- 12 Feb, 2018 36 commits
-
-
Benoît Thébaudeau authored
The eSDHC does not work properly if the SION bit is not set for the bidirectional CMD signal, whatever the eSDHC instance and the selected pad. Therefore, setting SION is mandatory for all eSDHC CMD ports. Do this for MX25_PAD_*__ESDHCn_CMD in imx25-pinfunc.h in order to enforce this behavior for all boards. This had already been done for eSDHC1, but not for eSDHC2. Also, define MX25_PAD_FEC_MDC__ESDHC2_CMD so that all the possible cases are covered from now on. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Benoît Thébaudeau authored
This file had several naming inconsistencies for eSDHC: - the instances were named sometimes SDn, sometimes SDHCn, whereas they are named ESDHCn in the reference manual, e.g.: MX25_PAD_SD1_CMD__SD1_CMD MX25_PAD_D15__SDHC1_DAT7 - the data ports were named sometimes DATAn, sometimes DATn like in the reference manual, e.g.: MX25_PAD_SD1_DATA0__SD1_DATA0 MX25_PAD_D15__SDHC1_DAT7 - in one case, the clock port was named DAT_CLK instead of CLK: MX25_PAD_CSI_D7__SDHC2_DAT_CLK This change: - introduces new definitions using the naming from the reference manual, - keeps definitions using the legacy naming in order not to break compatibility for out-of-tree users (they can be removed later), - updates the in-tree files that were using the legacy naming. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Bartosz Golaszewski authored
Using 'at24' as fallback is now deprecated - use the full 'atmel,<model>' string. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Bartosz Golaszewski authored
Using 'at' as the <manufacturer> part of the compatible string is now deprecated. Use a correct string: 'atmel,<model>'. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Bartosz Golaszewski authored
Using 'at' as the <manufacturer> part of the compatible string is now deprecated. Use a correct string: 'atmel,<model>'. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Marco Franchi authored
Fix the following warnings from dtc by adding the unit name to memory nodes: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Converted using the following command: perl -p0777i -e 's/memory \{\n\t\treg = \<0x+([0-9a-f])/memory\@$1$\0000000 \{\n\t\treg = <0x$1/m' `find ./arch/arm/boot/dts -name "imx*"` The files below were manually fixed: -imx1-ads.dts -imx1-apf9328.dts -imx6q-pistachio.dts Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Marco Franchi authored
Remove the empty reg property from the SoC dtsi files in order to avoid duplicate memory nodes when the correct size is passed in board dts files. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Marco Franchi authored
In preparation for removing 'reg = <0 0>;' from the dtsi SoC files, pass 'reg = <0 0 >;' to the dts/dtsi board files that do not pass the memory size. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Anson Huang authored
Add ARM power domain in PGC. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Anson Huang authored
Add PU power domain support, GPU is the only module inside PU power domain, and PU power is supplied by LDO_SOC. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Ryan Harkin authored
This patch configures the board to output UART6 to the mikroBus. The NXP WaRP7 board can route UART6 to the mikroBus, where an RS232 click board can be plugged in to get an additional serial port. Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Ian Ray authored
Default boot medium must be internal eMMC, we don't want the SDIO to be used for these devices. This commit disables the SD card interface for GE Healthcare Bx50v3 devices. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Sebastian Reichel authored
PPD uses the PMIC's TSI pins in general purpose ADC mode. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Martyn Welch authored
Utilise new support in Atmel MaxTouch driver to drive the touchscreen controllers reset line correctly. Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Stefan Agner authored
In i.MX 6ULL UART8 is part of the AIPS-3 memory map instead of AIPS-1. Clocks and interrupts remain the same. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Stefan Agner authored
The i.MX 6ULL features another IOMUX Controller called IOMUXC SNVS which allows to control BOOT_MODE and TAMPER pins. Add the controller to the i.MX 6ULL specific imx6ull.dtsi device tree. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Stefan Agner authored
Add per-core ARM architected timer. Unfortunately bootloaders (U-Boot) currently do not make the necessary initialization. Also specifing the clock manually using the clock-frequency property seems not to help. Therefor leave the timer disabled by default for now. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Stefan Agner authored
The Cortex-A7 and its GIC support virtualization extensions. To make use of them the CPU private interrupt needs to be specified. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Bai Ping authored
On i.MX 6ULL, the pin MUX and CTRL register of BOOT_MODEx and TAMPERx pins are available through IOMUXC_SNVS. Add additional pinfunc defines. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fugang Duan authored
Add previously missing daisy chain configurations and several additional pinmux options. Synchronized with NXP Linux 4.9.11_1.0.0 release. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Enrico Scholz authored
Add support for the PHYTEC phyBOARD-Mira with i.MX 6QuadPlus with NAND. It is based on the phyBOARD-Mira with i.MX 6Quad/Dual and supports the same interfaces. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de> Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Christian Hemp authored
Add support for the PHYTEC phyBOARD-Mira Low-Cost Rapid Development Kit with i.MX 6DualLight/Solo with NAND. Following interfaces are supported: - 100 MBit Ethernet - USB Host - RS232 - HDMI Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Christian Hemp authored
Add support for the PHYTEC phyBOARD-Mira Rapid Development Kit with i.MX 6Quad/Dual with eMMC or NAND. Following interfaces are supported: - Gigabit Ethernet - USB Host - CAN - RS232 - PCIe - LVDS - HDMI Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Stefan Riedmueller authored
This patch adds basic support for PHYTEC phyBOARD-Mira as carrier board for PHYTEC phyCORE-i.MX 6. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Stefan Riedmueller authored
This patch adds basic support for PHYTEC phyCORE-i.MX 6 SOM with i.MX 6Quad/Dual or i.MX 6DualLight/Solo. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Christ <s.christ@phytec.de> Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Marco Franchi authored
The i.MX 7D SDB has a MPL3115 Pressure sensor. Add support for this sensor, which is included in the trivial i2c devices and according to the bindings documentation, just need a compatible field and an address. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Marco Franchi authored
The i.MX 6UL EVK has a MAG3110 Magnetometer sensor in its base board. Add support for this sensor, which is included in the trivial i2c devices and according to the bindings documentation, just need a compatible field and an address. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Lucas Stach authored
The system has an external watchdog in the environment processor so the internal watchdog is of no use. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: cphealy@gmail.com Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Anson Huang authored
Remove unnecessary clocks for cpu-freq driver to avoid confusion. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
ads7846 is connected to SPI chip select 0, so pass the unit address accordingly to fix the following build warning with W=1: arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dtb: Warning (unit_address_vs_reg): Node /soc/aipi@10000000/cspi@1000e000/ads7846 has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Move i2cmux node from soc node to root node. i2cmux node does not have any register properties and thus shouldn't be placed on the bus. This fixes the following build warnings with W=1: arch/arm/boot/dts/imx28-cfa10049.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbx@80040000/i2cmux missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Pass unit address and reg to IOMUX node to fix the following build warning with W=1: arch/arm/boot/dts/imx28-apx4devkit.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/mmc2-sck-cfg-apx4 missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Pass unit address and reg to IOMUX node to fix the following build warning with W=1: arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-edt-ft5x06-pins missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-flexcan-xcvr-pins missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-lcdif-23bit missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-lcdif-ctrl missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-mac0-gpio-pins missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-pca9554-pins missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/spi-gpiogrp missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-tsc2007-pins missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-usbphy0-pins missing or empty reg/ranges property arch/arm/boot/dts/imx28-tx28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/tx28-usbphy1-pins missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-By: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Pass unit address and reg to IOMUX node to fix the following build warning with W=1: arch/arm/boot/dts/imx28-apf28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/gpmi-status-cfg missing or empty reg/ranges property arch/arm/boot/dts/imx28-apf28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/mmc0-cd-cfg missing or empty reg/ranges property arch/arm/boot/dts/imx28-apf28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/mmc0-sck-cfg missing or empty reg/ranges property arch/arm/boot/dts/imx28-apf28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/mmc1-cd-cfg missing or empty reg/ranges property arch/arm/boot/dts/imx28-apf28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/mmc1-sck-cfg missing or empty reg/ranges property arch/arm/boot/dts/imx28-apf28.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/mmc2-cd-cfg missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
Pass unit address and reg to IOMUX node to fix the following build warning with W=1: arch/arm/boot/dts/imx23-evk.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/gpmi-pins-fixup missing or empty reg/ranges property arch/arm/boot/dts/imx23-evk.dtb: Warning (simple_bus_reg): Node /apb@80000000/apbh@80000000/pinctrl@80018000/mmc0-pins-fixup missing or empty reg/ranges property Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Rasmus Villemoes authored
Although the two nodes constitute one contiguous 128K region, still describe them separately: - That's how they are described in the reference manual: "Each OCRAM occupies a 64 KB of address region...", and the names ocram1 and ocram2 are also as used in the manual. - The two areas are treated differently by the boot ROM code: OCRAM2 is zero-initialized, while, again quoting the RM, "software must perform the zero initialization of OCRAM1." Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 11 Feb, 2018 4 commits
-
-
Linus Torvalds authored
-
Al Viro authored
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations
-