- 16 Jun, 2019 8 commits
-
-
Eric Dumazet authored
Before thread in process context uses bh_lock_sock() we must disable bh. sysbot reported : WARNING: inconsistent lock state 5.2.0-rc3+ #32 Not tainted inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. blkid/26581 [HC0[0]:SC1[1]:HE1:SE0] takes: 00000000e0da85ee (slock-AF_AX25){+.?.}, at: spin_lock include/linux/spinlock.h:338 [inline] 00000000e0da85ee (slock-AF_AX25){+.?.}, at: ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:338 [inline] ax25_rt_autobind+0x3ca/0x720 net/ax25/ax25_route.c:429 ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1221 __sys_connect+0x264/0x330 net/socket.c:1834 __do_sys_connect net/socket.c:1845 [inline] __se_sys_connect net/socket.c:1842 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1842 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe irq event stamp: 2272 hardirqs last enabled at (2272): [<ffffffff810065f3>] trace_hardirqs_on_thunk+0x1a/0x1c hardirqs last disabled at (2271): [<ffffffff8100660f>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (1522): [<ffffffff87400654>] __do_softirq+0x654/0x94c kernel/softirq.c:320 softirqs last disabled at (2267): [<ffffffff81449010>] invoke_softirq kernel/softirq.c:374 [inline] softirqs last disabled at (2267): [<ffffffff81449010>] irq_exit+0x180/0x1d0 kernel/softirq.c:414 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(slock-AF_AX25); <Interrupt> lock(slock-AF_AX25); *** DEADLOCK *** 1 lock held by blkid/26581: #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:175 [inline] #0: 0000000010fd154d ((&ax25->dtimer)){+.-.}, at: call_timer_fn+0xe0/0x720 kernel/time/timer.c:1312 stack backtrace: CPU: 1 PID: 26581 Comm: blkid Not tainted 5.2.0-rc3+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_usage_bug.cold+0x393/0x4a2 kernel/locking/lockdep.c:2935 valid_state kernel/locking/lockdep.c:2948 [inline] mark_lock_irq kernel/locking/lockdep.c:3138 [inline] mark_lock+0xd46/0x1370 kernel/locking/lockdep.c:3513 mark_irqflags kernel/locking/lockdep.c:3391 [inline] __lock_acquire+0x159f/0x5490 kernel/locking/lockdep.c:3745 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4303 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:338 [inline] ax25_destroy_timer+0x53/0xc0 net/ax25/af_ax25.c:275 call_timer_fn+0x193/0x720 kernel/time/timer.c:1322 expire_timers kernel/time/timer.c:1366 [inline] __run_timers kernel/time/timer.c:1685 [inline] __run_timers kernel/time/timer.c:1653 [inline] run_timer_softirq+0x66f/0x1740 kernel/time/timer.c:1698 __do_softirq+0x25c/0x94c kernel/softirq.c:293 invoke_softirq kernel/softirq.c:374 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:414 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806 </IRQ> RIP: 0033:0x7f858d5c3232 Code: 8b 61 08 48 8b 84 24 d8 00 00 00 4c 89 44 24 28 48 8b ac 24 d0 00 00 00 4c 8b b4 24 e8 00 00 00 48 89 7c 24 68 48 89 4c 24 78 <48> 89 44 24 58 8b 84 24 e0 00 00 00 89 84 24 84 00 00 00 8b 84 24 RSP: 002b:00007ffcaf0cf5c0 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 RAX: 00007f858d7d27a8 RBX: 00007f858d7d8820 RCX: 00007f858d3940d8 RDX: 00007ffcaf0cf798 RSI: 00000000f5e616f3 RDI: 00007f858d394fee RBP: 0000000000000000 R08: 00007ffcaf0cf780 R09: 00007f858d7db480 R10: 0000000000000000 R11: 0000000009691a75 R12: 0000000000000005 R13: 00000000f5e616f3 R14: 0000000000000000 R15: 00007ffcaf0cf798 Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Nine years ago, I added RCU handling to neighbours, not pneighbours. (pneigh are not commonly used) Unfortunately I missed that /proc dump operations would use a common entry and exit point : neigh_seq_start() and neigh_seq_stop() We need to read_lock(tbl->lock) or risk use-after-free while iterating the pneigh structures. We might later convert pneigh to RCU and revert this patch. sysbot reported : BUG: KASAN: use-after-free in pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158 Read of size 8 at addr ffff888097f2a700 by task syz-executor.0/9825 CPU: 1 PID: 9825 Comm: syz-executor.0 Not tainted 5.2.0-rc4+ #32 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 pneigh_get_next.isra.0+0x24b/0x280 net/core/neighbour.c:3158 neigh_seq_next+0xdb/0x210 net/core/neighbour.c:3240 seq_read+0x9cf/0x1110 fs/seq_file.c:258 proc_reg_read+0x1fc/0x2c0 fs/proc/inode.c:221 do_loop_readv_writev fs/read_write.c:714 [inline] do_loop_readv_writev fs/read_write.c:701 [inline] do_iter_read+0x4a4/0x660 fs/read_write.c:935 vfs_readv+0xf0/0x160 fs/read_write.c:997 kernel_readv fs/splice.c:359 [inline] default_file_splice_read+0x475/0x890 fs/splice.c:414 do_splice_to+0x127/0x180 fs/splice.c:877 splice_direct_to_actor+0x2d2/0x970 fs/splice.c:954 do_splice_direct+0x1da/0x2a0 fs/splice.c:1063 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4592c9 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f4aab51dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00000000004592c9 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000246 R12: 00007f4aab51e6d4 R13: 00000000004c689d R14: 00000000004db828 R15: 00000000ffffffff Allocated by task 9827: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_kmalloc mm/kasan/common.c:489 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503 __do_kmalloc mm/slab.c:3660 [inline] __kmalloc+0x15c/0x740 mm/slab.c:3669 kmalloc include/linux/slab.h:552 [inline] pneigh_lookup+0x19c/0x4a0 net/core/neighbour.c:731 arp_req_set_public net/ipv4/arp.c:1010 [inline] arp_req_set+0x613/0x720 net/ipv4/arp.c:1026 arp_ioctl+0x652/0x7f0 net/ipv4/arp.c:1226 inet_ioctl+0x2a0/0x340 net/ipv4/af_inet.c:926 sock_do_ioctl+0xd8/0x2f0 net/socket.c:1043 sock_ioctl+0x3ed/0x780 net/socket.c:1194 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9824: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459 __cache_free mm/slab.c:3432 [inline] kfree+0xcf/0x220 mm/slab.c:3755 pneigh_ifdown_and_unlock net/core/neighbour.c:812 [inline] __neigh_ifdown+0x236/0x2f0 net/core/neighbour.c:356 neigh_ifdown+0x20/0x30 net/core/neighbour.c:372 arp_ifdown+0x1d/0x21 net/ipv4/arp.c:1274 inetdev_destroy net/ipv4/devinet.c:319 [inline] inetdev_event+0xa14/0x11f0 net/ipv4/devinet.c:1544 notifier_call_chain+0xc2/0x230 kernel/notifier.c:95 __raw_notifier_call_chain kernel/notifier.c:396 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:403 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1749 call_netdevice_notifiers_extack net/core/dev.c:1761 [inline] call_netdevice_notifiers net/core/dev.c:1775 [inline] rollback_registered_many+0x9b9/0xfc0 net/core/dev.c:8178 rollback_registered+0x109/0x1d0 net/core/dev.c:8220 unregister_netdevice_queue net/core/dev.c:9267 [inline] unregister_netdevice_queue+0x1ee/0x2c0 net/core/dev.c:9260 unregister_netdevice include/linux/netdevice.h:2631 [inline] __tun_detach+0xd8a/0x1040 drivers/net/tun.c:724 tun_detach drivers/net/tun.c:741 [inline] tun_chr_close+0xe0/0x180 drivers/net/tun.c:3451 __fput+0x2ff/0x890 fs/file_table.c:280 ____fput+0x16/0x20 fs/file_table.c:313 task_work_run+0x145/0x1c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:185 [inline] exit_to_usermode_loop+0x273/0x2c0 arch/x86/entry/common.c:168 prepare_exit_to_usermode arch/x86/entry/common.c:199 [inline] syscall_return_slowpath arch/x86/entry/common.c:279 [inline] do_syscall_64+0x58e/0x680 arch/x86/entry/common.c:304 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff888097f2a700 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes inside of 64-byte region [ffff888097f2a700, ffff888097f2a740) The buggy address belongs to the page: page:ffffea00025fca80 refcount:1 mapcount:0 mapping:ffff8880aa400340 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea000250d548 ffffea00025726c8 ffff8880aa400340 raw: 0000000000000000 ffff888097f2a000 0000000100000020 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888097f2a600: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc ffff888097f2a680: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc >ffff888097f2a700: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ^ ffff888097f2a780: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff888097f2a800: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc Fixes: 767e97e1 ("neigh: RCU conversion of struct neighbour") Signed-off-by: -
Eric Dumazet authored
tcp_tx_skb_cache_key and tcp_rx_skb_cache_key must be available even if CONFIG_SYSCTL is not set. Fixes: 0b7d7f6b ("tcp: add tcp_tx_skb_cache sysctl") Fixes: ede61ca4 ("tcp: add tcp_rx_skb_cache sysctl") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Dexuan Cui authored
gcc 8.2.0 may report these bogus warnings under some condition: warning: ‘vnew’ may be used uninitialized in this function warning: ‘hvs_new’ may be used uninitialized in this function Actually, the 2 pointers are only initialized and used if the variable "conn_from_host" is true. The code is not buggy here. Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
Ivan Vecera authored
Number of Rx queues used for flow hashing returned by the driver is incorrect and this bug prevents user to use the last Rx queue in indirection table. Let's say we have a NIC with 6 combined queues: [root@sm-03 ~]# ethtool -l enp4s0f0 Channel parameters for enp4s0f0: Pre-set maximums: RX: 5 TX: 5 Other: 0 Combined: 6 Current hardware settings: RX: 0 TX: 0 Other: 0 Combined: 6 Default indirection table maps all (6) queues equally but the driver reports only 5 rings available. [root@sm-03 ~]# ethtool -x enp4s0f0 RX flow hash indirection table for enp4s0f0 with 5 RX ring(s): 0: 0 1 2 3 4 5 0 1 8: 2 3 4 5 0 1 2 3 16: 4 5 0 1 2 3 4 5 24: 0 1 2 3 4 5 0 1 ... Now change indirection table somehow: [root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1 [root@sm-03 ~]# ethtool -x enp4s0f0 RX flow hash indirection table for enp4s0f0 with 6 RX ring(s): 0: 0 0 0 0 0 0 0 0 ... 64: 1 1 1 1 1 1 1 1 ... Now it is not possible to change mapping back to equal (default) state: [root@sm-03 ~]# ethtool -X enp4s0f0 equal 6 Cannot set RX flow hash configuration: Invalid argument Fixes: 594ad54a ("be2net: Add support for setting and getting rx flow hash options") Reported-by:Tianhao <tizhao@redhat.com> Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Govindarajulu Varadarajan authored
When stack receives pkt: [802.1P vlan 0][802.1AD vlan 100][IPv4], vlan_do_receive() returns false if it does not find vlan_dev. Later __netif_receive_skb_core() fails to find packet type handler for skb->protocol 801.1AD and drops the packet. 801.1P header with vlan id 0 should be handled as untagged packets. This patch fixes it by checking if vlan_id is 0 and processes next vlan header. Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2019-06-15 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) fix stack layout of JITed x64 bpf code, from Alexei. 2) fix out of bounds memory access in bpf_sk_storage, from Arthur. 3) fix lpm trie walk, from Jonathan. 4) fix nested bpf_perf_event_output, from Matt. 5) and several other fixes. ==================== Signed-off-by: -
David S. Miller authored
This reverts commit ef7bfa84. Russell King espressed some strong opposition to this change, explaining that this is trying to make phylink behave outside of how it has been designed. Signed-off-by:
-
- 15 Jun, 2019 21 commits
-
-
Matt Mullins authored
BPF_PROG_TYPE_RAW_TRACEPOINTs can be executed nested on the same CPU, as they do not increment bpf_prog_active while executing. This enables three levels of nesting, to support - a kprobe or raw tp or perf event, - another one of the above that irq context happens to call, and - another one in nmi context (at most one of which may be a kprobe or perf event). Fixes: 20b9d7ac ("bpf: avoid excessive stack usage for perf_sample_data") Signed-off-by:
Matt Mullins <mmullins@fb.com> Acked-by:
Andrii Nakryiko <andriin@fb.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Arthur Fabre authored
bpf_sk_storage maps use multiple spin locks to reduce contention. The number of locks to use is determined by the number of possible CPUs. With only 1 possible CPU, bucket_log == 0, and 2^0 = 1 locks are used. When updating elements, the correct lock is determined with hash_ptr(). Calling hash_ptr() with 0 bits is undefined behavior, as it does: x >> (64 - bits) Using the value results in an out of bounds memory access. In my case, this manifested itself as a page fault when raw_spin_lock_bh() is called later, when running the self tests: ./tools/testing/selftests/bpf/test_verifier 773 775 [ 16.366342] BUG: unable to handle page fault for address: ffff8fe7a66f93f8 Force the minimum number of locks to two. Signed-off-by:
Arthur Fabre <afabre@cloudflare.com> Fixes: 6ac99e8f ("bpf: Introduce bpf sk local storage") Acked-by:
-
Stephen Barber authored
Set the SOCK_DONE flag to match the TCP_CLOSING state when a peer has shut down and there is nothing left to read. This fixes the following bug: 1) Peer sends SHUTDOWN(RDWR). 2) Socket enters TCP_CLOSING but SOCK_DONE is not set. 3) read() returns -ENOTCONN until close() is called, then returns 0. Signed-off-by:
Stephen Barber <smbarber@chromium.org> Signed-off-by:
-
Linus Walleij authored
We get this regression when using RTL8366RB as part of a bridge with OpenWrt: WARNING: CPU: 0 PID: 1347 at net/switchdev/switchdev.c:291 switchdev_port_attr_set_now+0x80/0xa4 lan0: Commit of attribute (id=7) failed. (...) realtek-smi switch lan0: failed to initialize vlan filtering on this port This is because it is trying to disable VLAN filtering on VLAN0, as we have forgot to add 1 to the port number to get the right VLAN in rtl8366_vlan_filtering(): when we initialize the VLAN we associate VLAN1 with port 0, VLAN2 with port 1 etc, so we need to add 1 to the port offset. Fixes: d8652956 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Ioana Ciornei authored
The phy_state field of phylink should carry only valid information especially when this can be passed to the .mac_config callback. Update the an_enabled field with the autoneg state in the phylink_phy_change function. Fixes: 9525ae83 ("phylink: add phylink infrastructure") Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tcp: add three static keys Recent addition of per TCP socket rx/tx cache brought regressions for some workloads, as reported by Feng Tang. It seems better to make them opt-in, before we adopt better heuristics. The last patch adds high_order_alloc_disable sysctl to ask TCP sendmsg() to exclusively use order-0 allocations, as mm layer has specific optimizations. ==================== Signed-off-by: -
Eric Dumazet authored
>From linux-3.7, (commit 5640f768 "net: use a per task frag allocator") TCP sendmsg() has preferred using order-3 allocations. While it gives good results for most cases, we had reports that heavy uses of TCP over loopback were hitting a spinlock contention in page allocations/freeing. This commits adds a sysctl so that admins can opt-in for order-0 allocations. Hopefully mm layer might optimize order-3 allocations in the future since it could give us a nice boost (see 8 lines of following benchmark) The following benchmark shows a win when more than 8 TCP_STREAM threads are running (56 x86 cores server in my tests) for thr in {1..30} do sysctl -wq net.core.high_order_alloc_disable=0 T0=`./super_netperf $thr -H 127.0.0.1 -l 15` sysctl -wq net.core.high_order_alloc_disable=1 T1=`./super_netperf $thr -H 127.0.0.1 -l 15` echo $thr:$T0:$T1 done 1: 49979: 37267 2: 98745: 76286 3: 141088: 110051 4: 177414: 144772 5: 197587: 173563 6: 215377: 208448 7: 241061: 234087 8: 267155: 263373 9: 295069: 297402 10: 312393: 335213 11: 340462: 368778 12: 371366: 403954 13: 412344: 443713 14: 426617: 473580 15: 474418: 507861 16: 503261: 538539 17: 522331: 563096 18: 532409: 567084 19: 550824: 605240 20: 525493: 641988 21: 564574: 665843 22: 567349: 690868 23: 583846: 710917 24: 588715: 736306 25: 603212: 763494 26: 604083: 792654 27: 602241: 796450 28: 604291: 797993 29: 611610: 833249 30: 577356: 841062 Signed-off-by:
-
Eric Dumazet authored
Feng Tang reported a performance regression after introduction of per TCP socket tx/rx caches, for TCP over loopback (netperf) There is high chance the regression is caused by a change on how well the 32 KB per-thread page (current->task_frag) can be recycled, and lack of pcp caches for order-3 pages. I could not reproduce the regression myself, cpus all being spinning on the mm spinlocks for page allocs/freeing, regardless of enabling or disabling the per tcp socket caches. It seems best to disable the feature by default, and let admins enabling it. MM layer either needs to provide scalable order-3 pages allocations, or could attempt a trylock on zone->lock if the caller only attempts to get a high-order page and is able to fallback to order-0 ones in case of pressure. Tests run on a 56 cores host (112 hyper threads) - 35.49% netperf [kernel.vmlinux] [k] queued_spin_lock_slowpath - 35.49% queued_spin_lock_slowpath - 18.18% get_page_from_freelist - __alloc_pages_nodemask - 18.18% alloc_pages_current skb_page_frag_refill sk_page_frag_refill tcp_sendmsg_locked tcp_sendmsg inet_sendmsg sock_sendmsg __sys_sendto __x64_sys_sendto do_syscall_64 entry_SYSCALL_64_after_hwframe __libc_send + 17.31% __free_pages_ok + 31.43% swapper [kernel.vmlinux] [k] intel_idle + 9.12% netperf [kernel.vmlinux] [k] copy_user_enhanced_fast_string + 6.53% netserver [kernel.vmlinux] [k] copy_user_enhanced_fast_string + 0.69% netserver [kernel.vmlinux] [k] queued_spin_lock_slowpath + 0.68% netperf [kernel.vmlinux] [k] skb_release_data + 0.52% netperf [kernel.vmlinux] [k] tcp_sendmsg_locked 0.46% netperf [kernel.vmlinux] [k] _raw_spin_lock_irqsave Fixes: 472c2e07 ("tcp: add one skb cache for tx") Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
-
Eric Dumazet authored
Instead of relying on rps_needed, it is safer to use a separate static key, since we do not want to enable TCP rx_skb_cache by default. This feature can cause huge increase of memory usage on hosts with millions of sockets. Signed-off-by:
-
Eric Dumazet authored
Convert proc_dointvec_minmax_bpf_stats() into a more generic helper, since we are going to use jump labels more often. Note that sysctl_bpf_stats_enabled is removed, since it is no longer needed/used. Signed-off-by:
-
Haiyang Zhang authored
For better consistency of synthetic NIC names, we set the probe mode to PROBE_FORCE_SYNCHRONOUS. So the names can be aligned with the vmbus channel offer sequence. Fixes: af0a5646 ("use the new async probing feature for the hyperv drivers") Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Vlad Buslov authored
Current flower mask creating code assumes that temporary mask that is used when inserting new filter is stack allocated. To prevent race condition with data patch synchronize_rcu() is called every time fl_create_new_mask() replaces temporary stack allocated mask. As reported by Jiri, this increases runtime of creating 20000 flower classifiers from 4 seconds to 163 seconds. However, this design is no longer necessary since temporary mask was converted to be dynamically allocated by commit 2cddd201 ("net/sched: cls_flower: allocate mask dynamically in fl_change()"). Remove synchronize_rcu() calls from mask creation code. Instead, refactor fl_change() to always deallocate temporary mask with rcu grace period. Fixes: 195c234d ("net: sched: flower: handle concurrent mask insertion") Reported-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Tested-by:
-
Anders Roxell authored
When building with CONFIG_NET_DSA_REALTEK_SMI and CONFIG_REALTEK_PHY enabled as loadable modules, we see the following warning: warning: same module names found: drivers/net/phy/realtek.ko drivers/net/dsa/realtek.ko Rework so the driver name is realtek-smi instead of realtek. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
Neil Horman authored
Based on comments from Xin, even after fixes for our recent syzbot report of cookie memory leaks, its possible to get a resend of an INIT chunk which would lead to us leaking cookie memory. To ensure that we don't leak cookie memory, free any previously allocated cookie first. Change notes v1->v2 update subsystem tag in subject (davem) repeat kfree check for peer_random and peer_hmacs (xin) v2->v3 net->sctp also free peer_chunks v3->v4 fix subject tags v4->v5 remove cut line Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by: syzbot+f7e9153b037eac9b1df8@syzkaller.appspotmail.com CC: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> CC: Xin Long <lucien.xin@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Robert Hancock authored
If some of the switch ports were not listed in the device tree, due to being unused, the ksz_mib_read_work function ended up accessing a NULL dp->slave pointer and causing an oops. Skip checking statistics for any unused ports. Fixes: 7c6ff470 ("net: dsa: microchip: add MIB counter reading support") Signed-off-by:
Robert Hancock <hancock@sedsystems.ca> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Reinhard Speyerer says: ==================== qmi_wwan: fix QMAP handling This series addresses the following issues observed when using the QMAP support of the qmi_wwan driver: 1. The QMAP code in the qmi_wwan driver is based on the CodeAurora GobiNet driver ([1], [2]) which does not process QMAP padding in the RX path correctly. This causes qmimux_rx_fixup() to pass incorrect data to the IP stack when padding is used. 2. qmimux devices currently lack proper network device usage statistics. 3. RCU stalls on device disconnect with QMAP activated like this # echo Y > /sys/class/net/wwan0/qmi/raw_ip # echo 1 > /sys/class/net/wwan0/qmi/add_mux # echo 2 > /sys/class/net/wwan0/qmi/add_mux # echo 3 > /sys/class/net/wwan0/qmi/add_mux have been observed in certain setups: [ 2273.676593] option1 ttyUSB16: GSM modem (1-port) converter now disconnected from ttyUSB16 [ 2273.676617] option 6-1.2:1.0: device disconnected [ 2273.676774] WARNING: CPU: 1 PID: 141 at kernel/rcu/tree_plugin.h:342 rcu_note_context_switch+0x2a/0x3d0 [ 2273.676776] Modules linked in: option qmi_wwan cdc_mbim cdc_ncm qcserial cdc_wdm usb_wwan sierra sierra_net usbnet mii edd coretemp iptable_mangle ip6_tables iptable_filter ip_tables cdc_acm dm_mod dax iTCO_wdt evdev iTCO_vendor_support sg ftdi_sio usbserial e1000e ptp pps_core i2c_i801 ehci_pci button lpc_ich i2c_core mfd_core uhci_hcd ehci_hcd rtc_cmos usbcore usb_common sd_mod fan ata_piix thermal [ 2273.676817] CPU: 1 PID: 141 Comm: kworker/1:1 Not tainted 4.19.38-rsp-1 #1 [ 2273.676819] Hardware name: Not Applicable Not Applicable /CX-GS/GM45-GL40 , BIOS V1.11 03/23/2011 [ 2273.676828] Workqueue: usb_hub_wq hub_event [usbcore] [ 2273.676832] EIP: rcu_note_context_switch+0x2a/0x3d0 [ 2273.676834] Code: 55 89 e5 57 56 89 c6 53 83 ec 14 89 45 f0 e8 5d ff ff ff 89 f0 64 8b 3d 24 a6 86 c0 84 c0 8b 87 04 02 00 00 75 7a 85 c0 7e 7a <0f> 0b 80 bf 08 02 00 00 00 0f 84 87 00 00 00 e8 b2 e2 ff ff bb dc [ 2273.676836] EAX: 00000001 EBX: f614bc00 ECX: 00000001 EDX: c0715b81 [ 2273.676838] ESI: 00000000 EDI: f18beb40 EBP: f1a3dc20 ESP: f1a3dc00 [ 2273.676840] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010002 [ 2273.676842] CR0: 80050033 CR2: b7e97230 CR3: 2f9c4000 CR4: 000406b0 [ 2273.676843] Call Trace: [ 2273.676847] ? preempt_count_add+0xa5/0xc0 [ 2273.676852] __schedule+0x4e/0x4f0 [ 2273.676855] ? __queue_work+0xf1/0x2a0 [ 2273.676858] ? _raw_spin_lock_irqsave+0x14/0x40 [ 2273.676860] ? preempt_count_add+0x52/0xc0 [ 2273.676862] schedule+0x33/0x80 [ 2273.676865] _synchronize_rcu_expedited+0x24e/0x280 [ 2273.676867] ? rcu_accelerate_cbs_unlocked+0x70/0x70 [ 2273.676871] ? wait_woken+0x70/0x70 [ 2273.676873] ? rcu_accelerate_cbs_unlocked+0x70/0x70 [ 2273.676875] ? _synchronize_rcu_expedited+0x280/0x280 [ 2273.676877] synchronize_rcu_expedited+0x22/0x30 [ 2273.676881] synchronize_net+0x25/0x30 [ 2273.676885] dev_deactivate_many+0x133/0x230 [ 2273.676887] ? preempt_count_add+0xa5/0xc0 [ 2273.676890] __dev_close_many+0x4d/0xc0 [ 2273.676892] ? skb_dequeue+0x40/0x50 [ 2273.676895] dev_close_many+0x5d/0xd0 [ 2273.676898] rollback_registered_many+0xbf/0x4c0 [ 2273.676901] ? raw_notifier_call_chain+0x1a/0x20 [ 2273.676904] ? call_netdevice_notifiers_info+0x23/0x60 [ 2273.676906] ? netdev_master_upper_dev_get+0xe/0x70 [ 2273.676908] rollback_registered+0x1f/0x30 [ 2273.676911] unregister_netdevice_queue+0x47/0xb0 [ 2273.676915] qmimux_unregister_device+0x1f/0x30 [qmi_wwan] [ 2273.676917] qmi_wwan_disconnect+0x5d/0x90 [qmi_wwan] ... [ 2273.677001] ---[ end trace 0fcc5f88496b485a ]--- [ 2294.679136] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: [ 2294.679140] rcu: Tasks blocked on level-0 rcu_node (CPUs 0-1): P141 [ 2294.679144] rcu: (detected by 0, t=21002 jiffies, g=265857, q=8446) [ 2294.679148] kworker/1:1 D 0 141 2 0x80000000 In addition the permitted QMAP mux_id value range is extended for compatibility with ip(8) and the rmnet driver. Reinhard [1]: https://portland.source.codeaurora.org/patches/quic/gobi [2]: https://portland.source.codeaurora.org/quic/qsdk/oss/lklm/gobinet/ ==================== Tested-by:
Daniele Palmas <dnlplm@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Reinhard Speyerer authored
Permit mux_id values up to 254 to be used in qmimux_register_device() for compatibility with ip(8) and the rmnet driver. Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
Reinhard Speyerer <rspmn@arcor.de> Signed-off-by:
-
Reinhard Speyerer authored
Switch qmimux_unregister_device() and qmi_wwan_disconnect() to use unregister_netdevice_queue() and unregister_netdevice_many() instead of unregister_netdevice(). This avoids RCU stalls which have been observed on device disconnect in certain setups otherwise. Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Reinhard Speyerer authored
Add proper network device usage statistics for qmimux devices instead of reporting all-zero values for them. Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Reinhard Speyerer authored
The QMAP code in the qmi_wwan driver is based on the CodeAurora GobiNet driver which does not process QMAP padding in the RX path correctly. Add support for QMAP padding to qmimux_rx_fixup() according to the description of the rmnet driver. Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support") Cc: Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Alexei Starovoitov authored
Since commit 177366bf the %rbp stopped pointing to %rbp of the previous stack frame. That broke frame pointer based stack unwinding. This commit is a partial revert of it. Note that the location of tail_call_cnt is fixed, since the verifier enforces MAX_BPF_STACK stack size for programs with tail calls. Fixes: 177366bf ("bpf: change x86 JITed program stack layout") Signed-off-by:
-
- 14 Jun, 2019 11 commits
-
-
Toshiaki Makita authored
.ndo_xdp_xmit() assumes it is called under RCU. For example virtio_net uses RCU to detect it has setup the resources for tx. The assumption accidentally broke when introducing bulk queue in devmap. Fixes: 5d053f9d ("bpf: devmap prepare xdp frames for bulking") Reported-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
Toshiaki Makita <toshiaki.makita1@gmail.com> Signed-off-by:
-
Toshiaki Makita authored
dev_map_free() forgot to free bulk queue when freeing its entries. Fixes: 5d053f9d ("bpf: devmap prepare xdp frames for bulking") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Toshiaki Makita authored
dev_map_free() waits for flush_needed bitmap to be empty in order to ensure all flush operations have completed before freeing its entries. However the corresponding clear_bit() was called before using the entries, so the entries could be used after free. All access to the entries needs to be done before clearing the bit. It seems commit a5e2da6e ("bpf: netdev is never null in __dev_map_flush") accidentally changed the clear_bit() and memory access order. Note that the problem happens only in __dev_map_flush(), not in dev_map_flush_old(). dev_map_flush_old() is called only after nulling out the corresponding netdev_map entry, so dev_map_free() never frees the entry thus no such race happens there. Fixes: a5e2da6e ("bpf: netdev is never null in __dev_map_flush") Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2019-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes, all over: * a few memory leaks * fixes for management frame protection security and A2/A3 confusion (affecting TDLS as well) * build fix for certificates * etc. ==================== Signed-off-by:
-
Russell King - ARM Linux admin authored
While reviewing the DPAA2 work, it has become apparent that we need better documentation about which members of the phylink link state structure are valid in the mac_config call. Improve this documentation. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Young Xiao authored
Check that the NFC_ATTR_TARGET_INDEX attributes (in addition to NFC_ATTR_DEVICE_INDEX) are provided by the netlink client prior to accessing them. This prevents potential unhandled NULL pointer dereference exceptions which can be triggered by malicious user-mode programs, if they omit one or both of these attributes. Signed-off-by:
Young Xiao <92siuyang@gmail.com> Signed-off-by:
-
Avraham Stern authored
Instead of reporting the AP's TSF, host time was reported. Fix it. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Eric Biggers authored
In wiphy_new_nm(), if an error occurs after dev_set_name() and device_initialize() have already been called, it's necessary to call put_device() (via wiphy_free()) to avoid a memory leak. Reported-by: syzbot+7fddca22578bc67c3fe4@syzkaller.appspotmail.com Fixes: 1f87f7d3 ("cfg80211: add rfkill support") Cc: stable@vger.kernel.org Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Mordechay Goodstein authored
The bits of Rx MCS Map in VHT capability were enumerated with index transform - index i -> (i + 1) bit => nss i. BUG! while it should be - index i -> (i + 1) bit => (i + 1) nss. The bug was exposed in commit a53b2a0b ("iwlwifi: mvm: implement VHT extended NSS support in rs.c"), where iwlwifi started using the function. Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Fixes: b0aa75f0 ("ieee80211: add new VHT capability fields/parsing") Signed-off-by:
-
Naftali Goldstein authored
It is not a good idea to try to perform any work (e.g. send an auth frame) during reconfigure flow. Prevent this from happening, and at the end of the reconfigure flow requeue all the works. Signed-off-by:
Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by:
-
Luca Coelho authored
The seen_indices variable is u64 and in other parts of the code we assume mbssid_index_ie[2] can be up to 45, so we should use the 64-bit versions of BIT, namely, BIT_ULL(). Reported-by:
Dan Carpented <dan.carpenter@oracle.com> Signed-off-by:
-
