- 21 Mar, 2019 16 commits
-
-
Vatsala Narang authored
Add spaces around '+' operator to get rid of checkpatch warning. Signed-off-by:
Vatsala Narang <vatsalanarang@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vatsala Narang authored
Remove unnecessary parentheses after 'address-of' operator Issue found with checkpatch.pl Signed-off-by:
-
Sanjana Sanikommu authored
The last two lines in the function could be compressed into one. Avoid usage of local variable. Issue found with Coccinelle using ret.cocci. Signed-off-by:
Sanjana Sanikommu <sanjana99reddy99@gmail.com> Signed-off-by:
-
Payal Kshirsagar authored
Adjust code to meet the style of “lines should not end with parenthesis”. Signed-off-by:
Payal Kshirsagar <payal.s.kshirsagar.98@gmail.com> Signed-off-by:
-
Sanjana Sanikommu authored
Challenge suggested by coccinelle. Remove unnecessary parathesis around the right hand of assignment using the below script. @@ binary operator op = {==,!=,&&,||,>=,<=,&,|}; expression l, r, t; @@ ( l = (r op t) | l = -( r -) ) Signed-off-by: -
Vatsala Narang authored
Replace all NULL comparisons in the file to get rid of checkpatch warnings Signed-off-by:
-
Branden Bonaby authored
Rename member element dftEpsId to dft_eps_id to avoid camelcase. checkpatch warning: Avoid CamelCase. Signed-off-by:
Branden Bonaby <brandonbonaby94@gmail.com> Signed-off-by:
-
Madhumitha Prabakaran authored
rtw_startbss_cmd can return the result of calling rtw_enqueue_cmd, which can return the result of calling _rtw_enqueue_cmd, but they all have different return types (u8, u32, and sint, respectively). As all of these functions return error codes, change all the return types to int, in preparation for converting these functions to use standard kernel error codes. Also, remove extern from the function declaration to maintain Linux kernel coding style. Issue suggested by Coccinelle. Signed-off-by:
Madhumitha Prabakaran <madhumithabiw@gmail.com> Signed-off-by:
-
Ivan Safonov authored
Local variables pfhdr and prframe always have a same value, so one of them is unnecessary. Signed-off-by:
Ivan Safonov <insafonov@gmail.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Branden Bonaby authored
Add space between two words for better readability in the comments. Signed-off-by:
-
Branden Bonaby authored
Correct malformed SPDX-License-Identifier so that it matches Linux kernel comment coding style. Signed-off-by:
-
George Hilliard authored
This struct does not exist, and when it is looked up in the compatibility tree, it returns null. Remove these nonfunctional lines. Signed-off-by:
George Hilliard <thirtythreeforty@gmail.com> Signed-off-by:
-
Sanjana Sanikommu authored
The last two lines in the function could be compressed into one. Avoid usage of local variable. Signed-off-by:
-
Sanjana Sanikommu authored
Remove comments which are not necessary. Signed-off-by:
-
Ivan Safonov authored
The sequence skb_put(skb); skb_pull(skb); leads to the same result as skb_reserve(skb); but second is a little shorter and clearer. Signed-off-by: -
Sanjana Sanikommu authored
Remove braces around single statement block. Issue found by checkpatch.pl WARNING: braces {} are not necessary for a single statement block Signed-off-by:
-
- 20 Mar, 2019 24 commits
-
-
Michael Straube authored
All defined WFD* in wifi.h are unused in the driver code, so remove them. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Signed-off-by:
-
Wentao Cai authored
Correct SPDX-License-Identifier comment characters to silence checkpatch.pl warning: WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 Signed-off-by:
Wentao Cai <etsai042@gmail.com> Signed-off-by:
-
Ian Abbott authored
The `insn_read` handler for the EEPROM subdevice on M-series boards (`ni_m_series_eeprom_insn_read()`) currently ignores `insn->n` (the number of samples to read) and assumes a single sample is to be read into `data[0]`. Fortunately, the Comedi core ensures that `data[]` has a length of at least 16 so there is no problem with array bounds. The usual Comedi convention for `insn_read` handlers is to read the same channel `insn->n` times into successive elements of `data[]` so let's do that. (Each channel corresponds to a single EEPROM address.) In this case, the data value comes from a local copy of the EEPROM contents. Also, follow the usual Comedi convention and return `insn->n` from the handler to indicate success (although any non-negative value will do). Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
The `insn_read` handler for the EEPROM subdevice on E-series boards (`ni_eeprom_insn_read()`) currently ignores `insn->n` (the number of samples to read) and assumes a single sample is to be read into `data[0]`. Fortunately, the Comedi core ensures that `data[]` has a length of at least 16 so there is no problem with array bounds. The usual Comedi convention for `insn_read` handlers is to read the same channel `insn->n` times into successive elements of `data[]` so let's do that. (Each channel number corresponds to a single EEPROM address.) Since we do not expect the EEPROM data at a particular address to change between readings, let's just read it once and copy the value `insn->n` times. Also, follow the usual Comedi convention and return `insn->n` from the handler to indicate success (although any non-negative value will do). Signed-off-by:
-
Ian Abbott authored
The `insn_read` handler for the calibration subdevice (`ni_calib_insn_read()`) currently ignores `insn->n` (the number of samples to read) and assumes a single sample is to be read into `data[0]`. Fortunately, the Comedi core ensures that `data[]` has a length of at least 16, so there is no problem with array bounds. The usual Comedi convention for `insn_read` handlers is to read the same channel `insn->n` times into successive elements of `data[]`, so let's do that. Also, follow the usual Comedi convention and return `insn->n` from the handler to indicate success (although any non-negative value will do). Signed-off-by:
-
Ian Abbott authored
The `insn_write` handler for the calibration subdevice (`ni_calib_insn_write()`) currently ignores `insn->n` (the number of samples to write) and assumes a single sample is to be written, but `insn->n` could be 0, meaning no samples should be written, in which case `data[0]` is invalid. Change `ni_calib_insn_write()` to only write to the calibration device if `insn->n > 0`. There isn't much point writing all the values when `insn->n > 1`, so just write the last one (`data[insn->n - 1]`). Also follow the usual Comedi convention and return `insn->n` from the handler to indicate success (although any non-negative return value will do as far as the Comedi core is concerned). Signed-off-by:
-
George Hilliard authored
A failure while processing the start command could cause dma_unmap_sg() to be called without first calling dma_map_sg(). Since calling dma_unmap_sg() is only needed when data != NULL, move the unmap call into the corresponding if {} block. Signed-off-by: -
George Hilliard authored
Obvious typo. It is specified as BURST in the datasheet. Signed-off-by:
-
George Hilliard authored
There is no need to delay notifying the mmc layer. Schedule the delayed work to run immediately. Signed-off-by:
-
George Hilliard authored
This is set once during initialization and never changed. Don't bother setting it again in the interrupt handler. Signed-off-by:
-
George Hilliard authored
When waiting on completions, use the _io variant so the caller is charged as using I/O. This should have no effect on the module's functionality, only improve CPU accounting. Signed-off-by:
-
George Hilliard authored
The driver previously grabbed the SD pins for itself, ignoring the pin controller. Remove this, and allow the pinctrl subsystem to set up the pins using the device tree mappings. This allows this driver to work on related devices that have a different pin controller mapping, such as the MT7688. The hardcoded bit index was incorrect on that device. The driver now needs a pin controller reference in its device tree node: sdhci: /* ... */ { compatible = "ralink,mt7620-sdhci"; pinctrl-names = "default"; pinctrl-0 = <&sdhci_pins>; // ... }; This change could break SD controller functionality on existing devices whose device trees do not specify a pin controller and state for the SD node. Signed-off-by: -
George Hilliard authored
These comments don't contain useful code or alternate implementation ideas. Remove them. Signed-off-by:
-
George Hilliard authored
The compiler complains: drivers/staging/mt7621-mmc/dbg.c: In function ‘msdc_debug_proc_write’: drivers/staging/mt7621-mmc/dbg.c:237:12: warning: unused variable ‘size’ [-Wunused-variable] int mode, size; ^~~~ drivers/staging/mt7621-mmc/dbg.c:237:6: warning: unused variable ‘mode’ [-Wunused-variable] int mode, size; ^~~~ Remove these declarations. Signed-off-by: -
Nishka Dasgupta authored
Remove return variable and return return value directly. Issue found by Coccinelle using ret.cocci. Signed-off-by:
Nishka Dasgupta <nishka.dasgupta@yahoo.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Wentao Cai authored
Replace '--help--' in Kconfig and indent the subsequent text to silence checkpatch.pl warning: WARNING: prefer 'help' over '---help---' for new help texts Signed-off-by:
-
Wentao Cai authored
Replace '--help--' in Kconfig and indent the subsequent text to silence checkpatch.pl warning: WARNING: prefer 'help' over '---help---' for new help texts Signed-off-by:
-
Wentao Cai authored
Replace '--help--' in Kconfig and indent the subsequent text to silence checkpatch.pl warning: WARNING: prefer 'help' over '---help---' for new help texts Signed-off-by:
-
Vatsala Narang authored
Edit CamelCase function name Issue found by checkpatch.pl Signed-off-by:
-
Sanjana Sanikommu authored
Fix the spacce around else. Issue found by checkpatch.pl ERROR: spaces required before that open brace '{' ERROR: spaces required before that close brace '}' Signed-off-by: -
Sanjana Sanikommu authored
Replace NULL comparisons in the file. Issue found by checkpatch.pl Signed-off-by:
-
Sanjana Sanikommu authored
Remove unnecessary blank lines. Issue found by checkpatch.pl Signed-off-by:
-
Sanjana Sanikommu authored
Add spaces around the operators. Issue found by checkpatch.pl CHECK: spaces preferred around that '+' CHECK: spaces preferred around that '*' Signed-off-by:
-
Sanjana Sanikommu authored
Ajdust alignment to match open paranthesis. Issue found by checkpatch.pl CHECK: Alignment should match open paranthesis. Signed-off-by:
-
