Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the data structures needed for proper registration
of OMAP5 chips. This patch includes definitions for these chip versions:
. OMAP5430
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the data structures needed for proper registration
of OMAP4 chips. This patch includes definitions for these chip versions:
. OMAP4430
. OMAP4460
. OMAP4470
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch has the common thermal framework support for OMAP
bandgap driver. It includes the zone registration and unregistration,
the cpu cooling and the trip definitions.

The trips definition is essentially one trip for passive cooling
using the generic cpu cooling device and another one for thermal
shutdown. The cpu cooling device is built based on the existing
cpu freq table. The build should be agnostic to omap version,
but relies that cpufreq is up and running by the time the driver
registers the cpu cooling, as it relies on the table walk api
from cpufreq.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the System Control Module, OMAP supplies a voltage reference
and a temperature sensor feature that are gathered in the band
gap voltage and temperature sensor (VBGAPTS) module. The band
gap provides current and voltage reference for its internal
circuits and other analog IP blocks. The analog-to-digital
converter (ADC) produces an output value that is proportional
to the silicon temperature.

This patch provides a platform driver which expose this feature.
It is moduled as a MFD child of the System Control Module core
MFD driver.

This driver provides only APIs to access the device properties,
like temperature, thresholds and update rate.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

-Added pr_fmt.
-Converted printk(KERN_INFO to pr_info
-Removed embedded message prefixes.
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

-Removed unnecessary OOM messages.
-Removed embedded message prefixes.
-Added __func__ to some pr_err messages.
-Converted printk(KERN_ERR to pr_err
-Refactored split printk strings onto a single line
-Removed the space before the '!'.
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Deleted #if 0 blocks
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

the sm7xxfb is a pci device, and should depend on the PCI.
And also if we wont' depend on the PCI sub-system, the following warns
will be triggered,

drivers/staging/sm7xxfb/sm7xxfb.c:1061:1: warning: data definition has no type or storage class [enabled by default]
drivers/staging/sm7xxfb/sm7xxfb.c:1061:1: warning: type defaults to 'int' in declaration of 'module_pci_driver' [-Wimplicit-int]
drivers/staging/sm7xxfb/sm7xxfb.c:1061:1: warning: parameter names (without types) in function declaration [enabled by default]
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Teddy Wang <teddy.wang@siliconmotion.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

following warnings were fixed

drivers/staging/gdm72xx/gdm_qos.c:198: ERROR: "foo* bar" should be "foo *bar"
drivers/staging/gdm72xx/gdm_qos.c:198: ERROR: "foo* bar" should be "foo *bar"
drivers/staging/gdm72xx/gdm_qos.c:244: WARNING: quoted string split across lines
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

in sdio probe function we are doing kmalloc which can be done using kzalloc.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

the event sock check is done at the netlink_init itself.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

we are doing kmalloc and memset, can be done using kzalloc itself.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

return the error of filp_open rather returning -ENOENT.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

using a wrapper around SET_ETHTOOL_OPS macro is not actually required,

remove and use SET_ETHTOOL_OPS directly.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch improves coding style on smtc_alloc_fb_info.

Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch moves pseudo palette into smtcfb_info struct.

Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch keeps smtc_set_timing and sm7xx_set_timing functions closed
to smtcfb_setmode. This change eases reviewing and maintaining this
logic path.

Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sm712_set_timing handles timing for 0x710, 0x712 and 0x720 chips. This
patch renames the name of the function of sm712_set_timing to
sm7xx_set_timing.

Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch keeps code related to sm7xx_vga_setup closed. It is useful to
understand/maintain the logic behind sm7xx_vga_setup with a simple look.

Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch renames sm712vga_setup to sm7xx_vga_setup. sm7xx_vga_setup
process command line options in order to get the vga parameter. This
parameter will be the lookup index to match the right vesa mode. It is
chip independent.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This change of name improves readability on sm712_vga_setup and
smtcfb_pci_probe. It is coherent with the name of vars being used on
code while avoiding the use of extra long lines in functions.

Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patchs renames index var on sm712vga_setup.

Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch renames structs related to vesa modes in order to get more
readable code on sm712vga_setup.

Tested with SM712.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

H Hartley Sweeten's recent series of patches to clean up the rtd520
driver made some of the register accesses harder to understand.  Add a
few comments to provide some clues to the reader.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove a couple unnecessary comments. For aesthetic reasons, add
some whitespace to the boardinfo to improve readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the whitespace of the range tables to avoid the > 80
character lines and the ugly line breaks. Convert a couple of
the RANGE() values into the appropriate {UNI,BIP}_RANGE().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use for_each_pci_dev() instead of open-coding the for loop. Create
local variables for the bus and slot options as well as the thisboard
pointer in order to clarify the code. Consolidate the printk's when
a supported board is not found into one dev_warn message.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor the "find pci device" code out of the attach function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro 'thisboard' relies on a local variable having a specific
name and yeilds a pointer derived from that local variable. Replace
the macro with a local variable where used and use the comedi_board()
helper to get the pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macro 'devpriv' relies on a local variable having a specific
name and yeilds a pointer derived from that local variable. Replace
the macro with a local variable where used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writeb'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. Plus it's just a wrapper around a simple
'writeb'. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro uses the 'devpriv' macro which relies on a local variable
having a specific name. It's also not used. Remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>