r8a7794-silk.dts

// SPDX-License-Identifier: GPL-2.0
/*
 * Device Tree Source for the SILK board
 *
 * Copyright (C) 2014 Renesas Electronics Corporation
 * Copyright (C) 2014-2015 Renesas Solutions Corp.
 * Copyright (C) 2014-2015 Cogent Embedded, Inc.
 */

/*
 * SSI-AK4643
 *
 * SW1: 2-1: AK4643
 *      2-3: ADV7511
 *
 * This command is required before playback/capture:
 *
 *	amixer set "LINEOUT Mixer DACL" on
 */

/dts-v1/;
#include "r8a7794.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	model = "SILK";
	compatible = "renesas,silk", "renesas,r8a7794";

	aliases {
		serial0 = &scif2;
		i2c9 = &gpioi2c1;
		i2c10 = &i2chdmi;
		mmc0 = &mmcif0;
		mmc1 = &sdhi1;
	};

	chosen {
		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
		stdout-path = "serial0:115200n8";
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0 0x40000000 0 0x40000000>;
	};

	keyboard {
		compatible = "gpio-keys";

		pinctrl-0 = <&keyboard_pins>;
		pinctrl-names = "default";

		key-3 {
			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_3>;
			label = "SW3";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-4 {
			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_4>;
			label = "SW4";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-6 {
			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_6>;
			label = "SW6";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-a {
			gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_A>;
			label = "SW12-1";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-b {
			gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_B>;
			label = "SW12-2";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-c {
			gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_C>;
			label = "SW12-3";
			wakeup-source;
			debounce-interval = <20>;
		};
		key-d {
			gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_D>;
			label = "SW12-4";
			wakeup-source;
			debounce-interval = <20>;
		};
	};

	d1_8v: regulator-d1-8v {
		compatible = "regulator-fixed";
		regulator-name = "D1.8V";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-boot-on;
		regulator-always-on;
	};

	d3_3v: regulator-d3-3v {
		compatible = "regulator-fixed";
		regulator-name = "D3.3V";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		regulator-always-on;
	};

	vcc_sdhi1: regulator-vcc-sdhi1 {
		compatible = "regulator-fixed";

		regulator-name = "SDHI1 Vcc";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;

		gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	vccq_sdhi1: regulator-vccq-sdhi1 {
		compatible = "regulator-gpio";

		regulator-name = "SDHI1 VccQ";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <3300000>;

		gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
		gpios-states = <1>;
		states = <3300000 1>, <1800000 0>;
	};

	vga-encoder {
		compatible = "adi,adv7123";

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;
				adv7123_in: endpoint {
					remote-endpoint = <&du_out_rgb1>;
				};
			};
			port@1 {
				reg = <1>;
				adv7123_out: endpoint {
					remote-endpoint = <&vga_in>;
				};
			};
		};
	};

	hdmi-out {
		compatible = "hdmi-connector";
		type = "a";

		port {
			hdmi_con: endpoint {
				remote-endpoint = <&adv7511_out>;
			};
		};
	};

	vga {
		compatible = "vga-connector";

		port {
			vga_in: endpoint {
				remote-endpoint = <&adv7123_out>;
			};
		};
	};

	x2_clk: x2-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <148500000>;
	};

	x3_clk: x3-clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <74250000>;
	};

	x9_clk: audio_clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <12288000>;
	};

	sound {
		compatible = "simple-audio-card";

		simple-audio-card,format = "left_j";
		simple-audio-card,bitclock-master = <&soundcodec>;
		simple-audio-card,frame-master = <&soundcodec>;

		simple-audio-card,cpu {
			sound-dai = <&rcar_sound>;
		};

		soundcodec: simple-audio-card,codec {
			sound-dai = <&ak4643>;
			clocks = <&x9_clk>;
		};
	};

	gpioi2c1: i2c-9 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "i2c-gpio";
		status = "disabled";
		scl-gpios = <&gpio4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		sda-gpios = <&gpio4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		i2c-gpio,delay-us = <5>;
	};

	/*
	 * A fallback to GPIO is provided for I2C1.
	 */
	i2chdmi: i2c-mux1 {
		compatible = "i2c-demux-pinctrl";
		i2c-parent = <&i2c1>, <&gpioi2c1>;
		i2c-bus-name = "i2c-hdmi";
		#address-cells = <1>;
		#size-cells = <0>;

		ak4643: codec@12 {
			compatible = "asahi-kasei,ak4643";
			#sound-dai-cells = <0>;
			reg = <0x12>;
		};

		composite-in@20 {
			compatible = "adi,adv7180";
			reg = <0x20>;

			port {
				adv7180: endpoint {
					bus-width = <8>;
					remote-endpoint = <&vin0ep>;
				};
			};
		};

		hdmi@39 {
			compatible = "adi,adv7511w";
			reg = <0x39>;
			interrupt-parent = <&gpio5>;
			interrupts = <23 IRQ_TYPE_LEVEL_LOW>;

			avdd-supply = <&d1_8v>;
			dvdd-supply = <&d1_8v>;
			pvdd-supply = <&d1_8v>;
			dvdd-3v-supply = <&d3_3v>;
			bgvdd-supply = <&d1_8v>;

			adi,input-depth = <8>;
			adi,input-colorspace = "rgb";
			adi,input-clock = "1x";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;
					adv7511_in: endpoint {
						remote-endpoint = <&du_out_rgb0>;
					};
				};

				port@1 {
					reg = <1>;
					adv7511_out: endpoint {
						remote-endpoint = <&hdmi_con>;
					};
				};
			};
		};

		eeprom@50 {
			compatible = "renesas,r1ex24002", "atmel,24c02";
			reg = <0x50>;
			pagesize = <16>;
		};
	};
};

&extal_clk {
	clock-frequency = <20000000>;
};

&pfc {
	pinctrl-0 = <&scif_clk_pins>;
	pinctrl-names = "default";

	scif2_pins: scif2 {
		groups = "scif2_data";
		function = "scif2";
	};

	scif_clk_pins: scif_clk {
		groups = "scif_clk";
		function = "scif_clk";
	};

	ether_pins: ether {
		groups = "eth_link", "eth_mdio", "eth_rmii";
		function = "eth";
	};

	phy1_pins: phy1 {
		groups = "intc_irq8";
		function = "intc";
	};

	i2c1_pins: i2c1 {
		groups = "i2c1";
		function = "i2c1";
	};

	mmcif0_pins: mmcif0 {
		groups = "mmc_data8", "mmc_ctrl";
		function = "mmc";
	};

	sdhi1_pins: sd1 {
		groups = "sdhi1_data4", "sdhi1_ctrl";
		function = "sdhi1";
	};

	qspi_pins: qspi {
		groups = "qspi_ctrl", "qspi_data4";
		function = "qspi";
	};

	vin0_pins: vin0 {
		groups = "vin0_data8", "vin0_clk";
		function = "vin0";
	};

	usb0_pins: usb0 {
		groups = "usb0";
		function = "usb0";
	};

	usb1_pins: usb1 {
		groups = "usb1";
		function = "usb1";
	};

	du0_pins: du0 {
		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
		function = "du0";
	};

	du1_pins: du1 {
		groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
		function = "du1";
	};

	keyboard_pins: keyboard {
		pins = "GP_3_9", "GP_3_10", "GP_3_11", "GP_3_12";
		bias-pull-up;
	};

	ssi_pins: sound {
		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
		function = "ssi";
	};

	audio_clk_pins: audio_clk {
		groups = "audio_clkc";
		function = "audio_clk";
	};
};

&scif2 {
	pinctrl-0 = <&scif2_pins>;
	pinctrl-names = "default";

	status = "okay";
};

&scif_clk {
	clock-frequency = <14745600>;
};

&ether {
	pinctrl-0 = <&ether_pins>, <&phy1_pins>;
	pinctrl-names = "default";

	phy-handle = <&phy1>;
	renesas,ether-link-active-low;
	status = "okay";

	phy1: ethernet-phy@1 {
		compatible = "ethernet-phy-id0022.1537",
			     "ethernet-phy-ieee802.3-c22";
		reg = <1>;
		interrupt-parent = <&irqc0>;
		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
		micrel,led-mode = <1>;
		reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
	};
};

&i2c1 {
	pinctrl-0 = <&i2c1_pins>;
	pinctrl-names = "i2c-hdmi";

	clock-frequency = <400000>;
};

&i2c7 {
	status = "okay";
	clock-frequency = <100000>;

	pmic@58 {
		compatible = "dlg,da9063";
		reg = <0x58>;
		interrupt-parent = <&gpio3>;
		interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
		interrupt-controller;
		#interrupt-cells = <2>;

		onkey {
			compatible = "dlg,da9063-onkey";
		};

		rtc {
			compatible = "dlg,da9063-rtc";
		};

		watchdog {
			compatible = "dlg,da9063-watchdog";
		};
	};
};

&mmcif0 {
	pinctrl-0 = <&mmcif0_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&d3_3v>;
	vqmmc-supply = <&d3_3v>;
	bus-width = <8>;
	non-removable;
	status = "okay";
};

&sdhi1 {
	pinctrl-0 = <&sdhi1_pins>;
	pinctrl-names = "default";

	vmmc-supply = <&vcc_sdhi1>;
	vqmmc-supply = <&vccq_sdhi1>;
	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&qspi {
	pinctrl-0 = <&qspi_pins>;
	pinctrl-names = "default";

	status = "okay";

	flash@0 {
		compatible = "spansion,s25fl512s", "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <30000000>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;
		spi-cpol;
		spi-cpha;
		m25p,fast-read;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "loader";
				reg = <0x00000000 0x00040000>;
				read-only;
			};
			partition@40000 {
				label = "user";
				reg = <0x00040000 0x00400000>;
				read-only;
			};
			partition@440000 {
				label = "flash";
				reg = <0x00440000 0x03bc0000>;
			};
		};
	};
};

/* composite video input */
&vin0 {
	status = "okay";
	pinctrl-0 = <&vin0_pins>;
	pinctrl-names = "default";

	port {
		vin0ep: endpoint {
			remote-endpoint = <&adv7180>;
			bus-width = <8>;
		};
	};
};

&pci0 {
	status = "okay";
	pinctrl-0 = <&usb0_pins>;
	pinctrl-names = "default";
};

&pci1 {
	status = "okay";
	pinctrl-0 = <&usb1_pins>;
	pinctrl-names = "default";
};

&usbphy {
	status = "okay";
};

&du {
	pinctrl-0 = <&du0_pins>, <&du1_pins>;
	pinctrl-names = "default";
	status = "okay";

	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
		 <&x2_clk>, <&x3_clk>;
	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";

	ports {
		port@0 {
			endpoint {
				remote-endpoint = <&adv7511_in>;
			};
		};
		port@1 {
			endpoint {
				remote-endpoint = <&adv7123_in>;
			};
		};
	};
};

&rcar_sound {
	pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>;
	pinctrl-names = "default";
	status = "okay";

	/* Single DAI */
	#sound-dai-cells = <0>;

	rcar_sound,dai {
		dai0 {
			playback = <&ssi0>;
			capture  = <&ssi1>;
		};
	};
};

&rwdt {
	timeout-sec = <60>;
	status = "okay";
};

&ssi1 {
	shared-pin;
};