- 05 Dec, 2018 28 commits
-
-
Bingbu Cao authored
Some Sony camera sensors have same test pattern definitions, this patch unify the pattern naming to make it more clear to the userspace. Suggested-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Bingbu Cao authored
current imx355 test pattern order in ctrl menu is not correct, this patch fixes it. Signed-off-by:
-
Bingbu Cao authored
current imx319 test pattern order in ctrl menu is not correct, this patch fixes it. Signed-off-by:
-
Fabio Estevam authored
On a imx6q-wandboard the following warnings are observed: [ 4.327794] video-mux 20e0000.iomuxc-gpr:ipu1_csi0_mux: bad remote port parent [ 4.336118] video-mux 20e0000.iomuxc-gpr:ipu2_csi1_mux: bad remote port parent As explained by Philipp Zabel: "There are empty endpoint nodes (without remote-endpoint property) labeled ipu1_csi[01]_mux_from_parallel_sensor in the i.MX6 device trees for board DT implementers' convenience. See commit 2539f517 ("ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections")." So demote the warning to debug level and make the wording a bit less misleading. Suggested-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
Clang warns: drivers/media/firewire/firedtv-avc.c:999:45: warning: implicit conversion from 'int' to 'char' changes value from 159 to -97 [-Wconstant-conversion] app_info[0] = (EN50221_TAG_APP_INFO >> 16) & 0xff; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ drivers/media/firewire/firedtv-avc.c:1000:45: warning: implicit conversion from 'int' to 'char' changes value from 128 to -128 [-Wconstant-conversion] app_info[1] = (EN50221_TAG_APP_INFO >> 8) & 0xff; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ drivers/media/firewire/firedtv-avc.c:1040:44: warning: implicit conversion from 'int' to 'char' changes value from 159 to -97 [-Wconstant-conversion] app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ drivers/media/firewire/firedtv-avc.c:1041:44: warning: implicit conversion from 'int' to 'char' changes value from 128 to -128 [-Wconstant-conversion] app_info[1] = (EN50221_TAG_CA_INFO >> 8) & 0xff; ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~ 4 warnings generated. Change app_info's type to unsigned char to match the type of the member msg in struct ca_msg, which is the only thing passed into the app_info parameter in this function. Link: https://github.com/ClangBuiltLinux/linux/issues/105Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Christoph Hellwig authored
The DMA API does its own zone decisions based on the coherent_dma_mask. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
-
YueHaibing authored
Remove duplicated include. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
-
Andrey Abramov authored
Replaced i2c_driver::probe with i2c_driver::probe_new, because documentation says that probe method is "soon to be deprecated". Signed-off-by:
Andrey Abramov <st5pub@yandex.ru> Signed-off-by:
-
Mauro Carvalho Chehab authored
The io.h was still included twice. Having a large number of includes like that unsorted is likely the reason why we ended by having 3 includes of io.h and two includes of interrupt.h at the first place. So, let's reorder the includes on alphabetic order. That would make easier to maintain it. Fixes: 12645e06 ("media: ddbridge: remove some duplicated include file") Signed-off-by:
-
zhong jiang authored
interrupt.h and io.h have duplicated include. hence just remove redundant file. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
-
Marco Felsch authored
Commit 37c65802e76a ("media: tvp5150: Add sync lock interrupt handling") introduced the interrupt handling. But we have to free the v4l2_ctrl_handler before we can return the error code. Fixes: 37c65802e76a ("media: tvp5150: Add sync lock interrupt handling") Signed-off-by:Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
zhong jiang authored
module.h already contained moduleparam.h, so it is safe to remove the redundant include. The issue is detected with the help of Coccinelle. Signed-off-by:
-
Iliya Iliev authored
Fix error due to assignment in conditional expression. Fix errors due to absence of empty spaces separators after commas in function calls. Fix errors due to lines longer than 80 characters. Signed-off-by:
Iliya Iliev <iliyailiev3592@gmail.com> Signed-off-by:
-
Corentin Labbe authored
friio drivers is unused and un-compilable since commit b30cc07d ("media: dvb-usb/friio, dvb-usb-v2/gl861: decompose friio and merge with gl861"). Let's remove it. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Cc: Akihiro Tsukada <tskd2@yahoo.co.jp> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Malcolm Priestley authored
Use dvb-usb-v2 generic usb function for bulk transfers and simplify logic. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
lme2510_state exists for the entire duration of driver. Move usb_buffer to lme2510_state removing the need for lme2510_exit_int for removing the buffer. Signed-off-by:
-
Sean Young authored
Clang warns that 'interleaving' is assigned to itself in this function. drivers/media/dvb-frontends/dib7000p.c:1874:15: warning: explicitly assigning value of variable of type 'int' to itself [-Wself-assign] interleaving = interleaving; ~~~~~~~~~~~~ ^ ~~~~~~~~~~~~ 1 warning generated. Just remove the self-assign and leave existing code in place for now. Reported-by:Nick Desaulniers <ndesaulniers@google.com> Suggested-by:
-
Nikita Gerasimov authored
Since 2018 some new revisions of RTL2832P based devices having Sony CXD2837ER as a slave demodulator instead of Panasonic MN88473. CXD2837ER handled in DVB_CXD2841ER module but it's has a lack of control. So slave demod has to be reseted by GPIO0 before detecting to woke up CXD2837ER. Signed-off-by:
Nikita Gerasimov <nikitych@yandex.ru> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Kieran Bingham authored
A new iterator is available for processing UVC URB structures. This simplifies the processing of the internal stream data. Convert the manual loop iterators to the new helper, adding an index helper to keep the existing debug print. Signed-off-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by:
-
Kieran Bingham authored
We have both uvc_init_video() and uvc_video_init() calls which can be quite confusing to determine the process for each. Now that video uvc_video_enable() has been renamed to uvc_video_start_streaming(), adapt these calls to suit the new flow. Rename uvc_init_video() to uvc_video_start_transfer() and uvc_uninit_video() to uvc_video_stop_transfer(). Signed-off-by:
-
Kieran Bingham authored
uvc_video_enable() is used both to start and stop the video stream object, however the single function entry point shares no code between the two operations. Split the function into two distinct calls, and rename to uvc_video_start_streaming() and uvc_video_stop_streaming() as appropriate. Signed-off-by:
-
Kieran Bingham authored
Newer high definition cameras, and cameras with multiple lenses such as the range of stereo-vision cameras now available have ever increasing data rates. The inclusion of a variable length packet header in URB packets mean that we must memcpy the frame data out to our destination 'manually'. This can result in data rates of up to 2 gigabits per second being processed. To improve efficiency, and maximise throughput, handle the URB decode processing through a work queue to move it from interrupt context, and allow multiple processors to work on URBs in parallel. Signed-off-by:
-
Kieran Bingham authored
The streaming object is a key part of handling the UVC device. Although not critical, we are currently missing a call to destroy the mutex on clean up paths, and we are due to extend the objects complexity in the near future. Facilitate easy management of a stream object by creating a pair of functions to handle creating and destroying the allocation. The new uvc_stream_delete() function also performs the missing mutex_destroy() operation. Previously a failed streaming object allocation would cause uvc_parse_streaming() to return -EINVAL, which is inappropriate. If the constructor failes, we will instead return -ENOMEM. While we're here, fix the trivial spelling error in the function banner of uvc_delete(). Signed-off-by:
-
Kieran Bingham authored
The buffer queue interface currently operates sequentially, processing buffers after they have fully completed. In preparation for supporting parallel tasks operating on the buffers, we will need to support buffers being processed on multiple CPUs. Adapt the uvc_queue_next_buffer() such that a reference count tracks the active use of the buffer, returning the buffer to the VB2 stack at completion. Signed-off-by:
-
Kieran Bingham authored
Both uvc_start_streaming(), and uvc_stop_streaming() are called from userspace context, with interrupts enabled. As such, they do not need to save the IRQ state, and can use spin_lock_irq() and spin_unlock_irq() respectively. Signed-off-by:
-
Kieran Bingham authored
The URB completion operation obtains the current buffer by reading directly into the queue internal interface. Protect this queue abstraction by providing a helper uvc_queue_get_current_buffer() which can be used by both the decode task, and the uvc_queue_next_buffer() functions. Signed-off-by:
-
Kieran Bingham authored
The URB completion handlers currently reference the stream context. Now that each URB has its own context structure, convert the decode (and one encode) functions to utilise this context for URB management. Signed-off-by:
-
Kieran Bingham authored
We currently store three separate arrays for each URB reference we hold. Objectify the data needed to track URBs into a single uvc_urb structure, allowing better object management and tracking of the URB. All accesses to the data pointers through stream, are converted to use a uvc_urb pointer for consistency. Signed-off-by:
-
- 03 Dec, 2018 12 commits
-
-
Randy Dunlap authored
Fix build errors due to missing <linux/module.h> header file. The header file is inserted first because module-related errors begin showing up in <linux/acpi.h> (when CONFIG_ACPI is not set). Sample of build errors: In file included from ../include/linux/acpi.h:27:0, from ../drivers/media/platform/seco-cec/seco-cec.c:10: ../include/linux/device.h:1620:1: warning: data definition has no type or storage class [enabled by default] module_exit(__driver##_exit); ^ ../include/linux/platform_device.h:229:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^ ../drivers/media/platform/seco-cec/seco-cec.c:791:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(secocec_driver); ^ ../include/linux/device.h:1620:1: error: type defaults to 'int' in declaration of 'module_exit' [-Werror=implicit-int] module_exit(__driver##_exit); ^ ../include/linux/platform_device.h:229:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^ ../drivers/media/platform/seco-cec/seco-cec.c:791:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(secocec_driver); ^ In file included from ../include/linux/linkage.h:7:0, from ../include/linux/kernel.h:7, from ../include/linux/list.h:9, from ../include/linux/resource_ext.h:17, from ../include/linux/acpi.h:26, from ../drivers/media/platform/seco-cec/seco-cec.c:10: ../include/linux/export.h:18:30: warning: parameter names (without types) in function declaration [enabled by default] #define THIS_MODULE ((struct module *)0) ^ ../include/linux/platform_device.h:199:34: note: in expansion of macro 'THIS_MODULE' __platform_driver_register(drv, THIS_MODULE) ^ ../include/linux/device.h:1613:9: note: in expansion of macro 'platform_driver_register' return __register(&(__driver) , ##__VA_ARGS__); \ ^ ../include/linux/platform_device.h:229:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^ ../drivers/media/platform/seco-cec/seco-cec.c:791:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(secocec_driver); ^ ../drivers/media/platform/seco-cec/seco-cec.c:793:20: error: expected declaration specifiers or '...' before string constant MODULE_DESCRIPTION("SECO CEC X86 Driver"); ^ ../drivers/media/platform/seco-cec/seco-cec.c:794:15: error: expected declaration specifiers or '...' before string constant MODULE_AUTHOR("Ettore Chimenti <ek5.chimenti@gmail.com>"); ^ ../drivers/media/platform/seco-cec/seco-cec.c:795:16: error: expected declaration specifiers or '...' before string constant MODULE_LICENSE("Dual BSD/GPL"); ^ In file included from ../include/linux/acpi.h:27:0, from ../drivers/media/platform/seco-cec/seco-cec.c:10: ../drivers/media/platform/seco-cec/seco-cec.c:791:24: warning: 'secocec_driver_init' defined but not used [-Wunused-function] module_platform_driver(secocec_driver); ^ ../include/linux/device.h:1611:19: note: in definition of macro 'module_driver' static int __init __driver##_init(void) \ ^ ../drivers/media/platform/seco-cec/seco-cec.c:791:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(secocec_driver); Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Cc: Ettore Chimenti <ek5.chimenti@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
With the GREY format at the beginning, the default format selected by vicodec would be GREY instead of YUV420. That didn't make sense, so move it to the end of the list. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in the module description as well as a comment. Fix them. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Hans Verkuil authored
Add a new vivid button control to inject an error into the req_validate request callback. This will help testing with v4l2-compliance. Signed-off-by:
-
Jasmin Jessich authored
On older Kernels (prior to 4.15) irqreturn_t and devm_request_threaded_irq is not defined when compiling adv7604.c. It seems more recent Kernels include it via another header which is included by adv7604.c. Now we include linux/interrupt.h explicitly to get the type also defined for Kernels prior to 4.15. Signed-off-by:
Jasmin Jessich <jasmin@anw.at> Signed-off-by:
-
Michael Tretter authored
Commit 0185f850 ("[media] samples: v4l: from Documentation to samples directory") moved the v4l2-pci-skeleton driver to the samples directory. The samples are only be built, if CONFIG_SAMPLES is enabled. Therefore, VIDEO_PCI_SKELETON is not enough to build the v4l2-pci-skeleton driver, but SAMPLES needs to be enabled, too. Let VIDEO_PCI_SKELETON depend on SAMPLES. Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Signed-off-by:
-
Michael Tretter authored
Commit 2d700715 ("[media] media: videobuf2: Restructure vb2_buffer") replaced vb2_buffer with vb2_v4l2_buffer in all v4l2 drivers. The restructuring skipped the v4l2-pci-skeleton, probably because it resides outside the drivers directory. The v4l2_buf_ops assume that the passed buffer is a vb2_v4l2_buffer. This is not the case if the skel_buffer is based on vb2_buffer instead of vb2_v4l2_buffer. Replace vb2_buffer with vb2_v4l2_buffer in the skeleton to make sure that future drivers that are based on the skeleton use vb2_v4l2_buffer. Signed-off-by:
-
Sakari Ailus authored
The v4l_fill_fmtdesc() function does a good job in filling in pixelformat description. While generally all drivers should depend on this function doing the job, staging drivers that use their own formats may not. Allow staging drivers to fill in their own formats by checking whether the description begins with a non-nil character before issuing the warning. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Jonas Karlman authored
intra_dc_precision is a 2-bit integer [1] allow use of all valid options, 8 - 11 bits precision [1] ISO/IEC 13818-2 Table 6-13 Fixes: c27bb30e ("media: v4l: Add definitions for MPEG-2 slice format and metadata") Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Acked-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Alexey Khoroshilov authored
If vpbe_set_default_output() or vpbe_set_default_mode() fails, vpbe_initialize() returns error code without releasing resources. The patch adds error handling for that case. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Hans Verkuil authored
Reorganize code to fix two smatch warnings: drivers/media/platform/vivid/vivid-core.c: drivers/media/platform/vivid/vivid-core.c:889 vivid_create_instance() warn: potentially one past the end of array 'dev->query_dv_timings_qmenu[dev->query_dv_timings_size]' drivers/media/platform/vivid/vivid-core.c: drivers/media/platform/vivid/vivid-core.c:889 vivid_create_instance() warn: potentially one past the end of array 'dev->query_dv_timings_qmenu[dev->query_dv_timings_size]' Signed-off-by:
-
Tomasz Figa authored
The encoder driver has no need to do any CPU access to the source frame buffers. Use a separate structure for holding DMA addresses and sizes for those and remove, so we do not end up introducing any erroneous dereferences of those VAs. This fixes DMA-buf import from exporters that do not provide contiguous kernel mappings, which includes the MTK DRM driver. Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
