Since gen6 we use FPGA_DBG register to detect unclaimed MMIO registers.
This register is in the display engine IP and can only ever detect
unclaimed accesses to registers in this area. However sometimes there
are reports of this triggering for registers in other areas, which
should not be possible.

Right now we always warn after the read/write of registers going through
unclaimed_reg_debug(). However places using __raw_uncore_* may be
triggering the unclaimed access and those being later accounted to a
different register. Let's warn both before and after the read/write
with a slightly different message, so it's clear if the register
reported in the warning is actually the culprit.

Commit dda96033 ("drm/i915: Just clear the mmiodebug before a
register access") attempted to solve the same issue by removing the
warning when if FPGA_DBG flags before the mmio read/write. However, it
doesn't solve it completely as FPGA_DBG may remain set when reading
registers outside display. So in the end the check after the mmio
read/write triggers the warning pointing to the wrong register.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405001149.2675226-1-lucas.demarchi@intel.com