- 04 Nov, 2019 1 commit
-
-
Tiezhu Yang authored
When call function hwmon_device_register failed, use the actual return value instead of always -ENOMEM. Fixes: 64f09aa9 ("MIPS: Loongson-3: Add CPU Hwmon platform driver") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
- 01 Nov, 2019 10 commits
-
-
Thomas Bogendoerfer authored
This changeset adds support for SGI Octane/Octane2 workstations. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Thomas Bogendoerfer authored
All platforms using pci-xtalk-bridge can share common phys_to_dma/ dma_to_phys function. So we move it form ip27 specific file to pci-xtalk-bridge.c Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Paul Burton authored
Pull in mips-fixes primarily to gain build fixes in order to allow better testing of mips-next. A few MIPS fixes: - Fix VDSO time-related function behavior for systems where we need to fall back to syscalls, but were instead returning bogus results. - A fix to TLB exception handlers for Cavium Octeon systems where they would inadvertently clobber the $1/$at register. - A build fix for bcm63xx configurations. - Switch to using my @kernel.org email address. Signed-off-by: Paul Burton <paulburton@kernel.org>
-
Tiezhu Yang authored
When I update kernel with loongson3_defconfig based on the Loongson 3A3000 platform, then using dmesg command to show kernel ring buffer, the initial kernel messages have disappeared due to the log buffer is too small, it is better to change the kernel log buffer size from 16KB to 128KB which is enough to save the boot messages. Since the default LOG_BUF_SHIFT value is 17, the default kernel log buffer size is 128KB, just delete the CONFIG_LOG_BUF_SHIFT line. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: paul.burton@mips.com Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: chenhc@lemote.com Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Thomas Bogendoerfer authored
MAX_COMPACT_NODE is a leftover from the compact node implementation, which is removed now. Use MAX_NUMNODES instead. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Paul Menzel authored
Fixes: 5b3b1688 ("MIPS: Add Cavium OCTEON processor support files to arch/mips/cavium-octeon.") Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org
-
Jiaxun Yang authored
Current Loongson-3 code can share among all Loongson64 processors. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: chenhc@lemote.com Cc: paul.burton@mips.com
-
Jiaxun Yang authored
Clean up legacy code after stripping out Loongson2ef code. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: paul.burton@mips.com
-
Jiaxun Yang authored
Remove unrelevent macros, defines and codes from loongson2ef mach. Also rename some defines to match new naming. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: paul.burton@mips.com
-
Jiaxun Yang authored
As later model of GSx64 family processors including 2-series-soc have similar design with initial loongson3a while loongson2e/f seems less identical, we separate loongson2e/f support code out of mach-loongson64 to make our life easier. This patch contains mostly file moving works. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> [paulburton@kernel.org: Squash in the MAINTAINERS updates] Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: paul.burton@mips.com
-
- 31 Oct, 2019 1 commit
-
-
Jiaxun Yang authored
CPU_LOONGSON2 -> CPU_LOONGSON2EF CPU_LOONGSON3 -> CPU_LOONGSON64 As newer loongson-2 products (2G/2H/2K1000) can share kernel implementation with loongson-3 while 2E/2F are less similar with other LOONGSON64 products. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: chenhc@lemote.com Cc: paul.burton@mips.com
-
- 24 Oct, 2019 9 commits
-
-
Thomas Bogendoerfer authored
asm/sgi/sgi.h is unused, time to remove it. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Paul Burton authored
build_restore_pagemask() will restore the value of register $1/$at when its restore_scratch argument is non-zero, and aims to do so by filling a branch delay slot. Commit 0b24cae4 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") added an EHB instruction (Execution Hazard Barrier) prior to restoring $1 from a KScratch register, in order to resolve a hazard that can result in stale values of the KScratch register being observed. In particular, P-class CPUs from MIPS with out of order execution pipelines such as the P5600 & P6600 are affected. Unfortunately this EHB instruction was inserted in the branch delay slot causing the MFC0 instruction which performs the restoration to no longer execute along with the branch. The result is that the $1 register isn't actually restored, ie. the TLB refill exception handler clobbers it - which is exactly the problem the EHB is meant to avoid for the P-class CPUs. Similarly build_get_pgd_vmalloc() will restore the value of $1/$at when its mode argument equals refill_scratch, and suffers from the same problem. Fix this by in both cases moving the EHB earlier in the emitted code. There's no reason it needs to immediately precede the MFC0 - it simply needs to be between the MTC0 & MFC0. This bug only affects Cavium Octeon systems which use build_fast_tlb_refill_handler(). Signed-off-by: Paul Burton <paulburton@kernel.org> Fixes: 0b24cae4 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") Cc: Dmitry Korotin <dkorotin@wavecomp.com> Cc: stable@vger.kernel.org # v3.15+ Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Thomas Bogendoerfer authored
IP27 uses ARC prom only for parsing prom arguments and has a hack for IP27 to make the ARC code behave. By introducing config symbol ARC_CMDLINE_ONLY IP27 only drags in ARC cmdline parsing and does everything else in IP27 specific code. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Thomas Bogendoerfer authored
prom_argc and prom_argv are only used by prom_init_cmdline(), so we could pass them directly as function argument. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Thomas Bogendoerfer authored
remove unused _prom_envp and prom_argc macro. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Thomas Bogendoerfer authored
Calling register_smp_ops() in plat_mem_setup() is still early enough. So by doing this we could remove the ugly #ifdef CONFIG_SGI_IP27 in fw/arc/init.c. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Thomas Bogendoerfer authored
IP27 code has a few externs distributed over .c files. Collect them together into one commcon header file. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
-
Jonas Gorski authored
The vectors span more than one byte, so mark them as arrays. Fixes the following build error when building when using GCC 8.3: In file included from ./include/linux/string.h:19, from ./include/linux/bitmap.h:9, from ./include/linux/cpumask.h:12, from ./arch/mips/include/asm/processor.h:15, from ./arch/mips/include/asm/thread_info.h:16, from ./include/linux/thread_info.h:38, from ./include/asm-generic/preempt.h:5, from ./arch/mips/include/generated/asm/preempt.h:1, from ./include/linux/preempt.h:81, from ./include/linux/spinlock.h:51, from ./include/linux/mmzone.h:8, from ./include/linux/bootmem.h:8, from arch/mips/bcm63xx/prom.c:10: arch/mips/bcm63xx/prom.c: In function 'prom_init': ./arch/mips/include/asm/string.h:162:11: error: '__builtin_memcpy' forming offset [2, 32] is out of the bounds [0, 1] of object 'bmips_smp_movevec' with type 'char' [-Werror=array-bounds] __ret = __builtin_memcpy((dst), (src), __len); \ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/mips/bcm63xx/prom.c:97:3: note: in expansion of macro 'memcpy' memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20); ^~~~~~ In file included from arch/mips/bcm63xx/prom.c:14: ./arch/mips/include/asm/bmips.h:80:13: note: 'bmips_smp_movevec' declared here extern char bmips_smp_movevec; Fixes: 18a1eef9 ("MIPS: BMIPS: Introduce bmips.h") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org>
-
Rikard Falkeborn authored
Arguments are supposed to be ordered high then low. Fixes: 6a6f9b7d ("MIPS: Loongson: Add CFUCFG&CSR support") Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: chenhuacai@gmail.com Cc: jhogan@kernel.org Cc: jiaxun.yang@flygoat.com Cc: linux-mips@linux-mips.org Cc: linux-mips@vger.kernel.org Cc: paul.burton@mips.com Cc: ralf@linux-mips.org Cc: wuzhangjin@gmail.com Cc: zhangfx@lemote.com
-
- 18 Oct, 2019 2 commits
-
-
Vincenzo Frascino authored
On some MIPS variants (e.g. MIPS r1), vDSO clock_mode is set to VDSO_CLOCK_NONE. When VDSO_CLOCK_NONE is set the expected kernel behavior is to fallback on syscalls. To do that the generic vDSO library expects UULONG_MAX as return value of __arch_get_hw_counter(). Fix __arch_get_hw_counter() on MIPS defining a __VDSO_USE_SYSCALL case that addressed the described scenario. Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Tested-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-mips@vger.kernel.org
-
Paul Burton authored
Switch to using my paulburton@kernel.org email address in order to avoid subject mangling that's being imposed on my previous address. Signed-off-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Paul Burton <paulburton@kernel.org> Cc: linux-kernel@vger.kernel.org
-
- 13 Oct, 2019 16 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "A few tracing fixes: - Remove lockdown from tracefs itself and moved it to the trace directory. Have the open functions there do the lockdown checks. - Fix a few races with opening an instance file and the instance being deleted (Discovered during the lockdown updates). Kept separate from the clean up code such that they can be backported to stable easier. - Clean up and consolidated the checks done when opening a trace file, as there were multiple checks that need to be done, and it did not make sense having them done in each open instance. - Fix a regression in the record mcount code. - Small hw_lat detector tracer fixes. - A trace_pipe read fix due to not initializing trace_seq" * tag 'trace-v5.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Initialize iter->seq after zeroing in tracing_read_pipe() tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency tracing/hwlat: Report total time spent in all NMIs during the sample recordmcount: Fix nop_mcount() function tracing: Do not create tracefs files if tracefs lockdown is in effect tracing: Add locked_down checks to the open calls of files created for tracefs tracing: Add tracing_check_open_get_tr() tracing: Have trace events system open call tracing_open_generic_tr() tracing: Get trace_array reference for available_tracers files ftrace: Get a reference counter for the trace_array on filter files tracefs: Revert ccbd54ff ("tracefs: Restrict tracefs when the kernel is locked down")
-
Linus Torvalds authored
Merge tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Update/fix inspur-ipsps1 and k10temp Documentation - Fix nct7904 driver - Fix HWMON_P_MIN_ALARM mask in hwmon core * tag 'hwmon-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: docs: Extend inspur-ipsps1 title underline hwmon: (nct7904) Add array fan_alarm and vsen_alarm to store the alarms in nct7904_data struct. docs: hwmon: Include 'inspur-ipsps1.rst' into docs hwmon: Fix HWMON_P_MIN_ALARM mask hwmon: (k10temp) Update documentation and add temp2_input info hwmon: (nct7904) Fix the incorrect value of vsen_mask in nct7904_data struct
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD fixes from Richard Weinberger: "Two fixes for MTD: - spi-nor: Fix for a regression in write_sr() - rawnand: Regression fix for the au1550nd driver" * tag 'fixes-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: au1550nd: Fix au_read_buf16() prototype mtd: spi-nor: Fix direction of the write_sr() transfer
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fix from Jens Axboe: "Single small fix for a regression in the sequence logic for linked commands" * tag 'for-linus-20191012' of git://git.kernel.dk/linux-block: io_uring: fix sequence logic for timeout requests
-
Petr Mladek authored
A customer reported the following softlockup: [899688.160002] NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [test.sh:16464] [899688.160002] CPU: 0 PID: 16464 Comm: test.sh Not tainted 4.12.14-6.23-azure #1 SLE12-SP4 [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] Kernel panic - not syncing: softlockup: hung tasks [899688.160002] RIP: 0010:up_write+0x1a/0x30 [899688.160002] RSP: 0018:ffffa86784d4fde8 EFLAGS: 00000257 ORIG_RAX: ffffffffffffff12 [899688.160002] RAX: ffffffff970fea00 RBX: 0000000000000001 RCX: 0000000000000000 [899688.160002] RDX: ffffffff00000001 RSI: 0000000000000080 RDI: ffffffff970fea00 [899688.160002] RBP: ffffffffffffffff R08: ffffffffffffffff R09: 0000000000000000 [899688.160002] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b59014720d8 [899688.160002] R13: ffff8b59014720c0 R14: ffff8b5901471090 R15: ffff8b5901470000 [899688.160002] tracing_read_pipe+0x336/0x3c0 [899688.160002] __vfs_read+0x26/0x140 [899688.160002] vfs_read+0x87/0x130 [899688.160002] SyS_read+0x42/0x90 [899688.160002] do_syscall_64+0x74/0x160 It caught the process in the middle of trace_access_unlock(). There is no loop. So, it must be looping in the caller tracing_read_pipe() via the "waitagain" label. Crashdump analyze uncovered that iter->seq was completely zeroed at this point, including iter->seq.seq.size. It means that print_trace_line() was never able to print anything and there was no forward progress. The culprit seems to be in the code: /* reset all but tr, trace, and overruns */ memset(&iter->seq, 0, sizeof(struct trace_iterator) - offsetof(struct trace_iterator, seq)); It was added by the commit 53d0aa77 ("ftrace: add logic to record overruns"). It was v2.6.27-rc1. It was the time when iter->seq looked like: struct trace_seq { unsigned char buffer[PAGE_SIZE]; unsigned int len; }; There was no "size" variable and zeroing was perfectly fine. The solution is to reinitialize the structure after or without zeroing. Link: http://lkml.kernel.org/r/20191011142134.11997-1-pmladek@suse.comSigned-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Srivatsa S. Bhat (VMware) authored
max_latency is intended to record the maximum ever observed hardware latency, which may occur in either part of the loop (inner/outer). So we need to also consider the outer-loop sample when updating max_latency. Link: http://lkml.kernel.org/r/157073345463.17189.18124025522664682811.stgit@srivatsa-ubuntu Fixes: e7c15cd8 ("tracing: Added hardware latency tracer") Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Srivatsa S. Bhat (VMware) authored
nmi_total_ts is supposed to record the total time spent in *all* NMIs that occur on the given CPU during the (active portion of the) sampling window. However, the code seems to be overwriting this variable for each NMI, thereby only recording the time spent in the most recent NMI. Fix it by accumulating the duration instead. Link: http://lkml.kernel.org/r/157073343544.17189.13911783866738671133.stgit@srivatsa-ubuntu Fixes: 7b2c8625 ("tracing: Add NMI tracing in hwlat detector") Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The removal of the longjmp code in recordmcount.c mistakenly made the return of make_nop() being negative an exit of nop_mcount(). It should not exit the routine, but instead just not process that part of the code. By exiting with an error code, it would cause the update of recordmcount to fail some files which would fail the build if ftrace function tracing was enabled. Link: http://lkml.kernel.org/r/20191009110538.5909fec6@gandalf.local.homeReported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 3f1df120 ("recordmcount: Rewrite error/success handling") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
If on boot up, lockdown is activated for tracefs, don't even bother creating the files. This can also prevent instances from being created if lockdown is in effect. Link: http://lkml.kernel.org/r/CAHk-=whC6Ji=fWnjh2+eS4b15TnbsS4VPVtvBOwCy1jjEG_JHQ@mail.gmail.comSuggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Added various checks on open tracefs calls to see if tracefs is in lockdown mode, and if so, to return -EPERM. Note, the event format files (which are basically standard on all machines) as well as the enabled_functions file (which shows what is currently being traced) are not lockde down. Perhaps they should be, but it seems counter intuitive to lockdown information to help you know if the system has been modified. Link: http://lkml.kernel.org/r/CAHk-=wj7fGPKUspr579Cii-w_y60PtRaiDgKuxVtBAMK0VNNkA@mail.gmail.comSuggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Currently, most files in the tracefs directory test if tracing_disabled is set. If so, it should return -ENODEV. The tracing_disabled is called when tracing is found to be broken. Originally it was done in case the ring buffer was found to be corrupted, and we wanted to prevent reading it from crashing the kernel. But it's also called if a tracing selftest fails on boot. It's a one way switch. That is, once it is triggered, tracing is disabled until reboot. As most tracefs files can also be used by instances in the tracefs directory, they need to be carefully done. Each instance has a trace_array associated to it, and when the instance is removed, the trace_array is freed. But if an instance is opened with a reference to the trace_array, then it requires looking up the trace_array to get its ref counter (as there could be a race with it being deleted and the open itself). Once it is found, a reference is added to prevent the instance from being removed (and the trace_array associated with it freed). Combine the two checks (tracing_disabled and trace_array_get()) into a single helper function. This will also make it easier to add lockdown to tracefs later. Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.homeSigned-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Instead of having the trace events system open call open code the taking of the trace_array descriptor (with trace_array_get()) and then calling trace_open_generic(), have it use the tracing_open_generic_tr() that does the combination of the two. This requires making tracing_open_generic_tr() global. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
As instances may have different tracers available, we need to look at the trace_array descriptor that shows the list of the available tracers for the instance. But there's a race between opening the file and an admin deleting the instance. The trace_array_get() needs to be called before accessing the trace_array. Cc: stable@vger.kernel.org Fixes: 607e2ea1 ("tracing: Set up infrastructure to allow tracers for instances") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
The ftrace set_ftrace_filter and set_ftrace_notrace files are specific for an instance now. They need to take a reference to the instance otherwise there could be a race between accessing the files and deleting the instance. It wasn't until the :mod: caching where these file operations started referencing the trace_array directly. Cc: stable@vger.kernel.org Fixes: 673feb9d ("ftrace: Add :mod: caching infrastructure to trace_array") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Steven Rostedt (VMware) authored
Running the latest kernel through my "make instances" stress tests, I triggered the following bug (with KASAN and kmemleak enabled): mkdir invoked oom-killer: gfp_mask=0x40cd0(GFP_KERNEL|__GFP_COMP|__GFP_RECLAIMABLE), order=0, oom_score_adj=0 CPU: 1 PID: 2229 Comm: mkdir Not tainted 5.4.0-rc2-test #325 Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014 Call Trace: dump_stack+0x64/0x8c dump_header+0x43/0x3b7 ? trace_hardirqs_on+0x48/0x4a oom_kill_process+0x68/0x2d5 out_of_memory+0x2aa/0x2d0 __alloc_pages_nodemask+0x96d/0xb67 __alloc_pages_node+0x19/0x1e alloc_slab_page+0x17/0x45 new_slab+0xd0/0x234 ___slab_alloc.constprop.86+0x18f/0x336 ? alloc_inode+0x2c/0x74 ? irq_trace+0x12/0x1e ? tracer_hardirqs_off+0x1d/0xd7 ? __slab_alloc.constprop.85+0x21/0x53 __slab_alloc.constprop.85+0x31/0x53 ? __slab_alloc.constprop.85+0x31/0x53 ? alloc_inode+0x2c/0x74 kmem_cache_alloc+0x50/0x179 ? alloc_inode+0x2c/0x74 alloc_inode+0x2c/0x74 new_inode_pseudo+0xf/0x48 new_inode+0x15/0x25 tracefs_get_inode+0x23/0x7c ? lookup_one_len+0x54/0x6c tracefs_create_file+0x53/0x11d trace_create_file+0x15/0x33 event_create_dir+0x2a3/0x34b __trace_add_new_event+0x1c/0x26 event_trace_add_tracer+0x56/0x86 trace_array_create+0x13e/0x1e1 instance_mkdir+0x8/0x17 tracefs_syscall_mkdir+0x39/0x50 ? get_dname+0x31/0x31 vfs_mkdir+0x78/0xa3 do_mkdirat+0x71/0xb0 sys_mkdir+0x19/0x1b do_fast_syscall_32+0xb0/0xed I bisected this down to the addition of the proxy_ops into tracefs for lockdown. It appears that the allocation of the proxy_ops and then freeing it in the destroy_inode callback, is causing havoc with the memory system. Reading the documentation about destroy_inode and talking with Linus about this, this is buggy and wrong. When defining the destroy_inode() method, it is expected that the destroy_inode() will also free the inode, and not just the extra allocations done in the creation of the inode. The faulty commit causes a memory leak of the inode data structure when they are deleted. Instead of allocating the proxy_ops (and then having to free it) the checks should be done by the open functions themselves, and not hack into the tracefs directory. First revert the tracefs updates for locked_down and then later we can add the locked_down checks in the kernel/trace files. Link: http://lkml.kernel.org/r/20191011135458.7399da44@gandalf.local.home Fixes: ccbd54ff ("tracefs: Restrict tracefs when the kernel is locked down") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 12 Oct, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 5.4-rc3. Nothing huge here. Some binder driver fixes (although it is still being discussed if these all fix the reported issues or not, so more might be coming later), some mei device ids and fixes, and a google firmware driver bugfix that fixes a regression, as well as some other tiny fixes. All have been in linux-next with no reported issues" * tag 'char-misc-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: firmware: google: increment VPD key_len properly w1: ds250x: Fix build error without CRC16 virt: vbox: fix memory leak in hgcm_call_preprocess_linaddr binder: Fix comment headers on binder_alloc_prepare_to_free() binder: prevent UAF read in print_binder_transaction_log_entry() misc: fastrpc: prevent memory leak in fastrpc_dma_buf_attach mei: avoid FW version request on Ibex Peak and earlier mei: me: add comet point (lake) LP device ids
-