- 30 Mar, 2018 6 commits
-
-
Tal Gilboa authored
When calculating difference between samples, the values are multiplied by 100. Large values may cause int overflow when multiplied (usually on first iteration). Fixed by forcing 100 to be of type unsigned long. Fixes: 4c4dbb4a ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux") Signed-off-by:
Tal Gilboa <talgi@mellanox.com> Reviewed-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Toshiaki Makita says: ==================== Fix vlan tag handling for vlan packets without ethernet headers Eric Dumazet reported syzbot found a new bug which leads to underflow of size argument of memmove(), causing crash[1]. This can be triggered by tun devices. The underflow happened because skb_vlan_untag() did not expect vlan packets without ethernet headers, and tun can produce such packets. I also checked vlan_insert_inner_tag() and found a similar bug. This series fixes these problems. [1] https://marc.info/?l=linux-netdev&m=152221753920510&w=2 ==================== Signed-off-by:
-
Toshiaki Makita authored
In some situation vlan packets do not have ethernet headers. One example is packets from tun devices. Users can specify vlan protocol in tun_pi field instead of IP protocol. When we have a vlan device with reorder_hdr disabled on top of the tun device, such packets from tun devices are untagged in skb_vlan_untag() and vlan headers will be inserted back in vlan_insert_inner_tag(). vlan_insert_inner_tag() however did not expect packets without ethernet headers, so in such a case size argument for memmove() underflowed. We don't need to copy headers for packets which do not have preceding headers of vlan headers, so skip memmove() in that case. Also don't write vlan protocol in skb->data when it does not have enough room for it. Fixes: cbe7128c ("vlan: Fix out of order vlan headers with reorder header off") Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
-
Toshiaki Makita authored
In some situation vlan packets do not have ethernet headers. One example is packets from tun devices. Users can specify vlan protocol in tun_pi field instead of IP protocol, and skb_vlan_untag() attempts to untag such packets. skb_vlan_untag() (more precisely, skb_reorder_vlan_header() called by it) however did not expect packets without ethernet headers, so in such a case size argument for memmove() underflowed and triggered crash. ==== BUG: unable to handle kernel paging request at ffff8801cccb8000 IP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 PGD 9cee067 P4D 9cee067 PUD 1d9401063 PMD 1cccb7063 PTE 2810100028101 Oops: 000b [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17663 Comm: syz-executor2 Not tainted 4.16.0-rc7+ #368 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: 0018:ffff8801cc046e28 EFLAGS: 00010287 RAX: ffff8801ccc244c4 RBX: fffffffffffffffe RCX: fffffffffff6c4c2 RDX: fffffffffffffffe RSI: ffff8801cccb7ffc RDI: ffff8801cccb8000 RBP: ffff8801cc046e48 R08: ffff8801ccc244be R09: ffffed0039984899 R10: 0000000000000001 R11: ffffed0039984898 R12: ffff8801ccc244c4 R13: ffff8801ccc244c0 R14: ffff8801d96b7c06 R15: ffff8801d96b7b40 FS: 00007febd562d700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8801cccb8000 CR3: 00000001ccb2f006 CR4: 00000000001606e0 DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: memmove include/linux/string.h:360 [inline] skb_reorder_vlan_header net/core/skbuff.c:5031 [inline] skb_vlan_untag+0x470/0xc40 net/core/skbuff.c:5061 __netif_receive_skb_core+0x119c/0x3460 net/core/dev.c:4460 __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4627 netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4701 netif_receive_skb+0xae/0x390 net/core/dev.c:4725 tun_rx_batched.isra.50+0x5ee/0x870 drivers/net/tun.c:1555 tun_get_user+0x299e/0x3c20 drivers/net/tun.c:1962 tun_chr_write_iter+0xb9/0x160 drivers/net/tun.c:1990 call_write_iter include/linux/fs.h:1782 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x684/0x970 fs/read_write.c:482 vfs_write+0x189/0x510 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0xef/0x220 fs/read_write.c:581 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x454879 RSP: 002b:00007febd562cc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007febd562d6d4 RCX: 0000000000454879 RDX: 0000000000000157 RSI: 0000000020000180 RDI: 0000000000000014 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000006b0 R14: 00000000006fc120 R15: 0000000000000000 Code: 90 90 90 90 90 90 90 48 89 f8 48 83 fa 20 0f 82 03 01 00 00 48 39 fe 7d 0f 49 89 f0 49 01 d0 49 39 f8 0f 8f 9f 00 00 00 48 89 d1 <f3> a4 c3 48 81 fa a8 02 00 00 72 05 40 38 fe 74 3b 48 83 ea 20 RIP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: ffff8801cc046e28 CR2: ffff8801cccb8000 ==== We don't need to copy headers for packets which do not have preceding headers of vlan headers, so skip memmove() in that case. Fixes: 4bbb3e0e ("net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in message text Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkman says: ==================== pull-request: bpf 2018-03-29 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix nfp to properly check max insn count while emitting instructions in the JIT which was wrongly comparing bytes against number of instructions before, from Jakub. 2) Fix for bpftool to avoid usage of hex numbers in JSON output since JSON doesn't accept hex numbers with 0x prefix, also from Jakub. ==================== Signed-off-by:
-
- 29 Mar, 2018 6 commits
-
-
Jason Wang authored
Vq log_base is the userspace address of bitmap which has nothing to do with IOTLB. So it needs to be validated unconditionally otherwise we may try use 0 as log_base which may lead to pin pages that will lead unexpected result (e.g trigger BUG_ON() in set_bit_to_user()). Fixes: 6b1e6cc7 ("vhost: new device IOTLB API") Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com Signed-off-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Manish Chopra authored
Today, driver drops received packets which are indicated as invalid checksum by the device. Instead of dropping such packets, pass them to the stack with CHECKSUM_NONE indication in skb. Signed-off-by:
Ariel Elior <ariel.elior@cavium.com> Signed-off-by:
Manish Chopra <manish.chopra@cavium.com> Signed-off-by:
-
Stephen Hemminger authored
My recent change to netvsc drive in how receive flags are handled broke multicast. The Hyper-v/Azure virtual interface there is not a multicast filter list, filtering is only all or none. The driver must enable all multicast if any multicast address is present. Fixes: 009f766c ("hv_netvsc: filter multicast/broadcast") Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
David S. Miller authored
We want to use dev_set_mtu() regardless of how we calculate the mtu value. Signed-off-by: -
Raghuram Chary J authored
Description: Crash was reported with syzkaller pointing to lan78xx_write_reg routine. Root-cause: Proper cleanup of workqueues and init/setup routines was not happening in failure conditions. Fix: Handled the error conditions by cleaning up the queues and init/setup routines. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Raghuram Chary J <raghuramchary.jallipalli@microchip.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2018-03-29 1) Fix a rcu_read_lock/rcu_read_unlock imbalance in the error path of xfrm_local_error(). From Taehee Yoo. 2) Some VTI MTU fixes. From Stefano Brivio. 3) Fix a too early overwritten skb control buffer on xfrm transport mode. Please note that this pull request has a merge conflict in net/ipv4/ip_tunnel.c. The conflict is between commit f6cc9c05 ("ip_tunnel: Emit events for post-register MTU changes") from the net tree and commit 24fc7979 ("ip_tunnel: Clamp MTU to bounds on new link") from the ipsec tree. It can be solved as it is currently done in linux-next. ==================== Signed-off-by:
-
- 27 Mar, 2018 14 commits
-
-
Manish Chopra authored
Since commit c5ad119f ("net: sched: pfifo_fast use skb_array") driver is exposed to an issue where it is hitting NULL skbs while handling TX completions. Driver uses mmiowb() to flush the writes to the doorbell bar which is a write-combined bar, however on x86 mmiowb() does not flush the write combined buffer. This patch fixes this problem by replacing mmiowb() with wmb() after the write combined doorbell write so that writes are flushed and synchronized from more than one processor. V1->V2: ------- This patch was marked as "superseded" in patchwork. (Not really sure for what reason).Resending it as v2. Signed-off-by:
-
Jason Wang authored
We tried to remove vq poll from wait queue, but do not check whether or not it was in a list before. This will lead double free. Fixing this by switching to use vhost_poll_stop() which zeros poll->wqh after removing poll from waitqueue to make sure it won't be freed twice. Cc: Darren Kenny <darren.kenny@oracle.com> Reported-by: syzbot+c0272972b01b872e604a@syzkaller.appspotmail.com Fixes: 2b8b328b ("vhost_net: handle polling errors when setting backend") Signed-off-by:
Darren Kenny <darren.kenny@oracle.com> Acked-by:
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4 misc fixes for 4.16 This patchset contains misc bug fixes from the team to the mlx4 Core and Eth drivers. Patch 1 by Eran fixes a control mix of PFC and Global pauses, please queue it to -stable for >= v4.8. Patch 2 by Moshe fixes a resource leak in slave's delete flow, please queue it to -stable for >= v4.5. Series generated against net commit: 3c82b372 net: dsa: mt7530: fix module autoloading for OF platform drivers ==================== Signed-off-by:
-
Moshe Shemesh authored
mlx4_delete_all_resources_for_slave in resource tracker should free all memory allocated for a slave. While releasing memory of fs_rule, it misses releasing memory of fs_rule->mirr_mbox. Fixes: 78efed27 ('net/mlx4_core: Support mirroring VF DMFS rules on both ports') Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
Global pause and PFC configuration should be mutually exclusive (i.e. only one of them at most can be set). However, once PFC was turned off, driver automatically turned Global pause on. This is a bug. Fix the driver behaviour to turn off PFC/Global once the user turned the other on. This also fixed a weird behaviour that at a current time, the profile had both PFC and global pause configuration turned on, which is Hardware-wise impossible and caused returning false positive indication to query tools. In addition, fix error code when setting global pause or PFC to change metadata only upon successful change. Also, removed useless debug print. Fixes: af7d5185 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Fixes: c27a02cd ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC") Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Ursula Braun authored
Not every CLC proposal message needs the maximum buffer length. Due to the MSG_WAITALL flag, it is important to use the peeked real length when receiving the message. Fixes: d63d271c ("smc: switch to sock_recvmsg()") Signed-off-by:
Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by:
-
Cong Wang authored
llc_conn_send_pdu() pushes the skb into write queue and calls llc_conn_send_pdus() to flush them out. However, the status of dev_queue_xmit() is not returned to caller, in this case, llc_conn_state_process(). llc_conn_state_process() needs hold the skb no matter success or failure, because it still uses it after that, therefore we should hold skb before dev_queue_xmit() when that skb is the one being processed by llc_conn_state_process(). For other callers, they can just pass NULL and ignore the return value as they are. Reported-by:
Noam Rathaus <noamr@beyondsecurity.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-03-23 The following series includes fixes for mlx5 netdev and eswitch. v1->v2: - Fixed commit message quotation marks in patch #7 For -stable v4.12 ('net/mlx5e: Avoid using the ipv6 stub in the TC offload neigh update path') ('net/mlx5e: Fix traffic being dropped on VF representor') For -stable v4.13 ('net/mlx5e: Fix memory usage issues in offloading TC flows') ('net/mlx5e: Verify coalescing parameters in range') For -stable v4.14 ('net/mlx5e: Don't override vport admin link state in switchdev mode') For -stable v4.15 ('108b2b6d5c02 net/mlx5e: Sync netdev vxlan ports at open') Please pull and let me know if there's any problem. ==================== Signed-off-by: -
Dave Watson authored
strp_parser_err is called with a negative code everywhere, which then calls abort_parser with a negative code. strp_msg_timeout calls abort_parser directly with a positive code. Negate ETIMEDOUT to match signed-ness of other calls. The default abort_parser callback, strp_abort_strp, sets sk->sk_err to err. Also negate the error here so sk_err always holds a positive value, as the rest of the net code expects. Currently a negative sk_err can result in endless loops, or user code that thinks it actually sent/received err bytes. Found while testing net/tls_sw recv path. Fixes: 43a0c675 ("strparser: Stream parser for messages") Signed-off-by:
Dave Watson <davejwatson@fb.com> Signed-off-by:
-
Craig Dillabaugh authored
Fixes a bug in the tcf_dump_walker function that can cause some actions to not be reported when dumping a large number of actions. This issue became more aggrevated when cookies feature was added. In particular this issue is manifest when large cookie values are assigned to the actions and when enough actions are created that the resulting table must be dumped in multiple batches. The number of actions returned in each batch is limited by the total number of actions and the memory buffer size. With small cookies the numeric limit is reached before the buffer size limit, which avoids the code path triggering this bug. When large cookies are used buffer fills before the numeric limit, and the erroneous code path is hit. For example after creating 32 csum actions with the cookie aaaabbbbccccdddd $ tc actions ls action csum total acts 26 action order 0: csum (tcp) action continue index 1 ref 1 bind 0 cookie aaaabbbbccccdddd ..... action order 25: csum (tcp) action continue index 26 ref 1 bind 0 cookie aaaabbbbccccdddd total acts 6 action order 0: csum (tcp) action continue index 28 ref 1 bind 0 cookie aaaabbbbccccdddd ...... action order 5: csum (tcp) action continue index 32 ref 1 bind 0 cookie aaaabbbbccccdddd Note that the action with index 27 is omitted from the report. Fixes: 4b3550ef ("[NET_SCHED]: Use nla_nest_start/nla_nest_end")" Signed-off-by:Craig Dillabaugh <cdillaba@mojatatu.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Heiner Kallweit authored
pci_set_drvdata() is called only after registering the net_device, therefore we could run into a NPE if one of the functions using driver_data is called before it's set. Fix this by calling pci_set_drvdata() before registering the net_device. This fix is a candidate for stable. As far as I can see the bug has been there in kernel version 3.2 already, therefore I can't provide a reference which commit is fixed by it. The fix may need small adjustments per kernel version because due to other changes the label which is jumped to if register_netdev() fails has changed over time. Reported-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Eric Dumazet authored
skb mac header is not necessarily set at the time skb_network_protocol() is called. Use skb->data instead. BUG: KASAN: slab-out-of-bounds in skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739 Read of size 2 at addr ffff8801b3097a0b by task syz-executor5/14242 CPU: 1 PID: 14242 Comm: syz-executor5 Not tainted 4.16.0-rc6+ #280 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23c/0x360 mm/kasan/report.c:412 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:443 skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739 harmonize_features net/core/dev.c:2924 [inline] netif_skb_features+0x509/0x9b0 net/core/dev.c:3011 validate_xmit_skb+0x81/0xb00 net/core/dev.c:3084 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3142 packet_direct_xmit+0x117/0x790 net/packet/af_packet.c:256 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x3aed/0x60b0 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xca/0x110 net/socket.c:639 ___sys_sendmsg+0x767/0x8b0 net/socket.c:2047 __sys_sendmsg+0xe5/0x210 net/socket.c:2081 Fixes: 19acc327 ("gso: Handle Trans-Ether-Bridging protocol in skb_network_protocol()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Pravin B Shelar <pshelar@ovn.org> Reported-by:
Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Giuseppe Lippolis authored
This modem is embedded on dlink dwr-921 router. The oem configuration states: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=0918 Rev= 2.32 S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by:Giuseppe Lippolis <giu.lippolis@gmail.com> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - fix multicast-via-unicast transmissions for AP isolation and gateway extension, by Linus Luessing (2 patches) ==================== Signed-off-by:
-
- 26 Mar, 2018 14 commits
-
-
Shahar Klein authored
When mlx5_core is loaded it is expected to sync ports with all vxlan devices so it can support vxlan encap/decap. This is done via udp_tunnel_get_rx_info(). Currently this call is set in mlx5e_nic_enable() and if the netdev is not in NETREG_REGISTERED state it will not be called. Normally on load the netdev state is not NETREG_REGISTERED so udp_tunnel_get_rx_info() will not be called. Moving udp_tunnel_get_rx_info() to mlx5e_open() so it will be called on netdev UP event and allow encap/decap. Fixes: 610e89e0 ("net/mlx5e: Don't sync netdev state when not registered") Signed-off-by:
Shahar Klein <shahark@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Or Gerlitz authored
Currently we use the global ipv6_stub var to access the ipv6 global nd table. This practice gets us to troubles when the stub is only partially set e.g when ipv6 is loaded under the disabled policy. In this case, as of commit 343d60aa ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument") the stub is not null, but stub->nd_tbl is and we crash. As we can access the ipv6 nd_tbl directly, the fix is just to avoid the reference through the stub. There is one place in the code where we issue ipv6 route lookup and keep doing it through the stub, but that mentioned commit makes sure we get -EAFNOSUPPORT from the stack. Fixes: 232c0013 ("net/mlx5e: Add support to neighbour update flow") Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
Aviv Heller <avivh@mellanox.com> Signed-off-by:
-
Jianbo Liu authored
For NIC flows, the parsed attributes are not freed when we exit successfully from mlx5e_configure_flower(). There is possible double free for eswitch flows. If error is returned from rhashtable_insert_fast(), the parse attrs will be freed in mlx5e_tc_del_flow(), but they will be freed again before exiting mlx5e_configure_flower(). To fix both issues we do the following: (1) change the condition that determines if to issue the free call to check if this flow is NIC flow, or it does not have encap action. (2) reorder the code such that that the check and free calls are done before we attempt to add into the hash table. Fixes: 232c0013 ('net/mlx5e: Add support to neighbour update flow') Signed-off-by:Jianbo Liu <jianbol@mellanox.com> Reviewed-by:
-
Roi Dayan authored
Increase representor netdev RQ size to avoid dropped packets. The current size (two) is just too small to keep up with conventional slow path traffic patterns. Also match the SQ size to the RQ size. Fixes: cb67b832 ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
-
Moshe Shemesh authored
Add check of coalescing parameters received through ethtool are within range of values supported by the HW. Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the users through ethtool. The ethtool support up to 32 bit value for each. However, mlx5 modify cq limits the coalescing time parameter to 12 bit and coalescing frames parameters to 16 bits. Return out of range error if user tries to set these parameters to higher values. Fixes: f62b8bb8 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by:
-
Or Gerlitz authored
Add dependancy for switchdev to be congfigured as any user-space control plane SW is expected to use the HW switchdev ID to locate the representors related to VFs of a certain PF and apply SW/offloaded switching on them. Fixes: e80541ec ('net/mlx5: Add CONFIG_MLX5_ESWITCH Kconfig') Signed-off-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
SQs are 32 and not 16 bits, hence it's wrong to use only 16 bits to store the sq number for which are going to set steering rule, fix that. Fixes: cb67b832 ('net/mlx5e: Introduce SRIOV VF representors') Signed-off-by:
-
Jianbo Liu authored
The vport admin original link state will be re-applied after returning back to legacy mode, it is not right to change the admin link state value when in switchdev mode. Use direct vport commands to alter logical vport state in netdev representor open/close flows rather than the administrative eswitch API. Fixes: 20a1ea67 ('net/mlx5e: Support VF vport link state control for SRIOV switchdev mode') Signed-off-by:
-
Sean Wang authored
It's required to create a modules.alias via MODULE_DEVICE_TABLE helper for the OF platform driver. Otherwise, module autoloading cannot work. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Sean Wang authored
MODULE_ALIAS exports information to allow the module to be auto-loaded at boot for the drivers registered using legacy platform registration. However, currently the driver is always used by DT-only platform, MODULE_ALIAS is redundant and should be removed properly. Signed-off-by:
-
Jason Wang authored
We try to hold TX virtqueue mutex in vhost_net_rx_peek_head_len() after RX virtqueue mutex is held in handle_rx(). This requires an appropriate lock nesting notation to calm down deadlock detector. Fixes: 03088137 ("vhost_net: basic polling support") Reported-by: syzbot+7f073540b1384a614e09@syzkaller.appspotmail.com Signed-off-by:
-
Torsten Hilbrich authored
This is needed to support the modem found in HP EliteBook 820 G3. Signed-off-by:
Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by:
-
Xin Long authored
The same fix as in 'bonding: move dev_mc_sync after master_upper_dev_link in bond_enslave' is needed for team driver. The panic can be reproduced easily: ip link add team1 type team ip link set team1 up ip link add link team1 vlan1 type vlan id 80 ip link set vlan1 master team1 Fixes: cb41c997 ("team: team should sync the port's uc/mc addrs when add a port") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== bonding: a bunch of fixes for dev hwaddr sync in bond_enslave This patchset is mainly to fix a crash when adding vlan as slave of bond which is also the parent link in patch 2/3, and also fix some err process problems in bond_enslave in patch 1/3 and 3/3. ==================== Signed-off-by:
-
