Merge tag 'at91-dt3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Merge "Third batch of DT changes for 4.7" from Nicolas Ferre:

- a fix for the VInCo platform: reset gpio specification for Ethernet
- addition of True Random Number Generator (TRNG) for all sama5 platforms
- trivial adjustment of TRNG register map size for at91sam9g45 family

* tag 'at91-dt3' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: dts: at91: sama5d4: add trng node
  ARM: dts: at91: sama5d3: add trng node
  ARM: dts: at91: sama5d2: add trng node
  ARM: dts: at91: at91sam9g45 family: reduce the trng register map size
  ARM: dts: at91: VInCo: fix phy reset gpio flag

Merge tag 'ux500-armsoc-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

Merge "ux500 Devicetree updates for v4.7" from Linus Walleij:

- Use generic include files
- Make accelerometers open drain on the TVK board

* tag 'ux500-armsoc-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: dts: ux500: configure the accelerometers open drain
  ARM: dts: ux500: use the GIC include header
  ARM: dts: ux500: use the GPIO DT header

Merge tag 'imx-dt-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Merge "i.MX device tree updates for 4.7, take 2: from Shawn Guo:

The i.MX device tree updates for 4.7, take 2:
 - Update display clock configuration for imx6q-b850v3 board
 - Use watchdog external reset for imx6q-ba16 board
 - Update operating points settings for i.MX6UL/SX/DL
 - New board support: imx6ul-pico-hobbit and imx6q-marsboard
 - Add SAI audio support for imx6ul-14x14-evk board
 - Enable USB OTG support for M53EVK board
 - A couple of fixes on DTC warnings

* tag 'imx-dt-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: mx5: dts: Enable USB OTG on M53EVK
  ARM: dts: imx6ul-14x14-evk: Add audio support
  ARM: dts: imx6qdl: Remove unneeded unit-addresses
  ARM: dts: imx6: apalis: parallel lcd display support on ixora
  ARM: dts: imx6sx-sdb: Add 198MHz operational point
  ARM: dts: imx28-m28: Remove unneeded partition nodes
  ARM: dts: imx6ul-pico-hobbit: Add initial support
  ARM: dts: imx6: Do not hardcode the CLKO clock
  ARM: dts: imx6: Add dts for Embest MarS Board
  ARM: dts: imx6: fix dtc warnings for ipu endpoints
  ARM: dts: imx6dl: Fix the VDD_ARM_CAP voltage for 396MHz operation
  ARM: dts: imx6sx: Add 198MHz operating point
  ARM: dts: imx6ul: Fix operating points
  ARM: dts: imx6q-ba16: use wdog external reset
  ARM: dts: imx: b450/b650v3: Move ldb_di clk assignment
  ARM: dts: imx6q-b850v3: Update display clock source
  ARM: dts: imx6q-b850v3: Remove ldb panel

Merge "ARM: mediatek: dts updates for v4.7" from Matthias Brugger:

- add pinctrl node for mt2701
- add mt2701 pmic wrapper binding
- add auxadc binding document

* tag 'v4.6-next-dts' of https://github.com/mbgg/linux-mediatek:
  dt-bindings: MediaTek: Add binding document for the AUXADC
  dt-bindings: ARM: Mediatek: add MT2701/7623 string to the PMIC wrapper doc
  arm: dts: Add pinctrl/GPIO/EINT node for mt2701

Merge tag 'sunxi-dt-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt

Merge "Allwinner DT additions for 4.7" from Maxime Ripard:

The usual bunch of changes, mostly:
  * Addition of the SPDIF support
  * Addition of the pre-requisites for the display support
  * New boards: Difrence DIT4350, colorfly e708 q1, Dserve DSRV9703C,
                Polaroid MID2809PXE4, Orange Pi PC, Orange Pi 2

* tag 'sunxi-dt-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (38 commits)
  ARM: dts: sun7i: Enable S/PDIF on the Cubietruck
  ARM: sun5i: Add DRAM gates
  ARM: sun5i: Add TV encoder gate to the DTSI
  ARM: sun5i: dt: Add pll3 and pll7 clocks
  ARM: dts: sun8i: Add dts file for the Orange Pi One SBC
  ARM: sun7i: dt: Enable dram gate 5 (tve0 clock) for simplefb TV output
  ARM: sun4i: dt: Enable dram gate 5 (tve0 clock) for simplefb TV output
  ARM: dts: sun5i-a13-olinuxino-micro: enable USB DRC
  ARM: dts: sun8i: Base Orange Pi Plus dts on the Orange Pi 2 dts
  ARM: dts: sun8i: Orangepi plus gpio keys fixes and improvements
  ARM: dts: sun8i: Add dts for Orange Pi 2 SBC
  ARM: dts: sun8i: Add Orange Pi PC support
  ARM: dts: sun8i: Fix pio nodes Orangepi Plus dts
  ARM: dts: sun7i: Add SPDIF to the Itead Ibox
  ARM: dts: sun4i: Add SPDIF to the Mele A1000
  ARM: dts: sun7i: Add the SPDIF block to the A20
  ARM: dts: sun4i: Add the SPDIF block to the A10
  ARM: dts: sun7i: Add the SPDIF clk to the A20
  ARM: dts: sun4i: Add the SPDIF clk to the A10
  ARM: dts: sun7i: Add SPDIF TX pin to the A20
  ...

Merge tag 'davinci-for-v4.7/dt-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt

Merge "DaVinci DT updates for v4.7 (part 2)" from Sekhar Nori:

Second set of DT updates for DaVinci
adding support for SPI0 and some low
priority fixes for ethernet and interrupt
controller.

* tag 'davinci-for-v4.7/dt-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850: There are 101 interrupts.
  ARM: dts: da850: disable mdio and eth0 in da850.dtsi
  ARM: davinci: da8xx-dt: Add spi0 lookup for clock matching
  ARM: dts: da850: add spi0 to device tree

Merge tag 'v4.7-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "Rockchip dts32 updates for v4.7 - part2" from Heiko Stübner:

This adds the rk3288-miqi as new board, adapts the edp-phy settings
to the binding-change that made it into 4.6, adds rk3288 i2c controller
nodes and moves the rk3288 thermal data into the soc dtsi, as there
really is no need to have that separate file.

* tag 'v4.7-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: move the rk3288 thermal data into rk3288.dtsi
  ARM: dts: rockchip: add MiQi board from mqmaker
  dt-bindings: add vendor-prefix for mqmaker
  ARM: dts: rockchip: move rk3288 edp phy under the GRF
  ARM: dts: rockchip: make rk3288-grf a simple-mfd
  ARM: dts: rockchip: add i2c nodes for RK3228 SoCs

Add node to support SAMA5D4 hardware random number generator.
Signed-off-by: Mike Williams <mike@mikebwilliams.com>
[nicolas.ferre@atmel.com: reduce the register map size]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add node to support SAMA5D3 hardware random number generator.
Signed-off-by: Mike Williams <mike@mikebwilliams.com>
[nicolas.ferre@atmel.com: reduce the register map size]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add node to support SAMA5D2 hardware random number generator.
Signed-off-by: Mike Williams <mike@mikebwilliams.com>
[nicolas.ferre@atmel.com: reduce the register map size]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

No need to map 0x4000 bytes for the TRNG device: reduce it to 0x100.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Configure the two accelerometers sharing GPIO line 82 as:

- Open drain so that they can share the same interrupt line.

Configure the corresponding interrupt pin:

- Trigger on the falling edge since open drain implies that we
  do not actively drive the line high, but we will actively drive
  it low to generate interrupts and then it moves from high to low
  i.e. a falling edge.

- Pulled up so the line will be biased to high unless an IRQ
  is active on any device on the line, and thus it goes high
  again after the interrupt is deasserted.

Cc: linux-iio@vger.kernel.org
Cc: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add USB OTG support to M53EVK instead of just USB gadget.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

imx6ul-14x14-evk has a wm8960 codec connected via SAI2 port.

Add support for it.

Thanks to Petr Kulhavy <brain@jikos.cz> for the hint on initializing
the PLL4 frequency to get a correct MCLK.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The following build warnings are seen when building with 'W=1' option:

Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-1p1@110 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-3p0@120 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-2p5@130 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-vddcore@140 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-vddpu@140 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-vddsoc@140 has a unit name, but no reg property

Fix them by removing the unneeded unit-addresses.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add parallel LCD display support for the EDT ET057090DHU 5.7" LCD TFT
panel.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

imx6sx-sdb has custom operating points entries because it has one
power supply that drives both VDDARM_IN and VDDSOC_IN.

As per the MX6UL datasheet we have the following minimum voltages for
198 MHz operation (after adding the 25mV margin value):
VDDARM_IN = 0.975 V
VDDSOC_IN = 1.175 V

So use 1.175V for the 198MHz operation.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

mtdparts is passed from command line, so there is no need to have a
default partitioning in device-tree.
Suggested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add initial support for imx6ul pico hobbit board.

For information about this board, please visit:
http://www.wandboard.org/images/hobbit/hobbitboard-imx6ul-reva1.pdfSigned-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge tag 'omap-for-v4.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "Part two of device tree changes for omaps for v4.7 merge window" from Tony Lindgren:

- Fix few typos for address-cells and interrupt-names

- Update dra7 voltage rail limits

- Update compatible string for pcf8575 for both nxp and ti prefix

- Add omap5 configuration for gpadc

- Update dra7 for qspi to remove pinmux as it needs to be done by
  the bootloader in isolation. Also update the qspi for 64MHz
  frequency.

- Add support for Baltos ir2110 and ir3220

- Add industrial and commercial grade thermal thresholds for am57xx

* tag 'omap-for-v4.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am57xx-idk: Include Industrial grade  thermal thresholds
  ARM: dts: am57xx-beagle-x15: Include the commercial grade thresholds
  ARM: dts: am57xx: Introduce industrial grade thermal thresholds
  ARM: dts: am57xx: Introduce commercial grade thermal thresholds
  ARM: dts: add DTS for Baltos IR2110
  ARM: dts: add DTS for Baltos IR3220
  ARM: dts: split am335x-baltos-ir5221 into dts and dtsi files
  ARM: dts: dra7x: Support QSPI MODE-0 operation at 64MHz
  ARM: dts: dra7x: Remove QSPI pinmux
  ARM: dts: omap5-board-common: describe gpadc for Palmas
  ARM: dts: twl6030: describe gpadc
  ARM: dts: dra7xx: Fix compatible string for PCF8575 chip
  ARM: dts: AM57xx/DRA7: Update SoC voltage rail limits to match data sheet
  ARM: dts: OMAP36xx: : DT spelling s/#address-cell/#address-cells/
  ARM: dts: omap5-cm-t54: DT spelling s/interrupt-name/interrupt-names/
  ARM: dts: omap5-board-common: DT spelling s/interrupt-name/interrupt-names/

Merge tag 'samsung-dt-exynos-srom-fixup-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Merge "ARM: dts: exynos: Fixup for SROM controller (v4.7)" from Krzysztof Kozlowski:

DeviceTree changes for new SROM controller driver reached mainline
some time ago, before the driver was accepted (due to very late
comments). However, after these late comments, the driver expects
different bindings so we need to fix the DTS.

* tag 'samsung-dt-exynos-srom-fixup-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: change SROM node compatible from generic to model specific

Merge tag 'socfpga_dts_for_v4.7_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

Merge "SoCFPGA DTS update for v4.7, part 2" from Dinh Nguyen:

- Add samtec VIN|ING board

* tag 'socfpga_dts_for_v4.7_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfpga: Add samtec VIN|ING board

am57xx-idk have Industrial grade samples whose thermal
thresholds are different as compared with dra7. Hence correcting the same.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

am57xx-beagle-x15 have commercial grade samples whose
thermal thresholds lower than dra7. Hence correcting the same.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The silicon version ES2.0 onwards are industrial grade samples
and have higher thermal thresholds than commecial grade samples.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The silicon versions which are non ES2.0 are commercial grade silicon
and have lower thermal thresholds.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'samsung-dt-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Merge "Secound round of Samsung Device Tree updates and improvements for v4.7" from Krzysztof Kozlowski:
1. Cleanup regulator bindings on Exynos5420 boards.
2. Support MIC bypass in display path for Exynos5420.
3. Enable PRNG and SSS for all Exynos4 devices.

* tag 'samsung-dt-4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Enable PRNG and SSS for all Exynos4 devices
  ARM: dts: exynos: Add exynos5420-fimd compatible
  ARM: dts: exynos: Remove unsupported s2mps11 regulator bindings from Exynos5420 boards

Merge tag 'renesas-dt2-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Second Round of Renesas ARM Based SoC DT Updates for v4.7" from Simon Horman

* Don't disable referenced optional clocks in DT of R-Car Gen 1 & 2 SoCs

* tag 'renesas-dt2-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: dts: r8a7794: Don't disable referenced optional clocks
  ARM: dts: r8a7793: Don't disable referenced optional clocks
  ARM: dts: r8a7790: Don't disable referenced optional clocks
  ARM: dts: r8a7779: Don't disable referenced optional clocks
  ARM: dts: r8a7778: Don't disable referenced optional clocks

Merge "NXP LPC32xx device tree updates for v4.7" from Vladimir Zapolskiy:

This includes a few functional changes:
* new representation of MIC, SIC1 and SIC2 interrupt controllers,
* disabled by default SPI1, SPI2, SSP0 and SSP1 SPI controllers in
  shared lpc32xx.dtsi file,
* added clock sources for SPI1 and SPI2,
* set default clock rate of HCLK PLL to main osc rate multiplied by 16.

Also there are some non-functional changes:
* flatten board DTS files by exploiting device node labels,
* add 'partitions' device node for NAND SLC / MTD OF,
* correct Atmel vendor prefix to describe on board AT24 EEPROMs,
* rename board DTS files by adding SoC name prefix.

Since now DTS files of LPC32xx boards match "^lpc32[2345]0-" pattern.

* tag 'lpc32xx-dt-4.7' of git://github.com/vzapolskiy/linux-lpc32xx:
  ARM: dts: lpc32xx: phy3250: add SoC name prefix to board dts file
  ARM: dts: lpc32xx: phy3250: add NAND partitions device node
  ARM: dts: lpc32xx: phy3250: avoid extension of device nodes by absolute path
  ARM: dts: lpc32xx: ea3250: add SoC name prefix to board dts file
  ARM: dts: lpc32xx: ea3250: fix Atmel at24 eeprom vendor
  ARM: dts: lpc32xx: ea3250: add NAND partitions device node
  ARM: dts: lpc32xx: ea3250: avoid extension of device nodes by absolute path
  ARM: dts: lpc32xx: reparent SIC1 and SIC2 interrupts from MIC
  dt-bindings: interrupt-controllers: add description of SIC1 and SIC2
  ARM: dts: lpc32xx: disabled ssp0/spi1 & ssp1/spi2 by default
  ARM: dts: phy3250: enable ssp0
  ARM: dts: lpc32xx: add clock properties to spi nodes
  ARM: dts: lpc32xx: set default clock rate of HCLK PLL

Merge tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Merge "Second batch of DT changes for 4.7" from Nicolas Ferre:

- three low priority fixes:
  - sama5d2: one pin definition and dependency with the slow clock for watchdog
  - sama5d4: definition of watchdog IRQ property
- addition of the new shutdown controller to sama5d2 & sama5d2 Xplained

* tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: dts: at91: sama5d2: add slow clock to watchdog node
  ARM: dts: at91: sama5d2: add shutdown controller node
  ARM: dts: at91: sama5d4: add watchdog interrupt property
  ARM: dts: at91: fix typo in sama5d2 PIN_PD24 description

Merge tag 'sti-dt-for-v4.7b-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/dt

Merge "STi DT updates for v4.7 #1" from Maxime Coquelin:

Highlights:
-----------
 - Add CPUFreq support to STiH407 family
 - Add Mailbox nodes to STiH407 family
 - Add RemoteProc nodes to STiH407 family
 - Use 'reserved-memory' for DMA memory on STiH407
 - Use the LPC timer as a clocksource

* tag 'sti-dt-for-v4.7b-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti:
  ARM: dts: STi: STih407: Switch LPC mode from RTC to Clocksource
  ARM: dts: STiH407: Move over to using the 'reserved-memory' API for obtaining DMA memory
  ARM: dts: STiH407: Add nodes for RemoteProc
  ARM: dts: STi: stih407-family: Add nodes for Mailbox
  ARM: dts: STi: STiH407: Provide CPU with a means to look-up Major number
  ARM: dts: STi: STiH407: Link CPU with its voltage supply
  ARM: dts: STi: STiH407: Provide CPU with clocking information
  ARM: dts: STi: STiH407: Provide generic (safe) DVFS configuration

To simplify matching of DTS files of all NXP LPC32xx powered boards by
a file name add 'lpc3250' prefix to PHYTEC PHYCORE-LPC3250 board dts
file.
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

To declare MTD OF partitions NAND controller device node should have
a special 'partitions' subnode, the change removes a debug message
from mtd/ofpart on boot:

  nxp_lpc3220_slc: 'partitions' subnode not found on /ahb/flash@20020000.
  Trying to parse direct subnodes as partitions.
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

The change simplifies layout of PHY3250 board description by
referencing device nodes of LPC32xx controllers by label.

No functional change intended.
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

To simplify matching of DTS files of all NXP LPC32xx powered boards by
a file name add 'lpc3250' prefix to Embedded Artists LPC3250 board dts
file.
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

There is no 'at' hardware vendor defined yet, correct vendor prefix
for Atmel is 'atmel'.
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

To declare MTD OF partitions NAND controller device node should have
a special 'partitions' subnode, the change removes a debug message
from mtd/ofpart on boot:

  nxp_lpc3220_slc: 'partitions' subnode not found on /ahb/flash@20020000.
  Trying to parse direct subnodes as partitions.
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

The change simplifies layout of EA3250 board description by
referencing device nodes of LPC32xx controllers by label.

No functional change intended.
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

The change adds separate device nodes for SIC1 and SIC2 interrupt
controllers and reparents all defined SIC1 and SIC2 interrupt
producers to the correspondent interrupt controller, this is needed to
perform switching to a new LPC32xx MIC/SIC interrupt controller driver.
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>

NXP LPC32xx has three interrupt controllers, namely root Main
Interrupt Controller (MIC) and two supplementary Sub Interrupt
Controllers (SIC1 and SIC2), four interrupt outputs from SIC1 and SIC2
are connected to MIC.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>