• Robert Marko's avatar
    arm64: dts: marvell: add Globalscale MOCHAbin · 73792919
    Robert Marko authored
    Globalscale MOCHAbin is a Armada 7040 based development board.
    
    Specifications:
    * Armada 7040 Quad core ARMv8 Cortex A-72 @ 1.4GHz
    * 2 / 4 / 8 GB of DDR4 DRAM
    * 16 GB eMMC
    * 4MB SPI-NOR (Bootloader)
    * 1x M.2-2280 B-key socket (for SSD expansion, SATA3 only)
    * 1x M.2-2250 B-key socket (for modems, USB2.0 and I2C only)
    * 1x Mini-PCIe 3.0 (x1, USB2.0 and I2C)
    * 1x SATA 7+15 socket (SATA3)
    * 1x 16-pin (2×8) MikroBus Connector
    * 1x SIM card slot (Connected to the mini-PCIe and both M.2 slots)
    * 2x USB3.0 Type-A ports via SMSC USB5434B hub
    * Cortex 2x5 JTAG
    * microUSB port for UART (PL2303GL/PL2303SA onboard)
    * 1x 10G SFP+
    * 1x 1G SFP (Connected to 88E1512 PHY)
    * 1x 1G RJ45 with PoE PD (Connected to 88E1512 PHY)
    * 4x 1G RJ45 ports via Topaz 88E6141 switch
    * RTC with battery holder (SoC provided, requires CR2032 battery)
    * 1x 12V DC IN
    * 1x Power switch
    * 1x 12V fan header (3-pin, power only)
    * 1x mini-PCIe LED header (2x0.1" pins)
    * 1x M.2-2280 LED header (2x0.1" pins)
    * 6x Bootstrap jumpers
    * 1x Power LED (Green)
    * 3x Tri-color RGB LEDs (Controllable)
    * 1x Microchip ATECC608B secure element
    
    Note that 1G SFP and 1G WAN cannot be used at the same time as they are in
    parallel connected to the same PHY.
    Signed-off-by: default avatarRobert Marko <robert.marko@sartura.hr>
    Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
    Signed-off-by: default avatarGregory CLEMENT <gregory.clement@bootlin.com>
    73792919
Makefile 1.25 KB