- 01 Apr, 2008 14 commits
-
-
Mohamed Abbas authored
This patch add notification function to be called by low level iwl driver to notify iwlcore with current state. This function will call iwlcore subsystem with the new state. This will help make the code more consistent and easy to extend. For example the rf-kill need to know when the driver in init, start, stop or remove state. Instead doing the same call in 3945 and 4965, we just do it from this function. Signed-off-by:
Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Andrew Morton authored
This bool causes my gcc-4.1.0 alpha cross compiler to go into an infinite loop. Switching it to u8 works around that. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
John W. Linville authored
These small changes restore the rt2x00 sources to the way Ivo intended. Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Holger Schurig authored
Runtime-wise we only need escape_ssid from the deprecated IEEE80211 subsystem. However, it's easy to provide our own copy. Signed-off-by:
Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Holger Schurig authored
Confirm sleep event: they come very regularly, eventually several times per second. Therefore we want to send the config command as fast as possible. The old code pre-set the command in priv->lbs_ps_confirm_sleep. However, the byte sequence to be sent to the hardware is the same for all interfaces. So this patch make this an extern structure, initialized at module load time. Config wake event: normal conversion to a direct command. However, I don't know how to trigger a "HOST AWAKE" event from the firmware, so this part is untested. Signed-off-by:
-
Holger Schurig authored
Signed-off-by:
-
Holger Schurig authored
* directly call lbs_cmd_with_response() * only overwrite priv->current_addr once the firmware call succeeded Signed-off-by:
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Pavel Emelyanov authored
Do with the sockstat6 file what we've already done for the sockstat. Same good side effect - ipv6 reassembling stats are now shown per-net. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavel Emelyanov authored
Besides, now we can see per-net fragments statistics in the same file, since this stats is already per-net. Signed-off-by:
-
Pavel Emelyanov authored
Currently they live in init_net only, but now almost all the info they can provide is available per-net. Signed-off-by:
-
Pavel Emelyanov authored
Such an accounting would cost us two more dereferences to get the percpu variable from the struct net, so I make sock_prot_inuse_get and _add calls work differently depending on CONFIG_NET_NS - without it old optimized routines are used. The per-cpu counter for init_net is prepared in core_initcall, so that even af_inet, that starts as fs_initcall, will already have the init_net prepared. Signed-off-by:
-
Pavel Emelyanov authored
This counter is about to become per-proto-and-per-net, so we'll need two arguments to determine which cell in this "table" to work with. All the places, but proc already pass proper net to it - proc will be tuned a bit later. Some indentation with spaces in proc files is done to keep the file coding style consistent. Signed-off-by:
-
Pavel Emelyanov authored
There's already some stuff on the struct net, that should better be folded into netns_core structure. I'm making the per-proto inuse counter be per-net also, which is also a candidate for this, so introduce this structure and populate it a bit. Signed-off-by:
-
- 31 Mar, 2008 1 commit
-
-
David S. Miller authored
As reported by Haavard Skinnemoen and Stephen Rothwell: > allnoconfig fails with > > include/linux/netdevice.h:843: error: implicit declaration of function 'dev_net' > > which seems to be because the definition of dev_net is inside #ifdef > CONFIG_NET, while next_net_device, which calls it, is not. Signed-off-by:
-
- 29 Mar, 2008 21 commits
-
-
David S. Miller authored
-
Jeff Kirsher authored
This reorganization moves the PHY status into a separate struct. Flow Control setup is moved into this struct as well and frame size away from here into the adapter struct where its inly use is. The post-link-up code is now a separate function and moved out of the watchdog function itself. This allows us to track the es2lan restart issue a bit easier. Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Jeff Kirsher authored
Rename this function to be consistent with function naming (verb first) Signed-off-by:
-
Bruce Allan authored
Adjusting the comment blocks here to be code-style compliant. no code changes. Changed some copyright dates to 2008. Indentation fixes. Signed-off-by:
-
Denis V. Lunev authored
Under CONFIG_DCA the compilation is broken since the commit bd0362dd (ixgbe: Add optional DCA infrastructure). IXGBE_SUCCESS is not defined anywhere, replace it with 0. Signed-off-by:
Denis V. Lunev <den@openvz.org> Signed-off-by:
-
Mariusz Kozlowski authored
The code is under unused #ifdef NO_TXSTATS branch but its better to have it fixed. Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
-
Daniel Walker authored
Convert the port_lock to a mutex. There is also some additional cleanup. The line length inside the ehea_rereg_mrs was getting long so I made some adjustments to shorten them. [akpm@linux-foundation.org: dec99ification] Signed-off-by:
Daniel Walker <dwalker@mvista.com> Cc: Christoph Raisch <raisch@de.ibm.com> Cc: Jan-Bernd Themann <themann@de.ibm.com> Cc: Thomas Klein <tklein@de.ibm.com> Signed-off-by:
-
Daniel Walker authored
Convert the ehea_bcmc_regs.lock to a mutex. Signed-off-by:
-
Daniel Walker authored
Nested locks always need to be taken in the same order. This change factors out the ehea_fw_handles.lock to make the locking order consistent. Signed-off-by:
-
Daniel Walker authored
Converted the ehea_fw_handles.lock to a mutex. Signed-off-by:
-
Daniel Walker authored
Converted the dlpar_mem_lock. With a bit of cleanup, I converted to DEFINE_MUTEX() instead of a runtime init. I also made the lock static. Signed-off-by:
Jan-Bernd Themann <themann@de.ibm.com> Cc: Thomas Klein <tklein@de.ibm.com> Signed-off-by:
-
S.Caglar Onur authored
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. So use the time_after() macro, defined in linux/jiffies.h, which deals with wrapping correctly. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
S.Caglar Onur <caglar@pardus.org.tr> Signed-off-by:
-
S.Caglar Onur authored
The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. So use the time_after() macro, defined in linux/jiffies.h, which deals with wrapping correctly. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Ondrej Zary authored
Convert 3c509 driver to isa_driver and pnp_driver. The result is that autoloading using udev and hibernation works with ISA PnP cards. It also adds hibernation support for non-PnP ISA cards. xcvr module parameter was removed as its value was not used. Tested using 3 ISA cards in various combinations of PnP and non-PnP modes. EISA and MCA only compile-tested. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Denis V. Lunev authored
Move it to udp_seq_afinfo->seq_fops as should be. Signed-off-by:
-
Denis V. Lunev authored
No need to have separate never-used variable. Signed-off-by:
-
Denis V. Lunev authored
Replace seq_open with seq_open_net and remove udp_seq_release completely. seq_release_net will do this job just fine. Signed-off-by:
-
Denis V. Lunev authored
No need to create seq_operations for each instance of 'netstat'. Signed-off-by:
-
Denis V. Lunev authored
udp_proc_register/udp_proc_unregister are called with a static pointer only. Signed-off-by:
-
Denis V. Lunev authored
Signed-off-by:
-
David S. Miller authored
Noticed by Joe Perches. Signed-off-by:
-
- 28 Mar, 2008 4 commits
-
-
Pavel Emelyanov authored
The knock-out. The pcounter abstraction is not used any longer in the kernel. Not sure whether this should go via netdev tree, but as far as I remember it was added via this one, and besides Eric thinks that Andrew shouldn't mind this. Signed-off-by:
-
Pavel Emelyanov authored
An uppercut - do not use the pcounter on struct proto. Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Pavel Emelyanov authored
Constructive part of the set is finished here. We have to remove the pcounter, so start with its init and free functions. Signed-off-by:
-
Pavel Emelyanov authored
And redirect sock_prot_inuse_add and _get to use one. As far as the dereferences are concerned. Before the patch we made 1 dereference to proto->inuse.add call, the call itself and then called the __get_cpu_var() on a static variable. After the patch we make a direct call, then one dereference to proto->inuse_idx and then the same __get_cpu_var() on a still static variable. So this patch doesn't seem to produce performance penalty on SMP. This is not per-net yet, but I will deliberately make NET_NS=y case separated from NET_NS=n one, since it'll cost us one-or-two more dereferences to get the struct net and the inuse counter. Signed-off-by:
-
