- 28 Apr, 2020 22 commits
-
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Acked-by:
Eric Anholt <eric@anholt.net> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200415074034.175360-21-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Acked-by:
David Lechner <david@lechnology.com> Acked-by:
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Acked-by:
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Acked-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Acked-by:
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Acked-by:
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Acked-by:
-
Daniel Vetter authored
Already using devm_drm_dev_init, so very simple replacment. Aside: There was an oddity in the old code, we allocated priv but in the error path we've freed priv->dbidev ... Acked-by:
-
Daniel Vetter authored
We're mostly there already, just a handful of places that didn't use the to_udl container_of cast. To make sure no new appear, don't set ->dev_private. Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
-
Daniel Vetter authored
With Thomas' patch to clean up fbdev init this is a rather standard conversion to the new wrapper macro. v2: Rebase on top of Thomas' patches to remove the return value from drm_fbdev_generic_setup() v3: Update commit message to reflect the reality of the rebased patch (Sam) Reviewed-by:
-
Daniel Vetter authored
We already have it in v3d_dev->drm.dev with zero additional pointer chasing. Personally I don't like duplicated pointers like this because: - reviewers need to check whether the pointer is for the same or different objects if there's multiple - compilers have an easier time too To avoid having to pull in some big headers I implemented the casting function as a macro instead of a static inline. Typechecking thanks to container_of still assured. But also a bit a bikeshed, so feel free to ignore. v2: More parens for v3d_to_pdev macro (checkpatch) Acked-by:
-
Daniel Vetter authored
We already have it in v3d_dev->drm.dev with zero additional pointer chasing. Personally I don't like duplicated pointers like this because: - reviewers need to check whether the pointer is for the same or different objects if there's multiple - compilers have an easier time too But also a bit a bikeshed, so feel free to ignore. Acked-by:
-
Daniel Vetter authored
Also allows us to simplify the unroll code since the drm_dev_put disappears. Acked-by:
-
Daniel Vetter authored
And switch the helper over to container_of, which is a bunch faster than chasing a pointer. Plus allows gcc to see through this maze. Acked-by:
-
Daniel Vetter authored
Aside from deleting all the cleanup code we're now also setting a name for the pool Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Daniel Vetter authored
Allows us to drop the cleanup code on the floor. Sam noticed in his review: > With this change we avoid calling pci_disable_device() > twise in case vbox_mm_init() fails. > Once in vbox_hw_fini() and once in the error path. v2: Include Sam's review remarks v3: Fix typo in commit summary (Thomas Zimmermann) Acked-by:
-
Daniel Vetter authored
We use the baseclass pattern here, so lets to the proper (and more typesafe) upcasting. Acked-by:
-
Daniel Vetter authored
Straightforward conversion. Reviewed-by:
-
Daniel Vetter authored
Doesn't apply to upstream kernels since a rather long time. Reviewed-by:
-
Daniel Vetter authored
Add a new macro helper to combine the usual init sequence in drivers, consisting of a kzalloc + devm_drm_dev_init + drmm_add_final_kfree triplet. This allows us to remove the rather unsightly drmm_add_final_kfree from all currently merged drivers. The kerneldoc is only added for this new function. Existing kerneldoc and examples will be udated at the very end, since once all drivers are converted over to devm_drm_dev_alloc we can unexport a lot of interim functions and make the documentation for driver authors a lot cleaner and less confusing. There will be only one true way to initialize a drm_device at the end of this, which is going to be devm_drm_dev_alloc. v2: - Actually explain what this is for in the commit message (Sam) - Fix checkpatch issues (Sam) Acked-by:
-
YueHaibing authored
drivers/gpu/drm/omapdrm/dss/venc.c:211:33: warning: 'venc_config_pal_bdghi' defined but not used [-Wunused-const-variable=] static const struct venc_config venc_config_pal_bdghi = { ^~~~~~~~~~~~~~~~~~~~~ It is never used, remove it. Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200415132105.43636-1-yuehaibing@huawei.com
-
Zheng Bin authored
Fixes coccicheck warning: drivers/gpu/drm/meson/meson_plane.c:226:3-4: Unneeded semicolon Reported-by:
Zheng Bin <zhengbin13@huawei.com> Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
- 27 Apr, 2020 4 commits
-
-
Lyude Paul authored
While we support using both tx slots for sideband transmissions, it appears that DisplayPort devices in the field didn't end up doing a very good job of supporting it. From section 5.2.1 of the DP 2.0 specification: There are MST Sink/Branch devices in the field that do not handle interleaved message transactions. To facilitate message transaction handling by downstream devices, an MST Source device shall generate message transactions in an atomic manner (i.e., the MST Source device shall not concurrently interleave multiple message transactions). Therefore, an MST Source device shall clear the Message_Sequence_No value in the Sideband_MSG_Header to 0. This might come as a bit of a surprise since the vast majority of hubs will support using both tx slots even if they don't support interleaved message transactions, and we've also been using both tx slots since MST was introduced into the kernel. However, there is one device we've had trouble getting working consistently with MST for so long that we actually assumed it was just broken: the infamous Dell P2415Qb. Previously this monitor would appear to work sometimes, but in most situations would end up timing out LINK_ADDRESS messages almost at random until you power cycled the whole display. After reading section 5.2.1 in the DP 2.0 spec, some closer investigation into this infamous display revealed it was only ever timing out on sideband messages in the second TX slot. Sure enough, avoiding the second TX slot has suddenly made this monitor function perfectly for the first time in five years. And since they explicitly mention this in the specification, I doubt this is the only monitor out there with this issue. This might even explain explain the seemingly harmless garbage sideband responses we would occasionally see with MST hubs! So - rewrite our sideband TX handlers to only support one TX slot. In order to simplify our sideband handling now that we don't support transmitting to multiple MSTBs at once, we also move all state tracking for down replies from mstbs to the topology manager. Signed-off-by:
Lyude Paul <lyude@redhat.com> Fixes: ad7f8a1f ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Sean Paul <sean@poorly.run> Cc: "Lin, Wayne" <Wayne.Lin@amd.com> Cc: <stable@vger.kernel.org> # v3.17+ Reviewed-by:
Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200424181308.770749-1-lyude@redhat.com
-
Zheng Bin authored
Fixes coccicheck warning: drivers/gpu/drm/rockchip/cdn-dp-reg.c:604:2-3: Unneeded semicolon drivers/gpu/drm/rockchip/cdn-dp-reg.c:622:2-3: Unneeded semicolon drivers/gpu/drm/rockchip/cdn-dp-reg.c:703:2-3: Unneeded semicolon Reported-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200424074410.1070-1-zhengbin13@huawei.com
-
Enric Balletbo i Serra authored
This fixes the following warning detected when running make with W=1 drivers/gpu/drm/rockchip//cdn-dp-core.c:1112:5: warning: no previous prototype for ‘cdn_dp_suspend’ [-Wmissing-prototypes] drivers/gpu/drm/rockchip//cdn-dp-core.c:1126:5: warning: no previous prototype for ‘cdn_dp_resume’ [-Wmissing-prototypes] Signed-off-by:Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
Yannick Fertre authored
Number of endpoints could exceed the fix value MAX_ENDPOINTS(2). Instead of increase simply this value, the number of endpoint could be read from device tree. Load sequence has been a little rework to take care of several panel or bridge which can be connected/disconnected or enable/disable. Signed-off-by:
Yannick Fertre <yannick.fertre@st.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Link: https://patchwork.freedesktop.org/patch/msgid/1582877258-1112-1-git-send-email-yannick.fertre@st.com
-
- 25 Apr, 2020 14 commits
-
-
Bjorn Andersson authored
The InfoVision Optoelectronics M133NWF4 R0 panel is a 13.3" 1920x1080 eDP panel, add support for it in panel-simple. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Bjorn Andersson authored
Define the vendor prefix for InfoVision Optoelectronics and add their M133NWF4 R0 13.3" FHD (1920x1080) TFT LCD panel to the compatible list of panel-simple. Signed-off-by:
-
Bjorn Andersson authored
The BOE NV133FHM-N61 panel is a 13.3" 1920x1080 eDP panel, add support for it in panel-simple. Signed-off-by:
-
Bjorn Andersson authored
Add the BOE NV133FHM-N61 13.3" FHD (1920x1080) TFT LCD Panel to the compatible list of panel-simple. Signed-off-by:
-
Souptick Joarder authored
These are dead code since 3.15. These can be removed forever if no plan to use it further. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
-
YueHaibing authored
drivers/gpu/drm/panel/panel-truly-nt35597.c:493:31: warning: variable ‘config’ set but not used [-Wunused-but-set-variable] const struct nt35597_config *config; ^~~~~~ Signed-off-by: -
Thierry Reding authored
Add missing compatible strings for the Panasonic and Chunghwa panels found on NVIDIA Dalmore and Cardhu boards. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Enric Balletbo i Serra authored
Since commit 89958b7c ("drm/bridge: panel: Infer connector type from panel by default"), drm_panel_bridge_add() and their variants can return NULL and an error pointer. This is fine but none of the actual users of the API are checking for the NULL value. Instead of change all the users, seems reasonable to return an error pointer instead. So change the returned value for those functions when the connector type is unknown. Suggested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Enric Balletbo i Serra authored
The panel connector type should be set by the panel not the bridge, so remove the connector_type assignment. Signed-off-by:
-
Enric Balletbo i Serra authored
The LP120UP1 is a eDP panel, set the connector type accordingly. Signed-off-by:
-
Zheng Bin authored
Fixes coccicheck warning: drivers/gpu/drm/panel/panel-ilitek-ili9322.c:382:2-3: Unneeded semicolon drivers/gpu/drm/panel/panel-ilitek-ili9322.c:391:2-3: Unneeded semicolon Reported-by:
-
Sebastian Reichel authored
Add timings for the AUO G121EAN01.4 panel. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Sebastian Reichel authored
Add timings for the AUO G156XTN01.0 panel. Signed-off-by:
-
Sebastian Reichel authored
Add timings for the G190EAN01 dual channel LVDS panel. Signed-off-by:
-
