Skip to content

L
linux
Switch branch/tag
  1. 10 Mar, 2019 34 commits
  3. 05 Mar, 2019 6 commits
    • Greg Kroah-Hartman's avatar
      Linux 4.19.27 · adc2a008
      Greg Kroah-Hartman authored
      adc2a008
    • Andy Lutomirski's avatar
      x86/uaccess: Don't leak the AC flag into __put_user() value evaluation · 7371994d
      Andy Lutomirski authored 
      commit 2a418cf3 upstream.

When calling __put_user(foo(), ptr), the __put_user() macro would call
foo() in between __uaccess_begin() and __uaccess_end().  If that code
were buggy, then those bugs would be run without SMAP protection.

Fortunately, there seem to be few instances of the problem in the
kernel. Nevertheless, __put_user() should be fixed to avoid doing this.
Therefore, evaluate __put_user()'s argument before setting AC.

This issue was noticed when an objtool hack by Peter Zijlstra complained
about genregs_get() and I compared the assembly output to the C source.

 [ bp: Massage commit message and fixed up whitespace. ]

Fixes: 11f1a4b9 ("x86: reorganize SMAP handling in user space accesses")
Signed-off-by: default avatarAndy Lutomirski <luto@kernel.org>
Signed-off-by: default avatarBorislav Petkov <bp@suse.de>
Acked-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20190225125231.845656645@infradead.orgSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7371994d
    • Paul Burton's avatar
      MIPS: eBPF: Fix icache flush end address · 9f77e4cb
      Paul Burton authored 
      commit d1a2930d upstream.

The MIPS eBPF JIT calls flush_icache_range() in order to ensure the
icache observes the code that we just wrote. Unfortunately it gets the
end address calculation wrong due to some bad pointer arithmetic.

The struct jit_ctx target field is of type pointer to u32, and as such
adding one to it will increment the address being pointed to by 4 bytes.
Therefore in order to find the address of the end of the code we simply
need to add the number of 4 byte instructions emitted, but we mistakenly
add the number of instructions multiplied by 4. This results in the call
to flush_icache_range() operating on a memory region 4x larger than
intended, which is always wasteful and can cause crashes if we overrun
into an unmapped page.

Fix this by correcting the pointer arithmetic to remove the bogus
multiplication, and use braces to remove the need for a set of brackets
whilst also making it obvious that the target field is a pointer.
Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
Fixes: b6bd53f9 ("MIPS: Add missing file for eBPF JIT.")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9f77e4cb
    • Jonas Gorski's avatar
      MIPS: BCM63XX: provide DMA masks for ethernet devices · 4a418a3d
      Jonas Gorski authored 
      commit 18836b48 upstream.

The switch to the generic dma ops made dma masks mandatory, breaking
devices having them not set. In case of bcm63xx, it broke ethernet with
the following warning when trying to up the device:

[    2.633123] ------------[ cut here ]------------
[    2.637949] WARNING: CPU: 0 PID: 325 at ./include/linux/dma-mapping.h:516 bcm_enetsw_open+0x160/0xbbc
[    2.647423] Modules linked in: gpio_button_hotplug
[    2.652361] CPU: 0 PID: 325 Comm: ip Not tainted 4.19.16 #0
[    2.658080] Stack : 80520000 804cd3ec 00000000 00000000 804ccc00 87085bdc 87d3f9d4 804f9a17
[    2.666707]         8049cf18 00000145 80a942a0 00000204 80ac0000 10008400 87085b90 eb3d5ab7
[    2.675325]         00000000 00000000 80ac0000 000022b0 00000000 00000000 00000007 00000000
[    2.683954]         0000007a 80500000 0013b381 00000000 80000000 00000000 804a1664 80289878
[    2.692572]         00000009 00000204 80ac0000 00000200 00000002 00000000 00000000 80a90000
[    2.701191]         ...
[    2.703701] Call Trace:
[    2.706244] [<8001f3c8>] show_stack+0x58/0x100
[    2.710840] [<800336e4>] __warn+0xe4/0x118
[    2.715049] [<800337d4>] warn_slowpath_null+0x48/0x64
[    2.720237] [<80289878>] bcm_enetsw_open+0x160/0xbbc
[    2.725347] [<802d1d4c>] __dev_open+0xf8/0x16c
[    2.729913] [<802d20cc>] __dev_change_flags+0x100/0x1c4
[    2.735290] [<802d21b8>] dev_change_flags+0x28/0x70
[    2.740326] [<803539e0>] devinet_ioctl+0x310/0x7b0
[    2.745250] [<80355fd8>] inet_ioctl+0x1f8/0x224
[    2.749939] [<802af290>] sock_ioctl+0x30c/0x488
[    2.754632] [<80112b34>] do_vfs_ioctl+0x740/0x7dc
[    2.759459] [<80112c20>] ksys_ioctl+0x50/0x94
[    2.763955] [<800240b8>] syscall_common+0x34/0x58
[    2.768782] ---[ end trace fb1a6b14d74e28b6 ]---
[    2.773544] bcm63xx_enetsw bcm63xx_enetsw.0: cannot allocate rx ring 512

Fix this by adding appropriate DMA masks for the platform devices.

Fixes: f8c55dc6 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms")
Signed-off-by: default avatarJonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4a418a3d
    • Michael Clark's avatar
      MIPS: fix truncation in __cmpxchg_small for short values · 3bfa6413
      Michael Clark authored 
      commit 94ee12b5 upstream.

__cmpxchg_small erroneously uses u8 for load comparison which can
be either char or short. This patch changes the local variable to
u32 which is sufficiently sized, as the loaded value is already
masked and shifted appropriately. Using an integer size avoids
any unnecessary canonicalization from use of non native widths.

This patch is part of a series that adapts the MIPS small word
atomics code for xchg and cmpxchg on short and char to RISC-V.

Cc: RISC-V Patches <patches@groups.riscv.org>
Cc: Linux RISC-V <linux-riscv@lists.infradead.org>
Cc: Linux MIPS <linux-mips@linux-mips.org>
Signed-off-by: default avatarMichael Clark <michaeljclark@mac.com>
[paul.burton@mips.com:
  - Fix varialble typo per Jonas Gorski.
  - Consolidate load variable with other declarations.]
Signed-off-by: default avatarPaul Burton <paul.burton@mips.com>
Fixes: 3ba7f44d ("MIPS: cmpxchg: Implement 1 byte & 2 byte cmpxchg()")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      3bfa6413
    • Mike Kravetz's avatar
      hugetlbfs: fix races and page leaks during migration · 527cabff
      Mike Kravetz authored 
      commit cb6acd01 upstream.

hugetlb pages should only be migrated if they are 'active'.  The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.

When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked.  Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code.  This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.

To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.

Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available.  A program mmaps a 2G file in a hugetlbfs filesystem.  It
then migrates the pages associated with the file from one node to
another.  When the program exits, huge page counts are as follows:

  node0
  1024    free_hugepages
  1024    nr_hugepages

  node1
  0       free_hugepages
  1024    nr_hugepages

  Filesystem                         Size  Used Avail Use% Mounted on
  nodev                              4.0G  2.0G  2.0G  50% /var/opt/hugepool

That is as expected.  2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem.  If the file is then removed, the counts become:

  node0
  1024    free_hugepages
  1024    nr_hugepages

  node1
  1024    free_hugepages
  1024    nr_hugepages

  Filesystem                         Size  Used Avail Use% Mounted on
  nodev                              4.0G  2.0G  2.0G  50% /var/opt/hugepool

Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use.  The only way to 'fix' the filesystem
accounting is to unmount the filesystem

If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field.  At migration
time, this information is not preserved.  To fix, simply transfer
page_private from old to new page at migration time if necessary.

There is a related race with removing a huge page from a file and
migration.  When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page().  A page could be migrated
while in this state.  However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.

To fix that, check for this condition before migrating a huge page.  If
the condition is detected, return EBUSY for the page.

Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222 ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: default avatarMike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
  Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
  Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.comSigned-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      527cabff
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7