Pull ceph updates from Ilya Dryomov:
 "The highlights include:

   - a large series of fixes and improvements to the snapshot-handling
     code (Zheng Yan)

   - individual read/write OSD requests passed down to libceph are now
     limited to 16M in size to avoid hitting OSD-side limits (Zheng Yan)

   - encode MStatfs v2 message to allow for more accurate space usage
     reporting (Douglas Fuller)

   - switch to the new writeback error tracking infrastructure (Jeff
     Layton)"

* tag 'ceph-for-4.14-rc1' of git://github.com/ceph/ceph-client: (35 commits)
  ceph: stop on-going cached readdir if mds revokes FILE_SHARED cap
  ceph: wait on writeback after writing snapshot data
  ceph: fix capsnap dirty pages accounting
  ceph: ignore wbc->range_{start,end} when write back snapshot data
  ceph: fix "range cyclic" mode writepages
  ceph: cleanup local variables in ceph_writepages_start()
  ceph: optimize pagevec iterating in ceph_writepages_start()
  ceph: make writepage_nounlock() invalidate page that beyonds EOF
  ceph: properly get capsnap's size in get_oldest_context()
  ceph: remove stale check in ceph_invalidatepage()
  ceph: queue cap snap only when snap realm's context changes
  ceph: handle race between vmtruncate and queuing cap snap
  ceph: fix message order check in handle_cap_export()
  ceph: fix NULL pointer dereference in ceph_flush_snaps()
  ceph: adjust 36 checks for NULL pointers
  ceph: delete an unnecessary return statement in update_dentry_lease()
  ceph: ENOMEM pr_err in __get_or_create_frag() is redundant
  ceph: check negative offsets in ceph_llseek()
  ceph: more accurate statfs
  ceph: properly set snap follows for cap reconnect
  ...

If using a kernel with CONFIG_XFS_RT=y and we set the RHINHERIT flag on
a directory in a filesystem that does not have a realtime device and
create a new file in that directory, it gets marked as a real time file.
When data is written and a fsync is issued, the filesystem attempts to
flush a non-existent rt device during the fsync process.

This results in a crash dereferencing a null buftarg pointer in
xfs_blkdev_issue_flush():

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: xfs_blkdev_issue_flush+0xd/0x20
  .....
  Call Trace:
    xfs_file_fsync+0x188/0x1c0
    vfs_fsync_range+0x3b/0xa0
    do_fsync+0x3d/0x70
    SyS_fsync+0x10/0x20
    do_syscall_64+0x4d/0xb0
    entry_SYSCALL64_slow_path+0x25/0x25

Setting RT inode flags does not require special privileges so any
unprivileged user can cause this oops to occur.  To reproduce, confirm
kernel is compiled with CONFIG_XFS_RT=y and run:

  # mkfs.xfs -f /dev/pmem0
  # mount /dev/pmem0 /mnt/test
  # mkdir /mnt/test/foo
  # xfs_io -c 'chattr +t' /mnt/test/foo
  # xfs_io -f -c 'pwrite 0 5m' -c fsync /mnt/test/foo/bar

Or just run xfstests with MKFS_OPTIONS="-d rtinherit=1" and wait.

Kernels built with CONFIG_XFS_RT=n are not exposed to this bug.

Fixes: f538d4da ("[XFS] write barrier support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Richard Wareing <rwareing@fb.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull dma-mapping updates from Christoph Hellwig:

 - removal of the old dma_alloc_noncoherent interface

 - remove unused flags to dma_declare_coherent_memory

 - restrict OF DMA configuration to specific physical busses

 - use the iommu mailing list for dma-mapping questions and patches

* tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping:
  dma-coherent: fix dma_declare_coherent_memory() logic error
  ARM: imx: mx31moboard: Remove unused 'dma' variable
  dma-coherent: remove an unused variable
  MAINTAINERS: use the iommu list for the dma-mapping subsystem
  dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flags
  dma-coherent: remove the DMA_MEMORY_INCLUDES_CHILDREN flag
  of: restrict DMA configuration
  dma-mapping: remove dma_alloc_noncoherent and dma_free_noncoherent
  i825xx: switch to switch to dma_alloc_attrs
  au1000_eth: switch to dma_alloc_attrs
  sgiseeq: switch to dma_alloc_attrs
  dma-mapping: reduce dma_mapping_error inline bloat

Pull uuid updates from Christoph Hellwig:
 "Just a single conversion to the new UUID API for this merge window"

* tag 'uuid-for-4.14' of git://git.infradead.org/users/hch/uuid:
  efi: switch to use new generic UUID API

Pull selinux updates from Paul Moore:
 "A relatively quiet period for SELinux, 11 patches with only two/three
  having any substantive changes.

  These noteworthy changes include another tweak to the NNP/nosuid
  handling, per-file labeling for cgroups, and an object class fix for
  AF_UNIX/SOCK_RAW sockets; the rest of the changes are minor tweaks or
  administrative updates (Stephen's email update explains the file
  explosion in the diffstat).

  Everything passes the selinux-testsuite"

[ Also a couple of small patches from the security tree from Tetsuo
  Handa for Tomoyo and LSM cleanup. The separation of security policy
  updates wasn't all that clean - Linus ]

* tag 'selinux-pr-20170831' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: constify nf_hook_ops
  selinux: allow per-file labeling for cgroupfs
  lsm_audit: update my email address
  selinux: update my email address
  MAINTAINERS: update the NetLabel and Labeled Networking information
  selinux: use GFP_NOWAIT in the AVC kmem_caches
  selinux: Generalize support for NNP/nosuid SELinux domain transitions
  selinux: genheaders should fail if too many permissions are defined
  selinux: update the selinux info in MAINTAINERS
  credits: update Paul Moore's info
  selinux: Assign proper class to PF_UNIX/SOCK_RAW sockets
  tomoyo: Update URLs in Documentation/admin-guide/LSM/tomoyo.rst
  LSM: Remove security_task_create() hook.

Pull x86 fixes from Ingo Molnar:
 "Two fixes: dead code removal, plus a SME memory encryption fix on
  32-bit kernels that crashed Xen guests"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Remove unused and undefined __generic_processor_info() declaration
  x86/mm: Make the SME mask a u64

Pull scheduler fixes from Ingo Molnar:
 "Three fixes:

   - fix a suspend/resume cpusets bug

   - fix a !CONFIG_NUMA_BALANCING bug

   - fix a kerneldoc warning"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix nuisance kernel-doc warning
  sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs
  sched/fair: Fix wake_affine_llc() balancing rules

Pull perf tooling updates from Ingo Molnar:
 "Perf tooling updates and fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf annotate browser: Help for cycling thru hottest instructions with TAB/shift+TAB
  perf stat: Only auto-merge events that are PMU aliases
  perf test: Add test case for PERF_SAMPLE_PHYS_ADDR
  perf script: Support physical address
  perf mem: Support physical address
  perf sort: Add sort option for physical address
  perf tools: Support new sample type for physical address
  perf vendor events powerpc: Remove duplicate events
  perf intel-pt: Fix syntax in documentation of config option
  perf test powerpc: Fix 'Object code reading' test
  perf trace: Support syscall name globbing
  perf syscalltbl: Support glob matching on syscall names
  perf report: Calculate the average cycles of iterations

Pull irq fixes from Ingo Molnar:
 "A sparse irq race/locking fix, and a MSI irq domains population fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Make sparse_irq_lock protect what it should protect
  genirq/msi: Fix populating multiple interrupts

Pull ARM updates from Russell King:
 "Low priority fixes and updates for ARM:

   - add some missing includes

   - efficiency improvements in system call entry code when tracing is
     enabled

   - ensure ARMv6+ is always built as EABI

   - export save_stack_trace_tsk()

   - fix fatal signal handling during mm fault

   - build translation table base address register from scratch

   - appropriately align the .data section to a word boundary where we
     rely on that data being word aligned"

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8691/1: Export save_stack_trace_tsk()
  ARM: 8692/1: mm: abort uaccess retries upon fatal signal
  ARM: 8690/1: lpae: build TTB control register value from scratch in v7_ttb_setup
  ARM: align .data section
  ARM: always enable AEABI for ARMv6+
  ARM: avoid saving and restoring registers unnecessarily
  ARM: move PC value into r9
  ARM: obtain thread info structure later
  ARM: use aliases for registers in entry-common
  ARM: 8689/1: scu: add missing errno include
  ARM: 8688/1: pm: add missing types include

Pull more s390 updates from Martin Schwidefsky:
 "The second patch set for the 4.14 merge window:

   - Convert the dasd device driver to the blk-mq interface.

   - Provide three zcrypt interfaces for vfio_ap. These will be required
     for KVM guest access to the crypto cards attached via the AP bus.

   - A couple of memory management bug fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/dasd: blk-mq conversion
  s390/mm: use a single lock for the fields in mm_context_t
  s390/mm: fix race on mm->context.flush_mm
  s390/mm: fix local TLB flushing vs. detach of an mm address space
  s390/zcrypt: externalize AP queue interrupt control
  s390/zcrypt: externalize AP config info query
  s390/zcrypt: externalize test AP queue
  s390/mm: use VM_BUG_ON in crst_table_[upgrade|downgrade]

Pull thermal updates from Zhang Rui:

 - fix resources release in error paths when registering thermal zone.
   (Christophe Jaillet)

 - introduce a new thermal driver for on-chip PVT (Process, Voltage and
   Temperature) monitoring unit implemented on UniPhier SoCs. This
   driver supports temperature monitoring and alert function. (Kunihiko
   Hayashi)

 - Add support for mt2712 chip in the mtk_thermal driver. (Louis Yu)

 - Add support for RK3328 SOC in rockchip_thermal driver. (Rocky Hao)

 - cleanup a couple of platform thermal drivers to constify
   thermal_zone_of_device_ops structures. (Julia Lawall)

 - a couple of fixes in int340x and intel_pch_thermal thermal driver.
   (Arvind Yadav, Sumeet Pawnikar, Brian Bian, Ed Swierk, Zhang Rui)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (27 commits)
  Thermal: int3406_thermal: fix thermal sysfs I/F
  thermal: mediatek: minor mtk_thermal.c cleanups
  thermal: mediatek: extend calibration data for mt2712 chip
  thermal: mediatek: add Mediatek thermal driver for mt2712
  dt-bindings: thermal: Add binding document for Mediatek thermal controller
  thermal: intel_pch_thermal: Fix enable check on Broadwell-DE
  thermal: rockchip: Support the RK3328 SOC in thermal driver
  dt-bindings: rockchip-thermal: Support the RK3328 SoC compatible
  thermal: bcm2835: constify thermal_zone_of_device_ops structures
  thermal: exynos: constify thermal_zone_of_device_ops structures
  thermal: zx2967: constify thermal_zone_of_device_ops structures
  thermal: rcar_gen3_thermal: constify thermal_zone_of_device_ops structures
  thermal: qoriq: constify thermal_zone_of_device_ops structures
  thermal: hisilicon: constify thermal_zone_of_device_ops structures
  thermal: core: Fix resources release in error paths in thermal_zone_device_register()
  thermal: core: Use the new 'thermal_zone_destroy_device_groups()' helper function
  thermal: core: Add some new helper functions to free resources
  thermal: int3400_thermal: process "thermal table changed" event
  thermal: uniphier: add UniPhier thermal driver
  dt-bindings: thermal: add binding documentation for UniPhier thermal monitor
  ...

Pull NFS client updates from Trond Myklebust:
 "Hightlights include:

  Stable bugfixes:
   - Fix mirror allocation in the writeback code to avoid a use after
     free
   - Fix the O_DSYNC writes to use the correct byte range
   - Fix 2 use after free issues in the I/O code

  Features:
   - Writeback fixes to split up the inode->i_lock in order to reduce
     contention
   - RPC client receive fixes to reduce the amount of time the
     xprt->transport_lock is held when receiving data from a socket into
     am XDR buffer.
   - Ditto fixes to reduce contention between call side users of the
     rdma rb_lock, and its use in rpcrdma_reply_handler.
   - Re-arrange rdma stats to reduce false cacheline sharing.
   - Various rdma cleanups and optimisations.
   - Refactor the NFSv4.1 exchange id code and clean up the code.
   - Const-ify all instances of struct rpc_xprt_ops

  Bugfixes:
   - Fix the NFSv2 'sec=' mount option.
   - NFSv4.1: don't use machine credentials for CLOSE when using
     'sec=sys'
   - Fix the NFSv3 GRANT callback when the port changes on the server.
   - Fix livelock issues with COMMIT
   - NFSv4: Use correct inode in _nfs4_opendata_to_nfs4_state() when
     doing and NFSv4.1 open by filehandle"

* tag 'nfs-for-4.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (69 commits)
  NFS: Count the bytes of skipped subrequests in nfs_lock_and_join_requests()
  NFS: Don't hold the group lock when calling nfs_release_request()
  NFS: Remove pnfs_generic_transfer_commit_list()
  NFS: nfs_lock_and_join_requests and nfs_scan_commit_list can deadlock
  NFS: Fix 2 use after free issues in the I/O code
  NFS: Sync the correct byte range during synchronous writes
  lockd: Delete an error message for a failed memory allocation in reclaimer()
  NFS: remove jiffies field from access cache
  NFS: flush data when locking a file to ensure cache coherence for mmap.
  SUNRPC: remove some dead code.
  NFS: don't expect errors from mempool_alloc().
  xprtrdma: Use xprt_pin_rqst in rpcrdma_reply_handler
  xprtrdma: Re-arrange struct rx_stats
  NFS: Fix NFSv2 security settings
  NFSv4.1: don't use machine credentials for CLOSE when using 'sec=sys'
  SUNRPC: ECONNREFUSED should cause a rebind.
  NFS: Remove unused parameter gfp_flags from nfs_pageio_init()
  NFSv4: Fix up mirror allocation
  SUNRPC: Add a separate spinlock to protect the RPC request receive list
  SUNRPC: Cleanup xs_tcp_read_common()
  ...

Pull namespace updates from Eric Biederman:
 "Life has been busy and I have not gotten half as much done this round
  as I would have liked. I delayed it so that a minor conflict
  resolution with the mips tree could spend a little time in linux-next
  before I sent this pull request.

  This includes two long delayed user namespace changes from Kirill
  Tkhai. It also includes a very useful change from Serge Hallyn that
  allows the security capability attribute to be used inside of user
  namespaces. The practical effect of this is people can now untar
  tarballs and install rpms in user namespaces. It had been suggested to
  generalize this and encode some of the namespace information
  information in the xattr name. Upon close inspection that makes the
  things that should be hard easy and the things that should be easy
  more expensive.

  Then there is my bugfix/cleanup for signal injection that removes the
  magic encoding of the siginfo union member from the kernel internal
  si_code. The mips folks reported the case where I had used FPE_FIXME
  me is impossible so I have remove FPE_FIXME from mips, while at the
  same time including a return statement in that case to keep gcc from
  complaining about unitialized variables.

  I almost finished the work to get make copy_siginfo_to_user a trivial
  copy to user. The code is available at:

     git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git neuter-copy_siginfo_to_user-v3

  But I did not have time/energy to get the code posted and reviewed
  before the merge window opened.

  I was able to see that the security excuse for just copying fields
  that we know are initialized doesn't work in practice there are buggy
  initializations that don't initialize the proper fields in siginfo. So
  we still sometimes copy unitialized data to userspace"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  Introduce v3 namespaced file capabilities
  mips/signal: In force_fcr31_sig return in the impossible case
  signal: Remove kernel interal si_code magic
  fcntl: Don't use ambiguous SIG_POLL si_codes
  prctl: Allow local CAP_SYS_ADMIN changing exe_file
  security: Use user_namespace::level to avoid redundant iterations in cap_capable()
  userns,pidns: Verify the userns for new pid namespaces
  signal/testing: Don't look for __SI_FAULT in userspace
  signal/mips: Document a conflict with SI_USER with SIGFPE
  signal/sparc: Document a conflict with SI_USER with SIGFPE
  signal/ia64: Document a conflict with SI_USER with SIGFPE
  signal/alpha: Document a conflict with SI_USER for SIGTRAP

Pull libnvdimm from Dan Williams:
 "A rework of media error handling in the BTT driver and other updates.
  It has appeared in a few -next releases and collected some late-
  breaking build-error and warning fixups as a result.

  Summary:

   - Media error handling support in the Block Translation Table (BTT)
     driver is reworked to address sleeping-while-atomic locking and
     memory-allocation-context conflicts.

   - The dax_device lookup overhead for xfs and ext4 is moved out of the
     iomap hot-path to a mount-time lookup.

   - A new 'ecc_unit_size' sysfs attribute is added to advertise the
     read-modify-write boundary property of a persistent memory range.

   - Preparatory fix-ups for arm and powerpc pmem support are included
     along with other miscellaneous fixes"

* tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits)
  libnvdimm, btt: fix format string warnings
  libnvdimm, btt: clean up warning and error messages
  ext4: fix null pointer dereference on sbi
  libnvdimm, nfit: move the check on nd_reserved2 to the endpoint
  dax: fix FS_DAX=n BLOCK=y compilation
  libnvdimm: fix integer overflow static analysis warning
  libnvdimm, nd_blk: remove mmio_flush_range()
  libnvdimm, btt: rework error clearing
  libnvdimm: fix potential deadlock while clearing errors
  libnvdimm, btt: cache sector_size in arena_info
  libnvdimm, btt: ensure that flags were also unchanged during a map_read
  libnvdimm, btt: refactor map entry operations with macros
  libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write path
  libnvdimm, nfit: export an 'ecc_unit_size' sysfs attribute
  ext4: perform dax_device lookup at mount
  ext2: perform dax_device lookup at mount
  xfs: perform dax_device lookup at mount
  dax: introduce a fs_dax_get_by_bdev() helper
  libnvdimm, btt: check memory allocation failure
  libnvdimm, label: fix index block size calculation
  ...

Merge tag 'pwm/for-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The changes for this release include a new driver for the PWM
  controller found on SoCs of the ZTX ZX family. Support for an old
  SH-Mobile SoC has been dropped and the Rockchip and MediaTek drivers
  gain support for more generations.

  Other than that there are a bunch of coding style fixes, minor bug
  fixes and cleanup as well as documentation patches"

* tag 'pwm/for-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (32 commits)
  pwm: pwm-samsung: fix suspend/resume support
  pwm: samsung: Remove redundant checks from pwm_samsung_config()
  pwm: mediatek: Disable clock on PWM configuration failure
  dt-bindings: pwm: Add MT2712/MT7622 information
  pwm: mediatek: Fix clock control issue
  pwm: mediatek: Fix PWM source clock selection
  pwm: mediatek: Fix Kconfig description
  pwm: tegra: Explicitly request exclusive reset control
  pwm: hibvt: Explicitly request exclusive reset control
  pwm: tiehrpwm: Set driver data before runtime PM enable
  pwm: tiehrpwm: Miscellaneous coding style fixups
  pwm: tiecap: Set driver data before runtime PM enable
  pwm: tiecap: Miscellaneous coding style fixups
  dt-bindings: pwm: tiecap: Add TI 66AK2G SoC specific compatible
  pwm: tiehrpwm: fix clock imbalance in probe error path
  pwm: tiehrpwm: Fix runtime PM imbalance at unbind
  pwm: Kconfig: Enable pwm-tiecap to be built for Keystone
  pwm: Add ZTE ZX PWM device driver
  dt-bindings: pwm: Add bindings doc for ZTE ZX PWM controller
  pwm: bcm2835: Support for polarity setting via DT
  ...

Pull bluetooth fix from Marcel Holtmann:
 "All of our mgmt-tester, l2cap-test and rfcomm-tester unit tests are
  passing with this patch"

* emailed patch from Marcel Holtmann <marcel@holtmann.org>:
  Bluetooth: Properly check L2CAP config option output buffer length

The following revert:

  2b85b3d2 ("x86/acpi: Restore the order of CPU IDs")

... got rid of __generic_processor_info(), but forgot to remove its
declaration in mpspec.h.

Remove the declaration and update the comments as well.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1505101403-29100-1-git-send-email-douly.fnst@cn.fujitsu.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Work around kernel-doc warning ('*' in Sphinx doc means "emphasis"):

  ../kernel/sched/fair.c:7584: WARNING: Inline emphasis start-string without end-string.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f18b30f9-6251-6d86-9d44-16501e386891@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

This reverts commit 81f95076.

It causes random failures of firmware loading at resume time (well,
random for me, it seems to be more reliable for others) because the
firmware disabling is not actually synchronous with any particular
resume event, and at least the btusb driver that uses a workqueue to
load the firmware at resume seems to occasionally hit the "firmware
loading is disabled" logic because the firmware loader hasn't gotten the
resume event yet.

Some kind of sanity check for not trying to load firmware when it's not
possible might be a good thing, but this commit was not it.

Greg seems to have silently suffered the same issue, and pointed to the
likely culprit, and Gabriel C verified the revert fixed it for him too.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Pointed-at-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Gabriel C <nix.or.die@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull m68knommu updates from Greg Ungerer:
 "Only two changes. One removes unused code, the other makes local clock
  code arguments consistent with generic clock code"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: remove dead code
  m68k: allow NULL clock for clk_get_rate

Pull ARM/arm64 Devicetree updates from Olof Johansson:
 "As usual, device tree updates is the bulk of our material in this
  merge window. This time around, 559 patches affecting both 32- and
  64-bit platforms.

  Changes are too many to list individually, but some of the larger
  ones:

  New platform/SoC support:

   - Automotive:
     + Renesas R-Car D3 (R8A77995)
     + TI DT76x
     + MediaTek mt2712e
   - Communication-oriented:
     + Qualcomm IPQ8074
     + Broadcom Stingray
     + Marvell Armada 8080
   - Set top box:
     + Uniphier PXs3

  Besides some vendor reference boards for the SoC above, there are also
  several new boards/machines:

   - TI AM335x Moxa UC-8100-ME-T open platform
   - TI AM57xx Beaglebone X15 Rev C
   - Microchip/Atmel sama5d27 SoM1 EK
   - Broadcom Raspberry Pi Zero W
   - Gemini-based D-Link DIR-685 router
   - Freescale i.MX6:
     + Toradex Apalis module + Apalis and Ixora carrier boards
     + Engicam GEAM6UL Starter Kit
   - Freescale i.MX53-based Beckhoff CX9020 Embedded PC
   - Mediatek mt7623-based BananaPi R2
   - Several Allwinner-based single-board computers:
  + Cubietruck plus
  + Bananapi M3, M2M and M64
  + NanoPi A64
  + A64-OLinuXino
  + Pine64
   - Rockchip RK3328 Pine64/Rock64 board support
   - Rockchip RK3399 boards:
  + RK3399 Sapphire module on Excavator carrier (RK3399 reference design)
  + Theobroma Systems RK3399-Q7 SoM
   - ZTE ZX296718 PCBOX Board"

* tag 'armsoc-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (559 commits)
  ARM: dts: at91: at91sam9g45: add AC97
  arm64: dts: marvell: mcbin: enable more networking ports
  arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node
  arm64: dts: marvell: add TX interrupts for PPv2.2
  arm64: dts: uniphier: add PXs3 SoC support
  ARM: dts: uniphier: add pinctrl groups of ethernet phy mode
  ARM: dts: uniphier: fix size of sdctrl nodes
  ARM: dts: uniphier: add AIDET nodes
  arm64: dts: uniphier: fix size of sdctrl node
  arm64: dts: uniphier: add AIDET nodes
  Revert "ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Beelink X2"
  arm64: dts: uniphier: add reset controller node of analog amplifier
  arm64: dts: marvell: add Device Tree files for Armada-8KP
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  ARM: dts: rockchip: enable usb for rv1108-evb
  ARM: dts: rockchip: add usb nodes for rv1108 SoCs
  dt-bindings: update grf-binding for rv1108 SoCs
  ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
  ...

Pull ARM SoC driver updates from Olof Johansson:
 "This branch contains platform-related driver updates for ARM and ARM64.

  Among them:

   - Reset driver updates:
     + New API for dealing with arrays of resets
     + Make unimplemented {de,}assert return success on shared resets
     + MSDKv1 driver
     + Removal of obsolete Gemini reset driver
     + Misc updates for sunxi and Uniphier

   - SoC drivers:
     + Platform SoC driver registration on Tegra
     + Shuffle of Qualcomm drivers into a submenu
     + Allwinner A64 support for SRAM
     + Renesas R-Car R3 support
     + Power domains for Rockchip RK3366

   - Misc updates and smaller fixes for TEE and memory driver
     subsystems"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set
  soc/tegra: fuse: Add missing semi-colon
  soc/tegra: Restrict SoC device registration to Tegra
  drivers: soc: sunxi: add support for A64 and its SRAM C
  drivers: soc: sunxi: add support for remapping func value to reg value
  drivers: soc: sunxi: fix error processing on base address when claiming
  dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C
  bus: sunxi-rsb: Enable by default for ARM64
  soc/tegra: Register SoC device
  firmware: tegra: set drvdata earlier
  memory: Convert to using %pOF instead of full_name
  soc: Convert to using %pOF instead of full_name
  bus: Convert to using %pOF instead of full_name
  firmware: Convert to using %pOF instead of full_name
  soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC
  soc: mediatek: add header files required for MT7622 SCPSYS dt-binding
  soc: mediatek: reduce code duplication of scpsys_probe across all SoCs
  dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC
  reset: uniphier: add analog amplifiers reset control
  reset: uniphier: add video input subsystem reset control
  ...

Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch
  contains platform updates for 32- and 64-bit ARM, including defconfig
  updates to enable new options, drivers and platforms. There are also a
  few fixes and cleanups for some existing vendors.

  Some of the things worth highlighting here are:

   - Enabling new crypt drivers on arm64 defconfig

   - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig

   - Debug support enabled for Renesas r8a7743

   - Various config updates for Renesas platforms (sound, USB, other
     drivers)

   - Platform support (including SMP) for TI dra762

   - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale
     DMA code"

* tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits)
  ARM: multi_v7_defconfig: make eSDHC driver built-in
  arm64: defconfig: enable rockchip graphics
  MAINTAINERS: Update Cavium ThunderX2 entry
  ARM: config: aspeed: Add I2C, VUART, LPC Snoop
  ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G
  ARM: s3c24xx: Fix NAND ECC mode for mini2440 board
  ARM: davinci_all_defconfig: enable tinydrm and ST7586
  arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
  ARM: defconfig: tegra: Enable ChipIdea UDC driver
  ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
  ARM: tegra: Add Tegra I2S interfaces to defconfig
  ARM: tegra: Update default configuration for v4.13-rc1
  MAINTAINERS: update ARM/ZTE entry
  soc: versatile: remove unnecessary static in realview_soc_probe()
  ARM: Convert to using %pOF instead of full_name
  ARM: hisi: Fix typo in comment
  ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
  arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
  arm64: defconfig: add recently added crypto drivers as modules
  arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG
  ...

Pull sparc updates from David Miller:

 1) Use register window state adjustment instructions when available,
    from Anthony Yznaga.

 2) Add VCC console concentrator driver, from Jag Raman.

 3) Add 16GB hugepage support, from Nitin Gupta.

 4) Support cpu 'poke' hypercall, from Vijay Kumar.

 5) Add M7/M8 optimized memcpy/memset/copy_{to,from}_user, from Babu
    Moger.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: (33 commits)
  sparc64: Handle additional cases of no fault loads
  sparc64: speed up etrap/rtrap on NG2 and later processors
  sparc64: vcc: make ktermios const
  sparc: leon: grpci1: constify of_device_id
  sparc: leon: grpci2: constify of_device_id
  sparc64: vcc: Check for IS_ERR() instead of NULL
  sparc64: Cleanup hugepage table walk functions
  sparc64: Add 16GB hugepage support
  sparc64: Support huge PUD case in get_user_pages
  sparc64: vcc: Add install & cleanup TTY operations
  sparc64: vcc: Add break_ctl TTY operation
  sparc64: vcc: Add chars_in_buffer TTY operation
  sparc64: vcc: Add write & write_room TTY operations
  sparc64: vcc: Add hangup TTY operation
  sparc64: vcc: Add open & close TTY operations
  sparc64: vcc: Enable LDC event processing engine
  sparc64: vcc: Add RX & TX timer for delayed LDC operation
  sparc64: vcc: Create sysfs attribute group
  sparc64: vcc: Enable VCC port probe and removal
  sparc64: vcc: TTY driver initialization and cleanup
  ...

With gcc 4.1.2:

    include/linux/swapops.h: In function ‘swp_entry_to_pmd’:
    include/linux/swapops.h:294: warning: missing braces around initializer
    include/linux/swapops.h:294: warning: (near initialization for ‘(anonymous).pmd’)

Due to a GCC zero initializer bug (#53119), the standard "(pmd_t){ 0 }"
initializer is not accepted by all GCC versions.
In addition, on m68k pmd_t is an array instead of a single value, so we
need "(pmd_t){ { 0 }, }" instead of "(pmd_t){ 0 }".

Based on commit 9157259d ("mm: add pmd_t initializer __pmd() to
work around a GCC bug.") for sparc32.

Fixes: 616b8371 ("mm: thp: enable thp migration in generic path")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I've been staring at the word PCID too long.

Fixes: f13c8e8c58ba ("x86/mm: Reinitialize TLB state on hotplug and resume")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Load instructions using ASI_PNF or other no-fault ASIs should not
cause a SIGSEGV or SIGBUS.

A garden variety unmapped address follows the TSB miss path, and when
no valid mapping is found in the process page tables, the miss handler
checks to see if the access was via a no-fault ASI.  It then fixes up
the target register with a zero, and skips the no-fault load
instruction.

But different paths are taken for data access exceptions and alignment
traps, and these do not respect the no-fault ASI. We add checks in
these paths for the no-fault ASI, and fix up the target register and
TPC just like in the TSB miss case.
Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

For many sun4v processor types, reading or writing a privileged register
has a latency of 40 to 70 cycles.  Use a combination of the low-latency
allclean, otherw, normalw, and nop instructions in etrap and rtrap to
replace 2 rdpr and 5 wrpr instructions and improve etrap/rtrap
performance.  allclean, otherw, and normalw are available on NG2 and
later processors.

The average ticks to execute the flush windows trap ("ta 0x3") with and
without this patch on select platforms:

 CPU            Not patched     Patched    % Latency Reduction

 NG2            1762            1558            -11.58
 NG4            3619            3204            -11.47
 M7             3015            2624            -12.97
 SPARC64-X      829             770              -7.12
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Validate the output buffer length for L2CAP config requests and responses
to avoid overflowing the stack buffer used for building the option blocks.

Cc: stable@vger.kernel.org
Signed-off-by: Ben Seri <ben@armis.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull IOMMU updates from Joerg Roedel:
 "Slightly more changes than usual this time:

   - KDump Kernel IOMMU take-over code for AMD IOMMU. The code now tries
     to preserve the mappings of the kernel so that master aborts for
     devices are avoided. Master aborts cause some devices to fail in
     the kdump kernel, so this code makes the dump more likely to
     succeed when AMD IOMMU is enabled.

   - common flush queue implementation for IOVA code users. The code is
     still optional, but AMD and Intel IOMMU drivers had their own
     implementation which is now unified.

   - finish support for iommu-groups. All drivers implement this feature
     now so that IOMMU core code can rely on it.

   - finish support for 'struct iommu_device' in iommu drivers. All
     drivers now use the interface.

   - new functions in the IOMMU-API for explicit IO/TLB flushing. This
     will help to reduce the number of IO/TLB flushes when IOMMU drivers
     support this interface.

   - support for mt2712 in the Mediatek IOMMU driver

   - new IOMMU driver for QCOM hardware

   - system PM support for ARM-SMMU

   - shutdown method for ARM-SMMU-v3

   - some constification patches

   - various other small improvements and fixes"

* tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits)
  iommu/vt-d: Don't be too aggressive when clearing one context entry
  iommu: Introduce Interface for IOMMU TLB Flushing
  iommu/s390: Constify iommu_ops
  iommu/vt-d: Avoid calling virt_to_phys() on null pointer
  iommu/vt-d: IOMMU Page Request needs to check if address is canonical.
  arm/tegra: Call bus_set_iommu() after iommu_device_register()
  iommu/exynos: Constify iommu_ops
  iommu/ipmmu-vmsa: Make ipmmu_gather_ops const
  iommu/ipmmu-vmsa: Rereserving a free context before setting up a pagetable
  iommu/amd: Rename a few flush functions
  iommu/amd: Check if domain is NULL in get_domain() and return -EBUSY
  iommu/mediatek: Fix a build warning of BIT(32) in ARM
  iommu/mediatek: Fix a build fail of m4u_type
  iommu: qcom: annotate PM functions as __maybe_unused
  iommu/pamu: Fix PAMU boot crash
  memory: mtk-smi: Degrade SMI init to module_init
  iommu/mediatek: Enlarge the validate PA range for 4GB mode
  iommu/mediatek: Disable iommu clock when system suspend
  iommu/mediatek: Move pgtable allocation into domain_alloc
  iommu/mediatek: Merge 2 M4U HWs into one iommu domain
  ...

Pull MTD updates from Boris Brezillon:
 "General updates:
   - Constify pci_device_id in various drivers
   - Constify device_type
   - Remove pad control code from the Gemini driver
   - Use %pOF to print OF node full_name
   - Various fixes in the physmap_of driver
   - Remove unused vars in mtdswap
   - Check devm_kzalloc() return value in the spear_smi driver
   - Check clk_prepare_enable() return code in the st_spi_fsm driver
   - Create per MTD device debugfs enties

  NAND updates, from Boris Brezillon:
   - Fix memory leaks in the core
   - Remove unused NAND locking support
   - Rename nand.h into rawnand.h (preparing support for spi NANDs)
   - Use NAND_MAX_ID_LEN where appropriate
   - Fix support for 20nm Hynix chips
   - Fix support for Samsung and Hynix SLC NANDs
   - Various cleanup, improvements and fixes in the qcom driver
   - Fixes for bugs detected by various static code analysis tools
   - Fix mxc ooblayout definition
   - Add a new part_parsers to tmio and sharpsl platform data in order
     to define a custom list of partition parsers
   - Request the reset line in exclusive mode in the sunxi driver
   - Fix a build error in the orion-nand driver when compiled for ARMv4
   - Allow 64-bit mvebu platforms to select the PXA3XX driver

  SPI NOR updates, from Cyrille Pitchen and Marek Vasut:
   - add support to the JEDEC JESD216B specification (SFDP tables).
   - add support to the Intel Denverton SPI flash controller.
   - fix error recovery for Spansion/Cypress SPI NOR memories.
   - fix 4-byte address management for the Aspeed SPI controller.
   - add support to some Microchip SST26 memory parts
   - remove unneeded pinctrl header Write a message for tag:"

* tag 'for-linus-20170904' of git://git.infradead.org/linux-mtd: (74 commits)
  mtd: nand: complain loudly when chip->bits_per_cell is not correctly initialized
  mtd: nand: make Samsung SLC NAND usable again
  mtd: nand: tmio: Register partitions using the parsers
  mfd: tmio: Add partition parsers platform data
  mtd: nand: sharpsl: Register partitions using the parsers
  mtd: nand: sharpsl: Add partition parsers platform data
  mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller
  mtd: nand: qcom: support for IPQ4019 QPIC NAND controller
  dt-bindings: qcom_nandc: IPQ8074 QPIC NAND documentation
  dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation
  dt-bindings: qcom_nandc: fix the ipq806x device tree example
  mtd: nand: qcom: support for different DEV_CMD register offsets
  mtd: nand: qcom: QPIC data descriptors handling
  mtd: nand: qcom: enable BAM or ADM mode
  mtd: nand: qcom: erased codeword detection configuration
  mtd: nand: qcom: support for read location registers
  mtd: nand: qcom: support for passing flags in DMA helper functions
  mtd: nand: qcom: add BAM DMA descriptor handling
  mtd: nand: qcom: allocate BAM transaction
  mtd: nand: qcom: DMA mapping support for register read buffer
  ...

Pull power supply and reset changes from Sebastian Reichel:
 "New chip/feature support:
   - bq27xxx: support updating battery config from DT
   - bq24190: support loading battery charge info from DT
   - LTC2941: add LTC2942/LTC2944 support
   - max17042: add ACPI support
   - max1721x: new driver

  Misc:
   - Move bq27xxx w1 driver from w1 into power-supply subsystem
   - Introduce power_supply_set_input_current_limit_from_supplier
   - constify stuff
   - some minor fixes"

* tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits)
  power: supply: bq27xxx: enable writing capacity values for bq27421
  power: supply: bq24190_charger: Get input_current_limit from our supplier
  power: supply: bq24190_charger: Export 5V boost converter as regulator
  power: supply: bq24190_charger: Add power_supply_battery_info support
  power: supply: bq24190_charger: Add property system-minimum-microvolt
  power: supply: bq24190_charger: Enable devicetree config
  dt-bindings: power: supply: Add docs for TI BQ24190 battery charger
  power: supply: bq27xxx: Remove duplicate chip data arrays
  power: supply: bq27xxx: Enable data memory update for certain chips
  power: supply: bq27xxx: Add chip IDs for previously shadowed chips
  power: supply: bq27xxx: Create single chip data table
  power: supply: bq24190_charger: Add ti,bq24192i to devicetree table
  power: supply: bq24190_charger: Add input_current_limit property
  power: supply: Add power_supply_set_input_current_limit_from_supplier helper
  power: supply: max17042_battery: Fix compiler warning
  power: supply: core: Delete two error messages for a failed memory allocation in power_supply_check_supplies()
  power: supply: make device_attribute const
  power: supply: max17042_battery: Fix ACPI interrupt issues
  power: supply: max17042_battery: Add support for ACPI enumeration
  power: supply: lp8788: Make several arrays static const * const
  ...

Pull rpmsg updates from Bjorn Andersson:
 "This extends the Qualcomm GLINK implementation to support the
  additional features used for communicating with modem and DSP
  coprocessors in modern Qualcomm platforms.

  In addition to this there's support for placing virtio RPMSG buffers
  in non-System RAM"

* tag 'rpmsg-v4.14' of git://github.com/andersson/remoteproc: (29 commits)
  rpmsg: glink: initialize ret to zero to ensure error status check is correct
  rpmsg: glink: fix null pointer dereference on a null intent
  dt-bindings: soc: qcom: Extend GLINK to cover SMEM
  remoteproc: qcom: adsp: Allow defining GLINK edge
  rpmsg: glink: Export symbols from common code
  rpmsg: glink: Release idr lock before returning on error
  rpmsg: glink: Handle remote rx done command
  rpmsg: glink: Request for intents when unavailable
  rpmsg: glink: Use the intents passed by remote
  rpmsg: glink: Receive and store the remote intent buffers
  rpmsg: glink: Add announce_create ops and preallocate intents
  rpmsg: glink: Add rx done command
  rpmsg: glink: Make RX FIFO peak accessor to take an offset
  rpmsg: glink: Use the local intents when receiving data
  rpmsg: glink: Add support for TX intents
  rpmsg: glink: Fix idr_lock from mutex to spinlock
  rpmsg: glink: Add support for transport version negotiation
  rpmsg: glink: Introduce glink smem based transport
  rpmsg: glink: Do a mbox_free_channel in remove
  rpmsg: glink: Return -EAGAIN when there is no FIFO space
  ...

Pull remoteproc updates from Bjorn Andersson:
 "This adds and improves remoteproc support for TI DA8xx/OMAP-L13x DSP,
  TI Keystone 66AK2G DSP and iMX6SX/7D Cortex M4 coprocessors. It
  introduces the Qualcomm restart notifier and a few fixes"

* tag 'rproc-v4.14' of git://github.com/andersson/remoteproc:
  remoteproc: Introduce rproc handle accessor for children
  remoteproc: qcom: Make ssr_notifiers local
  remoteproc: Stop subdevices in reverse order
  remoteproc: imx_rproc: add a NXP/Freescale imx_rproc driver
  remoteproc: dt: Provide bindings for iMX6SX/7D Remote Processor Controller driver
  remoteproc: qcom: Use PTR_ERR_OR_ZERO
  remoteproc: st: explicitly request exclusive reset control
  remoteproc: qcom: explicitly request exclusive reset control
  remoteproc/keystone: explicitly request exclusive reset control
  remoteproc/keystone: Add support for Keystone 66AK2G SOCs
  remoteproc/davinci: Add device tree support for OMAP-L138 DSP
  dt-bindings: remoteproc: Add bindings for Davinci DSP processors
  remoteproc/davinci: Add support to parse internal memories
  remoteproc/davinci: Switch to platform_get_resource_byname()
  remoteproc: make device_type const
  soc: qcom: GLINK SSR notifier
  remoteproc: qcom: Add support for SSR notifications
  remoteproc: Merge __rproc_boot() with rproc_boot()

Pull VFIO updates from Alex Williamson:

 - Base MSI remapping on either IOMMU domain or IRQ domain support
   (Robin Murphy)

 - Prioritize hardware MSI regions over software defined regions (Robin
   Murphy)

 - Fix no-iommu reference counting (Eric Auger)

 - Stall removing last device from group for container cleanup (Alex
   Williamson)

 - Constify amba_id (Arvind Yadav)

* tag 'vfio-v4.14-rc1' of git://github.com/awilliam/linux-vfio:
  vfio: platform: constify amba_id
  vfio: Stall vfio_del_group_dev() for container group detach
  vfio: fix noiommu vfio_iommu_group_get reference count
  vfio/type1: Give hardware MSI regions precedence
  vfio/type1: Cope with hardware MSI reserved regions

Pull i2c updates from Wolfram Sang:

 - new drivers for Spreadtrum I2C, Intel Cherry Trail Whiskey Cove SMBUS

 - quite some driver updates

 - cleanups for the i2c-mux subsystem

 - some subsystem-wide constification

 - further cleanup of include/linux/i2c

* 'i2c/for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
  i2c: sprd: Fix undefined reference errors
  i2c: nomadik: constify amba_id
  i2c: versatile: Make i2c_algo_bit_data const
  i2c: busses: make i2c_adapter_quirks const
  i2c: busses: make i2c_adapter const
  i2c: busses: make i2c_algorithm const
  i2c: Add Spreadtrum I2C controller driver
  dt-bindings: i2c: Add Spreadtrum I2C controller documentation
  i2c-cht-wc: make cht_wc_i2c_adap_driver static
  MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c
  i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
  dt-bindings: i2c: eeprom: Document vendor to be used and deprecated ones
  i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
  MAINTAINERS: drop entry for Blackfin I2C and Sonic's email
  blackfin: merge the two TWI header files
  i2c: davinci: Preserve return value of devm_clk_get
  i2c: mediatek: Add i2c compatible for MediaTek MT7622
  dt-bindings: i2c: Add MediaTek MT7622 i2c binding
  dt-bindings: i2c: modify information formats
  i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support
  ...

If we skip a subrequest due to a zero refcount, we should still count
the byte range that it covered so that we accurately reconstruct the
original request size.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Pull nfsd updates from Bruce Fields:
 "More RDMA work and some op-structure constification from Chuck Lever,
  and a small cleanup to our xdr encoding"

* tag 'nfsd-4.14' of git://linux-nfs.org/~bfields/linux:
  svcrdma: Estimate Send Queue depth properly
  rdma core: Add rdma_rw_mr_payload()
  svcrdma: Limit RQ depth
  svcrdma: Populate tail iovec when receiving
  nfsd: Incoming xdr_bufs may have content in tail buffer
  svcrdma: Clean up svc_rdma_build_read_chunk()
  sunrpc: Const-ify struct sv_serv_ops
  nfsd: Const-ify NFSv4 encoding and decoding ops arrays
  sunrpc: Const-ify instances of struct svc_xprt_ops
  nfsd4: individual encoders no longer see error cases
  nfsd4: skip encoder in trivial error cases
  nfsd4: define ->op_release for compound ops
  nfsd4: opdesc will be useful outside nfs4proc.c
  nfsd4: move some nfsd4 op definitions to xdr4.h

Pull btrfs updates from David Sterba:
 "The changes range through all types: cleanups, core chagnes, sanity
  checks, fixes, other user visible changes, detailed list below:

   - deprecated: user transaction ioctl

   - mount option ssd does not change allocation alignments

   - degraded read-write mount is allowed if all the raid profile
     constraints are met, now based on more accurate check

   - defrag: do not reset compression afterwards; the NOCOMPRESS flag
     can be now overriden by defrag

   - prep work for better extent reference tracking (related to the
     qgroup slowness with balance)

   - prep work for compression heuristics

   - memory allocation reductions (may help latencies on a loaded
     system)

   - better accounting for io waiting states

   - error handling improvements (removed BUGs)

   - added more sanity checks for shared refs

   - fix readdir vs pagefault deadlock under some circumstances

   - fix for 'no-hole' mode, certain combination of compressed and
     inline extents

   - send: fix emission of invalid clone operations

   - fixup file mode if setting acls fail

   - more fixes from fuzzing

   - oher cleanups"

* 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (104 commits)
  btrfs: submit superblock io with REQ_META and REQ_PRIO
  btrfs: remove unnecessary memory barrier in btrfs_direct_IO
  btrfs: remove superfluous chunk_tree argument from btrfs_alloc_dev_extent
  btrfs: Remove chunk_objectid parameter of btrfs_alloc_dev_extent
  btrfs: pass fs_info to btrfs_del_root instead of tree_root
  Btrfs: add one more sanity check for shared ref type
  Btrfs: remove BUG_ON in __add_tree_block
  Btrfs: remove BUG() in add_data_reference
  Btrfs: remove BUG() in print_extent_item
  Btrfs: remove BUG() in btrfs_extent_inline_ref_size
  Btrfs: convert to use btrfs_get_extent_inline_ref_type
  Btrfs: add a helper to retrive extent inline ref type
  btrfs: scrub: simplify scrub worker initialization
  btrfs: scrub: clean up division in scrub_find_csum
  btrfs: scrub: clean up division in __scrub_mark_bitmap
  btrfs: scrub: use bool for flush_all_writes
  btrfs: preserve i_mode if __btrfs_set_acl() fails
  btrfs: Remove extraneous chunk_objectid variable
  btrfs: Remove chunk_objectid argument from btrfs_make_block_group
  btrfs: Remove extra parentheses from condition in copy_items()
  ...