Commit 0378bb96 authored by Kuninori Morimoto's avatar Kuninori Morimoto Committed by Mark Brown

ASoC: rsnd: move "renesas,rsrc-card" to "simple-scu-audio-card" on Document

"renesas,rsrc-card" is exchanged to "simple-scu-card".
Let's update Document
Signed-off-by: default avatarKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 2ea659a9
...@@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes ...@@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
** Asynchronous mode ** Asynchronous mode
------------------ ------------------
You need to use "renesas,rsrc-card" sound card for it. You need to use "simple-scu-audio-card" sound card for it.
example) example)
sound { sound {
compatible = "renesas,rsrc-card"; compatible = "simple-scu-audio-card";
... ...
/* /*
* SRC Asynchronous mode setting * SRC Asynchronous mode setting
...@@ -97,12 +97,12 @@ example) ...@@ -97,12 +97,12 @@ example)
* Inputed 48kHz data will be converted to * Inputed 48kHz data will be converted to
* system specified Hz * system specified Hz
*/ */
convert-rate = <48000>; simple-audio-card,convert-rate = <48000>;
... ...
cpu { simple-audio-card,cpu {
sound-dai = <&rcar_sound>; sound-dai = <&rcar_sound>;
}; };
codec { simple-audio-card,codec {
... ...
}; };
}; };
...@@ -141,23 +141,23 @@ For more detail information, see below ...@@ -141,23 +141,23 @@ For more detail information, see below
${LINUX}/sound/soc/sh/rcar/ctu.c ${LINUX}/sound/soc/sh/rcar/ctu.c
- comment of header - comment of header
You need to use "renesas,rsrc-card" sound card for it. You need to use "simple-scu-audio-card" sound card for it.
example) example)
sound { sound {
compatible = "renesas,rsrc-card"; compatible = "simple-scu-audio-card";
... ...
/* /*
* CTU setting * CTU setting
* All input data will be converted to 2ch * All input data will be converted to 2ch
* as output data * as output data
*/ */
convert-channels = <2>; simple-audio-card,convert-channels = <2>;
... ...
cpu { simple-audio-card,cpu {
sound-dai = <&rcar_sound>; sound-dai = <&rcar_sound>;
}; };
codec { simple-audio-card,codec {
... ...
}; };
}; };
...@@ -190,22 +190,22 @@ and these sounds will be merged by MIX. ...@@ -190,22 +190,22 @@ and these sounds will be merged by MIX.
aplay -D plughw:0,0 xxxx.wav & aplay -D plughw:0,0 xxxx.wav &
aplay -D plughw:0,1 yyyy.wav aplay -D plughw:0,1 yyyy.wav
You need to use "renesas,rsrc-card" sound card for it. You need to use "simple-scu-audio-card" sound card for it.
Ex) Ex)
[MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0] [MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
| |
[MEM] -> [SRC2] -> [CTU03] -+ [MEM] -> [SRC2] -> [CTU03] -+
sound { sound {
compatible = "renesas,rsrc-card"; compatible = "simple-scu-audio-card";
... ...
cpu@0 { simple-audio-card,cpu@0 {
sound-dai = <&rcar_sound 0>; sound-dai = <&rcar_sound 0>;
}; };
cpu@1 { simple-audio-card,cpu@1 {
sound-dai = <&rcar_sound 1>; sound-dai = <&rcar_sound 1>;
}; };
codec { simple-audio-card,codec {
... ...
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment