- 23 Jun, 2005 40 commits
-
-
Christoph Hellwig authored
Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
William Lee Irwin III authored
Kconfig is spitting out massive numbers of errors and so on. This patch switches arch/sparc/Kconfig to use drivers/Kconfig so those stop. Signed-off-by:
William Irwin <wli@holomorphy.com> Signed-off-by:
-
Christoph Lameter authored
The following patch removes the f_error field and all checks of f_error. Trond said: f_error was introduced for NFS, and made sense when we were guaranteed always to have a file pointer around when write errors occurred. Since then, we have (for various reasons) had to introduce the nfs_open_context in order to track the file read/write state, and it made sense to move our f_error tracking there too. Signed-off-by:
Christoph Lameter <christoph@lameter.com> Acked-by:
Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by:
-
Bjorn Helgaas authored
The HCDP specs (i.e., PCDP revision < 3) allow zero as a default value for baud rate and data bits. So if firmware doesn't supply them, let early_serial_console_init() probe for them rather than telling it the baud rate is zero. Also, update the URL for the PCDP spec. Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Arnd Bergmann authored
This patch allows block device drivers to convert their ioctl functions to unlocked_ioctl() like character devices and other subsystems. All functions that were called with the BKL held before are still used that way, but I would not be surprised if it could be removed from the ioctl functions in drivers/block/ioctl.c themselves. As a side note, I found that compat_blkdev_ioctl() acquires the BKL as well, which looks like a bug. I have checked that every user of disk->fops->compat_ioctl() in the current git tree gets the BKL itself, so it could easily be removed from compat_blkdev_ioctl(). Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Stephen Rothwell authored
This patch is based on work by Carlos O'Donell and Matthew Wilcox. It introduces/updates the compat_time_t type and uses it for compat siginfo structures. I have built this on ppc64 and x86_64. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Daniel Ritz authored
- make boot-up card recognition more reliable (ie. redo interrogation always if there is no valid 'card inserted' state) (and yes, i saw it happening on an o2micro controller that both CB_CBARD and CB_16BITCARD bits were set at the same time) - also redo interrogation before probing the ISA interrupts. it's safer to do the probing with the socket in a clean state. - make card insert detect more reliable. yenta_get_status() now returns SS_PENDING as long as the card is not completley inserted and one of the voltage bits is set. also !CB_CBARD doesn't mean CB_16BITCARD. there is CB_NOTACARD as well, so make an explicit check for CB_16BITCARD. - for TI bridges: disable IRQs during power-on. in all-serial and tied interrupt mode the interrupts are always disabled for single-slot controllers. for two-slot contollers the disabling is only done when the other slot is empty. to force disabling there is a new module parameter now: pwr_irqs_off=Y (which is a regression for working setups. that's why it's an option, only use when required) - modparm to disable ISA interrupt probing (isa_probe, defaults to on) - remove unneeded code/cleanups (ie. merge yenta_events() into yenta_interrupts()) Signed-off-by:
Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by:
-
Michal Schmidt authored
include/asm/offset.h is a generated file on x86_64 and mips. Let's add it to Documentation/dontdiff. Signed-off-by:
Michal Schmidt <xschmi00@stud.feec.vutbr.cz> Signed-off-by:
-
TINNES Julien RD-MAPS-ISS authored
A pointer is dereferenced before it is null-checked. Signed-off-by:
-
Thierry Vignaud authored
gconfig: only show scrollbars if needed (which is more user friendly): Signed-off-by:
-
Manfred Spraul authored
Patrick noticed that the initial scan of the semaphore operations logs decrease and increase operations seperately, but then both cases are or'ed together and decrease is never used. The attached patch removes the decrease parameter - it shrinks sys_semtimedop() by 56 bytes. Signed-Of-By:
Manfred Spraul <manfred@colorfullife.com> Signed-off-by:
-
Matthias Urlichs authored
Frame pointers are supposed to enable debuggers to reliably tell where a call comes from. That is defeated by GCC's sibling call optimization (aka tail recursion elimination). This patch turns this optimization off when compiling with frame pointers. Signed-Off-By:
Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by:
-
Christoph Lameter authored
Avoid taking the tasklist_lock in sys_times if the process is single threaded. In a NUMA system taking the tasklist_lock may cause a bouncing cacheline if multiple independent processes continually call sys_times to measure their performance. Signed-off-by:
Shai Fultheim <shai@scalex86.org> Signed-off-by:
-
Pekka Enberg authored
This patch gets rid of some macro obfuscation from fs/eventpoll.c by removing slab allocator wrappers and converting macros to static inline functions. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Acked-by:
Davide Libenzi <davidel@xmailserver.org> Signed-off-by:
-
Peter Osterlund authored
This patch improves write performance for the CD/DVD packet writing driver. The logic for switching between reading and writing has been changed so that streaming writes are no longer interrupted by read requests. Signed-off-by:
Peter Osterlund <petero2@telia.com> Signed-off-by:
-
Oleg Nesterov authored
This patch consolidates sys_fsync and sys_fdatasync. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Benjamin LaHaise authored
Here's a small patch to improve the performance of mempool_alloc by only initializing the wait queue when we're about to wait. Signed-off-by:
Benjamin LaHaise <benjamin.c.lahaise@intel.com> Signed-off-by:
-
Jan Beulich authored
Adding quotation handling to rule_cc_o_c in scripts/Makefile.build as used elsewhere. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Jan Beulich authored
Fix (in the architectures I'm actually building for) the UP definition of per_cpu so that the cpu specified may be any expression, not just an identifier or a suffix expression. Signed-off-by:
-
Jan Beulich authored
Fix a build problem when IDEFLOPPY_DEBUG_BUGS is turned off, and eliminate an access to memory that is no longer allocated (causing systems to fail booting when CONFIG_DEBUG_PAGEALLOC is turned on). Signed-off-by:
-
Yoav Zach authored
In ia64 kernel, the O_LARGEFILE flag is forced when opening a file. This is problematic for execution of 32 bit processes, which are not largefile aware, either by SW emulation or by HW execution. For such processes, the problem is two-fold: 1) When trying to open a file that is larger than 4G the operation should fail, but it's not 2) Writing to offset larger than 4G should fail, but it's not The proposed patch takes advantage of the way 32 bit processes are identified in ia64 systems. Such processes have PER_LINUX32 for their personality. With the patch, the ia64 kernel will not enforce the O_LARGEFILE flag if the current process has PER_LINUX32 set. The behavior for all other architectures remains unchanged. Signed-off-by:
Yoav Zach <yoav.zach@intel.com> Acked-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Martin Schitter authored
kernel 2.6.12-rc2 adopted some code by Bjorn Helgaas supporting NetMos combo controller cards. this implementation doesn't work for nm9855 based cards! there are two reasons: a) the module 'parport_pc' doesn't want to give the resonsibility for the netmos_9855 to 'parport_serial' and can not handle the serial lines -- trivial to fix... http://lists.infradead.org/pipermail/linux-parport/2005-February/000250.html http://lkml.org/lkml/2005/3/24/199 b) the support for the nm9855 in 'parport_serial' still doesn't work because of wrong assumptions about the relevant BARs port address layout for this chip: 0000:00:09.0 Communication controller: NetMos Technology PCI 9855 Multi-I/O Controller (rev 01) (= 9710:9855) Subsystem: LSI Logic / Symbios Logic 1P4S (= 1000:0014) Flags: medium devsel, IRQ 177 I/O ports at a800 [size=8] (= parport) I/O ports at a400 [size=8] I/O ports at a000 [size=8] (= serial) I/O ports at 9800 [size=8] (= serial) I/O ports at 9400 [size=8] (= serial) I/O ports at 9000 [size=16] (= serial) the following patch will fix the problem. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
Pat Gefre authored
Small mod to shut off the xmit interrupt if we have nothing to transmit. Signed-off-by:
Patrick Gefre <pfg@sgi.com> Signed-off-by:
-
Kirill Korotaev authored
This patch removes O(n^2) super block loops in sync_inodes(), sync_filesystems() etc. in favour of using __put_super_and_need_restart() which I introduced earlier. We faced a noticably long freezes on sb syncing when there are thousands of super blocks in the system. Signed-Off-By:
Kirill Korotaev <dev@sw.ru> Signed-off-by:
-
Kirill Korotaev authored
This patch fixes recalc_sigpending() to work correctly with tasks which are being freezed. The problem is that freeze_processes() sets PF_FREEZE and TIF_SIGPENDING flags on tasks, but recalc_sigpending() called from e.g. sys_rt_sigtimedwait or any other kernel place will clear TIF_SIGPENDING due to no pending signals queued and the tasks won't be freezed until it recieves a real signal or freezed_processes() fail due to timeout. Signed-Off-By:
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by:
-
Kirill Korotaev authored
This patch fixes incorrect and bogus kernel messages that file-max limit reached when the allocation fails Signed-Off-By:
Denis Lunev <den@sw.ru> Signed-off-by:
-
Christoph Hellwig authored
In a duplicate of lookup_create in the af_unix code Al commented what's going on nicely, so let's bring that over to lookup_create before the copy is going away (I'll send a patch soon) Signed-off-by:
-
Alexey Dobriyan authored
"Non-members are not allowed to post messages to this list. Blame the original poster for cross-posting to subscriber-only mailing lists. " Signed-off-by:
Alexey Dobriyan <adobriyan@mail.ru> Acked-by:
Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Andreas Dilger authored
Henrik Grubbstrom noted: The 2.6.10 ext3_get_parent attempts to use ext3_find_entry to look up the entry "..", which fails for dx directories since ".." is not present in the directory hash table. The patch below solves this by looking up the dotdot entry in the dx_root block. Typical symptoms of the above bug are intermittent claims by nfsd that files or directories are missing on exported ext3 filesystems. cf https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=3D150759 and https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=3D144556 ext3_get_parent() is IMHO the wrong place to fix this bug as it introduces a lot of internals from htree into that function. Instead, I think this should be fixed in ext3_find_entry() as in the below patch. This has the added advantage that it works for any callers of ext3_find_entry() and not just ext3_lookup_parent(). Signed-off-by:
Andreas Dilger <adilger@clusterfs.com> Signed-off-by:
Henrik Grubbstrom <grubba@grubba.org> Cc: <ext2-devel@lists.sourceforge.net> Signed-off-by:
-
Alan Cox authored
Add a new `suid_dumpable' sysctl: This value can be used to query and set the core dump mode for setuid or otherwise protected/tainted binaries. The modes are 0 - (default) - traditional behaviour. Any process which has changed privilege levels or is execute only will not be dumped 1 - (debug) - all processes dump core when possible. The core dump is owned by the current user and no security is applied. This is intended for system debugging situations only. Ptrace is unchecked. 2 - (suidsafe) - any binary which normally would not be dumped is dumped readable by root only. This allows the end user to remove such a dump but not access it directly. For security reasons core dumps in this mode will not overwrite one another or other files. This mode is appropriate when adminstrators are attempting to debug problems in a normal environment. (akpm: > > +EXPORT_SYMBOL(suid_dumpable); > > EXPORT_SYMBOL_GPL? No problem to me. > > if (current->euid == current->uid && current->egid == current->gid) > > current->mm->dumpable = 1; > > Should this be SUID_DUMP_USER? Actually the feedback I had from last time was that the SUID_ defines should go because its clearer to follow the numbers. They can go everywhere (and there are lots of places where dumpable is tested/used as a bool in untouched code) > Maybe this should be renamed to `dump_policy' or something. Doing that > would help us catch any code which isn't using the #defines, too. Fair comment. The patch was designed to be easy to maintain for Red Hat rather than for merging. Changing that field would create a gigantic diff because it is used all over the place. ) Signed-off-by:Alan Cox <alan@redhat.com> Signed-off-by:
-
Prasanna S Panchamukhi authored
Presently either multiple kprobes or only one jprobe could be inserted. This patch removes the above limitation and allows one jprobe and multiple kprobes to coexist at the same address. However multiple jprobes cannot coexist with multiple kprobes. Currently I am working on the prototype to allow multiple jprobes coexist with multiple kprobes. Signed-off-by:
Ananth N Mavinakayanhalli <amavin@redhat.com> Signed-off-by:
Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by:
-
Anil S Keshavamurthy authored
This patch includes IA64 architecture specific changes(ported form i386) to support temporary disarming on reentrancy of probes. In case of reentrancy we single step without calling user handler. Signed-of-by:
Anil S Keshavamurth <anil.s.keshavamurthy@intel.com> Signed-off-by:
-
Prasanna S Panchamukhi authored
This patch includes sparc64 architecture specific changes to support temporary disarming on reentrancy of probes. Signed-of-by:
-
Prasanna S Panchamukhi authored
This patch includes ppc64 architecture specific changes to support temporary disarming on reentrancy of probes. Signed-of-by:
-
Prasanna S Panchamukhi authored
This patch includes x86_64 architecture specific changes to support temporary disarming on reentrancy of probes. Signed-of-by:
-
Prasanna S Panchamukhi authored
This patch includes i386 architecture specific changes to support temporary disarming on reentrancy of probes. Signed-of-by:
-
Prasanna S Panchamukhi authored
In situations where a kprobes handler calls a routine which has a probe on it, then kprobes_handler() disarms the new probe forever. This patch removes the above limitation by temporarily disarming the new probe. When the another probe hits while handling the old probe, the kprobes_handler() saves previous kprobes state and handles the new probe without calling the new kprobes registered handlers. kprobe_post_handler() restores back the previous kprobes state and the normal execution continues. However on x86_64 architecture, re-rentrancy is provided only through pre_handler(). If a routine having probe is referenced through post_handler(), then the probes on that routine are disarmed forever, since the exception stack is gets changed after the processor single steps the instruction of the new probe. This patch includes generic changes to support temporary disarming on reentrancy of probes. Signed-of-by:
-
Keshavamurthy Anil S authored
Once the jprobe instrumented function returns, it executes a jprobe_break which is a break instruction with __IA64_JPROBE_BREAK value. The current patch checks for this break value, before assuming that jprobe instrumented function just completed. The previous code was not checking for this value and that was a bug. Signed-off-by:
-
Anil S Keshavamurthy authored
The current kprobes does not yet handle register kprobes on some of the following kind of instruction which needs to be emulated in a special way. 1) mov r1=ip 2) chk -- Speculation check instruction This patch attempts to fail register_kprobes() when user tries to insert kprobes on the above kind of instruction. Signed-off-by:
-
Anil S Keshavamurthy authored
The current Kprobes when patching the original instruction with the break instruction tries to retain the original qualifying predicate(qp), however for cmp.crel.ctype where ctype == unc, which is a special instruction always needs to be executed irrespective of qp. Hence, if the instruction we are patching is of this type, then we should not copy the original qp to the break instruction, this is because we always want the break fault to happen so that we can emulate the instruction. This patch is based on the feedback given by David Mosberger Signed-off-by:
-
