ARM: at91: dts: add MCI DMA support

Add DMA resources to MCI nodes.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[nicolas.ferre@atmel.com: correct 9g45, 9n12 dma phandle name]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -513,6 +513,8 @@ mmc0: mmc@fff80000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
 				interrupts = <11 4 0>;
+				dmas = <&dma 1 0>;
+				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -522,6 +524,8 @@ mmc1: mmc@fffd0000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfffd0000 0x600>;
 				interrupts = <29 4 0>;
+				dmas = <&dma 1 13>;
+				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -89,6 +89,8 @@ mmc0: mmc@f0008000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;
 				interrupts = <12 4 0>;
+				dmas = <&dma 1 0>;
+				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -377,6 +377,8 @@ mmc0: mmc@f0008000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf0008000 0x600>;
 				interrupts = <12 4 0>;
+				dmas = <&dma0 1 0>;
+				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -386,6 +388,8 @@ mmc1: mmc@f000c000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf000c000 0x600>;
 				interrupts = <26 4 0>;
+				dmas = <&dma1 1 0>;
+				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";

arch/arm/boot/dts/sama5d3.dtsi

@@ -60,6 +60,8 @@ mmc0: mmc@f0000000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf0000000 0x600>;
 				interrupts = <21 4 0>;
+				dmas = <&dma0 2 0>;
+				dma-names = "rxtx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
 				status = "disabled";
@@ -173,6 +175,8 @@ mmc1: mmc@f8000000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf8000000 0x600>;
 				interrupts = <22 4 0>;
+				dmas = <&dma1 2 0>;
+				dma-names = "rxtx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
 				status = "disabled";
@@ -184,6 +188,8 @@ mmc2: mmc@f8004000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf8004000 0x600>;
 				interrupts = <23 4 0>;
+				dmas = <&dma1 2 1>;
+				dma-names = "rxtx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
 				status = "disabled";