Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* 'nouveau/drm-nouveau-next' of ../drm-nouveau-next: (93 commits)
  drm/nv50: fix a couple of vm init issues
  drm/nv04-nv40: Fix up PCI(E) GART DMA object bus address calculation.
  drm/nouveau: kick vram functions out into an "engine"
  drm/nouveau: allow gpuobj vinst to be a virtual address when necessary
  drm/nv50: tidy up PCIEGART implementation
  drm/nv50: enable non-contig vram allocations where requested
  drm/nv50: enable 4KiB pages for small vram allocations
  drm/nv50: implement global channel address space on new VM code
  drm/nv50: implement BAR1/BAR3 management on top of new VM code
  drm/nv50: import new vm code
  drm/nv50: implement custom vram mm
  drm/nouveau: Avoid potential race between nouveau_fence_update() and context takedown.
  drm/nouveau: fix use of drm_mm_node in semaphore object
  drm/nouveau: wrap calls to ttm_bo_validate()
  drm/nouveau: no need to zero dma objects, we fill them completely anyway
  drm/nouveau: introduce a util function to wait on reg != val
  drm/nouveau: implicitly insert non-DMA objects into RAMHT
  drm/nouveau: make fifo.create_context() responsible for mapping control regs
  drm/nouveau: Spin for a bit in nouveau_fence_wait() before yielding the CPU.
  drm/nouveau: Use WC memory on the AGP GART.
  ...

Drivers using their own implementation of io_mem_reserve/io_mem_free are
likely to store the tracking information for the map in mem.mm_node, so
it can't be freed while still mapped.

Signed-off-by: Ben Skeggs<bskeggs@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

this adds a bo create, and fence seq tracking tracepoints.

This is just an initial set to play around with, we should investigate
what others we need would be useful.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fixes overwriting the first page table entry when testing that the PRAMIN
BAR can be correctly read/written, and adds an additional bar flush after
poking the BAR3 control regs.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Add frame buffer compression on Sandybridge. The method is similar to
Ironlake, except that two new registers of type GTTMMADR must be written
with the right fence info.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Add the support of memory self-refresh on Sandybridge, which is now
support 3 levels of watermarks and the source of the latency values
for watermarks has changed.

On Sandybridge, the LP0 WM value is not hardcoded any more. All the
latency value is now should be extracted from MCHBAR SSKPD register.
And the MCHBAR base address is changed, too.

For the WM values, if any calculated watermark values is larger than
the maximum value that can be programmed into the associated watermark
register, that watermark must be disabled.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
[ickle: remove duplicate compute routines and fixup for checkpatch]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Be paranoid and ensure that the vblank has passed and the scanout has
switched to the new fb, before unpinning the old one and possibly
tearing down its PTEs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Restore PIPE_CONTROL once again just for Ironlake, as it appears that
MI_USER_INTERRUPT does not have the same coherency guarantees, that is
on Ironlake the interrupt following a GPU write is not guaranteed to
arrive after the write is coherent from the CPU, as it does on the
other generations.
Reported-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reported-by: Shuang He <shuang.he@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32402Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

As we already know the limits for the hardware clock, pass it down
rather than recomputing them for each match.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32288Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

In order to enforce the correct memory barriers for irq get/put, we need
to perform the actual counting using atomic operations.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

This fixes regression from a6963596,
that missed to set cached memory type in GTT entry.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

BIOSes. Can't live without them (apparently), definitely can't live with
them.
Reported-by: Ben Gamari <bgamari@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=24312Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Once we have read the value out of the GT power well, we need to remove
the FORCE WAKE bit to allow the system to auto-power down.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Required for my pineview system to not barf after resuming.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

As suggested by Daniel Vetter, this is a safeguard should any of the
registers cause reference to PTE entries.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

So we can remove the repeated initialisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

As we provide a list of all objects that will be accessed from the
batchbuffer, we can build a lut of the handles associated with those
objects for this invocation and use that to avoid the overhead of
looking up those objects again for every relocation.

The cost of building and searching a small hash table is much less than
that of acquiring a spinlock, searching a radix tree and manipulating an
atomic refcnt per relocation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

Don't post a downclocking task if the device is still active when the
idle timer fires. A pathological process could queue up several seconds
worth of processing and then go to sleep, during which time the idle
timer would kick in and downclock the GPU.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

If the tail advances beyond the autoreport HEAD value, then we need to
fallback to an uncached read of the HEAD register in order to ascertain
the correct amount of remaining space in the ringbuffer.
Reported-by: Fang, Xun <xunx.fang@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32259Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

The DisplayPort standard (1.1a) states that:
  The I2C-over-AUX Reply field is valid only when Native AUX CH Reply
  field is AUX_ACK (00). When Native AUX CH Reply field is not 00, then,
  I2C-over-AUX Reply field must be 00 and be ignored.

This fixes broken EDID reading when using an active DisplayPort to
duallink DVI converter.  If the AUX CH replier chooses to defer the
transaction, a short read occurs and erroneous data is returned as
the i2c reply due to a lack of length checking and failure to check
for AUX ACK.

As a result, broken EDIDs can look like:
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
00: bc bc bc ff bc bc bc ff bc bc bc ac bc bc bc 45    ???.???.???????E
10: bc bc bc 10 bc bc bc 34 bc bc bc ee bc bc bc 4c    ???????4???????L
20: bc bc bc 50 bc bc bc 00 bc bc bc 40 bc bc bc 00    ???P???.???@???.
30: bc bc bc 01 bc bc bc 01 bc bc bc a0 bc bc bc 40    ???????????????@
40: bc bc bc 00 bc bc bc 00 bc bc bc 00 bc bc bc 55    ???.???.???.???U
50: bc bc bc 35 bc bc bc 31 bc bc bc 20 bc bc bc fc    ???5???1??? ????
60: bc bc bc 4c bc bc bc 34 bc bc bc 46 bc bc bc 00    ???L???4???F???.
70: bc bc bc 38 bc bc bc 11 bc bc bc 20 bc bc bc 20    ???8??????? ???
80: bc bc bc ff bc bc bc ff bc bc bc ff bc bc bc ff    ???.???.???.???.
...

which can lead to:
[drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>30 30 30 30 30 30 30 32 38 32 30 32 63 63 31 61  000000028202cc1a
<3>28 00 02 8c 00 00 00 00 18 00 00 00 00 00 00 00  (...............
<3>20 4c 61 73 74 20 62 65 61 63 6f 6e 3a 20 33 32   Last beacon: 32
<3>32 30 6d 73 20 61 67 6f 46 00 05 8c 00 00 00 00  20ms agoF.......
<3>36 00 00 00 00 00 00 00 00 0c 57 69 2d 46 69 20  6.........Wi-Fi
<3>52 6f 75 74 65 72 01 08 82 84 8b 96 24 30 48 6c  Router......$0Hl
<3>03 01 01 06 02 00 00 2a 01 00 2f 01 00 32 04 0c  .......*../..2..
<3>12 18 60 dd 09 00 10 18 02 00 00 01 00 00 18 00  ..`.............
Signed-off-by: David Flynn <davidf@rd.bbc.co.uk>
[ickle: fix up some surrounding checkpatch warnings]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

Merge branches 'x86-fixes-for-linus', 'perf-fixes-for-linus' and 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/pvclock: Zero last_value on resume

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf record: Fix eternal wait for stillborn child
  perf header: Don't assume there's no attr info if no sample ids is provided
  perf symbols: Figure out start address of kernel map from kallsyms
  perf symbols: Fix kallsyms kernel/module map splitting

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  nohz: Fix printk_needs_cpu() return value on offline cpus
  printk: Fix wake_up_klogd() vs cpu hotplug

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: i915 cannot provide switcher services.
  drm/radeon/kms: fix vram base calculation on rs780/rs880
  drm/radeon/kms: fix formatting of vram and gtt info
  drm/radeon/kms: forbid big bo allocation (fdo 31708) v3
  drm: Don't try and disable an encoder that was never enabled
  drm: Add missing drm_vblank_put() along queue vblank error path
  drm/i915/dp: Only apply the workaround if the select is still active
  drm/i915: Emit a request to clear a flushed and idle ring for unbusy bo
  drm/i915/lvds: Always restore panel-fitter when enabling the LVDS
  drm/i915/ringbuffer: Only print an error on the second attempt to reset head
  drm/i915: announce to userspace that the bsd ring is coherent
  agp/intel: Fix wrong kunmap in i830_cleanup()
  drm/i915: Factor in pixel-repeat in FDI M/N calculation
  drm/i915: Death to the unnecessary 64bit divide
  drm/i915: Clean conflicting modesetting registers upon init
  drm/i915: Apply a workaround for transitioning from DP on pipe B to HDMI.
  drm/i915: Always set the DP transcoder config to 8BPC.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - add new Bamboo PT (0xdb)
  Input: add input driver for polled GPIO buttons
  Input: turbografx - fix reference counting
  Input: synaptics - fix handling of 2-button ClickPads
  Input: wacom - add IDs for two new Bamboo PTs
  Input: document struct input_absinfo
  Input: add keycodes for touchpad on/off keys
  Input: usbtouchscreen - add support for LG Flatron T1710B

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

it has a DSM but the switcher is done via WMI.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Adds new Bamboo Pen & Touch model - Bamboo P & T Special Edition
Medium (CTH661/L; Product ID = 0xdb).
Tested-by: Tobias Verbeke <tobias.verbeke@gmail.com>
Signed-off-by: David Foley <favux.is@gmail.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

NVC0 will be able to share some of nv50's paths this way.  This also makes
it the card-specific vram code responsible for deciding if a given set
of tile_flags is valid, rather than duplicating the allowed types in
nv50_vram.c and nouveau_gem.c
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

As of this commit, it's guaranteed that if an object is in VRAM that its
GPU virtual address will be constant.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>