The timer and cleanup branches from stericsson conflict,
so I'm merging them here.

Conflicts:
	arch/arm/mach-ux500/Makefile
	arch/arm/mach-ux500/cpu.c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Based on a patch from Arnd Bergmann this fixes up the build
problem of assigning a non-existing global when the ux500 PRCMU
timer is not linked in by passing its base address to the init
function. We also add a missing <linux/errno.h> inclusion and
staticize the dummy function.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The omap_dm_timer_remove function gets discarded when
CONFIG_HOTPLUG is not set, so we must not reference it
unconditionally.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

On ux500 the MTU timer blocks are powered off during
suspend/resume, so these need some reinitialization when
coming back from suspend.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

We make the reset function from the driver public, then
we also move of all register defines from the public header
file into driver, where they belong.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This adds support for a periodic mode in the MTU (Nomadik)
timer clockevent driver. It also include changes needed for
deeper powerstates where MTU block gets powered off.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Just split off the timer code to its own file so we have a
more fine-grained file tree.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This patch adds support for the DBX500 PRCMU clocksource
to ux500 platforms.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.co>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This patch adds the DBX500 PRCMU Timer driver as a clocksource
and as sched_clock.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This patch makes it possible to configure away the sched_clock
part of the MTU timer.

Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add error handling code to export APIs.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Clock is enabled only when timer is started and disabled when the the timer
is stopped. Therefore before accessing registers in functions clock is enabled
and then disabled back at the end of access. Context save is done dynamically
whenever the registers are modified. Context restore is called when context is
lost.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
[tony@atomide.com: updated to use revision instead of tidr]
Signed-off-by: Tony Lindgren <tony@atomide.com>

Pass the reserved flag in pdata and use it. We can
now make sys_timer_reserved static to mach-omap2/timer.c.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add pm_runtime feature to dmtimer whereby *_runtime_get_sync()
is called within omap_dm_timer_enable(), pm_runtime_put()
is called in omap_dm_timer_disable(). In addition to calling
pm_runtime_enable, we are calling pm_runtime_irq_safe so that
they can be called from interrupt context.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Partha Basak <p-basak2@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Cousson, Benoit <b-cousson@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Register timer devices by going through hwmod database using
hwmod API. The driver probes each of the registered devices.
Functionality which are already performed by hwmod framework
are removed from timer code. New set of timers present on
OMAP4 are now supported.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Acked-by: Cousson, Benoit <b-cousson@ti.com>
[tony@atomide.com: folded in spinlock changes, left out is_omap2]
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add dmtimer platform driver functions which include:
(1) platform driver initialization
(2) driver probe function
(3) driver remove function
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Thara Gopinath <thara@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Cousson, Benoit <b-cousson@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add routines to converts dmtimers to platform devices. The device data
is obtained from hwmod database of respective platform and is registered
to device model after successful binding to driver.
In addition, capability attribute of each of the timers is added in
hwmod database.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Thara Gopinath <thara@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Cousson, Benoit <b-cousson@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Convert OMAP1 dmtimers into a platform devices and then registers with
device model framework so that it can be bound to corresponding driver.
Signed-off-by: Thara Gopinath <thara@ti.com>
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Cousson, Benoit <b-cousson@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add device name to OMAP2 dmtimer fclk nodes so that the fclk nodes can be
retrieved by doing a clk_get with the corresponding device pointers or
device names.
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Thara Gopinath <thara@ti.com>
Acked-by: Cousson, Benoit <b-cousson@ti.com>
[tony@atomide.com: fixed typo in email address]
Signed-off-by: Tony Lindgren <tony@atomide.com>

xz_dec_run() could incorrectly return XZ_BUF_ERROR if all of the
following was true:

 - The caller knows how many bytes of output to expect and only provides
   that much output space.

 - When the last output bytes are decoded, the caller-provided input
   buffer ends right before the LZMA2 end of payload marker.  So LZMA2
   won't provide more output anymore, but it won't know it yet and thus
   won't return XZ_STREAM_END yet.

 - A BCJ filter is in use and it hasn't left any unfiltered bytes in the
   temp buffer.  This can happen with any BCJ filter, but in practice
   it's more likely with filters other than the x86 BCJ.

This fixes <https://bugzilla.redhat.com/show_bug.cgi?id=735408> where
Squashfs thinks that a valid file system is corrupt.

This also fixes a similar bug in single-call mode where the uncompressed
size of a block using BCJ + LZMA2 was 0 bytes and caller provided no
output space.  Many empty .xz files don't contain any blocks and thus
don't trigger this bug.

This also tweaks a closely related detail: xz_dec_bcj_run() could call
xz_dec_lzma2_run() to decode into temp buffer when it was known to be
useless.  This was harmless although it wasted a minuscule number of CPU
cycles.
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://github.com/davem330/net: (27 commits)
  xfrm: Perform a replay check after return from async codepaths
  fib:fix BUG_ON in fib_nl_newrule when add new fib rule
  ixgbe: fix possible null buffer error
  tg3: fix VLAN tagging regression
  net: pxa168: Fix build errors by including interrupt.h
  netconsole: switch init_netconsole() to late_initcall
  gianfar: Fix overflow check and return value for gfar_get_cls_all()
  ppp_generic: fix multilink fragment MTU calculation (again)
  GRETH: avoid overwrite IP-stack's IP-frags checksum
  GRETH: RX/TX bytes were never increased
  ipv6: fix a possible double free
  b43: Fix beacon problem in ad-hoc mode
  Bluetooth: add support for 2011 mac mini
  Bluetooth: Add MacBookAir4,1 support
  Bluetooth: Fixed BT ST Channel reg order
  r8169: do not enable the TBI for anything but the original 8169.
  r8169: remove erroneous processing of always set bit.
  r8169: fix WOL setting for 8105 and 8111evl
  r8169: add MODULE_FIRMWARE for the firmware of 8111evl
  r8169: fix the reset setting for 8111evl
  ...

* 'for-linus' of git://git.kernel.dk/linux-block:
  floppy: use del_timer_sync() in init cleanup
  blk-cgroup: be able to remove the record of unplugged device
  block: Don't check QUEUE_FLAG_SAME_COMP in __blk_complete_request
  mm: Add comment explaining task state setting in bdi_forker_thread()
  mm: Cleanup clearing of BDI_pending bit in bdi_forker_thread()
  block: simplify force plug flush code a little bit
  block: change force plug flush call order
  block: Fix queue_flag update when rq_affinity goes from 2 to 1
  block: separate priority boosting from REQ_META
  block: remove READ_META and WRITE_META
  xen-blkback: fixed indentation and comments
  xen-blkback: Don't disconnect backend until state switched to XenbusStateClosed.

When a malformed loglevel value (for example "${abc}") is passed on the
kernel cmdline, the loglevel itself is being set to 0.

That then suppresses all following messages, including all the errors
and crashes caused by other malformed cmdline options.  This could make
debugging process quite tricky.

This patch leaves the previous value of loglevel if the new value is
incorrect and reports an error code in this case.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@sysgo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is modeled after the smaps code.

It detects transparent hugepages and then does a single gather_stats()
for the page as a whole.  This has two benifits:
 1. It is more efficient since it does many pages in a single shot.
 2. It does not have to break down the huge page.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gather_pte_stats() does a number of checks on a target page
to see whether it should even be considered for statistics.
This breaks that code out in to a separate function so that
we can use it in the transparent hugepage case in the next
patch.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Christoph Lameter <cl@gentwo.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We need to teach the numa_maps code about transparent huge pages.  The
first step is to teach gather_stats() that the pte it is dealing with
might represent more than one page.

Note that will we use this in a moment for transparent huge pages since
they have use a single pmd_t which _acts_ as a "surrogate" for a bunch
of smaller pte_t's.

I'm a _bit_ unhappy that this interface counts in hugetlbfs page sizes
for hugetlbfs pages and PAGE_SIZE for normal pages.  That means that to
figure out how many _bytes_ "dirty=1" means, you must first know the
hugetlbfs page size.  That's easier said than done especially if you
don't have visibility in to the mount.

But, that's probably a discussion for another day especially since it
would change behavior to fix it.  But, just in case anyone wonders why
this patch only passes a '1' in the hugetlb case...
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When asyncronous crypto algorithms are used, there might be many
packets that passed the xfrm replay check, but the replay advance
function is not called yet for these packets. So the replay check
function would accept a replay of all of these packets. Also the
system might crash if there are more packets in async processing
than the size of the anti replay window, because the replay advance
function would try to update the replay window beyond the bounds.

This pach adds a second replay check after resuming from the async
processing to fix these issues.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

add new fib rule can cause BUG_ON happen
the reproduce shell is
ip rule add pref 38
ip rule add pref 38
ip rule add to 192.168.3.0/24 goto 38
ip rule del pref 38
ip rule add to 192.168.3.0/24 goto 38
ip rule add pref 38

then the BUG_ON will happen
del BUG_ON and use (ctarget == NULL) identify whether this rule is unresolved
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When no floppy is found the module code can be released while a timer
function is pending or about to be executed.

CPU0                                  CPU1
				      floppy_init()
timer_softirq()
   spin_lock_irq(&base->lock);
   detach_timer();
   spin_unlock_irq(&base->lock);
   -> Interrupt
					del_timer();
				        return -ENODEV;
                                      module_cleanup();
   <- EOI
   call_timer_fn();
   OOPS

Use del_timer_sync() to prevent this.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The bug is we're not able to remove the device from blkio cgroup's
per-device control files if it gets unplugged.

To reproduce the bug:

  # mount -t cgroup -o blkio xxx /cgroup
  # cd /cgroup
  # echo "8:0 1000" > blkio.throttle.read_bps_device
  # unplug the device
  # cat blkio.throttle.read_bps_device
  8:0	1000
  # echo "8:0 0" > blkio.throttle.read_bps_device
  -bash: echo: write error: No such device

After patching, the device removal will succeed.

Thanks for the comments of Paul, Zefan, and Vivek.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <paul@paulmenage.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It seems that at least one PPC machine would occasionally give a (valid) 0 as
the return value from dma_map, this caused the ixgbe code to not work
correctly.  A fix is pending in the PPC tree to not return 0 from dma map, but
we can also fix the driver to make sure we don't mess up in other arches as
well.

This patch is applicable to all current stable kernels.

Ref: https://bugzilla.redhat.com/show_bug.cgi?id=683611Reported-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
CC: stable@kernel.org
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 92cd3a17
    tg3: Simplify tx bd assignments

broke VLAN tagging on outbound packets.
It ifdef'ed BCM_KERNEL_SUPPORTS_8021Q, but this
is not set anywhere. So vlan never gets set, and
all packets are sent with vlan=0.

v2: We can just remove the test. vlan_tx_tag_present
is valid regardless of whether the 802.1q module
is built.

Tested on BCM5721 rev 11.
Signed-off-by: Kasper Pedersen <kernel@kasperkp.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'fixes' of git://git.linaro.org/people/arnd/arm-soc:
  mach-integrator: fix VGA base regression
  arm/dt: Tegra: Update SDHCI nodes to match bindings
  ARM: EXYNOS4: fix incorrect pad configuration for keypad row lines
  ARM: SAMSUNG: fix to prevent declaring duplicated
  ARM: SAMSUNG: fix watchdog reset issue with clk_get()
  ARM: S3C64XX: Remove un-used code backlight code on SMDK6410
  ARM: EXYNOS4: restart clocksource while system resumes
  ARM: EXYNOS4: Fix routing timer interrupt to offline CPU
  ARM: EXYNOS4: Fix return type of local_timer_setup()
  ARM: EXYNOS4: Fix wrong pll type for vpll
  ARM: Dove: fix second SPI initialization call

* 'for-linus' of git://github.com/chrismason/linux:
  Btrfs: reserve sufficient space for ioctl clone

After commit c5f5c4db ("staging: zcache: fix crash on high memory
swap") cleancache crashes on the first successful get.  This was caused
by a remaining virt_to_page() call in zcache_pampd_get_data_and_free()
that only gets run in the cleancache path.

The patch converts the virt_to_page() to struct page casting like was
done for other instances in c5f5c4db.
Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com>
Tested-By: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The changes introduced in commit
cc22b4c1
"ARM: set vga memory base at run-time"

Makes the Integrator/AP freeze completely. I appears that
this is due to the VGA base address being assigned at PCI
init time, while this base is needed earlier than that.
Moving the initialization of the base address to the
.map_io function solves this problem.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The bindings were recently updated to have separate properties for each
type of GPIO. Update the Device Tree source to match that.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Commit a6b7a407 removed
linux/interrupt.h from netdevice.h. This fixes below build failure

drivers/net/pxa168_eth.c: In function 'pxa168_eth_collect_events':
drivers/net/pxa168_eth.c:866: error: 'IRQ_NONE' undeclared (first use in this function)
drivers/net/pxa168_eth.c:866: error: (Each undeclared identifier is reported only once
drivers/net/pxa168_eth.c:866: error: for each function it appears in.)
drivers/net/pxa168_eth.c: At top level:
drivers/net/pxa168_eth.c:913: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'pxa168_eth_int_handler'
drivers/net/pxa168_eth.c: In function 'pxa168_eth_open':
drivers/net/pxa168_eth.c:1133: error: implicit declaration of function 'request_irq'
drivers/net/pxa168_eth.c:1133: error: 'pxa168_eth_int_handler' undeclared (first use in this function)
drivers/net/pxa168_eth.c:1134: error: 'IRQF_DISABLED' undeclared (first use in this function)
drivers/net/pxa168_eth.c:1160: error: implicit declaration of function 'free_irq'
Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>