- 25 Mar, 2011 3 commits
-
-
Josef Bacik authored
I noticed that dio_end_io calls the appropriate endio function with an error, but the endio functions don't actually do anything with that error, they assume that if there was an error then the bio will not be uptodate. So if we had checksum failures we would never pass back EIO. So if there is an error in our endio functions make sure to clear the uptodate flag on the bio. Thanks, Signed-off-by:Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
When doing direct writes we store the checksums in the ordered sum stuff in the ordered extent for writing them when the write completes, so we don't even use the dip->csums array. So if we're writing, don't bother allocating dip->csums since we won't use it anyway. Thanks, Signed-off-by: -
Josef Bacik authored
This patch makes the free space cluster refilling code a little easier to understand, and fixes some things with the bitmap part of it. Currently we either want to refill a cluster with 1) All normal extent entries (those without bitmaps) 2) A bitmap entry with enough space The current code has this ugly jump around logic that will first try and fill up the cluster with extent entries and then if it can't do that it will try and find a bitmap to use. So instead split this out into two functions, one that tries to find only normal entries, and one that tries to find bitmaps. This also fixes a suboptimal thing we would do with bitmaps. If we used a bitmap we would just tell the cluster that we were pointing at a bitmap and it would do the tree search in the block group for that entry every time we tried to make an allocation. Instead of doing that now we just add it to the clusters group. I tested this with my ENOSPC tests and xfstests and it survived. Signed-off-by:
-
- 21 Mar, 2011 3 commits
-
-
Josef Bacik authored
We have been creating bitmaps for small extents unconditionally forever. This was great when testing to make sure the bitmap stuff was working, but is overkill normally. So instead of always adding small chunks of free space to bitmaps, only start doing it if we go past half of our extent threshold. This will keeps us from creating a bitmap for just one small free extent at the front of the block group, and will make the allocator a little faster as a result. Thanks, Signed-off-by: -
Josef Bacik authored
We do all this fun stuff with min_bytes, but either don't use it in the case of just normal extents, or use it completely wrong in the case of bitmaps. So fix this for both cases 1) In the extent case, stop looking for space with window_free >= min_bytes instead of bytes + empty_size. 2) In the bitmap case, we were looking for streches of free space that was at least min_bytes in size, which was not right at all. So instead search for stretches of free space that are at least bytes in size (this will make a difference when we have > page size blocks) and then only search for min_bytes amount of free space. Thanks, Reviewed-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
-
Josef Bacik authored
The free space cluster stuff is heavy duty, so there is no sense in going through the entire song and dance if there isn't enough space in the block group to begin with. Thanks, Signed-off-by:
-
- 17 Mar, 2011 16 commits
-
-
Josef Bacik authored
We need to make sure the dir items we get are valid dir items. So any time we try and read one check it with verify_dir_item, which will do various sanity checks to make sure it looks sane. Thanks, Signed-off-by: -
Josef Bacik authored
Doing an audit of where we use btrfs_search_slot only showed one place where we don't check the return value of btrfs_search_slot properly. Just fix mark_extent_written to see if btrfs_search_slot failed and act accordingly. Thanks, Signed-off-by: -
Josef Bacik authored
Currently if we have corrupted items things will blow up in spectacular ways. So as we read in blocks and they are leaves, check the entire leaf to make sure all of the items are correct and point to valid parts in the leaf for the item data the are responsible for. If the item is corrupt we will kick back EIO and not read any of the copies since they are likely to not be correct either. This will catch generic corruptions, it will be up to the individual callers of btrfs_search_slot to make sure their items are right. Thanks, Signed-off-by: -
Josef Bacik authored
Currently if we have corrupt metadata map_extent_buffer will complain about it, but not return an error so the caller has no idea a problem was hit. Fix this. Thanks, Signed-off-by: -
Josef Bacik authored
Everytime I have to deal with btrfs_cont_expand I stare at it for 20 minutes trying to remember what exactly it does and why the hell we need it. So add a comment to save future-Josef some time. Thanks, Signed-off-by: -
Josef Bacik authored
Mark_inode_dirty will call btrfs_dirty_inode which will take care of updating the inode. This makes setsize a little cleaner since we don't have to start a transaction and update the inode in there, we can just call mark_inode_dirty. Thanks, Signed-off-by: -
Josef Bacik authored
We don't need an orphan item when expanding files, we just need them for truncating them, so only add the orphan item in btrfs_truncate instead of in btrfs_setsize. Thanks, Signed-off-by: -
Josef Bacik authored
This fixes a problem where if truncate fails the inode will still be on the in memory orphan list. This is will make us complain when the inode gets destroyed because it's still on the orphan list. So if we fail just remove us from the in memory list and carry on. Signed-off-by: -
Josef Bacik authored
If we cannot truncate an inode for some reason we will never delete the orphan item associated with that inode, which means that we will loop forever in btrfs_orphan_cleanup. Instead of doing this just return error so we fail to mount. It sucks, but hey it's better than hanging. Thanks, Signed-off-by: -
Josef Bacik authored
Now that we can handle having errors in the truncate path lets make sure we return errors instead of doing BUG_ON() and such. Thanks, Signed-off-by: -
Josef Bacik authored
->truncate() is going away, instead all of the work needs to be done in ->setattr(). So this converts us over to do this. It's fairly straightforward, just get rid of our .truncate inode operation and call btrfs_truncate() directly from btrfs_setsize. This works out better for us since truncate can technically return ENOSPC, and before we had no way of letting anybody know. Thanks, Signed-off-by: -
Josef Bacik authored
Since we alloc/free free space entries a whole lot, lets use a slab to keep track of them. This makes some of my tests slightly faster. Thanks, Signed-off-by: -
Josef Bacik authored
We track delayed allocation per inodes via 2 counters, one is outstanding_extents and reserved_extents. Outstanding_extents is already an atomic_t, but reserved_extents is not and is protected by a spinlock. So convert this to an atomic_t and instead of using a spinlock, use atomic_cmpxchg when releasing delalloc bytes. This makes our inode 72 bytes smaller, and reduces locking overhead (albiet it was minimal to begin with). Thanks, Signed-off-by: -
Josef Bacik authored
Really we don't need to memset the pages array at all, since we know how many pages we're going to use in the array and pass that around. So don't memset, just trust we're not idiots and we pass num_pages around properly. Signed-off-by: -
Josef Bacik authored
Our aio_write function is huge and kind of hard to follow at times. So this patch fixes this by breaking out the buffered and direct write paths out into seperate functions so it's a little clearer what's going on. I've also fixed some wrong typing that we had and added the ability to handle getting an error back from btrfs_set_extent_delalloc. Tested this with xfstests and everything came out fine. Thanks, Signed-off-by: -
Josef Bacik authored
Sorry, but these were bugging me. Just cleanup some of the formatting in file.c. Signed-off-by:
-
- 15 Mar, 2011 1 commit
-
-
Linus Torvalds authored
-
- 14 Mar, 2011 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300Linus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: MN10300: atomic_read() should ensure it emits a load MN10300: The SMP_ICACHE_INV_FLUSH_RANGE IPI command does not exist MN10300: Proper use of macros get_user() in the case of incremented pointers
-
git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (26 commits) MIPS: Alchemy: Fix reset for MTX-1 and XXS1500 MIPS: MTX-1: Make au1000_eth probe all PHY addresses MIPS: Jz4740: Add HAVE_CLK MIPS: Move idle task creation to work queue MIPS, Perf-events: Use unsigned delta for right shift in event update MIPS, Perf-events: Work with the new callchain interface MIPS, Perf-events: Fix event check in validate_event() MIPS, Perf-events: Work with the new PMU interface MIPS, Perf-events: Work with irq_work MIPS: Fix always CONFIG_LOONGSON_UART_BASE=y MIPS: Loongson: Fix potentially wrong string handling MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h MIPS: Remove unused code from arch/mips/kernel/syscall.c MIPS: Fix GCC-4.6 'set but not used' warning in signal*.c MIPS: MSP: Fix MSP71xx bpci interrupt handler return value MIPS: Select R4K timer lib for all MSP platforms MIPS: Loongson: Remove ad-hoc cmdline default MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...). MIPS: Add an unreachable return statement to satisfy buggy GCCs. ...
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: ce4100: Set pci ops via callback instead of module init x86/mm: Fix pgd_lock deadlock x86/mm: Handle mm_fault_error() in kernel space x86: Don't check for BIOS corruption in first 64K when there's no need to
-
Linus Torvalds authored
This reverts the parent commit. I hate doing that, but it's generating some discussion ("half of it is right"), and since I am planning on doing the 2.6.38 release later today we can punt it to stable if required. Let's not rock the boat right now. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
oom_kill_process() starts with victim_points == 0. This means that (most likely) any child has more points and can be killed erroneously. Also, "children has a different mm" doesn't match the reality, we should check child->mm != t->mm. This check is not exactly correct if t->mm == NULL but this doesn't really matter, oom_kill_task() will kill them anyway. Note: "Kill all processes sharing p->mm" in oom_kill_task() is wrong too. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Florian Fainelli authored
Since commit 32fd6901 (MIPS: Alchemy: get rid of common/reset.c) Alchemy-based boards use their own reset function. For MTX-1 and XXS1500, the reset function pokes at the BCSR.SYSTEM_RESET register, but this does not work. According to Bruno Randolf, this was not tested when written. Previously, the generic au1000_restart() routine called the board specific reset function, which for MTX-1 and XXS1500 did not work, but finally made a jump to the reset vector, which really triggers a system restart. Fix reboot for both targets by jumping to the reset vector. Signed-off-by:
Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2093/Acked-by:
Bruno Randolf <br1@einfach.org> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Florian Fainelli authored
When au1000_eth probes the MII bus for PHY address, if we do not set au1000_eth platform data's phy_search_highest_address, the MII probing logic will exit early and will assume a valid PHY is found at address 0. For MTX-1, the PHY is at address 31, and without this patch, the link detection/speed/duplex would not work correctly. CC: stable@kernel.org Signed-off-by:
-
Maurus Cuelenaere authored
Jz4740 supports the clock framework but doesn't have HAVE_CLK defined, so define it! Signed-off-by:
Maurus Cuelenaere <mcuelenaere@gmail.com> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2112/Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Maksim Rayskiy authored
To avoid forking usermode thread when creating an idle task, move fork_idle to a work queue. If kernel starts with maxcpus= option which does not bring all available cpus online at boot time, idle tasks for offline cpus are not created. If later offline cpus are hotplugged through sysfs, __cpu_up is called in the context of the user task, and fork_idle copies its non-zero mm pointer. This causes BUG() in per_cpu_trap_init. This also avoids issues with resource limits of the CPU writing to sysfs, containers, maybe others. Signed-off-by:
Maksim Rayskiy <mrayskiy@broadcom.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2070/Signed-off-by:
-
Deng-Cheng Zhu authored
Leverage the commit for ARM by Will Deacon: - 446a5a8b ARM: 6205/1: perf: ensure counter delta is treated as unsigned Hardware performance counters on ARM are 32-bits wide but atomic64_t variables are used to represent counter data in the hw_perf_event structure. The armpmu_event_update function right-shifts a signed 64-bit delta variable and adds the result to the event count. This can lead to shifting in sign-bits if the MSB of the 32-bit counter value is set. This results in perf output such as: Performance counter stats for 'sleep 20': 18446744073460670464 cycles <-- 0xFFFFFFFFF12A6000 7783773 instructions # 0.000 IPC 465 context-switches 161 page-faults 1172393 branches 20.154242147 seconds time elapsed This patch ensures that the delta value is treated as unsigned so that the right shift sets the upper bits to zero. Acked-by:
Will Deacon <will.deacon@arm.com> Acked-by:
David Daney <ddaney@caviumnetworks.com> Signed-off-by:
Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: a.p.zijlstra@chello.nl To: fweisbec@gmail.com To: will.deacon@arm.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: wuzhangjin@gmail.com Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: matt@console-pimps.org Cc: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/2015/Signed-off-by:
-
Deng-Cheng Zhu authored
This is the MIPS part of the following commits by Frederic Weisbecker: - f72c1a93 perf: Factorize callchain context handling Store the kernel and user contexts from the generic layer instead of archs, this gathers some repetitive code. - 56962b44 perf: Generalize some arch callchain code - Most archs use one callchain buffer per cpu, except x86 that needs to deal with NMIs. Provide a default perf_callchain_buffer() implementation that x86 overrides. - Centralize all the kernel/user regs handling and invoke new arch handlers from there: perf_callchain_user() / perf_callchain_kernel() That avoid all the user_mode(), current->mm checks and so... - Invert some parameters in perf_callchain_*() helpers: entry to the left, regs to the right, following the traditional (dst, src). - 70791ce9 perf: Generalize callchain_store() callchain_store() is the same on every archs, inline it in perf_event.h and rename it to perf_callchain_store() to avoid any collision. This removes repetitive code. - c1a65932 perf: Drop unappropriate tests on arch callchains Drop the TASK_RUNNING test on user tasks for callchains as this check doesn't seem to make any sense. Also remove the tests for !current that is not supposed to happen and current->pid as this should be handled at the generic level, with exclude_idle attribute. Reported-by:
Wu Zhangjin <wuzhangjin@gmail.com> Acked-by:
Frederic Weisbecker <fweisbec@gmail.com> Acked-by:
-
Deng-Cheng Zhu authored
Ignore events that are in off/error state or belong to a different PMU. This patch originates from the following commit for ARM by Will Deacon: - 65b4711f ARM: 6352/1: perf: fix event validation The validate_event function in the ARM perf events backend has the following problems: 1.) Events that are disabled count towards the cost. 2.) Events associated with other PMUs [for example, software events or breakpoints] do not count towards the cost, but do fail validation, causing the group to fail. This patch changes validate_event so that it ignores events in the PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs. Acked-by:
-
Deng-Cheng Zhu authored
This is the MIPS part of the following commits by Peter Zijlstra: - a4eaf7f1 perf: Rework the PMU methods Replace pmu::{enable,disable,start,stop,unthrottle} with pmu::{add,del,start,stop}, all of which take a flags argument. The new interface extends the capability to stop a counter while keeping it scheduled on the PMU. We replace the throttled state with the generic stopped state. This also allows us to efficiently stop/start counters over certain code paths (like IRQ handlers). It also allows scheduling a counter without it starting, allowing for a generic frozen state (useful for rotating stopped counters). The stopped state is implemented in two different ways, depending on how the architecture implemented the throttled state: 1) We disable the counter: a) the pmu has per-counter enable bits, we flip that b) we program a NOP event, preserving the counter state 2) We store the counter state and ignore all read/overflow events For MIPSXX, the stopped state is implemented in the way of 1.b as above. - 33696fc0 perf: Per PMU disable Changes perf_disable() into perf_pmu_disable(). - 24cd7f54 perf: Reduce perf_disable() usage Since the current perf_disable() usage is only an optimization, remove it for now. This eases the removal of the __weak hw_perf_enable() interface. - b0a873eb perf: Register PMU implementations Simple registration interface for struct pmu, this provides the infrastructure for removing all the weak functions. - 51b0fe39 perf: Deconstify struct pmu sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"` Reported-by:
-
Deng-Cheng Zhu authored
This is the MIPS part of the following commit by Peter Zijlstra: - e360adbe irq_work: Add generic hardirq context callbacks Provide a mechanism that allows running code in IRQ context. It is most useful for NMI code that needs to interact with the rest of the system -- like wakeup a task to drain buffers. Perf currently has such a mechanism, so extract that and provide it as a generic feature, independent of perf so that others may also benefit. The IRQ context callback is generated through self-IPIs where possible, or on architectures like powerpc the decrementer (the built-in timer facility) is set to generate an interrupt immediately. Architectures that don't have anything like this get to do with a callback from the timer tick. These architectures can call irq_work_run() at the tail of any IRQ handlers that might enqueue such work (like the perf IRQ handler) to avoid undue latencies in processing the work. For MIPSXX, we need to call irq_work_run() at the tail of the perf IRQ handler as described above. Reported-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
-
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2055/Signed-off-by:
-
Stefan Weil authored
This error was reported by cppcheck: arch/mips/loongson/common/machtype.c:56: error: Dangerous usage of 'str' (strncpy doesn't always 0-terminate it) If strncpy copied MACHTYPE_LEN bytes, the destination string str was not terminated. The patch adds one more byte to str and makes sure that this byte is always 0. Signed-off-by:
Stefan Weil <weil@mail.berlios.de> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Arnaud Patard <apatard@mandriva.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2053/Signed-off-by:
-
David Daney authored
Under some combinations of CONFIG_*, lastpfn in page_is_ram is 'set but not used'. Mark it as __maybe_unused to quiet the warning/error. Signed-off-by:
-
