- 14 Oct, 2018 4 commits
-
-
Christophe Leroy authored
In order to avoid multiple conversions, handover directly a pgprot_t to map_kernel_page() as already done for radix. Do the same for __ioremap_caller() and __ioremap_at(). Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Christophe Leroy authored
Set PAGE_KERNEL directly in the caller and do not rely on a hack adding PAGE_KERNEL flags when _PAGE_PRESENT is not set. As already done for PPC64, use pgprot_cache() helpers instead of _PAGE_XXX flags in PPC32 ioremap() derived functions. Signed-off-by:
-
Christophe Leroy authored
In many places, ioremap_prot() and __ioremap() can be replaced with higher level functions like ioremap(), ioremap_coherent(), ioremap_cache(), ioremap_wc() ... Signed-off-by:
-
Christophe Leroy authored
ioremap_prot() with flag set to 0 relies on a hack in __ioremap_caller() which adds PAGE_KERNEL flags when the handed flags don't look like a valid set of flags (ie don't include _PAGE_PRESENT) The intention being to map cached memory, use ioremap_cache() instead. Signed-off-by:
-
- 13 Oct, 2018 36 commits
-
-
Christophe Leroy authored
_PAGE_WRITETHRU is a target specific flag. Prefer generic functions. Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Christophe Leroy authored
_PAGE_NO_CACHE is a platform specific flag. In addition, this flag is misleading because one would think it requests a noncached page whereas a noncached page is _PAGE_NO_CACHE | _PAGE_GUARDED _PAGE_NO_CACHE alone means write combined noncached page, so lets use ioremap_wc() instead. _PAGE_WRITETHRU is also platform specific flag. Use ioremap_wt() instead. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Christophe Leroy authored
Other arches have ioremap_wt() to map IO areas write-through. Implement it on PPC as well in order to avoid drivers using __ioremap(_PAGE_WRITETHRU) Also implement ioremap_coherent() to avoid drivers using __ioremap(_PAGE_COHERENT) Signed-off-by:
-
Gautham R. Shenoy authored
Live Partition Migrations require all the present CPUs to execute the H_JOIN call, and hence rtas_ibm_suspend_me() onlines any offline CPUs before initiating the migration for this purpose. The commit 85a88cab ("powerpc/pseries: Disable CPU hotplug across migrations") disables any CPU-hotplug operations once all the offline CPUs are brought online to prevent any further state change. Once the CPU-Hotplug operation is disabled, the code assumes that all the CPUs are online. However, there is a minor window in rtas_ibm_suspend_me() between onlining the offline CPUs and disabling CPU-Hotplug when a concurrent CPU-offline operations initiated by the userspace can succeed thereby nullifying the the aformentioned assumption. In this unlikely case these offlined CPUs will not call H_JOIN, resulting in a system hang. Fix this by verifying that all the present CPUs are actually online after CPU-Hotplug has been disabled, failing which we restore the state of the offline CPUs in rtas_ibm_suspend_me() and return an -EBUSY. Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Suggested-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
Gautham R. Shenoy authored
Currently on POWER9 SMT8 cores systems, in sysfs, we report the shared_cache_map for L1 caches (both data and instruction) to be the cpu-ids of the threads in SMT8 cores. This is incorrect since on POWER9 SMT8 cores there are two groups of threads, each of which shares its own L1 cache. This patch addresses this by reporting the shared_cpu_map correctly in sysfs for L1 caches. Before the patch /sys/devices/system/cpu/cpu0/cache/index0/shared_cpu_map : 000000ff /sys/devices/system/cpu/cpu0/cache/index1/shared_cpu_map : 000000ff /sys/devices/system/cpu/cpu1/cache/index0/shared_cpu_map : 000000ff /sys/devices/system/cpu/cpu1/cache/index1/shared_cpu_map : 000000ff After the patch /sys/devices/system/cpu/cpu0/cache/index0/shared_cpu_map : 00000055 /sys/devices/system/cpu/cpu0/cache/index1/shared_cpu_map : 00000055 /sys/devices/system/cpu/cpu1/cache/index0/shared_cpu_map : 000000aa /sys/devices/system/cpu/cpu1/cache/index1/shared_cpu_map : 000000aa Signed-off-by:
-
Gautham R. Shenoy authored
POWER9 SMT8 cores consist of two groups of threads, where threads in each group shares L1-cache. The scheduler is not aware of this distinction as the current sched-domain hierarchy has all the threads of the core defined at the SMT domain. SMT [Thread siblings of the SMT8 core] DIE [CPUs in the same die] NUMA [All the CPUs in the system] Due to this, we can observe run-to-run variance when we run a multi-threaded benchmark bound to a single core based on how the scheduler spreads the software threads across the two groups in the core. We fix this in this patch by defining each group of threads which share L1-cache to be the SMT level. The group of threads in the SMT8 core is defined to be the CACHE level. The sched-domain hierarchy after this patch will be : SMT [Thread siblings in the core that share L1 cache] CACHE [Thread siblings that are in the SMT8 core] DIE [CPUs in the same die] NUMA [All the CPUs in the system] Signed-off-by:
-
Gautham R. Shenoy authored
On IBM POWER9, the device tree exposes a property array identifed by "ibm,thread-groups" which will indicate which groups of threads share a particular set of resources. As of today we only have one form of grouping identifying the group of threads in the core that share the L1 cache, translation cache and instruction data flow. This patch adds helper functions to parse the contents of "ibm,thread-groups" and populate a per-cpu variable to cache information about siblings of each CPU that share the L1, traslation cache and instruction data-flow. It also defines a new global variable named "has_big_cores" which indicates if the cores on this configuration have multiple groups of threads that share L1 cache. For each online CPU, it maintains a cpu_smallcore_mask, which indicates the online siblings which share the L1-cache with it. Signed-off-by:
-
Michael Ellerman authored
If GCC is not built with glibc support then we must explicitly tell it which register to use for TLS mode stack protector, otherwise it will error out and the cc-option check will fail. Signed-off-by: -
Michael Ellerman authored
This is helpful for debugging stack protector crashes. Signed-off-by: -
Joel Stanley authored
Commit 6c171994 ("powerpc/of: Remove useless register save/restore when calling OF back") removed the saving of srr0 and srr1 when calling into OpenFirmware. Commit e31aa453 ("powerpc: Use LOAD_REG_IMMEDIATE only for constants on 64-bit") did the same for rtas. This means we don't need to save the extra stack space and can use the common SWITCH_FRAME_SIZE. There were already no users of _SRR0 and _SRR1 so we can remove them too. Link: https://github.com/linuxppc/linux/issues/83Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Michael Bringmann authored
The powerpc mobility code may receive RTAS requests to perform PRRN (Platform Resource Reassignment Notification) topology changes at any time, including during LPAR migration operations. In some configurations where the affinity of CPUs or memory is being changed on that platform, the PRRN requests may apply or refer to outdated information prior to the complete update of the device-tree. This patch changes the duration for which topology updates are suppressed during LPAR migrations from just the rtas_ibm_suspend_me() / 'ibm,suspend-me' call(s) to cover the entire migration_store() operation to allow all changes to the device-tree to be applied prior to accepting and applying any PRRN requests. For tracking purposes, pr_info notices are added to the functions start_topology_update() and stop_topology_update() of 'numa.c'. Signed-off-by:
Michael Bringmann <mwb@linux.vnet.ibm.com> Reviewed-by:
-
Joel Stanley authored
Ever since commit 15a3204d ("powerpc/64s: Set assembler machine type to POWER4") we force -mpower4 to be passed to the assembler irrespective of the CFLAGS used (for Book3s 64). When building a powerpc64 kernel with clang, clang will not add -many to the assembler flags, so any instructions that the compiler has generated that are not available on power4 will cause an error: /usr/bin/as -a64 -mppc64 -mlittle-endian -mpower8 \ -I ./arch/powerpc/include -I ./arch/powerpc/include/generated \ -I ./include -I ./arch/powerpc/include/uapi \ -I ./arch/powerpc/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi -I arch/powerpc -I arch/powerpc \ -maltivec -mpower4 -o init/do_mounts.o /tmp/do_mounts-3b0a3d.s /tmp/do_mounts-51ce54.s:748: Error: unrecognized opcode: `isel' GCC does include -many, so the GCC driven gas call will succeed: as -v -I ./arch/powerpc/include -I ./arch/powerpc/include/generated -I ./include -I ./arch/powerpc/include/uapi -I ./arch/powerpc/include/generated/uapi -I ./include/uapi -I ./include/generated/uapi -I arch/powerpc -I arch/powerpc -a64 -mpower8 -many -mlittle -maltivec -mpower4 -o init/do_mounts.o Note that isel is power7 and above for IBM CPUs. GCC only generates it for Power9 and above, but the above test was run against the clang generated assembly. Peter Bergner explains: When using -many -mpower4, gas will first try and find a matching power4 mnemonic and failing that, it will then allow any valid mnemonic that gas knows about. GCC's use of -many predates me though. IIRC, Alan looked at trying to remove it, but I forget why he didn't. Could be either a gcc or gas issue at the time. I'm not sure whether issue still exists or not. He and I have modified how gas works internally a fair amount since he tried removing gcc use of -many. I will also note that when using -many, gas will choose the first mnemonic that matches in the mnemonic table and we have (mostly) sorted the table so that server mnemonics show up earlier in the table than other mnemonics, so they'll be seen/chosen first. By explicitly setting -many we can build with Clang and GCC while retaining the -mpower4 option. Signed-off-by:
-
YueHaibing authored
The variable 'aa_index' is defined as an unsigned value in update_lmb_associativity_index(), but find_aa_index() may return -1 when dlpar_clone_property() fails. So change find_aa_index() to return a bool, which indicates whether 'aa_index' was found or not. Fixes: c05a5a40 ("powerpc/pseries: Dynamic add entires to associativity lookup array") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by: Nathan Fontenot nfont@linux.vnet.ibm.com> [mpe: Tweak changelog, rename is_found to just found] Signed-off-by:
-
Sam Bobroff authored
Rather than mixing "if (state)" blocks and gotos, convert entirely to "if (state)" blocks to make the state machine behaviour clearer. Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by:
-
Sam Bobroff authored
The wait_state member of eeh_ops does not need to be platform dependent; it's just logic around eeh_ops.get_state(). Therefore, merge the two (slightly different!) platform versions into a new function, eeh_wait_state() and remove the eeh_ops member. While doing this, also correct: * The wait logic, so that it never waits longer than max_wait. * The wait logic, so that it never waits less than EEH_STATE_MIN_WAIT_TIME. * One call site where the result is treated like a bit field before it's checked for negative error values. * In pseries_eeh_get_state(), rename the "state" parameter to "delay" because that's what it is. Signed-off-by:
-
Sam Bobroff authored
Currently, eeh_pe_state_mark() marks a PE (and it's children) with a state and then performs additional processing if that state included EEH_PE_ISOLATED. The state parameter is always a constant at the call site, so rearrange eeh_pe_state_mark() into two functions and just call the appropriate one at each site. Signed-off-by:
-
Sam Bobroff authored
The function eeh_pe_state_mark_with_cfg() just performs the work of eeh_pe_state_mark() and then, conditionally, the work of eeh_pe_state_clear(). However it is only ever called with a constant state such that the condition is always true, so replace it by direct calls. Signed-off-by:
-
Sam Bobroff authored
Signed-off-by:
-
Sam Bobroff authored
Move the call to eeh_dev_to_pe() up, so that later it's clear that "pe" isn't NULL. Signed-off-by:
-
Sam Bobroff authored
Change the name of the fields in eeh_rmv_data to clarify their usage. Change "edev_list" to "removed_vf_list" because it does not contain generic edevs, but rather only edevs that contain virtual functions (which need to be removed during recovery). Similarly, change "removed" to "removed_dev_count" because it is a count of any removed devices, not just those in the above list. Signed-off-by:
-
Sam Bobroff authored
Instances of struct eeh_pe are placed in a tree structure using the fields "child_list" and "child", so place these next to each other in the definition. The field "child" is a list entry, so remove the unnecessary and misleading use of the list initializer, LIST_HEAD(), on it. The eeh_dev struct contains two list entry fields, called "list" and "rmv_list". Rename them to "entry" and "rmv_entry" and, as above, stop initializing them with LIST_HEAD(). Signed-off-by:
-
Sam Bobroff authored
Remove the unnecessary cast through void * on the first parameter and remove the unused second parameter (always NULL). Signed-off-by:
-
Sam Bobroff authored
The 'bus' member of struct eeh_dev is assigned to once but never used, so remove it. Signed-off-by:
-
Sam Bobroff authored
Currently a flag, EEH_POSTPONED_PROBE, is used to prevent an incorrect message "EEH: No capable adapters found" from being displayed during the boot of powernv systems. It is necessary because, on powernv, the call to eeh_probe_devices() made from eeh_init() is too early and EEH can't yet be enabled. A second call is made later from eeh_pnv_post_init(), which succeeds. (On pseries, the first call succeeds because PCI devices are set up early enough and no second call is made.) This can be simplified by moving the early call to eeh_probe_devices() from eeh_init() (where it's seen by both platforms) to pSeries_final_fixup(), so that each platform only calls eeh_probe_devices() once, at a point where it can succeed. This is slightly later in the boot sequence, but but still early enough and it is now in the same place in the sequence for both platforms (the pcibios_fixup hook). The display of the message can be cleaned up as well, by moving it into eeh_probe_devices(). Signed-off-by:
-
Sam Bobroff authored
eeh_add_to_parent_pe() sometimes removes the EEH_PE_KEEP flag, but it incorrectly removes it from pe->type, instead of pe->state. However, rather than clearing it from the correct field, remove it. Inspection of the code shows that it can't ever have had any effect (even if it had been cleared from the correct field), because the field is never tested after it is cleared by the statement in question. The clear statement was added by commit 807a827d ("powerpc/eeh: Keep PE during hotplug"), but it didn't explain why it was necessary. Signed-off-by:
-
Sam Bobroff authored
If a device is removed during EEH processing (either by a driver's handler or as part of recovery), it can lead to a null dereference in eeh_pe_report_edev(). To handle this, skip devices that have been removed. Signed-off-by:
-
Sam Bobroff authored
If an error occurs during an unplug operation, it's possible for eeh_dump_dev_log() to be called when edev->pdn is null, which currently leads to dereferencing a null pointer. Handle this by skipping the error log for those devices. Signed-off-by:
-
Joel Stanley authored
The boot wrapper is currently built with -Os. By building with O2 we can meaningfully reduce the time decompressing the kernel. I tested by comparing 10 runs of each option in Qemu and on hardware. The kernel is compressed with KERNEL_XZ built with GCC 8.2.0-7ubuntu1. The values are counts of the timebase. Qemu TCG powernv Power8: Os O2 O3 median 10221123889 6201518438 6568186825 stddev 1361267211 429090641 657930076 improvement 39.33% 35.74% Palmetto Power8: Os O2 O3 median 50279 50599 35790 stddev 992144533 627130655 623721078 improvement 36.79% 37.13% Romulus Power9: Os O2 O3 median 670312391 454733720 448881398 stddev 157569 107276 108760 improvement 32.16% 33.03% TCG was quite noisy, with every few runs producing an outlier. Even so, O2 is faster than O3. On hardware the numbers were less noisy and O3 is slightly faster than O2. The wrapper size increases when moving from Os. Comparing zImage.epapr to the existing Os build using bloat-o-meter: Before=43401, After=56837 (13KB), chg +30.96% Before=43401, After=64305 (20KB), chg +48.16% I chose O2 for a balance between Qemu and hardware speed up. Signed-off-by: -
Joel Stanley authored
This will avoid auto-vectorisation when building with higher optimisation levels. We don't know if the machine can support VSX and even if it's present it's probably not going to be enabled at this point in boot. These flag were both added prior to GCC 4.6 which is the minimum compiler version supported by upstream, thanks to Segher for the details. Signed-off-by:
-
Joel Stanley authored
As of commit 10c77dba ("powerpc/boot: Fix build failure in 32-bit boot wrapper") the opal code is hidden behind CONFIG_PPC64_BOOT_WRAPPER, but the boot wrapper avoids include/linux, so it does not get the normal Kconfig flags. We can drop the guard entirely as in commit f8e8e69c ("powerpc/boot: Only build OPAL code when necessary") the makefile only includes opal.c in the build if CONFIG_PPC64_BOOT_WRAPPER is set. Fixes: 10c77dba ("powerpc/boot: Fix build failure in 32-bit boot wrapper") Signed-off-by:
-
Joel Stanley authored
Currently the wrapper is built without including anything in $(src)/include/, which means there are no CONFIG_ symbols defined. This means the platform specific serial drivers were never enabled. We now copy the definitions into the boot directory, so any C file can now include autoconf.h to depend on configuration options. Fixes: 866bfc75 ("powerpc: conditionally compile platform-specific serial drivers") Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
'default n' is the default value for any bool or tristate Kconfig setting so there is no need to write it explicitly. Also since commit f467c564 ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols") the Kconfig behavior is the same regardless of 'default n' being present or not: ... One side effect of (and the main motivation for) this change is making the following two definitions behave exactly the same: config FOO bool config FOO bool default n With this change, neither of these will generate a '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied). That might make it clearer to people that a bare 'default n' is redundant. ... Signed-off-by:
-
Oliver O'Halloran authored
Currently when we get an unknown RTAS event it prints the type as "Unknown" and no other useful information. Add the raw type code to the log message so that we have something to work off. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Reviewed-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by:
-
Joel Stanley authored
The powerpc kernel uses setjmp which causes a warning when building with clang: In file included from arch/powerpc/xmon/xmon.c:51: ./arch/powerpc/include/asm/setjmp.h:15:13: error: declaration of built-in function 'setjmp' requires inclusion of the header <setjmp.h> [-Werror,-Wbuiltin-requires-header] extern long setjmp(long *); ^ ./arch/powerpc/include/asm/setjmp.h:16:13: error: declaration of built-in function 'longjmp' requires inclusion of the header <setjmp.h> [-Werror,-Wbuiltin-requires-header] extern void longjmp(long *, long); ^ This *is* the header and we're not using the built-in setjump but rather the one in arch/powerpc/kernel/misc.S. As the compiler warning does not make sense, it for the files where setjmp is used. Signed-off-by:Nick Desaulniers <ndesaulniers@google.com> [mpe: Move subdir-ccflags in xmon/Makefile to not clobber -Werror] Signed-off-by:
-
Dan Carpenter authored
The "count < sizeof(struct os_area_db)" comparison is type promoted to size_t so negative values of "count" are treated as very high values and we accidentally return success instead of a negative error code. This doesn't really change runtime much but it fixes a static checker warning. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
Joel Stanley authored
On a Power9 box we get a few screens full of these on boot. Drop them to pr_debug. [ 5.993645] nest_centaur6_imc performance monitor hardware support registered [ 5.993728] nest_centaur7_imc performance monitor hardware support registered [ 5.996510] core_imc performance monitor hardware support registered [ 5.996569] nest_mba0_imc performance monitor hardware support registered [ 5.996631] nest_mba1_imc performance monitor hardware support registered [ 5.996685] nest_mba2_imc performance monitor hardware support registered Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Reviewed-by:
Stewart Smith <stewart@linux.ibm.com> Signed-off-by:
-
