Commit 0378bb96 authored by Kuninori Morimoto's avatar Kuninori Morimoto Committed by Mark Brown

ASoC: rsnd: move "renesas,rsrc-card" to "simple-scu-audio-card" on Document

"renesas,rsrc-card" is exchanged to "simple-scu-card".
Let's update Document
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 2ea659a9
......@@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
** Asynchronous mode
------------------
You need to use "renesas,rsrc-card" sound card for it.
You need to use "simple-scu-audio-card" sound card for it.
example)
sound {
compatible = "renesas,rsrc-card";
compatible = "simple-scu-audio-card";
...
/*
* SRC Asynchronous mode setting
......@@ -97,12 +97,12 @@ example)
* Inputed 48kHz data will be converted to
* system specified Hz
*/
convert-rate = <48000>;
simple-audio-card,convert-rate = <48000>;
...
cpu {
simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
codec {
simple-audio-card,codec {
...
};
};
......@@ -141,23 +141,23 @@ For more detail information, see below
${LINUX}/sound/soc/sh/rcar/ctu.c
- comment of header
You need to use "renesas,rsrc-card" sound card for it.
You need to use "simple-scu-audio-card" sound card for it.
example)
sound {
compatible = "renesas,rsrc-card";
compatible = "simple-scu-audio-card";
...
/*
* CTU setting
* All input data will be converted to 2ch
* as output data
*/
convert-channels = <2>;
simple-audio-card,convert-channels = <2>;
...
cpu {
simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
codec {
simple-audio-card,codec {
...
};
};
......@@ -190,22 +190,22 @@ and these sounds will be merged by MIX.
aplay -D plughw:0,0 xxxx.wav &
aplay -D plughw:0,1 yyyy.wav
You need to use "renesas,rsrc-card" sound card for it.
You need to use "simple-scu-audio-card" sound card for it.
Ex)
[MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
|
[MEM] -> [SRC2] -> [CTU03] -+
sound {
compatible = "renesas,rsrc-card";
compatible = "simple-scu-audio-card";
...
cpu@0 {
simple-audio-card,cpu@0 {
sound-dai = <&rcar_sound 0>;
};
cpu@1 {
simple-audio-card,cpu@1 {
sound-dai = <&rcar_sound 1>;
};
codec {
simple-audio-card,codec {
...
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment