MRI scripts cannot handle + in paths, and ubuntu CI makes use of
these.

So we remove the top level build dir from the script and
transform it into a relative path script.

Because of common dependencies between the
static libraries list can contain duplicates.

We reduce these down to the single last one in
the list.

This reduces the relative time of a rebuild from:

$ (cd builddir/; time make -j)
...
real	0m30.789s
user	1m33.477s
sys	0m19.678s

and the LIB entries
$ grep ADDLIB builddir/libmysqld/mysqlserver-\$\<CONFIG\>.mri.tpl  | wc -l
179

$ du -h builddir/libmysqld/libmariadbd.a
4.1G	builddir/libmysqld/libmariadbd.a

To:

$ (cd builddir/; time make -j)
...
real	0m20.139s
user	1m32.423s
sys	0m12.208s

$ grep ADDLIB builddir/libmysqld/mysqlserver-\$\<CONFIG\>.mri.tpl  | wc -l
25

$ du -h builddir/libmysqld/libmariadbd.a
688M	builddir/libmysqld/libmariadbd.a

from configuration files

Post-push fix: add mysqd options in backup string in mariabackup sst
script for the case of logging not in syslog.

The test mariabackup.mdev-14447 started failing due to the option
--apply-log-only that became invalid since
commit 9bdf35e9
and had been removed in
commit 8c71c6aa.

and put them all together in mysqld.cc

(if this option is present). perf, and other tools that do stack walking
works much better with it.

- There is a possiblity that metadata record is the only record in
the leftmost leaf page. So change the assertion to check only
previous page.

- This is a regression of MDEV-21174(56f6dab1).
InnoDB resets the BTR_EXTERN_LEN value at wrong offset.

galera_ipv6_mariabackup MTR tests

The galera.galera_parallel_autoinc_manytrx mtr test opens and runs test
scenario through 3 connections to node 1 and one connection to node 2.
In the test initialization phase, the test creates two tables 't1' and 'ten'
and then creates a stored procedure 'p1' to operate on these tables.
These 3 create DDL statements are issued through same connection to node 1.

In the next test phase, the mtr script uses send command to launch the call
for the p1 stored procedure through all 3 connections to node 1 and through
one connection to node 2. As the mtr send command is asynchronous,
this test phase is non blocking and fast operation.
Now, if the replication between nodes is slow, it may happen that the
initialization phase DDL statements have not been received or have not been
fully applied in node 2. Therefore there is no guarantee that the test tables
and the stored procedure have been created in node 2. Yet, the test is trying
to call p1 in node 2.

In the failure case error logs, there is error message
"MTR failed: query 'reap' failed: 1305: PROCEDURE test.p1 does not exist"

The reap command through connection to node 2, is the first place where test
execution may observe that test tables and/or stored procedure are not yet
created in node 2.

The fix in this commit adds a wait condition in connection to node 2, to wait
until the stored procedure is created before calling the stored procedure.
The wait is implemented by looking in information_schema.routines for the p1
stored procedure.

MDEV-22125 : galera.galera_drop_multi MTR failed: InnoDB: MySQL is trying to drop database `fts`.`` though there are still open handles

MDEV-22140 galera.galera_drop_database MTR failed: InnoDB: MySQL is trying to drop database `fts`.`` though there are still open handles

Add wait conditions to wait that all operations are done in both
nodes.

Make sure to initialize SSL early enough, when encryption plugins is loaded

            increased scalability through even distribution

Rollback segments are allocated to transactions in round-robin fashion.
This is controlled by incrementing a static-scope counter named rseg_slot.

Said logic is not protected by any mutex or use of atomic for the counter.
This potentially can cause the same rollback segment to get allocated to
N different transactions (requesting allocation at the same time).
While this is not an issue as a rollback segment can host multiple
transactions from contention (performance) perspective it is better to
allocate these rollback segments in round-robin fashion.

Fix for the said issue ports use of atomic for the said counter that would
ensure the original design semantic (even distribution through round-robin)
is retained.

MDEV-22370 safe_mutex: Trying to lock uninitialized mutex at /data/src/10.4-bug/sql/rpl_parallel.cc, line 470 upon shutdown during FTWRL

Problem:- When we issue FTWRL with shutdown in parallel, there is race between
FTWRL and shutdown. Shutdown might destroy the mutex (pool->LOCK_rpl_thread_pool)
before FTWRL can lock it. So we can get crash on FTWRL thread

Solution:- mysql_mutex_destroy(pool->LOCK_rpl_thread_pool) should wait for
FTWRL thread to complete its work , and then destroy.
So slave_prepare_for_shutdown will just deactivate the pool, and mutex is destroyed
later in end_slave()

The galera.galera_parallel_autoinc_manytrx mtr test opens and runs test
scenario through 3 connections to node 1 and one connection to node 2.
In the test initialization phase, the test creates two tables 't1' and 'ten'
and then creates a stored procedure 'p1' to operate on these tables.
These 3 create DDL statements are issued through same connection to node 1.

In the next test phase, the mtr script uses send command to launch the call
for the p1 stored procedure through all 3 connections to node 1 and through
one connection to node 2. As the mtr send command is asynchronous,
this test phase is non blocking and fast operation.
Now, if the replication between nodes is slow, it may happen that the
initialization phase DDL statements have not been received or have not been
fully applied in node 2. Therefore there is no guarantee that the test tables
and the stored procedure have been created in node 2. Yet, the test is trying
to call p1 in node 2.

In the failure case error logs, there is error message
"MTR failed: query 'reap' failed: 1305: PROCEDURE test.p1 does not exist"

The reap command through connection to node 2, is the first place where test
execution may observe that test tables and/or stored procedure are not yet
created in node 2.

The fix in this commit adds a wait condition in connection to node 2, to wait
until the stored procedure is created before calling the stored procedure.
The wait is implemented by looking in information_schema.routines for the p1
stored procedure.

galera_ipv6_mariabackup MTR tests

MDEV-21298: mariabackup doesn't read from the [mariadbd] and [mariadbd-X.Y]
server option groups from configuration files
MDEV-21301: mariabackup doesn't read [mariadb-backup] option group in
configuration file

All three issues require to change the same code, that is why their
fixes are joined in one commit.

The fix is in invoking load_defaults_or_exit() and handle_options() for
backup-specific groups separately from client-server groups to let the last
handle_options() call fail on unknown backup-specific options.

The order of options procesing is the following:
1) Load server groups and process server options, ignore unknown
options
2) Load client groups and process client options, ignore unknown
options
3) Load backup groups and process client-server options, exit on
unknown option
4) Process --mysqld-args command line options, ignore unknown options

New global flag my_handle_options_init_variables was added to have
ability to invoke handle_options() for the same allowed options set
several times without re-initialising previously set option values.

--password value destroying is moved from option processing callback to
mariabackup's handle_options() function to have ability to invoke server's
handle_options() several times for the same possible allowed options
set.

Galera invokes wsrep_sst_mariabackup.sh with mysqld command line
options to configure mariabackup as close to the server as possible.
It is not known what server options are supported by mariabackup when the
script is invoked. That is why new mariabackup option "--mysqld-args" is added,
all unknown options that follow this option will be silently ignored.

wsrep_sst_mariabackup.sh was also changed to:
- use "--mysqld-args" mariabackup option to pass mysqld options,
- remove deprecated innobackupex mode,
- remove unsupported mariabackup options:
    --encrypt
    --encrypt-key
    --rebuild-indexes
    --rebuild-threads

MEM_GET_VBITS(): Save information about uninitialized data.

MEM_SET_VBITS(): Restore information about uninitialized data.

Make ut_new_get_key_by_file event less expensive
remove binary search, compute auto_event_keys offset at compile time.

Replace all references to /usr/sbin/mysqld (and bin and libexec) with
mariadbd, so that the binary server will always be 'mariadbd'.

Also update all places that reference the server binary in other ways,
such as AppArmor profiles and scripts that previously expected to find
a 'mysqld' in process lists.

Item_field::is_json_value() implemented.

Warning message and function result fixed

MDEV-22881 Unexpected errors, corrupt output, Valgrind / ASAN errors in Item_ident::print or append_identifier

After this code

end_inplace:

  if (thd->locked_tables_list.reopen_tables(thd, false))
    goto err_with_mdl_after_alter;

table is not reopened (need_reopen is false) but
some_table_marked_for_reopen is reset to false.

Item_field is allocated on table lock and assigned new name on first
ALTER which is then freed at the end of the command. Second ALTER
accessess this Item_field and gets garbage value.

Make sure to replace the datadir absolute path.

This is one more follow-up fix to MDEV-22641.

Explicitly specify the dependency of the innobase library on mysys.

Also, remove stale references to CRC32_LIBRARY, which should have
been removed in commit dec3f8ca.

Make mark_join_nest_as_const() print its action into the trace.

This was done to be able to track some cases of unallocated memory
in replication tests reported by MSAN.

MDEV-22691 MSAN use-of-uninitialized-value in test maria.maria-recovery2

This caused all my_vsnprintf() using doubles to fail.
Thanks to the workaround, I was able to remove the disabling of
MSAN in dtoa().

MDEV-20302 Server hangs upon concurrent SELECT from partitioned S3