- 31 Oct, 2008 40 commits
-
-
Johannes Berg authored
Warn when ieee80211_hw_config returns an error, it shouldn't happen; remove a number of printks that would happen in such a case and one printk that is user-triggerable. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
This isn't used by anyone, if we ever need it we can add it back, until then it's useless. Signed-off-by:
-
Johannes Berg authored
Nothing very interesting, some checkpatch inspired stuff, some other things. Signed-off-by:
-
Johannes Berg authored
These parameters shouldn't be configurable via debugfs, if they need to be configurable nl80211 support has to be added, if not then they don't need to be writable here either. Signed-off-by:
-
Johannes Berg authored
This code uses static variables and thus cannot be kept. Signed-off-by:
-
Harvey Harrison authored
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Harvey Harrison authored
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by:
-
Harvey Harrison authored
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by:
-
Harvey Harrison authored
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by:
-
Harvey Harrison authored
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by:
-
Harvey Harrison authored
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by:
-
Harvey Harrison authored
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by:
-
Jarek Poplawski authored
This patch adds qdisc_peek_dequeued() wrapper to emulate peek method with qdisc->dequeue() and storing "peeked" skb in qdisc->gso_skb until dequeuing. This is mainly for compatibility reasons not to break some strange configs because peeking is expected for non-work-conserving parent qdiscs to query work-conserving child qdiscs. This implementation requires using qdisc_dequeue_peeked() wrapper instead of directly calling qdisc->dequeue() for all qdiscs ever querried with qdisc->ops->peek() or qdisc_peek_dequeued(). Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Signed-off-by:
-
Jarek Poplawski authored
Use qdisc->ops->peek() instead of ->dequeue() & ->requeue() pair. After this patch the only remaining user of qdisc->ops->requeue() is netem_enqueue(). Based on ideas of Herbert Xu, Patrick McHardy and David S. Miller. Signed-off-by:
-
Jarek Poplawski authored
Add qdisc->ops->peek() implementation for work-conserving qdiscs. With feedback from Patrick McHardy. Signed-off-by:
-
Jarek Poplawski authored
With feedback from Patrick McHardy. Signed-off-by:
-
Patrick McHardy authored
From: Patrick McHardy <kaber@trash.net> Just as a demonstration how easy adding a peek operation to the work-conserving qdiscs actually is. It doesn't need to keep or change any internal state in many cases thanks to the guarantee that the packet will either be dequeued or, if another packet arrives, the upper qdisc will immediately ->peek again to reevaluate the state. (This is only slightly modified Patrick's patch.) Signed-off-by:
-
Jarek Poplawski authored
Add Qdisc_ops peek() method in order to replace requeuing. Based on ideas and patches of Herbert Xu, Patrick McHardy and David S. Miller. Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
-
David S. Miller authored
Conflicts: drivers/net/wireless/p54/p54common.c
-
fernando@oss.ntt.co authored
I noticed that, under certain conditions, ESRCH can be leaked from the xfrm layer to user space through sys_connect. In particular, this seems to happen reliably when the kernel fails to resolve a template either because the AF_KEY receive buffer being used by racoon is full or because the SA entry we are trying to use is in XFRM_STATE_EXPIRED state. However, since this could be a transient issue it could be argued that EAGAIN would be more appropriate. Besides this error code is not even documented in the man page for sys_connect (as of man-pages 3.07). Signed-off-by:
Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by:
-
David S. Miller authored
As noticed by Saikiran Madugula, commit 7447ef63 ("loopback: Remove rest of LOOPBACK_TSO code.") got rid of emulate_large_send_offload() but didn't get rid of the call site as well. Signed-off-by:
-
-
Alexey Dobriyan authored
register_pernet_gen_device() can't be used is nf_conntrack_pptp module is also used (compiled in or loaded). Right now, proto_gre_net_exit() is called before nf_conntrack_pptp_net_exit(). The former shutdowns and frees GRE piece of netns, however the latter absolutely needs it to flush keymap. Oops is inevitable. Switch to shiny new register_pernet_gen_subsys() to get correct ordering in netns ops list. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Alexey Dobriyan authored
netns ops which are registered with register_pernet_gen_device() are shutdown strictly before those which are registered with register_pernet_subsys(). Sometimes this leads to opposite (read: buggy) shutdown ordering between two modules. Add register_pernet_gen_subsys()/unregister_pernet_gen_subsys() for modules which aren't elite enough for entry in struct net, and which can't use register_pernet_gen_device(). PPTP conntracking module is such one. Signed-off-by:
-
Randy Dunlap authored
Remove excess kernel-doc function parameters from networking header & driver files: Warning(include/net/sock.h:946): Excess function parameter or struct member 'sk' description in 'sk_filter_release' Warning(include/linux/netdevice.h:1545): Excess function parameter or struct member 'cpu' description in 'netif_tx_lock' Warning(drivers/net/wan/z85230.c:712): Excess function parameter or struct member 'regs' description in 'z8530_interrupt' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
David S. Miller authored
-
-
David S. Miller authored
Move SKB trim before we lookup the socket so we don't have to put it on failure. Based upon an initial patch by Jarek Poplawski and suggestions from Herbert Xu. Signed-off-by: -
Trent Piepho authored
The link may be up already via the chip's reset strapping, or though action of U-Boot, or from the last time the interface was brought up. Resetting the link causes it to go down for several seconds. This can significantly increase the time from power-on to DHCP completion and a device being accessible to the network. Signed-off-by:
Trent Piepho <tpiepho@freescale.com> Acked-by:
Andy Fleming <afleming@freescale.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Trent Piepho authored
The init_phy() function attaches to the PHY, then configures the SerDes<->TBI link (in SGMII mode). The TBI is on the MDIO bus with the PHY (sort of) and is accessed via the gianfar's MDIO registers, using the functions gfar_local_mdio_read/write(), which don't do any locking. The previously attached PHY will start a work-queue on a timer, and probably an irq handler as well, which will talk to the PHY and thus use the MDIO bus. This uses phy_read/write(), which have locking, but not against the gfar_local_mdio versions. The result is that PHY code will try to use the MDIO bus at the same time as the SerDes setup code, corrupting the transfers. Setting up the SerDes before attaching to the PHY will insure that there is no race between the SerDes code and *our* PHY, but doesn't fix everything. Typically the PHYs for all gianfar devices are on the same MDIO bus, which is associated with the first gianfar device. This means that the first gianfar's SerDes code could corrupt the MDIO transfers for a different gianfar's PHY. The lock used by phy_read/write() is contained in the mii_bus structure, which is pointed to by the PHY. This is difficult to access from the gianfar drivers, as there is no link between a gianfar device and the mii_bus which shares the same MDIO registers. As far as the device layer and drivers are concerned they are two unrelated devices (which happen to share registers). Generally all gianfar devices' PHYs will be on the bus associated with the first gianfar. But this might not be the case, so simply locking the gianfar's PHY's mii bus might not lock the mii bus that the SerDes setup code is going to use. We solve this by having the code that creates the gianfar platform device look in the device tree for an mdio device that shares the gianfar's registers. If one is found the ID of its platform device is saved in the gianfar's platform data. A new function in the gianfar mii code, gfar_get_miibus(), can use the bus ID to search through the platform devices for a gianfar_mdio device with the right ID. The platform device's driver data is the mii_bus structure, which the SerDes setup code can use to lock the current bus. Signed-off-by:
-
Arjan van de Ven authored
Use the newly introduced pci_ioremap_bar() function in drivers/net. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Atsushi Nemoto authored
Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Divy Le Ray authored
Implement ethtool's get_flags and set_flags methods. It enables ethtool to control the LRO settings. Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Rafael J. Wysocki authored
Adapt the e100 driver to the reworked PCI PM * Use the observation that it is sufficient to call pci_enable_wake() once, unless it fails Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Tested-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Rafael J. Wysocki authored
Adapt the skge driver to the reworked PCI PM * Use device_set_wakeup_enable() and friends as needed * Remove an open-coded reference to the standard PCI PM registers * Use pci_prepare_to_sleep() and pci_back_from_sleep() in the ->suspend() and ->resume() callbacks * Use the observation that it is sufficient to call pci_enable_wake() once, unless it fails Tested on Asus L5D (Yukon-Lite rev 7). Signed-off-by:
-
David Brownell authored
When the at91_ether driver is using a GPIO for its PHY interrupt, be sure to request (and later, if needed, free) that GPIO. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Chunbo Luo authored
Acoording commit aa24886e, dma_free_coherent() need irqs enabled. This patch fix following warning messages: WARNING: at linux/arch/x86/kernel/pci-dma.c:376 dma_free_coherent+0xaa/0xb0() Call Trace: [<ffffffff8023f80f>] warn_on_slowpath+0x5f/0x90 [<ffffffff80496ffa>] ? __kfree_skb+0x3a/0xa0 [<ffffffff802a4723>] ? discard_slab+0x23/0x40 [<ffffffff8021274a>] dma_free_coherent+0xaa/0xb0 [<ffffffff8043668f>] amd8111e_close+0x10f/0x1b0 [<ffffffff8049f3ae>] dev_close+0x5e/0xb0 [<ffffffff8049efa1>] dev_change_flags+0xa1/0x1e0 [<ffffffff806b2171>] ic_close_devs+0x36/0x4e [<ffffffff806b29ee>] ip_auto_config+0x581/0x10f3 [<ffffffff803a6e19>] ? kobject_add+0x69/0x90 [<ffffffff803a698a>] ? kobject_get+0x1a/0x30 [<ffffffff803a785b>] ? kobject_uevent+0xb/0x10 [<ffffffff803a6c62>] ? kset_register+0x52/0x60 [<ffffffff803a6f9b>] ? kset_create_and_add+0x6b/0xa0 [<ffffffff804e2e74>] ? tcp_ca_find+0x24/0x50 [<ffffffff806b246d>] ? ip_auto_config+0x0/0x10f3 [<ffffffff8020903c>] _stext+0x3c/0x150 [<ffffffff802772d3>] ? register_irq_proc+0xd3/0xf0 [<ffffffff802f0000>] ? mb_cache_create+0x80/0x1f0 [<ffffffff80688693>] kernel_init+0x141/0x1b8 [<ffffffff80688552>] ? kernel_init+0x0/0x1b8 [<ffffffff8020d609>] child_rip+0xa/0x11 [<ffffffff80688552>] ? kernel_init+0x0/0x1b8 [<ffffffff80688552>] ? kernel_init+0x0/0x1b8 [<ffffffff8020d5ff>] ? child_rip+0x0/0x11 Signed-off-by:
Chunbo Luo <chunbo.luo@windriver.com> Signed-off-by:
-
