- 06 Jan, 2006 16 commits
-
-
Hans Reiser authored
This patch makes truncate_inode_pages_range from truncate_inode_pages. truncate_inode_pages became a one-liner call to truncate_inode_pages_range. Reiser4 needs truncate_inode_pages_ranges because it tries to keep correspondence between existences of metadata pointing to data pages and pages to which those metadata point to. So, when metadata of certain part of file is removed from filesystem tree, only pages of corresponding range are to be truncated. (Needed by the madvise(MADV_REMOVE) patch) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andy Whitcroft authored
register_memory is global and declared so in linux/memory.h. Update the HOTPLUG specific definition to match. This fixes a compile warning when HOTPLUG is enabled. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andy Whitcroft authored
Both register_memory_notifer and unregister_memory_notifier are global and declared so in linux/memory.h. Update the HOTPLUG specific definitions to match. This fixes a compile warning when HOTPLUG is enabled. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andy Whitcroft authored
__add_section defines an unused pointer to the zones pgdat. Remove this definition. This fixes a compile warning. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paul Jackson authored
Two changes to the setting of the ALLOC_CPUSET flag in mm/page_alloc.c:__alloc_pages() - A bug fix - the "ignoring mins" case should not be honoring ALLOC_CPUSET. This case of all cases, since it is handling a request that will free up more memory than is asked for (exiting tasks, e.g.) should be allowed to escape cpuset constraints when memory is tight. - A logic change to make it simpler. Honor cpusets even on GFP_ATOMIC (!wait) requests. With this, cpuset confinement applies to all requests except ALLOC_NO_WATERMARKS, so that in a subsequent cleanup patch, I can remove the ALLOC_CPUSET flag entirely. Since I don't know any real reason this logic has to be either way, I am choosing the path of the simplest code. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
- This function returns -EINVAL all the time. Fix. - Decruftify it a bit too. - Writing to it doesn't seem to do what it's suppoed to do. Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
NeilBrown authored
The hash.h hash_long function, when used on a 64 bit machine, ignores many of the middle-order bits. (The prime chosen it too bit-sparse). IP addresses for clients of an NFS server are very likely to differ only in the low-order bits. As addresses are stored in network-byte-order, these bits become middle-order bits in a little-endian 64bit 'long', and so do not contribute to the hash. Thus you can have the situation where all clients appear on one hash chain. So, until hash_long is fixed (or maybe forever), us a hash function that works well on IP addresses - xor the bytes together. Thanks to "Iozone" <capps@iozone.org> for identifying this problem. Cc: "Iozone" <capps@iozone.org> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Herbert Xu authored
Janos Haar of First NetCenter Bt. reported numerous crashes involving the NBD driver. With his help, this was tracked down to bogus bio vectors which in turn was the result of a race condition between the receive/transmit routines in the NBD driver. The bug manifests itself like this: CPU0 CPU1 do_nbd_request add req to queuelist nbd_send_request send req head for each bio kmap send nbd_read_stat nbd_find_request nbd_end_request kunmap When CPU1 finishes nbd_end_request, the request and all its associated bio's are freed. So when CPU0 calls kunmap whose argument is derived from the last bio, it may crash. Under normal circumstances, the race occurs only on the last bio. However, if an error is encountered on the remote NBD server (such as an incorrect magic number in the request), or if there were a bug in the server, it is possible for the nbd_end_request to occur any time after the request's addition to the queuelist. The following patch fixes this problem by making sure that requests are not added to the queuelist until after they have been completed transmission. In order for the receiving side to be ready for responses involving requests still being transmitted, the patch introduces the concept of the active request. When a response matches the current active request, its processing is delayed until after the tranmission has come to a stop. This has been tested by Janos and it has been successful in curing this race condition. From: Herbert Xu <herbert@gondor.apana.org.au> Here is an updated patch which removes the active_req wait in nbd_clear_queue and the associated memory barrier. I've also clarified this in the comment. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: <djani22@dynamicweb.hu> Cc: Paul Clements <Paul.Clements@SteelEye.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Joshua Kwan authored
nls_utf8 is available, and the check in hfsplus_fill_super checks the wrong pointer for NULLness (it checks the saved nls, not the new one that it needs to use.) Signed-off-by: Joshua Kwan <joshk@triplehelix.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Chuck Ebbert authored
Setting RF (resume flag) allows a debugger to resume execution after a code breakpoint without tripping the breakpoint again. It is reset by the CPU after execution of one instruction. Requested by Stephane Eranian: "I am trying to the user HW debug registers on i386 and I am running into a problem with ptrace() not allowing access to EFLAGS_RF for POKEUSER (see FLAG_MASK). [ ... ] It avoids the need to remove the breakpoint, single step, and reinstall. The equivalent functionality exists on IA-64 and is allowed by ptrace()" Cc: Stephane Eranian <eranian@hpl.hp.com> Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
-
Jody McIntyre authored
-
Kris Katterjohn authored
These patches add the header linux/if_ether.h and change 1500 to ETH_DATA_LEN in some files. Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Morton authored
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Jan, 2006 24 commits
-
-
-
Richard Purdie authored
Add some PCMCIA device IDs for the microdrive found in the Sharp Zaurus and a different revision of the Socket CF+ Bluetooth card. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Daniel Ritz authored
kill the socket_shutdown()/shutdown_socket() confusion by making it one single function. move cs_socket_put() in there. nicer to read and smaller: original: text data bss dec hex filename 25181 1076 32 26289 66b1 drivers/pcmcia/pcmcia_core.ko patched: text data bss dec hex filename 24973 1076 32 26081 65e1 drivers/pcmcia/pcmcia_core.ko Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Alexey Dobriyan authored
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Convert users of kmalloc and memset to kzalloc Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Do not wildly probe the IO ports we're trying to use on PARISC. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Export the stored values instead of re-reading everything in the socket information sysfs files, and make them accessible to all users, not only to root. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Vitaly Bordug authored
This adds PCMCIA support for both MPC885ADS and MPC866ADS. This is established not together with FADS, because 885 does not have io_block_mapping() for BCSR area. Also, some cleanups done both for 885ADS and MBX. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Vitaly Bordug authored
This fixes misconfiguration that could result in odd work of some old CF cards. Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Some PCMCIA sockets have statically mapped memory windows, but dynamically mapped IO windows. Using the "nonstatic" socket library is inpractical for them, as they do neither need a resource database (as we can trust the kernel resource database on m68k and ppc) nor lots of other features of that library. Let them get a small "iodyn" socket library (105 lines of code) instead. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Update the PCMCIA sound drivers to handle the recent changes to the PCMCIA core. A part of this merge was done by Takashi Iwai <tiwai@suse.de>. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
The linked list of devices managed by each PCMCIA driver is, in very most cases, unused. Therefore, remove it from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Remove the old "detach" mechanism as it is unused now. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Merge the suspend and resume methods for 16-bit PCMCIA cards into the device model -- for both runtime power management and suspend to ram/disk. Bugfix in ds.c by Richard Purdie Signed-Off-By: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Daniel Ritz authored
Make the bridge specific initialization code config options depending on CONFIG_EMBEDDED. Config options for TI/EnE, Toshiba, Ricoh and O2Micro are available. Disabling all of the specific tweaks cuts off more than half of yenta_socket.ko. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Andrew Morton authored
Also return a value if CONFIG_PCMCIA_PROBE is not set. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Add a return value to pcmcia_validate_mem. Only if we have enough memory available to map the CIS, we should proceed in trying to determine information about the device. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
The .get_socket callback is never used by the PCMCIA core, therefore remove it. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Dominik Brodowski authored
Remove the register_callback declaration in struct pccard_operations as it is unused. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Daniel Ritz authored
Don't waste cpu time in yenta interrupt handler when the interrupt was for another device. Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Pavel Machek authored
Fix macro abuse in pcmcia. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-