In order to run a certain command inside another network namespace, it's
possible to use "ip netns exec ns command". However then one can't use
functions defined in lib.sh or a test suite.

One option is to do "ip netns exec ns bash -c command", provided that
all functions that one wishes to use (and their dependencies) are
published using "export -f". That may not be practical.

Therefore, introduce a helper in_ns(), which wraps a given command in a
boilerplate of "ip netns exec" and "source lib.sh", thus making all
library functions available. (Custom functions that a script wishes to
run within a namespace still need to be exported.)

Because quotes in "$@" aren't recognized in heredoc, hand-expand the
array in an explicit for loop, leveraging printf %q to handle proper
quoting.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

So far the case of NUM_NETIFS of 0 has not been interesting. However if
one wishes to reuse the lib.sh routines in a setup of a separate
namespace, being able to import like this is handy.

Therefore replace the {1..$NUM_NETIFS} references, which cause iteration
over 1 and 0, with an explicit for loop like we do in setup_wait() and
tc_offload_check(), so that for NUM_NETIFS of 0 no iteration is done.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a packet is trapped and the corresponding SKB marked as
already-forwarded, it retains this marking even after it is forwarded
across veth links into another bridge. There, since it ingresses the
bridge over veth, which doesn't have offload_fwd_mark, it triggers a
warning in nbp_switchdev_frame_mark().

Then nbp_switchdev_allowed_egress() decides not to allow egress from
this bridge through another veth, because the SKB is already marked, and
the mark (of 0) of course matches. Thus the packet is incorrectly
blocked.

Solve by resetting offload_fwd_mark() in skb_scrub_packet(). That
function is called from tunnels and also from veth, and thus catches the
cases where traffic is forwarded between bridges and transformed in a
way that invalidates the marking.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Suggested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sunil Goutham says:

====================
octeontx2-af: NPC MCAM support and FLR handling

This patchset is a continuation to earlier submitted three patch
series to add a new driver for Marvell's OcteonTX2 SOC's
Resource virtualization unit (RVU) admin function driver.

1. octeontx2-af: Add RVU Admin Function driver
   https://www.spinics.net/lists/netdev/msg528272.html
2. octeontx2-af: NPA and NIX blocks initialization
   https://www.spinics.net/lists/netdev/msg529163.html
3. octeontx2-af: NPC parser and NIX blocks initialization
   https://www.spinics.net/lists/netdev/msg530252.html

This patch series adds support for below
RVU generic:
- Function Level Reset irq handler
  When FLR is triggered for PFs, AF receives interrupt.
  This patchset adds logic for cleaning up of NPA, NIX
  and NPC block resources being used by PF.

- Mailbox communication between AF and it's VFs.
  Unlike VFs of PF1-PFn, AF which is PF0 can communicate
  with it's VFs directly. Added support for the same.

- AF's VFs IO configuration
  These VFs are mapped to use internal HW loopback channels
  instead of CGX LMACs. Each pair of VFs work as two of ends
  of hardwired interfaces. VF0's TX is VF1's Rx & viceversa.

NPC block:
- MCAM entry management
  Alloc/Free of contiguous/non-contiguous and lower/higher
  priority MCAM entry allocation and programming support.
- MCAM counters management and map/unmap with MCAM entries
- Default KEY extract profile
- HW errata workarounds

NIX block:
- Minimum and maximum allowed packet length config
- HW errata workarounds

Few more changes like shift to use mutex instead of spinlock etc
are done in this patchset.

Changes from v2:
 1 Fixed commit message of patch 'Relax resource lock into mutex'
   to a more unambiguous one.
   - Suggested by David Miller.

Changes from v1:
 1 Converted all mailbox message handler API names to small letters
   from mixed small and capital letters.
   - Suggested by David Miller.
 2 Fixed endian issues in patch 'Add support for stripping STAG/CTAG'
   - Suggested by Arnd Bergmann
 3 Elaborated commit message of patch 'Add FLR interrupt handler'
   to make it a bit more easy to understand.
   - Suggested by Arnd Bergmann

 Will fix the padding and alignment in mailbox message structure
 in a follow-up patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Errata 35038
  Software sets NIX_AF_RX_SW_SYNC[ENA] to sync (flush) in-flight packets
  the RX data path before configuration changes (e.g. disabling one or
  more RQs). Hardware clears [ENA] to indicate sync is done

  An issue exists whereby NIX may clear NIX_AF_RX_SW_SYNC [ENA] too
  early.

Errata 35057
  NIX may corrupt internal state when conditional clocks turn off.
  So turnon all clocks by default.

Errata 35786
 Parse nibble enable NPC configuration for KEY generation has to be
 identical for both Rx and Tx interfaces.

Also corrected endianness configuration for NIX i.e NIX_AF_CFG[AF_BE]
is bit8 and not bit1.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Add interrupt handlers for Master Enable events from PFs
  and Master Enable events from VFs of AF
- Master Enable is required for the MSIX delivery to work
- Master Enable bit trap handler doesn't have to do any anything
  other than clearing the TRPEND bit, since the enable/disable
  requirements are already taken care using mbox requests/flr handler.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added support to handle FLR for AF's VFs (i.e LBK VFs).
Just the FLR interrupt enable/disable, handler registration
etc, actual HW resource cleanup or LFs teardown logic is
already there.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Configure AF VFs such that they are able to talk over consecutive
loopback channels.

If 8 VFs are attached to AF then communication will work as below:

TX      RX
lbk0 -> lbk1
lbk1 -> lbk0

lbk2 -> lbk3
lbk3 -> lbk2

lbk4 -> lbk5
lbk5 -> lbk4

lbk6 -> lbk7
lbk7 -> lbk6
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Enable all AF VFs during probe. Since AF's VFs work in pairs
(eg: Pkts sent on VF0 are received by VF1 and viceversa),
enable only even number of VFs out of totalVFs, which should
again be less than number of loopback (LBK) channels.

Also enable VF's mailbox interrupts.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VFs attached to PFs other than AF can not communicate with AF
directly. Instead they are supposed to first send message to
the PF they are residing on and PF forwards it to the AF.
Responses to messages are handled in the reverse order.

On the other hand if VFs are on AF (PF0) itself then direct mailbox
communication is possible since there's no other PF in the way.

This patch addresses this particular case and adds support for
handling it.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Marko Kallio <mkallio@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Upon receiving FLR IRQ for a RVU PF, teardown or cleanup
resources held by that PF_FUNC. This patch cleans up,
NIX LF
 - Stop ingress/egress traffic
 - Disable NPC MCAM entries being used.
 - Free Tx scheduler queues
 - Disable RQ/SQ/CQ HW contexts
NPA LF
 - Disable Pool/Aura HW contexts
In future teardown of SSO/SSOW/TIM/CPT will be added.

Also added a mailbox message for a RVU PF to request
AF, to perform FLR for a RVU VF under it.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Stanislaw Kardach <skardach@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RVU admin function (AF) has all the priviliges to cleanup
HW state when VFIO triggers a PCIe function level reset (FLR)
due to either reset or a VM crash. FLR for RVU PF1-PFn will
trigger an IRQ to AF.

This patch enables all RVU PF's FLR interrupts and registers a
handler. Upon receiving an interrupt, a workqueue is scheduled
to cleanup all hardware blocks being used by the PF which
received the FLR.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While mapping a NIX LF to a NPA LF attached PF_FUNC or
SSO LF attached PF_FUNC, verify if PF_FUNC is valid and
if that PF_FUNC has a LF of that block attached to it or not.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This works by shadowing existing UCAST MCAM entry
with a new one additionally matching either NPC_LT_LB_CTAG
or NPC_LT_LB_STAG. For this to fully work one needs to
send properly configured NIX_VTAG_CFG message afterwards i.e with
strip and capture enabled and type set to 0.

On receiving tagged packet NIX will remove outer VLAN and capture
TCI in NIX_RX_PARSE_S.

Also simplified RX Vtag configuration flow
With this setting STRIP/CAPTURE VTAG actions separately would be
possible. Following combinations are possible: STRIP,
STRIP and CAPTURE, CAPTURE or nothing (0 disables respective actions).
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For a PF/VF with a NIXLF attached has default/reserved MCAM entries
for receiving Ucast/Bcast/Promisc traffic. Ideally traffic should be
forwarded to NIXLF only after it's contexts are initialized. This
patch keeps these default entries disabled and adds mbox messages
for a PF/VF to enable these once NPA/NIXLF initialization is done.
Likewise while PF/VF is being teared down, it can send the disable
mailbox message to stop receiving traffic.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added basic default MKEX profile. This profile tells
hardware what data to extract from packet and where to
place it (bit offset) in final KEY generated for the
parsed packet. Based on the bit placement of the packet
data, MCAM entries have to programmed for matching.

Also added a msg to retrieve this MKEX profile from PF/VF
which inturn can process it to determine how MCAM entry
has to be populated.
Signed-off-by: Santosh Shukla <sshukla@marvell.com>
Signed-off-by: Yuri Tolstov <ytolstov@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A new mailbox message is added to support allocating a MCAM entry
along with a counter and configuring it in one go. This reduces
the amount of mailbox communication involved in installing a new
MCAM rule.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alloc memory to save MCAM 'entry to counter' mapping and since
multiple entries can map to same counter, added counter's reference
count tracking.

Do 'entry to counter' mapping when a entry is being installed
and mbox msg sender requested to configure a counter as well.
Mapping is removed when a entry or counter is being freed or
a explicit mbox msg is received to unmap them.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NPC HW has counters which can be mapped to MCAM
entries to gather entry match statistics. This
patch adds support to allocate, free, clear and retrieve
stats of NPC MCAM counters. New mailbox messages have
been added for this. Similar to MCAM entries both
contiguous and non-contiguous counter allocation is
supported.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for a RVU PF/VF to enable, disable, configure
and shuffle MCAM entries via mbox commands. This patch adds
mailbox message formats and handling of these commands.

As of now otherthan validating MCAM entry index, info like
channel number e.t.c in MCAM config data sent by PF/VF are
not validated.

Also a max of 64 MCAM entries can be shuffled with a single
mbox command.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds NPC MCAM entry management and support for
allocating and freeing them via mailbox. Both contiguous and
non-contiguous allocations are supported. Incase of contiguous,
if request cannot be met then max contiguous number of available
entries are allocated.

High or low priority index allocation w.r.t a reference MCAM index
is also supported.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mailbox message handling is done in a workqueue context scheduled
from interrupt handler. So resource locks does not need to be a spinlock.
Therefore relax them into a mutex so that later on we may use them
in routines that might sleep.
Signed-off-by: Stanislaw Kardach <skardach@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds reading HW limits like number of Rx/Tx stats,
number of queue IRQs supported per NIX LF from AF registers
and sync them to PF/VF.
Signed-off-by: Kiran Kumar <kirankumark@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for RVU PF/VFs to modify min/max
packet lengths allowed by HW. For VFs on PF0, settings will
be automatically applied on LBK link. RX link's min/maxlen
is configured to min/max of PF and it's all VFs. On the TX side
if requested all SMQs attached to the requesting NIXLF will be
updated with new min/max lengths.

Also updates transmit credits for Tx links based on new maxlen.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch converts all mailbox message handler API
names to lowercase.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
r8169: series with further smaller improvements

Again nothing exciting, just smaller improvements.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Only the upper 12 bits are used for chip identification, this helps
to reduce the size of array mac_info.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtl8168_oob_notify is used in rtl8168dp_driver_start and
rtl8168dp_driver_stop only, so we can rename it to r8168dp_oob_notify.
The same applies to condition rtl_ocp_read_cond which can be renamed
to rtl_dp_ocp_read_cond. This allows to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The kernel can't be built any longer with this ancient GCC version.
Eventually it becomes clear what this statement actually does.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The compiler takes care of alignment and padding, I see no need to
bother him with manual hints.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ones who want to know can easily identify whether chip is PCI or
PCIe based on the chip name. I doubt there's any benefit in this
message, so remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The syslog message printed on driver load allows to easily identify
the mac version number (based on chip name and XID). So we don't
need this extra debug message which is wrong anyway because e.g.
RTL_GIGA_MAC_VER_01 has value 0.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using macro PCI_VDEVICE helps to simplify the PCI ID table.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recently the "slow event" handler was removed, therefore the member
name isn't appropriate any longer. In addition store the full mask,
including the RTL_EVENT_NAPI interrupt source bits.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Setting PCSTimeout interrupt source was copied from the vendor driver
which uses the chip programmable timer interrupt. The mainline driver
doesn't use this timer interrupt.

SYSErr indicates a PCI error and isn't defined on the PCIe models.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using dev_get_drvdata directly is simpler here.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the recent changes to the interrupt handler rtl_irq_enable and
rtl_irq_enable_all can be merged.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: add subscribe per asoc and sockopt SCTP_EVENT

This patchset mainly adds the Event Subscription sockopt described in
rfc6525#section-6.2:

"Subscribing to events as described in [RFC6458] uses a setsockopt()
call with the SCTP_EVENT socket option.  This option takes the
following structure, which specifies the association, the event type
(using the same value found in the event type field), and an on/off
boolean.

  struct sctp_event {
    sctp_assoc_t se_assoc_id;
    uint16_t     se_type;
    uint8_t      se_on;
  };

The user fills in the se_type field with the same value found in the
strreset_type field, i.e., SCTP_STREAM_RESET_EVENT.  The user will
also fill in the se_assoc_id field with either the association to set
this event on (this field is ignored for one-to-one style sockets) or
one of the reserved constant values defined in [RFC6458].  Finally,
the se_on field is set with a 1 to enable the event or a 0 to disable
the event."

As for the old SCTP_EVENTS Option with struct sctp_event_subscribe,
it's being DEPRECATED.

v1->v2:
  - fix some key word in changelog that triggerred the filters at
    vger.kernel.org.
v2->v3:
  - fix an array out of bounds noticed by Neil in patch 1/4.
====================
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds sockopt SCTP_EVENT described in rfc6525#section-6.2.
With this sockopt users can subscribe to an event from a specified
asoc.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp_event is a structure name defined in RFC for sockopt
SCTP_EVENT. To avoid the conflict, rename it.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>