The interface control register of the 60xx (and later) Marvell chip
requires certain bits to always be set when writing to it.  These bits
incorrectly read-back as zeros, so the pattern must be ORed in
with each write of the register.  Also, bit 12 should NOT be set
(note that Marvell's own driver also had bit-12 wrong here).

While we're at it, we also now do pci_set_master() in the init code.
Signed-off-by: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

In some systems, it is possible that the BIOS may have enabled interrupt coalescing
for the Marvell controllers which support it.  This patch adds code to detect/ack
interrupts from the chip's coalescing (combing) logic.
Signed-off-by: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

The mv_err_intr() function is invoked from the driver's interrupt handler,
as well as from the timeout function.  This patch prevents it from triggering
a one-after-the-other double reset of the controller when invoked
from the timeout function.

This also adds a check for a timeout race condition that has been observed
to occur with this driver in earlier kernels.  This should not be needed,
in theory, but in practice it has caught bugs.  Maybe nuke it at a later date.
Signed-off-by: Mark Lord <liml@rtr.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mthca: Fix posting lists of 256 receive requests for Tavor
  IB/uverbs: Don't leak ref to mm on error path
  IB/srp: Complete correct SCSI commands on device reset
  IB/srp: Get rid of extra scsi_host_put()s if reconnection fails
  IB/srp: Don't wait for disconnection if sending DREQ fails
  IB/mthca: Make fw_cmd_doorbell default to 0

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [SCTP]: Allow linger to abort 1-N style sockets.
  [SCTP]: Validate the parameter length in HB-ACK chunk.
  [SCTP]: Respect the real chunk length when walking parameters.
  [SCTP]: A better solution to fix the race between sctp_peeloff() and
  [SCTP]: Set sk_err so that poll wakes up after a non-blocking connect failure.

* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [ARM] 3531/1: i.MX/MX1 SD/MMC ensure, that clock are stopped before new command and cleanups

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3533/1: Implement the __raw_(read|write)_can_lock functions on ARM
  [ARM] 3530/1: PXA Mainstone: prevent double enable_irq() in pcmcia
  [ARM] 3529/1: s3c24xx: fix restoring control register with undefined instruction

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] s3c2410_wdt.c stop watchdog after boot
  [WATCHDOG] i8xx_tco.c - remove support for ICH6 + ICH7
  [WATCHDOG] Documentation/watchdog/watchdog-api.txt - fix watchdog daemon
  [WATCHDOG] sc1200wdt.c printk fix

Enable SO_LINGER functionality for 1-N style sockets. The socket API
draft will be clarfied to allow for this functionality. The linger
settings will apply to all associations on a given socket.
Signed-off-by: Vladislav Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>

If SCTP receives a badly formatted HB-ACK chunk, it is possible
that we may access invalid memory and potentially have a buffer
overflow.  We should really make sure that the chunk format is
what we expect, before attempting to touch the data.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>

Patch from Catalin Marinas

Recent patches introduced the write_can_lock() call in the kernel/ptrace.c
file. Implement the __raw_* variants on ARM (SMP) as well.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Pavel Pisa

There has been problems that for some paths that clock are not stopped
during new command programming and initiation. Result is issuing
of incorrect command to the card. Some other problems are cleaned too.
Noisy report of known ERRATUM #4 has been suppressed.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

When performing bound checks during the parameter processing, we
want to use the real chunk and paramter lengths for bounds instead
of the rounded ones.  This prevents us from potentially walking of
the end if the chunk length was miscalculated.  We still use rounded
lengths when advancing the pointer. This was found during a
conformance test that changed the chunk length without modifying
parameters.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>

sctp_rcv().

The goal is to hold the ref on the association/endpoint throughout the
state-machine process.  We accomplish like this:

  /* ref on the assoc/ep is taken during lookup */

  if owned_by_user(sk)
 	sctp_add_backlog(skb, sk);
  else
 	inqueue_push(skb, sk);

  /* drop the ref on the assoc/ep */

However, in sctp_add_backlog() we take the ref on assoc/ep and hold it
while the skb is on the backlog queue.  This allows us to get rid of the
sock_hold/sock_put in the lookup routines.

Now sctp_backlog_rcv() needs to account for potential association move.
In the unlikely event that association moved, we need to retest if the
new socket is locked by user.  If we don't this, we may have two packets
racing up the stack toward the same socket and we can't deal with it.
If the new socket is still locked, we'll just add the skb to its backlog
continuing to hold the ref on the association.  This get's rid of the
need to move packets from one backlog to another and it also safe in
case new packets arrive on the same backlog queue.

The last step, is to lock the new socket when we are moving the
association to it.  This is needed in case any new packets arrive on
the association when it moved.  We want these to go to the backlog since
we would like to avoid the race between this new packet and a packet
that may be sitting on the backlog queue of the old socket toward the
same association.
Signed-off-by: Vladislav Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>

Also fix some other cases where sk_err is not set for 1-1 style sockets.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>

flags is a u16, so use htons instead of htonl. Also avoid double
conversion.

Noticed by Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Solar Designer found a race condition in do_add_counters(). The beginning
of paddc is supposed to be the same as tmp which was sanity-checked
above, but it might not be the same in reality. In case the integer
overflow and/or the race condition are triggered, paddc->num_counters
might not match the allocation size for paddc. If the check below
(t->private->number != paddc->num_counters) nevertheless passes (perhaps
this requires the race condition to be triggered), IPT_ENTRY_ITERATE()
would read kernel memory beyond the allocation size, potentially causing
an oops or leaking sensitive data (e.g., passwords from host system or
from another VPS) via counter increments. This requires CAP_NET_ADMIN.
Signed-off-by: Solar Designer <solar@openwall.com>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

GRE keys are 16 bit.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The prefix argument for nf_log_packet is a format specifier,
so don't pass the user defined string directly to it.
Signed-off-by: Philip Craig <philipc@snapgear.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Coverity checker spotted that we may leak 'hold' in
net/ipv4/netfilter/ipt_recent.c::checkentry() when the following
is true:
  if (!curr_table->status_proc) {
    ...
    if(!curr_table) {
    ...
      return 0;  <-- here we leak.
Simply moving an existing vfree(hold); up a bit avoids the possible leak.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we post a list of length 256 exactly, nreq in doorbell gets set to
256 which is wrong: it should be encoded by 0.  This is because we
only zero it out on the next WR, which may not be there.  The solution
is to ring the doorbell after posting a WQE, not before posting the
next one.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

In ib_umem_release_on_close(), if the kmalloc() fails, then a
reference to current->mm will be leaked.  Fix this by adding a mmput()
instead of just returning on kmalloc() failure.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Re-enable posted writes for status FIFO.

Besides bringing back a very minor bandwidth tweak from Linux 2.6.15.x
and older, this also fixes an interoperability regression since 2.6.16:

   http://bugzilla.kernel.org/show_bug.cgi?id=6356
   (sbp2: scsi_add_device failed. IEEE1394 HD is not working anymore.)
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Vanei Heidemann <linux@javanei.com.br>
Tested-by: Martin Putzlocher <mputzi@gmx.de> (chip type unconfirmed)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In case the blacklist with workarounds for device bugs yields a false
positive, the module load parameter can now also be used as an override
instead of an addition to the blacklist.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Apple decided to copy some USB stupidity over to FireWire.

The sector number returned by iPods from read_capacity is one too many.
This may cause I/O errors, especially if the kernel is configured for EFI
partition support. We use the same workaround as usb-storage but have to
check for different model IDs.

	http://marc.theaimsgroup.com/?t=114233262300001
	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187409

Acknowledgements:
  Diagnosis and therapy by Mathieu Chouquet-Stringer <ml2news@free.fr>,
  additional data about affected and unaffected Apple hardware from
  Vladimir Kotal, Sander De Graaf, Bryan Olmstead and Hugh Dixon.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Grand unification of the three types of workarounds we have so far.

The "skip mode page 8" workaround is now limited to devices which
pretend to be of TYPE_DISK instead of TYPE_RBC. This workaround is no
longer enabled for Initio bridges.

Patch update in anticipation of more workarounds:
 - Add module parameter "workarounds".
 - Deprecate parameter "force_inquiry_hack".
 - Compose the blacklist of a compound type for better readability and
   extensibility.
 - Remove a now unused #define.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TCP]: reno sacked_out count fix
  [IPV6]: Endian fix in net/ipv6/netfilter/ip6t_eui64.c:match().
  [TR]: Remove an unused export.
  [IPX]: Correct return type of ipx_map_frame_type().
  [IPX]: Correct argument type of ipxrtr_delete().
  [PKT_SCHED]: Potential jiffy wrap bug in dev_watchdog().

* git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/netdev-2.6:
  sky2: prevent dual port receiver problems
  x86_64: Check for bad dma address in b44 1GB DMA workaround
  The ixp2000 driver for the enp2611 was developed on a board with

* 'upstream-linus' of git://oss.oracle.com/home/sourcebo/git/ocfs2:
  configfs: Make sure configfs_init() is called before consumers.
  configfs: configfs_mkdir() failed to cleanup linkage.
  configfs: Fix a reference leak in configfs_mkdir().
  ocfs2: fix gfp mask in some file system paths
  ocfs2: Don't populate uptodate cache in ocfs2_force_read_journal()
  ocfs2: take meta data lock in ocfs2_file_aio_read()
  ocfs2: take data locks around extend

configfs_init() needs to be called first to register configfs before anyconsumers try to access it.  Move up configfs in fs/Makefile to make
sure it is initialized early.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

If configfs_mkdir() errored in certain ways after the parent<->child
linkage was already created, it would not undo the linkage.  Also,
comment the reference counting for clarity.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

configfs_mkdir() failed to release the working parent reference in most
exit paths.  Also changed the exit path for readability.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

We were using GFP_KERNEL in a handful of places which really wanted
GFP_NOFS. Fix this.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

This greatly reduces the amount of memory useded during recovery.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

Temporarily take the meta data lock in ocfs2_file_aio_read() to allow us to
update our inode fields.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

We need to take a data lock around extends to protect the pages that
ocfs2_zero_extend is going to be pulling into the page cache. Otherwise an
extend on one node might populate the page cache with data pages that have
no lock coverage.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] one-line cleanup on set_irq_affinity_info
  [IA64] fix broken irq affinity
  [IA64] sn2 defconfig

Patch from Thomas Gleixner

The mainstone board pcmcia interrupt have been enabled via setup_irq()
and the following socket check calls enable_irq again. Set the NOAUTOEN flag so the interrupt is not automatically enabled in setup_irq()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

When flushing out queued commands after a successful device reset,
make sure that SRP completes the right commands, instead of calling
scsi_done on the command passed into the device reset handler over and
over.
Signed-off-by: Ishai Rabinovitz <ishai@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

If a reconnection attempt fails, then SRP does two scsi_host_put()s.
This is a historical relic from an earlier version of the driver that
took a reference on the scsi_host before trying to reconnect, so get
rid of the extra scsi_host_put().
Signed-off-by: Roland Dreier <rolandd@cisco.com>