- 20 Jan, 2016 4 commits
-
-
Matt Roper authored
This reverts commit 396e33ae. This commit was triggering some FIFO underrun warnings on ILK-IVB platforms (but surprisingly not on HSW/BDW that share more or less the same codepaths). These underruns were caught by the continuous integration (CI) system and could be reproduced consistently when running the basic acceptance tests (BAT) on the affected platforms. Note that this revert will cause a visible regression for some end-users; the "flicker when mouse moves between monitors in X" issue that was reported before this patch was merged will now return. However regressions that are visible to CI have higher priority since they prevent proper testing of future patches on those platforms. Hopefully we'll be able to figure out the cause of the underruns quickly and remerge an improved version of this patch to fix the regression. Cc: Daniel Vetter <daniel@ffwll.ch> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93640Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Daniel Vetter <daniel@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453232584-8543-1-git-send-email-matthew.d.roper@intel.comSigned-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Jani Nikula authored
Without the DOC:, kernel-doc confuses the documentation block for something else. Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453101588-18008-3-git-send-email-jani.nikula@intel.com
-
Jani Nikula authored
Apparently accidental or misplaced /** kernel-doc comments, confusing the tool. Turn them to normal comments. Reviewed-by:
-
Jani Nikula authored
The comments were never proper kernel-doc, but with SDVO it's not worth the trouble to make them kernel-doc. Just turn them into normal comments. Reviewed-by:
-
- 19 Jan, 2016 2 commits
-
-
Arun Siluvery authored
In GuC submission mode, driver has to provide a list of registers to be save/restored during gpu reset, make the max no. of registers value consistent with that of the value defined in FW. If they are not in sync then register save/restore during gpu reset won't work as expected. Cc: Alex Dai <yu.dai@intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1453132776-22229-1-git-send-email-arun.siluvery@linux.intel.comReviewed-by:
Alex Dai <yu.dai@intel.com> Signed-off-by:
-
Chris Wilson authored
This is an expected error given the lack of the firmware so emit it at KERN_NOTICE and not KERN_ERROR. Also include the firmware URL in the user facing message so that the user can investigate and fix the issue on their own, and also explain the consequence in plain language. The complete failure message, including the first line from the firmware loader, becomes i915 0000:00:02.0: Direct firmware load for i915/skl_dmc_ver1.bin failed with error -2 i915 0000:00:02.0: Failed to load DMC firmware [https://01.org/linuxgraphics/intel-linux-graphics-firmwares], disabling runtime power management. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Sunil Kamath <sunil.kamath@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452706695-13518-1-git-send-email-chris@chris-wilson.co.ukReviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
- 18 Jan, 2016 9 commits
-
-
Geliang Tang authored
Use hlist_for_each_entry() instead of hlist_for_each() to simplify the code. Signed-off-by:
Geliang Tang <geliangtang@163.com> Link: http://patchwork.freedesktop.org/patch/msgid/b80568b2990ebcc145229a132f045e852ac51ad6.1453126187.git.geliangtang@163.comSigned-off-by:
-
Ville Syrjälä authored
Pass BIT(DRM_ROTATE_0) instead of DRM_ROTATE_0 to skl_update_scaler(). The former is a mask, the latter just the bit number. Fortunately the only thing skl_update_scaler() does with the rotation is check if it's 90/270 degrees or not, and so in this case it would still do the right thing. Cc: Chandra Konduru <chandra.konduru@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1444917718-28495-1-git-send-email-ville.syrjala@linux.intel.com Fixes: 6156a456 ("drm/i915: skylake primary plane scaling using shared scalers") Reviewed-by:
-
Ville Syrjälä authored
On SKL+ plane scaling is mutually exclusive with color keying. The code check for this, but during some refactoring the code got changed to also reject primary plane windowing when color keying is used. There is no such restriction in the hardware, so restore the original logic. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: 061e4b8d ("drm/i915: clean up atomic plane check functions, v2.") Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Alex Dai authored
During driver unloading, the guc_client created for command submission needs to be released to avoid memory leak. The struct_mutex needs to be held before tearing down GuC. v1: Move i915_guc_submission_disable out of i915_guc_submission_fini and take struct_mutex lock before release GuC client. (Dave Gordon) v2: Add the locking for failure case in guc_fw_fetch. (Dave Gordon) Add i915_guc_submission_fini for failure case in intel_guc_ucode_load. Signed-off-by:Dave Gordon <david.s.gordon@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452711710-4505-1-git-send-email-yu.dai@intel.com
-
Tvrtko Ursulin authored
LRC lifetime is well defined so we can cache the page pointing to the object backing store in the context in order to avoid walking over the object SG page list from the interrupt context without the big lock held. v2: Also cache the mapping. (Chris Wilson) v3: Unmap on the error path. v4: No need to cache the page. (Chris Wilson) v5: No need to dirty the page on unpin. (Chris Wilson) v6: kmap() cannot fail and use kmap_to_page to simplify unpin. (Chris Wilson) Signed-off-by:Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
Purpose is to avoid calling i915_gem_obj_ggtt_offset from the interrupt context without the big lock held. v2: Renamed gtt_start to gtt_offset. (Daniel Vetter) v3: Cache the VMA instead of address. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
LRC code was calling GEM API like i915_gem_obj_ggtt_offset from places where the struct_mutex cannot be grabbed (irq handlers). To avoid that this patch caches some interesting bits and values in the engine and context structures. Some usages are also removed where they are not needed like a few asserts which are either impossible or have been checked already during engine initialization. Side benefit is also that interrupt handlers and command submission stop evaluating invariant conditionals, like what Gen we are running on, on every interrupt and every command submitted. This patch deals with logical ring context id and descriptors while subsequent patches will deal with the remaining issues. v2: * Cache the VMA instead of the address. (Chris Wilson) * Incorporate Dave Gordon's good comments and function name. v3: * Extract ctx descriptor template to a function and group functions dealing with ctx descriptor & co together near top of the file. (Dave Gordon) Signed-off-by:
-
Tvrtko Ursulin authored
No need to call ktime_get_raw_ns twice per unlimited wait and can also elimate a local variable. v2: Added comment about silencing the compiler warning. (Daniel Vetter) Signed-off-by:
-
Daniel Vetter authored
Pull in Dave's drm-next pull request to have a clean base for 4.6. Also, we need the various atomic state extensions Maarten recently created. Conflicts are just adjacent changes that all resolve to nothing in git diff. Signed-off-by:Daniel Vetter <daniel.vetter@intel.com>
-
- 17 Jan, 2016 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel into drm-next misc i915 fixes all over the place. * tag 'drm-intel-next-fixes-2016-01-14' of git://anongit.freedesktop.org/drm-intel: drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page drm/i915: Widen return value for reservation_object_wait_timeout_rcu to long. drm/i915: intel_hpd_init(): Fix suspend/resume reprobing drm/i915: shut up gen8+ SDE irq dmesg noise, again drm/i915: Restore inhibiting the load of the default context drm/i915: Tune down rpm wakelock debug checks drm/i915: Avoid writing relocs with addresses in non-canonical form drm/i915: Move Braswell stop_machine GGTT insertion workaround
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Since your main drm-next pull isn't out of the door yet I figured I might as well flush out drm-misc instead of delaying for 4.6. It's really just random stuff all over, biggest thing probably connector_mask tracking from Maarten. * tag 'topic/drm-misc-2016-01-17' of git://anongit.freedesktop.org/drm-intel: (24 commits) drm/fb_cma_helper: Remove implicit call to disable_unused_functions drm/sysfs: use kobj_to_dev() drm/i915: Init power domains early in driver load drm: Do not set connector->encoder in drivers apple-gmux: Add initial documentation drm: move MODULE_PARM_DESC to other file drm/edid: index CEA/HDMI mode tables using the VIC drm/atomic: Remove drm_atomic_connectors_for_crtc. drm/i915: Update connector_mask during readout, v2. drm: Remove opencoded drm_gem_object_release_handle() drm: Do not set outparam on error during GEM handle allocation drm/docs: more leftovers from the big vtable documentation pile drm/atomic-helper: Reject legacy flips on a disabled pipe drm/atomic: add connector mask to drm_crtc_state. drm/tegra: Use __drm_atomic_helper_reset_connector for subclassing connector state, v2. drm/atomic: Add __drm_atomic_helper_connector_reset, v2. drm/i915: Set connector_state->connector using the helper. drm: Use a normal idr allocation for the obj->name drm: Only bump object-reference count when adding first handle drm: Balance error path for GEM handle allocation ...
-
- 15 Jan, 2016 9 commits
-
-
Ville Syrjälä authored
rotate_pages() doesn't modify the passed in dma addresses, so make them const. Signed-off-by:
-
Ville Syrjälä authored
Just for clarity set the type for i915_ggtt_view_normal explicitly. While at it fix the indentation fail for i915_ggtt_view_rotated. Signed-off-by:
-
Ville Syrjälä authored
Don't increment obj->framebuffer_references until we know we actually managed to create the framebuffer. Signed-off-by:
-
Maxime Ripard authored
The drm_fbdev_cma_init function always calls the drm_helper_disable_unused_functions. Since it's part of the usual probe process, all the drivers using that helper will end up having their encoder and CRTC disable functions called at probe if their device has not been reported as enabled. This could be fixed by reading out from the registers the current state of the device if it is enabled, but even that will not handle the case where the device is actually disabled. Moreover, the drivers using the atomic modesetting expect that their enable and disable callback to be called when the device is already enabled or disabled (respectively). We can however fix this issue by moving the call to drm_helper_disable_unused_functions out of drm_fbdev_cma_init and make the drivers needing it (all the drivers calling drm_fbdev_cma_init and not using the atomic modesetting) explicitly call it. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452785109-6172-14-git-send-email-maxime.ripard@free-electrons.comAcked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Jani Nikula authored
Per DP spec, the source device should fall back to 18 bpp, VESA range RGB when the sink capability is unknown. Fix the color depth clamping. 18 bpp color depth should ensure full color range in automatic mode. The clamping has been HDMI specific since its introduction in commit 996a2239 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Apr 19 11:24:34 2013 +0200 drm/i915: Disable high-bpc on pre-1.4 EDID screens Cc: stable@vger.kernel.org Reported-and-tested-by:
Dihan Wickremasuriya <nayomal@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331Reviewed-by:
-
Jani Nikula authored
Two errors in a single line. The size was read from the wrong offset, and the end index didn't take the five bytes for sequence byte and size of sequence into account. Fix it all, and break up the calculations a bit to make it clearer. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reported-and-tested-by:
Mika Kahola <mika.kahola@intel.com> Reviewed-by:
-
Francisco Jerez authored
We need to set the DC FLUSH PIPE_CONTROL bit on Gen7+ to guarantee that writes performed via the HDC are visible in memory. Fixes an intermittent failure in a Piglit test that writes to a BO from a shader using GL atomic counters (implemented as HDC untyped atomics) and then expects the memory to read back the same value after mapping it on the CPU. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91298Tested-by:
Mark Janes <mark.a.janes@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Francisco Jerez <currojerez@riseup.net> Reviewed-by:
-
Ville Syrjälä authored
ilk_program_watermarks() is supposed to merge the active watermarks from all pipes. Thus we need to use the active config too instead of some precomputed stuff. Fixes: aa363136 ("drm/i915: Calculate watermark configuration during atomic check (v2)") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Ville Syrjälä authored
ilk_compute_pipe_wm() assumes as zeroed pipe_wm structure when it starts. We used to pass such a zeroed struct in, but this got broken when the pipe_wm structure got embedded in the crtc state. To fix it without too much fuzz, we need to resort to a memset(). Fixes: 4e0963c7 ("drm/i915: Calculate pipe watermarks into CRTC state (v3)") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
- 14 Jan, 2016 1 commit
-
-
Jani Nikula authored
Add a common function to return "on" or "off" string based on the argument, and drop the local versions of it. This is the onoff version of commit 42a8ca4c Author: Jani Nikula <jani.nikula@intel.com> Date: Thu Aug 27 16:23:30 2015 +0300 drm/i915: add yesno utility function Reviewed-by:
-
- 13 Jan, 2016 13 commits
-
-
Dave Airlie authored
this fixes the build on arm. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next This 2nd pull request includes the following, - add configurable plane support and relevant cleanups. - fixup kernel panic issue at drm releasing. - remove unnecessary codes. This has been delayed to resolve a critical issue - which incurrs a kernel panic when driver is released - and review it. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: fix kernel panic issue at drm releasing drm/exynos: crtc: do not wait for the scanout completion drm/exynos: mixer: properly update all planes on the same vblank event drm/exynos: crtc: rework atomic_{begin,flush} drm/exynos: mixer: unify a check for video-processor window drm/exynos: mixer: also allow ARGB1555 and ARGB4444 drm/exynos: mixer: refactor layer setup drm/exynos: mixer: remove all static blending setup drm/exynos: mixer: set window priority based on zpos drm/exynos: make zpos property configurable drm/exynos: rename zpos to index
-
git://git.pengutronix.de/git/lst/linuxDave Airlie authored
etnaviv fixes. * 'drm-etnaviv-fixes' of git://git.pengutronix.de/git/lst/linux: drm/etnaviv: fix workaround for GC500 drm/etnaviv: unlock on error in etnaviv_gem_get_iova()
-
Dave Airlie authored
Merge branch 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip into drm-next new rockchip bits. * 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip: drm: rockchip: Support Synopsys DW MIPI DSI Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver drm/rockchip: return a true clock rate to adjusted_mode
-
Thomas Hellstrom authored
When the framebuffer is a vmwgfx dma buffer and a proxy surface is created, the vmw_kms_update_proxy() function requires that the proxy surface width and the framebuffer pitch are compatible, otherwise display corruption occurs as seen in gnome-shell/native with software 3D. Since the framebuffer pitch is determined by user-space, allocate a proxy surface the width of which is based on the framebuffer pitch rather than on the framebuffer width. Cc: <stable@vger.kernel.org> Reported-by:
Raphael Hertzog <buxy@kali.org> Tested-by:
Mati Aharoni <muts@kali.org> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
With CONFIG_SMP=n and CONFIG_DEBUG_SPINLOCK=y the vmwgfx kernel module would unconditionally throw a bug when checking for a held spinlock in the command buffer code. Fix this by using a lockdep check. Cc: <stable@vger.kernel.org> Reported-and-tested-by:
Tetsuo Handa <penguin-kernel@i-love-sakura.ne.jp> Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Arnd Bergmann authored
The new debugfs initialization code fails to build when CONFIG_DEBUG_FS is disabled: In file included from /git/arm-soc/drivers/gpu/drm/nouveau/nouveau_drm.c:57:0: drivers/gpu/drm/nouveau/nouveau_debugfs.h: In function 'nouveau_debugfs_init': drivers/gpu/drm/nouveau/nouveau_debugfs.h:37:29: error: parameter name omitted nouveau_debugfs_init(struct nouveau_drm *) This fixes the prototypes so we can build it again. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: b126a200 ("drm/nouveau/debugfs: we need a ctrl object for debugfs") Signed-off-by:
-
Karol Herbst authored
v2: remove unneeded pci check Signed-off-by:
Karol Herbst <nouveau@karolherbst.de> Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
A few more misc things for radeon and amdgpu for 4.5: - TTM fixes for imported buffers - amdgpu fixes to avoid -ENOMEM in CS ioctl - CZ UVD and VCE clock force options for debugging video issues - A couple of ACP prerequisites - Misc fixes * 'drm-next-4.5' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: validate duplicates first drm/amdgpu: move VM page tables to the LRU end on CS v2 drm/ttm: add ttm_bo_move_to_lru_tail function v2 drm/ttm: fix adding foreign BOs to the swap LRU drm/ttm: fix adding foreign BOs to the LRU during init v2 drm/radeon: use kobj_to_dev() drm/amdgpu: use kobj_to_dev() drm/amdgpu/cz: force vce clocks when sclks are forced drm/amdgpu/cz: force uvd clocks when sclks are forced drm/amdgpu/cz: add code to enable forcing VCE clocks drm/amdgpu/cz: add code to enable forcing UVD clocks drm/amdgpu: fix lost sync_to if scheduler is enabled. drm/amd/powerplay: fix static checker warning for return meaningless value. drm/amdgpu: add irq domain support drm/amdgpu/cgs: add an interface to access PCI resources
-
Christian König authored
Most VM BOs end up in the duplicates list, validate it first make -ENOMEM less likely. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Chunming Zhou <David1.Zhou@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Christian König authored
This makes it less likely to run into an ENOMEM because VM page tables are evicted last. v2: move the BOs in the LRU tail after validation Signed-off-by:
-
Christian König authored
This allows the drivers to move a BO to the end of the LRU without removing and adding it again. v2: Make it more robust, handle pinned and swapable BOs as well. Reviewed-by:
-
Christian König authored
It doesn't make any sense to try to swap out imported BOs. Reviewed-by:
-
