf Krauss authored
This patch move EEPROM code into iwl core module Signed-off-by:
Assaf Krauss <assaf.krauss@intel.com> Signed-off-by:
-
Tomas Winkler authored
This patch adds iwl-core module to iwlwifi driver. This module will contain common code and infrastracture for iwlwifi driver Signed-off-by:
-
Tomas Winkler authored
This patch fixes locking unbalance after adding rcu locking for sta Signed-off-by:
-
Ron Rindjunsky authored
This patch clarifies the use of IEEE80211_TXCTL_OFDM_HT flag. Can by united with patch "mac80211: adding mac80211_tx_control flags and HT flags" Signed-off-by:
-
Emmanuel Grumbach authored
This patch cancels an ongoing HW scan upon association. Not doing this resulted in instability in association. Signed-off-by:
-
Tomas Winkler authored
This patch adds fw_name to iwl_cfg. This allows run time selection of needed fw/ucode file Signed-off-by:
-
Tomas Winkler authored
This patch introduces struct iwl_cfg. struct iwl_cfg defines static configuration for each device type and sku. It is passed as driver_data to the bus probe function. This patch also introduce new common header file iwl-core.h which will represent core functionality of iwlwifi driver 3945ABG uses separate iwl-3945-dev.h header file for now Signed-off-by:
-
Tomas Winkler authored
HBUS is accessed through CSR registers moved to iwl-csr.h Signed-off-by:
-
Tomas Winkler authored
This patch extract CSR Register definition into separate header files as most of the definition are commons to both 3945 and 4965. Definitions specific for 3945 and 4965 are properly prefixed Signed-off-by:
-
Ron Rindjunsky authored
This patch makes use of the new mac80211_tx_control_flags and tx_rate to pass Tx data, regular and 11n, from the HW tx response into the rate scaling. Signed-off-by:
-
Ron Rindjunsky authored
This patch makes enum from the defines previously dwelled inside ieee80211_tx_control for better readability. The patch also addes HT flags, for 802.11n drivers: - IEEE80211_TXCTL_OFDM_HT: request low-level driver to use HT OFDM rates - IEEE80211_TXCTL_GREEN_FIELD: use green field protection - IEEE80211_TXCTL_DUP_DATA: duplicate data on both 20 Mhz channels - IEEE80211_TXCTL_40_MHZ_WIDTH: send this frame in 40Mhz width - IEEE80211_TXCTL_SHORT_GI: send this frame with short guard interval Tx command can be a combination of any of these flags, along with bitrate represented by ieee80211_rate. this will allow legacy drivers to switch easily to any 11n rate representation. Signed-off-by:
-
Guy Cohen authored
This patch adapts to 802.11 patch and remove AUTO offset for FAT channel Signed-off-by:
Guy Cohen <guy.cohen@intel.com> Signed-off-by:
-
Michael Buesch authored
This fixes a typo in the status report. Signed-off-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Michael Buesch authored
This adds a few debugging counters, that are useful for debugging the "card does not transmit" or "connection is unstable" kind of problems. It's also useful for tuning an RC algorithm. Signed-off-by:
-
Michael Buesch authored
Rename the DMA ring pointers to have more descriptive and standard names. Also remove the 6th unused TX ring. We can add it back later, if we need it. The unused TX-status rx-ring is also removed, as that's only used by legacy devices not supported by this driver anyway. This is no functional change, except less memory allocation for the removed rings. Signed-off-by:
-
Michael Buesch authored
This adds QOS support to the b43 driver. QOS can be disabled on driver level with a module parameter for debugging purposes. Signed-off-by:
-
Johannes Berg authored
Reinette pointed out that with the sta_info RCU-ification the behaviour here changed and the conf_tx callback is now invoked under RCU read lock. That is not necessary so this patch restores the original behaviour Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Tested-by:
-
Nick Kossifidis authored
Add 2413 to srev_names so that it shows up during module load. This is based on the new patch 7 which did not introduce a helper on ath5k_hw_reset(). Changes-licensed-under: 3-clause-BSD Signed-off-by:
Nick Kossifidis <mickflemm@gmail.com> Signed-off-by:
Luis R. Rodriguez <mcgrof@winlab.rutgers.edu> Signed-off-by:
-
Nick Kossifidis authored
Make some changes which mimic what we see in register dumps. This patch does not add a helper to ath5k_hw_reset(). It does seem clear we need a re-shuffle around ath5k_hw_reset() though as code in there is lengthy and already hitting 80-char limit. This can be dealt with later though. Changes-licensed-under: ISC Signed-off-by:
-
Nick Kossifidis authored
* Fix nic_wakeup for PCI-E chips (don't set AR5K_RESET_CTL_PCI bit) * Fix dma size setting for PCI-E chips (thanx to Bob Copeland). Changes-licensed-under: ISC Signed-off-by:
-
Nick Kossifidis authored
* Since RF2413 it seems that RF_BUFFER settings are different (notice that the last part -"bank 7" or whatever- is smaller than in 5111/5112). So until we know what's going on we assume there is no gain optimization stuff in post-5112 chips. Changes-licensed-under: ISC Signed-off-by:
-
Nick Kossifidis authored
* Add AR5K_RF2413 to radio check during hw_reset so it doesn't complain * Write ah_phy_spending value we set during attach instead of checking each time for radio revision * Skip txpower setup for RF2413 because it can't transmit with it (weird thing is that RF5413 has no problem with it). Changes-licensed-under: ISC Signed-off-by:
-
Nick Kossifidis authored
* Attach RF2413. * Propertly handle different AR5K_PHY_SPENDING settings for each RF chip by adding a field in ath5k_hw. This way we won't have to check inside hw_reset (see next patch). Changes-licensed-under: ISC Signed-off-by:
-
Nick Kossifidis authored
* Add initial settings for RF2413 Changes-licensed-under: ISC Signed-off-by:
-
Nick Kossifidis authored
* Add RF2413 srev values and a new entry on ath5k_radio enum for it since it differs from RF5413 (it's not like 5112-2112). Changes-licensed-under: ISC Signed-off-by:
-
Daniel Lezcano authored
This patch make use of the network namespace information at the right places to handle the multicast for several network namespaces. It makes the socket control to be per namespace too. Signed-off-by:
Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by:
Benjamin Thery <benjamin.thery@bull.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Lezcano authored
We have the right network namespace at the right place now. So make use of this information to make tcp6 per network namespace Signed-off-by:
-
Daniel Lezcano authored
Instead of having a tcp6_socket global to all the namespace, there is tcp6 socket control per namespace. That is consistent with which namespace sent a RST and allows to pass the socket to the underlying function to retrieve the network namespace. Signed-off-by:
-
Daniel Lezcano authored
Make ndisc socket control per namespace. Signed-off-by:
-
