Skip to content

L
linux
Commit 08d183e3 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux 

Pull powerpc updates from Michael Ellerman:

 - disable the 32-bit vdso when building LE, so we can build with a
   64-bit only toolchain.

 - EEH fixes from Gavin & Richard.

 - enable the sys_kcmp syscall from Laurent.

 - sysfs control for fastsleep workaround from Shreyas.

 - expose OPAL events as an irq chip by Alistair.

 - MSI ops moved to pci_controller_ops by Daniel.

 - fix for kernel to userspace backtraces for perf from Anton.

 - merge pseries and pseries_le defconfigs from Cyril.

 - CXL in-kernel API from Mikey.

 - OPAL prd driver from Jeremy.

 - fix for DSCR handling & tests from Anshuman.

 - Powernv flash mtd driver from Cyril.

 - dynamic DMA Window support on powernv from Alexey.

 - LLVM clang fixes & workarounds from Anton.

 - reworked version of the patch to abort syscalls when transactional.

 - fix the swap encoding to support 4TB, from Aneesh.

 - various fixes as usual.

 - Freescale updates from Scott: Highlights include more 8xx
   optimizations, an e6500 hugetlb optimization, QMan device tree nodes,
   t1024/t1023 support, and various fixes and cleanup.

* tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits)
  cxl: Fix typo in debug print
  cxl: Add CXL_KERNEL_API config option
  powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma()
  powerpc/mm: Change the swap encoding in pte.
  powerpc/mm: PTE_RPN_MAX is not used, remove the same
  powerpc/tm: Abort syscalls in active transactions
  powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off
  powerpc/include: Add opal-prd to installed uapi headers
  powerpc/powernv: fix construction of opal PRD messages
  powerpc/powernv: Increase opal-irqchip initcall priority
  powerpc: Make doorbell check preemption safe
  powerpc/powernv: pnv_init_idle_states() should only run on powernv
  macintosh/nvram: Remove as unused
  powerpc: Don't use gcc specific options on clang
  powerpc: Don't use -mno-strict-align on clang
  powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it
  powerpc: Only use -mabi=altivec if toolchain supports it
  powerpc: Fix duplicate const clang warning in user access code
  vfio: powerpc/spapr: Support Dynamic DMA windows
  vfio: powerpc/spapr: Register memory and define IOMMU v2
  ...
parents 4b1f2af6 6096f884
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 9258 additions and 2216 deletions
Documentation/ABI/testing/sysfs-class-cxl
View file @ 08d183e3
...@@ -6,6 +6,17 @@ Example: The real path of the attribute /sys/class/cxl/afu0.0s/irqs_max is ...@@ -6,6 +6,17 @@ Example: The real path of the attribute /sys/class/cxl/afu0.0s/irqs_max is
Slave contexts (eg. /sys/class/cxl/afu0.0s): Slave contexts (eg. /sys/class/cxl/afu0.0s):
What: /sys/class/cxl/<afu>/afu_err_buf
Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org
Description: read only
AFU Error Buffer contents. The contents of this file are
application specific and depends on the AFU being used.
Applications interacting with the AFU can use this attribute
to know about the current error condition and take appropriate
action like logging the event etc.
What: /sys/class/cxl/<afu>/irqs_max What: /sys/class/cxl/<afu>/irqs_max
Date: September 2014 Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org Contact: linuxppc-dev@lists.ozlabs.org
...@@ -15,6 +26,7 @@ Description: read/write ...@@ -15,6 +26,7 @@ Description: read/write
that hardware can support (eg. 2037). Write values will limit that hardware can support (eg. 2037). Write values will limit
userspace applications to that many userspace interrupts. Must userspace applications to that many userspace interrupts. Must
be >= irqs_min. be >= irqs_min.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/irqs_min What: /sys/class/cxl/<afu>/irqs_min
Date: September 2014 Date: September 2014
...@@ -24,6 +36,7 @@ Description: read only ...@@ -24,6 +36,7 @@ Description: read only
userspace must request on a CXL_START_WORK ioctl. Userspace may userspace must request on a CXL_START_WORK ioctl. Userspace may
omit the num_interrupts field in the START_WORK IOCTL to get omit the num_interrupts field in the START_WORK IOCTL to get
this minimum automatically. this minimum automatically.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/mmio_size What: /sys/class/cxl/<afu>/mmio_size
Date: September 2014 Date: September 2014
...@@ -31,6 +44,7 @@ Contact: linuxppc-dev@lists.ozlabs.org ...@@ -31,6 +44,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only Description: read only
Decimal value of the size of the MMIO space that may be mmaped Decimal value of the size of the MMIO space that may be mmaped
by userspace. by userspace.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/modes_supported What: /sys/class/cxl/<afu>/modes_supported
Date: September 2014 Date: September 2014
...@@ -38,6 +52,7 @@ Contact: linuxppc-dev@lists.ozlabs.org ...@@ -38,6 +52,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only Description: read only
List of the modes this AFU supports. One per line. List of the modes this AFU supports. One per line.
Valid entries are: "dedicated_process" and "afu_directed" Valid entries are: "dedicated_process" and "afu_directed"
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/mode What: /sys/class/cxl/<afu>/mode
Date: September 2014 Date: September 2014
...@@ -46,6 +61,7 @@ Description: read/write ...@@ -46,6 +61,7 @@ Description: read/write
The current mode the AFU is using. Will be one of the modes The current mode the AFU is using. Will be one of the modes
given in modes_supported. Writing will change the mode given in modes_supported. Writing will change the mode
provided that no user contexts are attached. provided that no user contexts are attached.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/prefault_mode What: /sys/class/cxl/<afu>/prefault_mode
...@@ -59,6 +75,7 @@ Description: read/write ...@@ -59,6 +75,7 @@ Description: read/write
descriptor as an effective address and descriptor as an effective address and
prefault what it points to. prefault what it points to.
all: all segments process calling START_WORK maps. all: all segments process calling START_WORK maps.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/reset What: /sys/class/cxl/<afu>/reset
Date: September 2014 Date: September 2014
...@@ -66,12 +83,14 @@ Contact: linuxppc-dev@lists.ozlabs.org ...@@ -66,12 +83,14 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: write only Description: write only
Writing 1 here will reset the AFU provided there are not Writing 1 here will reset the AFU provided there are not
contexts active on the AFU. contexts active on the AFU.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/api_version What: /sys/class/cxl/<afu>/api_version
Date: September 2014 Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org Contact: linuxppc-dev@lists.ozlabs.org
Description: read only Description: read only
Decimal value of the current version of the kernel/user API. Decimal value of the current version of the kernel/user API.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/api_version_compatible What: /sys/class/cxl/<afu>/api_version_compatible
Date: September 2014 Date: September 2014
...@@ -79,6 +98,7 @@ Contact: linuxppc-dev@lists.ozlabs.org ...@@ -79,6 +98,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only Description: read only
Decimal value of the the lowest version of the userspace API Decimal value of the the lowest version of the userspace API
this this kernel supports. this this kernel supports.
Users: https://github.com/ibm-capi/libcxl
AFU configuration records (eg. /sys/class/cxl/afu0.0/cr0): AFU configuration records (eg. /sys/class/cxl/afu0.0/cr0):
...@@ -92,6 +112,7 @@ Contact: linuxppc-dev@lists.ozlabs.org ...@@ -92,6 +112,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only Description: read only
Hexadecimal value of the vendor ID found in this AFU Hexadecimal value of the vendor ID found in this AFU
configuration record. configuration record.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/cr<config num>/device What: /sys/class/cxl/<afu>/cr<config num>/device
Date: February 2015 Date: February 2015
...@@ -99,6 +120,7 @@ Contact: linuxppc-dev@lists.ozlabs.org ...@@ -99,6 +120,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only Description: read only
Hexadecimal value of the device ID found in this AFU Hexadecimal value of the device ID found in this AFU
configuration record. configuration record.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/cr<config num>/class What: /sys/class/cxl/<afu>/cr<config num>/class
Date: February 2015 Date: February 2015
...@@ -106,6 +128,7 @@ Contact: linuxppc-dev@lists.ozlabs.org ...@@ -106,6 +128,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only Description: read only
Hexadecimal value of the class code found in this AFU Hexadecimal value of the class code found in this AFU
configuration record. configuration record.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>/cr<config num>/config What: /sys/class/cxl/<afu>/cr<config num>/config
Date: February 2015 Date: February 2015
...@@ -115,6 +138,7 @@ Description: read only ...@@ -115,6 +138,7 @@ Description: read only
record. The format is expected to match the either the standard record. The format is expected to match the either the standard
or extended configuration space defined by the PCIe or extended configuration space defined by the PCIe
specification. specification.
Users: https://github.com/ibm-capi/libcxl
...@@ -126,18 +150,21 @@ Contact: linuxppc-dev@lists.ozlabs.org ...@@ -126,18 +150,21 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only Description: read only
Decimal value of the size of the MMIO space that may be mmaped Decimal value of the size of the MMIO space that may be mmaped
by userspace. This includes all slave contexts space also. by userspace. This includes all slave contexts space also.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>m/pp_mmio_len What: /sys/class/cxl/<afu>m/pp_mmio_len
Date: September 2014 Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org Contact: linuxppc-dev@lists.ozlabs.org
Description: read only Description: read only
Decimal value of the Per Process MMIO space length. Decimal value of the Per Process MMIO space length.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<afu>m/pp_mmio_off What: /sys/class/cxl/<afu>m/pp_mmio_off
Date: September 2014 Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org Contact: linuxppc-dev@lists.ozlabs.org
Description: read only Description: read only
Decimal value of the Per Process MMIO space offset. Decimal value of the Per Process MMIO space offset.
Users: https://github.com/ibm-capi/libcxl
Card info (eg. /sys/class/cxl/card0) Card info (eg. /sys/class/cxl/card0)
...@@ -147,12 +174,14 @@ Date: September 2014 ...@@ -147,12 +174,14 @@ Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org Contact: linuxppc-dev@lists.ozlabs.org
Description: read only Description: read only
Identifies the CAIA Version the card implements. Identifies the CAIA Version the card implements.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<card>/psl_revision What: /sys/class/cxl/<card>/psl_revision
Date: September 2014 Date: September 2014
Contact: linuxppc-dev@lists.ozlabs.org Contact: linuxppc-dev@lists.ozlabs.org
Description: read only Description: read only
Identifies the revision level of the PSL. Identifies the revision level of the PSL.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<card>/base_image What: /sys/class/cxl/<card>/base_image
Date: September 2014 Date: September 2014
...@@ -162,6 +191,7 @@ Description: read only ...@@ -162,6 +191,7 @@ Description: read only
that support loadable PSLs. For FPGAs this field identifies that support loadable PSLs. For FPGAs this field identifies
the image contained in the on-adapter flash which is loaded the image contained in the on-adapter flash which is loaded
during the initial program load. during the initial program load.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<card>/image_loaded What: /sys/class/cxl/<card>/image_loaded
Date: September 2014 Date: September 2014
...@@ -169,6 +199,7 @@ Contact: linuxppc-dev@lists.ozlabs.org ...@@ -169,6 +199,7 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: read only Description: read only
Will return "user" or "factory" depending on the image loaded Will return "user" or "factory" depending on the image loaded
onto the card. onto the card.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<card>/load_image_on_perst What: /sys/class/cxl/<card>/load_image_on_perst
Date: December 2014 Date: December 2014
...@@ -183,6 +214,7 @@ Description: read/write ...@@ -183,6 +214,7 @@ Description: read/write
user or factory image to be loaded. user or factory image to be loaded.
Default is to reload on PERST whichever image the card has Default is to reload on PERST whichever image the card has
loaded. loaded.
Users: https://github.com/ibm-capi/libcxl
What: /sys/class/cxl/<card>/reset What: /sys/class/cxl/<card>/reset
Date: October 2014 Date: October 2014
...@@ -190,3 +222,4 @@ Contact: linuxppc-dev@lists.ozlabs.org ...@@ -190,3 +222,4 @@ Contact: linuxppc-dev@lists.ozlabs.org
Description: write only Description: write only
Writing 1 will issue a PERST to card which may cause the card Writing 1 will issue a PERST to card which may cause the card
to reload the FPGA depending on load_image_on_perst. to reload the FPGA depending on load_image_on_perst.
Users: https://github.com/ibm-capi/libcxl
Documentation/devicetree/bindings/powerpc/fsl/fman.txt
View file @ 08d183e3
...@@ -189,6 +189,19 @@ PROPERTIES ...@@ -189,6 +189,19 @@ PROPERTIES
Definition: There is one reg region describing the port Definition: There is one reg region describing the port
configuration registers. configuration registers.
- fsl,fman-10g-port
Usage: optional
Value type: boolean
Definition: The default port rate is 1G.
If this property exists, the port is s 10G port.
- fsl,fman-best-effort-port
Usage: optional
Value type: boolean
Definition: Can be defined only if 10G-support is set.
This property marks a best-effort 10G port (10G port that
may not be capable of line rate).
EXAMPLE EXAMPLE
port@a8000 { port@a8000 {
......
Documentation/devicetree/bindings/powerpc/fsl/guts.txt
View file @ 08d183e3
...@@ -9,6 +9,11 @@ Required properties: ...@@ -9,6 +9,11 @@ Required properties:
- compatible : Should define the compatible device type for - compatible : Should define the compatible device type for
global-utilities. global-utilities.
Possible compatibles:
"fsl,qoriq-device-config-1.0"
"fsl,qoriq-device-config-2.0"
"fsl,<chip>-device-config"
"fsl,<chip>-guts"
- reg : Offset and length of the register set for the device. - reg : Offset and length of the register set for the device.
Recommended properties: Recommended properties:
......
Documentation/devicetree/bindings/soc/fsl/qman-portals.txt
View file @ 08d183e3
...@@ -47,7 +47,7 @@ PROPERTIES ...@@ -47,7 +47,7 @@ PROPERTIES
For additional details about the PAMU/LIODN binding(s) see pamu.txt For additional details about the PAMU/LIODN binding(s) see pamu.txt
- fsl,qman-channel-id - cell-index
Usage: Required Usage: Required
Value type: <u32> Value type: <u32>
Definition: The hardware index of the channel. This can also be Definition: The hardware index of the channel. This can also be
...@@ -136,7 +136,7 @@ The example below shows a (P4080) QMan portals container/bus node with two porta ...@@ -136,7 +136,7 @@ The example below shows a (P4080) QMan portals container/bus node with two porta
reg = <0x4000 0x4000>, <0x101000 0x1000>; reg = <0x4000 0x4000>, <0x101000 0x1000>;
interrupts = <106 2 0 0>; interrupts = <106 2 0 0>;
fsl,liodn = <3 4>; fsl,liodn = <3 4>;
fsl,qman-channel-id = <1>; cell-index = <1>;
fman0 { fman0 {
fsl,liodn = <0x22>; fsl,liodn = <0x22>;
......
Documentation/powerpc/00-INDEX
View file @ 08d183e3
...@@ -30,3 +30,5 @@ ptrace.txt ...@@ -30,3 +30,5 @@ ptrace.txt
- Information on the ptrace interfaces for hardware debug registers. - Information on the ptrace interfaces for hardware debug registers.
transactional_memory.txt transactional_memory.txt
- Overview of the Power8 transactional memory support. - Overview of the Power8 transactional memory support.
dscr.txt
- Overview DSCR (Data Stream Control Register) support.
Documentation/powerpc/cxl.txt
View file @ 08d183e3
...@@ -133,6 +133,9 @@ User API ...@@ -133,6 +133,9 @@ User API
The following file operations are supported on both slave and The following file operations are supported on both slave and
master devices. master devices.
A userspace library libcxl is avaliable here:
https://github.com/ibm-capi/libcxl
This provides a C interface to this kernel API.
open open
---- ----
...@@ -366,6 +369,7 @@ Sysfs Class ...@@ -366,6 +369,7 @@ Sysfs Class
enumeration and tuning of the accelerators. Its layout is enumeration and tuning of the accelerators. Its layout is
described in Documentation/ABI/testing/sysfs-class-cxl described in Documentation/ABI/testing/sysfs-class-cxl
Udev rules Udev rules
========== ==========
......
Documentation/powerpc/dscr.txt 0 → 100644
View file @ 08d183e3
DSCR (Data Stream Control Register)
================================================
DSCR register in powerpc allows user to have some control of prefetch of data
stream in the processor. Please refer to the ISA documents or related manual
for more detailed information regarding how to use this DSCR to attain this
control of the pefetches . This document here provides an overview of kernel
support for DSCR, related kernel objects, it's functionalities and exported
user interface.
(A) Data Structures:
(1) thread_struct:
dscr /* Thread DSCR value */
dscr_inherit /* Thread has changed default DSCR */
(2) PACA:
dscr_default /* per-CPU DSCR default value */
(3) sysfs.c:
dscr_default /* System DSCR default value */
(B) Scheduler Changes:
Scheduler will write the per-CPU DSCR default which is stored in the
CPU's PACA value into the register if the thread has dscr_inherit value
cleared which means that it has not changed the default DSCR till now.
If the dscr_inherit value is set which means that it has changed the
default DSCR value, scheduler will write the changed value which will
now be contained in thread struct's dscr into the register instead of
the per-CPU default PACA based DSCR value.
NOTE: Please note here that the system wide global DSCR value never
gets used directly in the scheduler process context switch at all.
(C) SYSFS Interface:
Global DSCR default: /sys/devices/system/cpu/dscr_default
CPU specific DSCR default: /sys/devices/system/cpu/cpuN/dscr
Changing the global DSCR default in the sysfs will change all the CPU
specific DSCR defaults immediately in their PACA structures. Again if
the current process has the dscr_inherit clear, it also writes the new
value into every CPU's DSCR register right away and updates the current
thread's DSCR value as well.
Changing the CPU specif DSCR default value in the sysfs does exactly
the same thing as above but unlike the global one above, it just changes
stuff for that particular CPU instead for all the CPUs on the system.
(D) User Space Instructions:
The DSCR register can be accessed in the user space using any of these
two SPR numbers available for that purpose.
(1) Problem state SPR: 0x03 (Un-privileged, POWER8 only)
(2) Privileged state SPR: 0x11 (Privileged)
Accessing DSCR through privileged SPR number (0x11) from user space
works, as it is emulated following an illegal instruction exception
inside the kernel. Both mfspr and mtspr instructions are emulated.
Accessing DSCR through user level SPR (0x03) from user space will first
create a facility unavailable exception. Inside this exception handler
all mfspr isntruction based read attempts will get emulated and returned
where as the first mtspr instruction based write attempts will enable
the DSCR facility for the next time around (both for read and write) by
setting DSCR facility in the FSCR register.
(E) Specifics about 'dscr_inherit':
The thread struct element 'dscr_inherit' represents whether the thread
in question has attempted and changed the DSCR itself using any of the
following methods. This element signifies whether the thread wants to
use the CPU default DSCR value or its own changed DSCR value in the
kernel.
(1) mtspr instruction (SPR number 0x03)
(2) mtspr instruction (SPR number 0x11)
(3) ptrace interface (Explicitly set user DSCR value)
Any child of the process created after this event in the process inherits
this same behaviour as well.
Documentation/powerpc/transactional_memory.txt
View file @ 08d183e3
...@@ -74,22 +74,23 @@ Causes of transaction aborts ...@@ -74,22 +74,23 @@ Causes of transaction aborts
Syscalls Syscalls
======== ========
Performing syscalls from within transaction is not recommended, and can lead Syscalls made from within an active transaction will not be performed and the
to unpredictable results. transaction will be doomed by the kernel with the failure code TM_CAUSE_SYSCALL
| TM_CAUSE_PERSISTENT.
Syscalls do not by design abort transactions, but beware: The kernel code will Syscalls made from within a suspended transaction are performed as normal and
not be running in transactional state. The effect of syscalls will always the transaction is not explicitly doomed by the kernel. However, what the
remain visible, but depending on the call they may abort your transaction as a kernel does to perform the syscall may result in the transaction being doomed
side-effect, read soon-to-be-aborted transactional data that should not remain by the hardware. The syscall is performed in suspended mode so any side
invisible, etc. If you constantly retry a transaction that constantly aborts effects will be persistent, independent of transaction success or failure. No
itself by calling a syscall, you'll have a livelock & make no progress. guarantees are provided by the kernel about which syscalls will affect
transaction success.
Simple syscalls (e.g. sigprocmask()) "could" be OK. Even things like write() Care must be taken when relying on syscalls to abort during active transactions
from, say, printf() should be OK as long as the kernel does not access any if the calls are made via a library. Libraries may cache values (which may
memory that was accessed transactionally. give the appearance of success) or perform operations that cause transaction
failure before entering the kernel (which may produce different failure codes).
Consider any syscalls that happen to work as debug-only -- not recommended for Examples are glibc's getpid() and lazy symbol resolution.
production use. Best to queue them up till after the transaction is over.
Signals Signals
...@@ -176,8 +177,7 @@ kernel aborted a transaction: ...@@ -176,8 +177,7 @@ kernel aborted a transaction:
TM_CAUSE_RESCHED Thread was rescheduled. TM_CAUSE_RESCHED Thread was rescheduled.
TM_CAUSE_TLBI Software TLB invalid. TM_CAUSE_TLBI Software TLB invalid.
TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap. TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap.
TM_CAUSE_SYSCALL Currently unused; future syscalls that must abort TM_CAUSE_SYSCALL Syscall from active transaction.
transactions for consistency will use this.
TM_CAUSE_SIGNAL Signal delivered. TM_CAUSE_SIGNAL Signal delivered.
TM_CAUSE_MISC Currently unused. TM_CAUSE_MISC Currently unused.
TM_CAUSE_ALIGNMENT Alignment fault. TM_CAUSE_ALIGNMENT Alignment fault.
......
Documentation/vfio.txt
View file @ 08d183e3
...@@ -289,10 +289,12 @@ PPC64 sPAPR implementation note ...@@ -289,10 +289,12 @@ PPC64 sPAPR implementation note
This implementation has some specifics: This implementation has some specifics:
1) Only one IOMMU group per container is supported as an IOMMU group 1) On older systems (POWER7 with P5IOC2/IODA1) only one IOMMU group per
represents the minimal entity which isolation can be guaranteed for and container is supported as an IOMMU table is allocated at the boot time,
groups are allocated statically, one per a Partitionable Endpoint (PE) one table per a IOMMU group which is a Partitionable Endpoint (PE)
(PE is often a PCI domain but not always). (PE is often a PCI domain but not always).
Newer systems (POWER8 with IODA2) have improved hardware design which allows
to remove this limitation and have multiple IOMMU groups per a VFIO container.
2) The hardware supports so called DMA windows - the PCI address range 2) The hardware supports so called DMA windows - the PCI address range
within which DMA transfer is allowed, any attempt to access address space within which DMA transfer is allowed, any attempt to access address space
...@@ -385,6 +387,18 @@ The code flow from the example above should be slightly changed: ...@@ -385,6 +387,18 @@ The code flow from the example above should be slightly changed:
.... ....
/* Inject EEH error, which is expected to be caused by 32-bits
* config load.
*/
pe_op.op = VFIO_EEH_PE_INJECT_ERR;
pe_op.err.type = EEH_ERR_TYPE_32;
pe_op.err.func = EEH_ERR_FUNC_LD_CFG_ADDR;
pe_op.err.addr = 0ul;
pe_op.err.mask = 0ul;
ioctl(container, VFIO_EEH_PE_OP, &pe_op);
....
/* When 0xFF's returned from reading PCI config space or IO BARs /* When 0xFF's returned from reading PCI config space or IO BARs
* of the PCI device. Check the PE's state to see if that has been * of the PCI device. Check the PE's state to see if that has been
* frozen. * frozen.
...@@ -427,6 +441,48 @@ The code flow from the example above should be slightly changed: ...@@ -427,6 +441,48 @@ The code flow from the example above should be slightly changed:
.... ....
5) There is v2 of SPAPR TCE IOMMU. It deprecates VFIO_IOMMU_ENABLE/
VFIO_IOMMU_DISABLE and implements 2 new ioctls:
VFIO_IOMMU_SPAPR_REGISTER_MEMORY and VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY
(which are unsupported in v1 IOMMU).
PPC64 paravirtualized guests generate a lot of map/unmap requests,
and the handling of those includes pinning/unpinning pages and updating
mm::locked_vm counter to make sure we do not exceed the rlimit.
The v2 IOMMU splits accounting and pinning into separate operations:
- VFIO_IOMMU_SPAPR_REGISTER_MEMORY/VFIO_IOMMU_SPAPR_UNREGISTER_MEMORY ioctls
receive a user space address and size of the block to be pinned.
Bisecting is not supported and VFIO_IOMMU_UNREGISTER_MEMORY is expected to
be called with the exact address and size used for registering
the memory block. The userspace is not expected to call these often.
The ranges are stored in a linked list in a VFIO container.
- VFIO_IOMMU_MAP_DMA/VFIO_IOMMU_UNMAP_DMA ioctls only update the actual
IOMMU table and do not do pinning; instead these check that the userspace
address is from pre-registered range.
This separation helps in optimizing DMA for guests.
6) sPAPR specification allows guests to have an additional DMA window(s) on
a PCI bus with a variable page size. Two ioctls have been added to support
this: VFIO_IOMMU_SPAPR_TCE_CREATE and VFIO_IOMMU_SPAPR_TCE_REMOVE.
The platform has to support the functionality or error will be returned to
the userspace. The existing hardware supports up to 2 DMA windows, one is
2GB long, uses 4K pages and called "default 32bit window"; the other can
be as big as entire RAM, use different page size, it is optional - guests
create those in run-time if the guest driver supports 64bit DMA.
VFIO_IOMMU_SPAPR_TCE_CREATE receives a page shift, a DMA window size and
a number of TCE table levels (if a TCE table is going to be big enough and
the kernel may not be able to allocate enough of physically contiguous memory).
It creates a new window in the available slot and returns the bus address where
the new window starts. Due to hardware limitation, the user space cannot choose
the location of DMA windows.
VFIO_IOMMU_SPAPR_TCE_REMOVE receives the bus start address of the window
and removes it.
------------------------------------------------------------------------------- -------------------------------------------------------------------------------
[1] VFIO was originally an acronym for "Virtual Function I/O" in its [1] VFIO was originally an acronym for "Virtual Function I/O" in its
......
MAINTAINERS
View file @ 08d183e3
...@@ -2464,7 +2464,6 @@ F: Documentation/devicetree/bindings/net/ieee802154/cc2520.txt ...@@ -2464,7 +2464,6 @@ F: Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
CELL BROADBAND ENGINE ARCHITECTURE CELL BROADBAND ENGINE ARCHITECTURE
M: Arnd Bergmann <arnd@arndb.de> M: Arnd Bergmann <arnd@arndb.de>
L: linuxppc-dev@lists.ozlabs.org L: linuxppc-dev@lists.ozlabs.org
L: cbe-oss-dev@lists.ozlabs.org
W: http://www.ibm.com/developerworks/power/cell/ W: http://www.ibm.com/developerworks/power/cell/
S: Supported S: Supported
F: arch/powerpc/include/asm/cell*.h F: arch/powerpc/include/asm/cell*.h
...@@ -2979,7 +2978,7 @@ M: Michael Neuling <mikey@neuling.org> ...@@ -2979,7 +2978,7 @@ M: Michael Neuling <mikey@neuling.org>
L: linuxppc-dev@lists.ozlabs.org L: linuxppc-dev@lists.ozlabs.org
S: Supported S: Supported
F: drivers/misc/cxl/ F: drivers/misc/cxl/
F: include/misc/cxl.h F: include/misc/cxl*
F: include/uapi/misc/cxl.h F: include/uapi/misc/cxl.h
F: Documentation/powerpc/cxl.txt F: Documentation/powerpc/cxl.txt
F: Documentation/powerpc/cxl.txt F: Documentation/powerpc/cxl.txt
...@@ -7914,14 +7913,13 @@ F: drivers/net/wireless/prism54/ ...@@ -7914,14 +7913,13 @@ F: drivers/net/wireless/prism54/
PS3 NETWORK SUPPORT PS3 NETWORK SUPPORT
M: Geoff Levand <geoff@infradead.org> M: Geoff Levand <geoff@infradead.org>
L: netdev@vger.kernel.org L: netdev@vger.kernel.org
L: cbe-oss-dev@lists.ozlabs.org L: linuxppc-dev@lists.ozlabs.org
S: Maintained S: Maintained
F: drivers/net/ethernet/toshiba/ps3_gelic_net.* F: drivers/net/ethernet/toshiba/ps3_gelic_net.*
PS3 PLATFORM SUPPORT PS3 PLATFORM SUPPORT
M: Geoff Levand <geoff@infradead.org> M: Geoff Levand <geoff@infradead.org>
L: linuxppc-dev@lists.ozlabs.org L: linuxppc-dev@lists.ozlabs.org
L: cbe-oss-dev@lists.ozlabs.org
S: Maintained S: Maintained
F: arch/powerpc/boot/ps3* F: arch/powerpc/boot/ps3*
F: arch/powerpc/include/asm/lv1call.h F: arch/powerpc/include/asm/lv1call.h
...@@ -7935,7 +7933,7 @@ F: sound/ppc/snd_ps3* ...@@ -7935,7 +7933,7 @@ F: sound/ppc/snd_ps3*
PS3VRAM DRIVER PS3VRAM DRIVER
M: Jim Paris <jim@jtan.com> M: Jim Paris <jim@jtan.com>
L: cbe-oss-dev@lists.ozlabs.org L: linuxppc-dev@lists.ozlabs.org
S: Maintained S: Maintained
F: drivers/block/ps3vram.c F: drivers/block/ps3vram.c
...@@ -9420,7 +9418,6 @@ F: drivers/net/ethernet/toshiba/spider_net* ...@@ -9420,7 +9418,6 @@ F: drivers/net/ethernet/toshiba/spider_net*
SPU FILE SYSTEM SPU FILE SYSTEM
M: Jeremy Kerr <jk@ozlabs.org> M: Jeremy Kerr <jk@ozlabs.org>
L: linuxppc-dev@lists.ozlabs.org L: linuxppc-dev@lists.ozlabs.org
L: cbe-oss-dev@lists.ozlabs.org
W: http://www.ibm.com/developerworks/power/cell/ W: http://www.ibm.com/developerworks/power/cell/
S: Supported S: Supported
F: Documentation/filesystems/spufs.txt F: Documentation/filesystems/spufs.txt
......
arch/powerpc/Kconfig.debug
View file @ 08d183e3
...@@ -19,6 +19,14 @@ config PPC_WERROR ...@@ -19,6 +19,14 @@ config PPC_WERROR
depends on !PPC_DISABLE_WERROR depends on !PPC_DISABLE_WERROR
default y default y
config STRICT_MM_TYPECHECKS
bool "Do extra type checking on mm types"
default n
help
This option turns on extra type checking for some mm related types.
If you don't know what this means, say N.
config PRINT_STACK_DEPTH config PRINT_STACK_DEPTH
int "Stack depth to print" if DEBUG_KERNEL int "Stack depth to print" if DEBUG_KERNEL
default 64 default 64
......
arch/powerpc/Makefile
View file @ 08d183e3
...@@ -66,7 +66,10 @@ endif ...@@ -66,7 +66,10 @@ endif
UTS_MACHINE := $(OLDARCH) UTS_MACHINE := $(OLDARCH)
ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y) ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
override CC += -mlittle-endian -mno-strict-align override CC += -mlittle-endian
ifneq ($(COMPILER),clang)
override CC += -mno-strict-align
endif
override AS += -mlittle-endian override AS += -mlittle-endian
override LD += -EL override LD += -EL
override CROSS32CC += -mlittle-endian override CROSS32CC += -mlittle-endian
...@@ -113,14 +116,14 @@ else ...@@ -113,14 +116,14 @@ else
endif endif
endif endif
CFLAGS-$(CONFIG_PPC64) := -mtraceback=no CFLAGS-$(CONFIG_PPC64) := $(call cc-option,-mtraceback=no)
ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y) ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2,-mcall-aixdesc) CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2,$(call cc-option,-mcall-aixdesc))
AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2) AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2)
else else
CFLAGS-$(CONFIG_PPC64) += -mcall-aixdesc CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcall-aixdesc)
endif endif
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcmodel=medium,-mminimal-toc) CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcmodel=medium,$(call cc-option,-mminimal-toc))
CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions) CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions)
CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 $(MULTIPLEWORD) CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 $(MULTIPLEWORD)
...@@ -160,7 +163,8 @@ asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1) ...@@ -160,7 +163,8 @@ asinstr := $(call as-instr,lis 9$(comma)foo@high,-DHAVE_AS_ATHIGH=1)
KBUILD_CPPFLAGS += -Iarch/$(ARCH) $(asinstr) KBUILD_CPPFLAGS += -Iarch/$(ARCH) $(asinstr)
KBUILD_AFLAGS += -Iarch/$(ARCH) $(AFLAGS-y) KBUILD_AFLAGS += -Iarch/$(ARCH) $(AFLAGS-y)
KBUILD_CFLAGS += -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y) KBUILD_CFLAGS += $(call cc-option,-msoft-float)
KBUILD_CFLAGS += -pipe -Iarch/$(ARCH) $(CFLAGS-y)
CPP = $(CC) -E $(KBUILD_CFLAGS) CPP = $(CC) -E $(KBUILD_CFLAGS)
CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__ CHECKFLAGS += -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
...@@ -192,7 +196,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm) ...@@ -192,7 +196,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
# Never use string load/store instructions as they are # Never use string load/store instructions as they are
# often slow when they are implemented at all # often slow when they are implemented at all
KBUILD_CFLAGS += -mno-string KBUILD_CFLAGS += $(call cc-option,-mno-string)
ifeq ($(CONFIG_6xx),y) ifeq ($(CONFIG_6xx),y)
KBUILD_CFLAGS += -mcpu=powerpc KBUILD_CFLAGS += -mcpu=powerpc
...@@ -269,6 +273,21 @@ bootwrapper_install: ...@@ -269,6 +273,21 @@ bootwrapper_install:
%.dtb: scripts %.dtb: scripts
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@) $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
# Used to create 'merged defconfigs'
# To use it $(call) it with the first argument as the base defconfig
# and the second argument as a space separated list of .config files to merge,
# without the .config suffix.
define merge_into_defconfig
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
-m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/$(1) \
$(foreach config,$(2),$(srctree)/arch/$(ARCH)/configs/$(config).config)
+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
endef
PHONY += pseries_le_defconfig
pseries_le_defconfig:
$(call merge_into_defconfig,pseries_defconfig,le)
define archhelp define archhelp
@echo '* zImage - Build default images selected by kernel config' @echo '* zImage - Build default images selected by kernel config'
@echo ' zImage.* - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)' @echo ' zImage.* - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
...@@ -314,7 +333,8 @@ TOUT := .tmp_gas_check ...@@ -314,7 +333,8 @@ TOUT := .tmp_gas_check
# - Require gcc 4.0 or above on 64-bit # - Require gcc 4.0 or above on 64-bit
# - gcc-4.2.0 has issues compiling modules on 64-bit # - gcc-4.2.0 has issues compiling modules on 64-bit
checkbin: checkbin:
@if test "$(cc-version)" = "0304" ; then \ @if test "${COMPILER}" != "clang" \
&& test "$(cc-version)" = "0304" ; then \
if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \ if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \
echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build '; \ echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build '; \
echo 'correctly with gcc-3.4 and your version of binutils.'; \ echo 'correctly with gcc-3.4 and your version of binutils.'; \
...@@ -322,13 +342,15 @@ checkbin: ...@@ -322,13 +342,15 @@ checkbin:
false; \ false; \
fi ; \ fi ; \
fi fi
@if test "$(cc-version)" -lt "0400" \ @if test "${COMPILER}" != "clang" \
&& test "$(cc-version)" -lt "0400" \
&& test "x${CONFIG_PPC64}" = "xy" ; then \ && test "x${CONFIG_PPC64}" = "xy" ; then \
echo -n "Sorry, GCC v4.0 or above is required to build " ; \ echo -n "Sorry, GCC v4.0 or above is required to build " ; \
echo "the 64-bit powerpc kernel." ; \ echo "the 64-bit powerpc kernel." ; \
false ; \ false ; \
fi fi
@if test "$(cc-fullversion)" = "040200" \ @if test "${COMPILER}" != "clang" \
&& test "$(cc-fullversion)" = "040200" \
&& test "x${CONFIG_MODULES}${CONFIG_PPC64}" = "xyy" ; then \ && test "x${CONFIG_MODULES}${CONFIG_PPC64}" = "xyy" ; then \
echo -n '*** GCC-4.2.0 cannot compile the 64-bit powerpc ' ; \ echo -n '*** GCC-4.2.0 cannot compile the 64-bit powerpc ' ; \
echo 'kernel with modules enabled.' ; \ echo 'kernel with modules enabled.' ; \
...@@ -336,6 +358,14 @@ checkbin: ...@@ -336,6 +358,14 @@ checkbin:
echo 'disable kernel modules' ; \ echo 'disable kernel modules' ; \
false ; \ false ; \
fi fi
@if test "x${CONFIG_CPU_LITTLE_ENDIAN}" = "xy" \
&& $(LD) --version | head -1 | grep ' 2\.24$$' >/dev/null ; then \
echo -n '*** binutils 2.24 miscompiles weak symbols ' ; \
echo 'in some circumstances.' ; \
echo -n '*** Please use a different binutils version.' ; \
false ; \
fi
CLEAN_FILES += $(TOUT) CLEAN_FILES += $(TOUT)
arch/powerpc/boot/dts/b4qds.dtsi
View file @ 08d183e3
...@@ -106,6 +106,14 @@ bman_fbpr: bman-fbpr { ...@@ -106,6 +106,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
dcsr: dcsr@f00000000 { dcsr: dcsr@f00000000 {
...@@ -116,6 +124,10 @@ bportals: bman-portals@ff4000000 { ...@@ -116,6 +124,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>; ranges = <0x0 0xf 0xf4000000 0x2000000>;
}; };
qportals: qman-portals@ff6000000 {
ranges = <0x0 0xf 0xf6000000 0x2000000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
View file @ 08d183e3
...@@ -80,20 +80,9 @@ guts: global-utilities@e0000 { ...@@ -80,20 +80,9 @@ guts: global-utilities@e0000 {
compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0"; compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0";
}; };
/include/ "qoriq-clockgen2.dtsi"
global-utilities@e1000 { global-utilities@e1000 {
compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0"; compatible = "fsl,b4420-clockgen", "fsl,b4-clockgen",
"fsl,qoriq-clockgen-2.0";
mux0: mux0@0 {
#clock-cells = <0>;
reg = <0x0 0x4>;
compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
<&pll1 0>, <&pll1 1>, <&pll1 2>;
clock-names = "pll0", "pll0-div2", "pll0-div4",
"pll1", "pll1-div2", "pll1-div4";
clock-output-names = "cmux0";
};
}; };
rcpm: global-utilities@e2000 { rcpm: global-utilities@e2000 {
......
arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
View file @ 08d183e3
...@@ -167,6 +167,75 @@ bman-portal@60000 { ...@@ -167,6 +167,75 @@ bman-portal@60000 {
}; };
}; };
&qportals {
qportal14: qman-portal@38000 {
compatible = "fsl,qman-portal";
reg = <0x38000 0x4000>, <0x100e000 0x1000>;
interrupts = <132 0x2 0 0>;
cell-index = <0xe>;
};
qportal15: qman-portal@3c000 {
compatible = "fsl,qman-portal";
reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
interrupts = <134 0x2 0 0>;
cell-index = <0xf>;
};
qportal16: qman-portal@40000 {
compatible = "fsl,qman-portal";
reg = <0x40000 0x4000>, <0x1010000 0x1000>;
interrupts = <136 0x2 0 0>;
cell-index = <0x10>;
};
qportal17: qman-portal@44000 {
compatible = "fsl,qman-portal";
reg = <0x44000 0x4000>, <0x1011000 0x1000>;
interrupts = <138 0x2 0 0>;
cell-index = <0x11>;
};
qportal18: qman-portal@48000 {
compatible = "fsl,qman-portal";
reg = <0x48000 0x4000>, <0x1012000 0x1000>;
interrupts = <140 0x2 0 0>;
cell-index = <0x12>;
};
qportal19: qman-portal@4c000 {
compatible = "fsl,qman-portal";
reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
interrupts = <142 0x2 0 0>;
cell-index = <0x13>;
};
qportal20: qman-portal@50000 {
compatible = "fsl,qman-portal";
reg = <0x50000 0x4000>, <0x1014000 0x1000>;
interrupts = <144 0x2 0 0>;
cell-index = <0x14>;
};
qportal21: qman-portal@54000 {
compatible = "fsl,qman-portal";
reg = <0x54000 0x4000>, <0x1015000 0x1000>;
interrupts = <146 0x2 0 0>;
cell-index = <0x15>;
};
qportal22: qman-portal@58000 {
compatible = "fsl,qman-portal";
reg = <0x58000 0x4000>, <0x1016000 0x1000>;
interrupts = <148 0x2 0 0>;
cell-index = <0x16>;
};
qportal23: qman-portal@5c000 {
compatible = "fsl,qman-portal";
reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
interrupts = <150 0x2 0 0>;
cell-index = <0x17>;
};
qportal24: qman-portal@60000 {
compatible = "fsl,qman-portal";
reg = <0x60000 0x4000>, <0x1018000 0x1000>;
interrupts = <152 0x2 0 0>;
cell-index = <0x18>;
};
};
&soc { &soc {
ddr2: memory-controller@9000 { ddr2: memory-controller@9000 {
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
...@@ -182,20 +251,9 @@ guts: global-utilities@e0000 { ...@@ -182,20 +251,9 @@ guts: global-utilities@e0000 {
compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0"; compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0";
}; };
/include/ "qoriq-clockgen2.dtsi"
global-utilities@e1000 { global-utilities@e1000 {
compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0"; compatible = "fsl,b4860-clockgen", "fsl,b4-clockgen",
"fsl,qoriq-clockgen-2.0";
mux0: mux0@0 {
#clock-cells = <0>;
reg = <0x0 0x4>;
compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
<&pll1 0>, <&pll1 1>, <&pll1 2>;
clock-names = "pll0", "pll0-div2", "pll0-div4",
"pll1", "pll1-div2", "pll1-div4";
clock-output-names = "cmux0";
};
}; };
rcpm: global-utilities@e2000 { rcpm: global-utilities@e2000 {
......
arch/powerpc/boot/dts/fsl/b4si-post.dtsi
View file @ 08d183e3
...@@ -37,6 +37,16 @@ &bman_fbpr { ...@@ -37,6 +37,16 @@ &bman_fbpr {
alloc-ranges = <0 0 0x10000 0>; alloc-ranges = <0 0 0x10000 0>;
}; };
&qman_fqd {
compatible = "fsl,qman-fqd";
alloc-ranges = <0 0 0x10000 0>;
};
&qman_pfdr {
compatible = "fsl,qman-pfdr";
alloc-ranges = <0 0 0x10000 0>;
};
&ifc { &ifc {
#address-cells = <2>; #address-cells = <2>;
#size-cells = <1>; #size-cells = <1>;
...@@ -210,6 +220,97 @@ bman-portal@34000 { ...@@ -210,6 +220,97 @@ bman-portal@34000 {
}; };
}; };
&qportals {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "simple-bus";
qportal0: qman-portal@0 {
compatible = "fsl,qman-portal";
reg = <0x0 0x4000>, <0x1000000 0x1000>;
interrupts = <104 0x2 0 0>;
cell-index = <0x0>;
};
qportal1: qman-portal@4000 {
compatible = "fsl,qman-portal";
reg = <0x4000 0x4000>, <0x1001000 0x1000>;
interrupts = <106 0x2 0 0>;
cell-index = <0x1>;
};
qportal2: qman-portal@8000 {
compatible = "fsl,qman-portal";
reg = <0x8000 0x4000>, <0x1002000 0x1000>;
interrupts = <108 0x2 0 0>;
cell-index = <0x2>;
};
qportal3: qman-portal@c000 {
compatible = "fsl,qman-portal";
reg = <0xc000 0x4000>, <0x1003000 0x1000>;
interrupts = <110 0x2 0 0>;
cell-index = <0x3>;
};
qportal4: qman-portal@10000 {
compatible = "fsl,qman-portal";
reg = <0x10000 0x4000>, <0x1004000 0x1000>;
interrupts = <112 0x2 0 0>;
cell-index = <0x4>;
};
qportal5: qman-portal@14000 {
compatible = "fsl,qman-portal";
reg = <0x14000 0x4000>, <0x1005000 0x1000>;
interrupts = <114 0x2 0 0>;
cell-index = <0x5>;
};
qportal6: qman-portal@18000 {
compatible = "fsl,qman-portal";
reg = <0x18000 0x4000>, <0x1006000 0x1000>;
interrupts = <116 0x2 0 0>;
cell-index = <0x6>;
};
qportal7: qman-portal@1c000 {
compatible = "fsl,qman-portal";
reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
interrupts = <118 0x2 0 0>;
cell-index = <0x7>;
};
qportal8: qman-portal@20000 {
compatible = "fsl,qman-portal";
reg = <0x20000 0x4000>, <0x1008000 0x1000>;
interrupts = <120 0x2 0 0>;
cell-index = <0x8>;
};
qportal9: qman-portal@24000 {
compatible = "fsl,qman-portal";
reg = <0x24000 0x4000>, <0x1009000 0x1000>;
interrupts = <122 0x2 0 0>;
cell-index = <0x9>;
};
qportal10: qman-portal@28000 {
compatible = "fsl,qman-portal";
reg = <0x28000 0x4000>, <0x100a000 0x1000>;
interrupts = <124 0x2 0 0>;
cell-index = <0xa>;
};
qportal11: qman-portal@2c000 {
compatible = "fsl,qman-portal";
reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
interrupts = <126 0x2 0 0>;
cell-index = <0xb>;
};
qportal12: qman-portal@30000 {
compatible = "fsl,qman-portal";
reg = <0x30000 0x4000>, <0x100c000 0x1000>;
interrupts = <128 0x2 0 0>;
cell-index = <0xc>;
};
qportal13: qman-portal@34000 {
compatible = "fsl,qman-portal";
reg = <0x34000 0x4000>, <0x100d000 0x1000>;
interrupts = <130 0x2 0 0>;
cell-index = <0xd>;
};
};
&soc { &soc {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
...@@ -296,9 +397,21 @@ guts: global-utilities@e0000 { ...@@ -296,9 +397,21 @@ guts: global-utilities@e0000 {
fsl,liodn-bits = <12>; fsl,liodn-bits = <12>;
}; };
/include/ "qoriq-clockgen2.dtsi"
clockgen: global-utilities@e1000 { clockgen: global-utilities@e1000 {
compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0"; compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0";
reg = <0xe1000 0x1000>; reg = <0xe1000 0x1000>;
mux0: mux0@0 {
#clock-cells = <0>;
reg = <0x0 0x4>;
compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
<&pll1 0>, <&pll1 1>, <&pll1 2>;
clock-names = "pll0", "pll0-div2", "pll0-div4",
"pll1", "pll1-div2", "pll1-div4";
clock-output-names = "cmux0";
};
}; };
rcpm: global-utilities@e2000 { rcpm: global-utilities@e2000 {
...@@ -343,6 +456,11 @@ sdhc@114000 { ...@@ -343,6 +456,11 @@ sdhc@114000 {
/include/ "qoriq-duart-1.dtsi" /include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-sec5.3-0.dtsi" /include/ "qoriq-sec5.3-0.dtsi"
/include/ "qoriq-qman3.dtsi"
qman: qman@318000 {
interrupts = <16 2 1 28>;
};
/include/ "qoriq-bman1.dtsi" /include/ "qoriq-bman1.dtsi"
bman: bman@31a000 { bman: bman@31a000 {
interrupts = <16 2 1 29>; interrupts = <16 2 1 29>;
......
arch/powerpc/boot/dts/fsl/p1023si-post.dtsi
View file @ 08d183e3
...@@ -37,6 +37,16 @@ &bman_fbpr { ...@@ -37,6 +37,16 @@ &bman_fbpr {
alloc-ranges = <0 0 0x10 0>; alloc-ranges = <0 0 0x10 0>;
}; };
&qman_fqd {
compatible = "fsl,qman-fqd";
alloc-ranges = <0 0 0x10 0>;
};
&qman_pfdr {
compatible = "fsl,qman-pfdr";
alloc-ranges = <0 0 0x10 0>;
};
&lbc { &lbc {
#address-cells = <2>; #address-cells = <2>;
#size-cells = <1>; #size-cells = <1>;
...@@ -102,6 +112,31 @@ pcie@0 { ...@@ -102,6 +112,31 @@ pcie@0 {
}; };
}; };
&qportals {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
qportal0: qman-portal@0 {
compatible = "fsl,qman-portal";
reg = <0x0 0x4000>, <0x100000 0x1000>;
interrupts = <29 2 0 0>;
cell-index = <0>;
};
qportal1: qman-portal@4000 {
compatible = "fsl,qman-portal";
reg = <0x4000 0x4000>, <0x101000 0x1000>;
interrupts = <31 2 0 0>;
cell-index = <1>;
};
qportal2: qman-portal@8000 {
compatible = "fsl,qman-portal";
reg = <0x8000 0x4000>, <0x102000 0x1000>;
interrupts = <33 2 0 0>;
cell-index = <2>;
};
};
&bportals { &bportals {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
...@@ -248,6 +283,14 @@ rtic_d: rtic-d@60 { ...@@ -248,6 +283,14 @@ rtic_d: rtic-d@60 {
/include/ "pq3-mpic.dtsi" /include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi" /include/ "pq3-mpic-timer-B.dtsi"
qman: qman@88000 {
compatible = "fsl,qman";
reg = <0x88000 0x1000>;
interrupts = <16 2 0 0>;
fsl,qman-portals = <&qportals>;
memory-region = <&qman_fqd &qman_pfdr>;
};
bman: bman@8a000 { bman: bman@8a000 {
compatible = "fsl,bman"; compatible = "fsl,bman";
reg = <0x8a000 0x1000>; reg = <0x8a000 0x1000>;
......
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
View file @ 08d183e3
...@@ -37,6 +37,16 @@ &bman_fbpr { ...@@ -37,6 +37,16 @@ &bman_fbpr {
alloc-ranges = <0 0 0x10 0>; alloc-ranges = <0 0 0x10 0>;
}; };
&qman_fqd {
compatible = "fsl,qman-fqd";
alloc-ranges = <0 0 0x10 0>;
};
&qman_pfdr {
compatible = "fsl,qman-pfdr";
alloc-ranges = <0 0 0x10 0>;
};
&lbc { &lbc {
compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus"; compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>; interrupts = <25 2 0 0>;
...@@ -223,6 +233,8 @@ dcsr-cpu-sb-proxy@43000 { ...@@ -223,6 +233,8 @@ dcsr-cpu-sb-proxy@43000 {
/include/ "qoriq-bman1-portals.dtsi" /include/ "qoriq-bman1-portals.dtsi"
/include/ "qoriq-qman1-portals.dtsi"
&soc { &soc {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
...@@ -416,5 +428,6 @@ crypto: crypto@300000 { ...@@ -416,5 +428,6 @@ crypto: crypto@300000 {
fsl,iommu-parent = <&pamu1>; fsl,iommu-parent = <&pamu1>;
}; };
/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi" /include/ "qoriq-bman1.dtsi"
}; };
arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
View file @ 08d183e3
...@@ -37,6 +37,16 @@ &bman_fbpr { ...@@ -37,6 +37,16 @@ &bman_fbpr {
alloc-ranges = <0 0 0x10 0>; alloc-ranges = <0 0 0x10 0>;
}; };
&qman_fqd {
compatible = "fsl,qman-fqd";
alloc-ranges = <0 0 0x10 0>;
};
&qman_pfdr {
compatible = "fsl,qman-pfdr";
alloc-ranges = <0 0 0x10 0>;
};
&lbc { &lbc {
compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus"; compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>; interrupts = <25 2 0 0>;
...@@ -250,6 +260,8 @@ dcsr-cpu-sb-proxy@43000 { ...@@ -250,6 +260,8 @@ dcsr-cpu-sb-proxy@43000 {
/include/ "qoriq-bman1-portals.dtsi" /include/ "qoriq-bman1-portals.dtsi"
/include/ "qoriq-qman1-portals.dtsi"
&soc { &soc {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
...@@ -443,5 +455,6 @@ crypto: crypto@300000 { ...@@ -443,5 +455,6 @@ crypto: crypto@300000 {
fsl,iommu-parent = <&pamu1>; fsl,iommu-parent = <&pamu1>;
}; };
/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi" /include/ "qoriq-bman1.dtsi"
}; };
arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
View file @ 08d183e3
...@@ -37,6 +37,16 @@ &bman_fbpr { ...@@ -37,6 +37,16 @@ &bman_fbpr {
alloc-ranges = <0 0 0x10 0>; alloc-ranges = <0 0 0x10 0>;
}; };
&qman_fqd {
compatible = "fsl,qman-fqd";
alloc-ranges = <0 0 0x10 0>;
};
&qman_pfdr {
compatible = "fsl,qman-pfdr";
alloc-ranges = <0 0 0x10 0>;
};
&lbc { &lbc {
compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus"; compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>; interrupts = <25 2 0 0>;
...@@ -250,6 +260,8 @@ dcsr-cpu-sb-proxy@47000 { ...@@ -250,6 +260,8 @@ dcsr-cpu-sb-proxy@47000 {
/include/ "qoriq-bman1-portals.dtsi" /include/ "qoriq-bman1-portals.dtsi"
/include/ "qoriq-qman1-portals.dtsi"
&soc { &soc {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
...@@ -499,5 +511,6 @@ crypto: crypto@300000 { ...@@ -499,5 +511,6 @@ crypto: crypto@300000 {
fsl,iommu-parent = <&pamu1>; fsl,iommu-parent = <&pamu1>;
}; };
/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi" /include/ "qoriq-bman1.dtsi"
}; };
arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
View file @ 08d183e3
...@@ -37,6 +37,16 @@ &bman_fbpr { ...@@ -37,6 +37,16 @@ &bman_fbpr {
alloc-ranges = <0 0 0x10000 0>; alloc-ranges = <0 0 0x10000 0>;
}; };
&qman_fqd {
compatible = "fsl,qman-fqd";
alloc-ranges = <0 0 0x10000 0>;
};
&qman_pfdr {
compatible = "fsl,qman-pfdr";
alloc-ranges = <0 0 0x10000 0>;
};
&lbc { &lbc {
compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus"; compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>; interrupts = <25 2 0 0>;
...@@ -247,6 +257,8 @@ dcsr-cpu-sb-proxy@41000 { ...@@ -247,6 +257,8 @@ dcsr-cpu-sb-proxy@41000 {
/include/ "qoriq-bman1-portals.dtsi" /include/ "qoriq-bman1-portals.dtsi"
/include/ "qoriq-qman1-portals.dtsi"
&soc { &soc {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
...@@ -429,6 +441,7 @@ crypto@300000 { ...@@ -429,6 +441,7 @@ crypto@300000 {
fsl,iommu-parent = <&pamu1>; fsl,iommu-parent = <&pamu1>;
}; };
/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi" /include/ "qoriq-bman1.dtsi"
/include/ "qoriq-raid1.0-0.dtsi" /include/ "qoriq-raid1.0-0.dtsi"
......
arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
View file @ 08d183e3
...@@ -37,6 +37,16 @@ &bman_fbpr { ...@@ -37,6 +37,16 @@ &bman_fbpr {
alloc-ranges = <0 0 0x10000 0>; alloc-ranges = <0 0 0x10000 0>;
}; };
&qman_fqd {
compatible = "fsl,qman-fqd";
alloc-ranges = <0 0 0x10000 0>;
};
&qman_pfdr {
compatible = "fsl,qman-pfdr";
alloc-ranges = <0 0 0x10000 0>;
};
&lbc { &lbc {
compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus"; compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>; interrupts = <25 2 0 0>;
...@@ -202,6 +212,8 @@ dcsr-cpu-sb-proxy@43000 { ...@@ -202,6 +212,8 @@ dcsr-cpu-sb-proxy@43000 {
/include/ "qoriq-bman1-portals.dtsi" /include/ "qoriq-bman1-portals.dtsi"
/include/ "qoriq-qman1-portals.dtsi"
&soc { &soc {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
...@@ -408,5 +420,6 @@ crypto@300000 { ...@@ -408,5 +420,6 @@ crypto@300000 {
fsl,iommu-parent = <&pamu4>; fsl,iommu-parent = <&pamu4>;
}; };
/include/ "qoriq-qman1.dtsi"
/include/ "qoriq-bman1.dtsi" /include/ "qoriq-bman1.dtsi"
}; };
arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi
View file @ 08d183e3
...@@ -41,61 +41,61 @@ qportal0: qman-portal@0 { ...@@ -41,61 +41,61 @@ qportal0: qman-portal@0 {
compatible = "fsl,qman-portal"; compatible = "fsl,qman-portal";
reg = <0x0 0x4000>, <0x100000 0x1000>; reg = <0x0 0x4000>, <0x100000 0x1000>;
interrupts = <104 2 0 0>; interrupts = <104 2 0 0>;
fsl,qman-channel-id = <0x0>; cell-index = <0x0>;
}; };
qportal1: qman-portal@4000 { qportal1: qman-portal@4000 {
compatible = "fsl,qman-portal"; compatible = "fsl,qman-portal";
reg = <0x4000 0x4000>, <0x101000 0x1000>; reg = <0x4000 0x4000>, <0x101000 0x1000>;
interrupts = <106 2 0 0>; interrupts = <106 2 0 0>;
fsl,qman-channel-id = <1>; cell-index = <1>;
}; };
qportal2: qman-portal@8000 { qportal2: qman-portal@8000 {
compatible = "fsl,qman-portal"; compatible = "fsl,qman-portal";
reg = <0x8000 0x4000>, <0x102000 0x1000>; reg = <0x8000 0x4000>, <0x102000 0x1000>;
interrupts = <108 2 0 0>; interrupts = <108 2 0 0>;
fsl,qman-channel-id = <2>; cell-index = <2>;
}; };
qportal3: qman-portal@c000 { qportal3: qman-portal@c000 {
compatible = "fsl,qman-portal"; compatible = "fsl,qman-portal";
reg = <0xc000 0x4000>, <0x103000 0x1000>; reg = <0xc000 0x4000>, <0x103000 0x1000>;
interrupts = <110 2 0 0>; interrupts = <110 2 0 0>;
fsl,qman-channel-id = <3>; cell-index = <3>;
}; };
qportal4: qman-portal@10000 { qportal4: qman-portal@10000 {
compatible = "fsl,qman-portal"; compatible = "fsl,qman-portal";
reg = <0x10000 0x4000>, <0x104000 0x1000>; reg = <0x10000 0x4000>, <0x104000 0x1000>;
interrupts = <112 2 0 0>; interrupts = <112 2 0 0>;
fsl,qman-channel-id = <4>; cell-index = <4>;
}; };
qportal5: qman-portal@14000 { qportal5: qman-portal@14000 {
compatible = "fsl,qman-portal"; compatible = "fsl,qman-portal";
reg = <0x14000 0x4000>, <0x105000 0x1000>; reg = <0x14000 0x4000>, <0x105000 0x1000>;
interrupts = <114 2 0 0>; interrupts = <114 2 0 0>;
fsl,qman-channel-id = <5>; cell-index = <5>;
}; };
qportal6: qman-portal@18000 { qportal6: qman-portal@18000 {
compatible = "fsl,qman-portal"; compatible = "fsl,qman-portal";
reg = <0x18000 0x4000>, <0x106000 0x1000>; reg = <0x18000 0x4000>, <0x106000 0x1000>;
interrupts = <116 2 0 0>; interrupts = <116 2 0 0>;
fsl,qman-channel-id = <6>; cell-index = <6>;
}; };
qportal7: qman-portal@1c000 { qportal7: qman-portal@1c000 {
compatible = "fsl,qman-portal"; compatible = "fsl,qman-portal";
reg = <0x1c000 0x4000>, <0x107000 0x1000>; reg = <0x1c000 0x4000>, <0x107000 0x1000>;
interrupts = <118 2 0 0>; interrupts = <118 2 0 0>;
fsl,qman-channel-id = <7>; cell-index = <7>;
}; };
qportal8: qman-portal@20000 { qportal8: qman-portal@20000 {
compatible = "fsl,qman-portal"; compatible = "fsl,qman-portal";
reg = <0x20000 0x4000>, <0x108000 0x1000>; reg = <0x20000 0x4000>, <0x108000 0x1000>;
interrupts = <120 2 0 0>; interrupts = <120 2 0 0>;
fsl,qman-channel-id = <8>; cell-index = <8>;
}; };
qportal9: qman-portal@24000 { qportal9: qman-portal@24000 {
compatible = "fsl,qman-portal"; compatible = "fsl,qman-portal";
reg = <0x24000 0x4000>, <0x109000 0x1000>; reg = <0x24000 0x4000>, <0x109000 0x1000>;
interrupts = <122 2 0 0>; interrupts = <122 2 0 0>;
fsl,qman-channel-id = <9>; cell-index = <9>;
}; };
}; };
arch/powerpc/boot/dts/fsl/t1023si-post.dtsi 0 → 100644
View file @ 08d183e3
/*
* T1023 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&ifc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,ifc", "simple-bus";
interrupts = <25 2 0 0>;
};
&pci0 {
compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
interrupts = <20 2 0 0>;
fsl,iommu-parent = <&pamu0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <20 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 40 1 0 0
0000 0 0 2 &mpic 1 1 0 0
0000 0 0 3 &mpic 2 1 0 0
0000 0 0 4 &mpic 3 1 0 0
>;
};
};
&pci1 {
compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 0xff>;
interrupts = <21 2 0 0>;
fsl,iommu-parent = <&pamu0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <21 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 41 1 0 0
0000 0 0 2 &mpic 5 1 0 0
0000 0 0 3 &mpic 6 1 0 0
0000 0 0 4 &mpic 7 1 0 0
>;
};
};
&pci2 {
compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
interrupts = <22 2 0 0>;
fsl,iommu-parent = <&pamu0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <22 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 42 1 0 0
0000 0 0 2 &mpic 9 1 0 0
0000 0 0 3 &mpic 10 1 0 0
0000 0 0 4 &mpic 11 1 0 0
>;
};
};
&dcsr {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,dcsr", "simple-bus";
dcsr-epu@0 {
compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu";
interrupts = <52 2 0 0
84 2 0 0
85 2 0 0>;
reg = <0x0 0x1000>;
};
dcsr-npc {
compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc";
reg = <0x1000 0x1000 0x1002000 0x10000>;
};
dcsr-nxc@2000 {
compatible = "fsl,dcsr-nxc";
reg = <0x2000 0x1000>;
};
dcsr-corenet {
compatible = "fsl,dcsr-corenet";
reg = <0x8000 0x1000 0x1A000 0x1000>;
};
dcsr-ocn@11000 {
compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn";
reg = <0x11000 0x1000>;
};
dcsr-ddr@12000 {
compatible = "fsl,dcsr-ddr";
dev-handle = <&ddr1>;
reg = <0x12000 0x1000>;
};
dcsr-nal@18000 {
compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal";
reg = <0x18000 0x1000>;
};
dcsr-rcpm@22000 {
compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm";
reg = <0x22000 0x1000>;
};
dcsr-snpc@30000 {
compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
reg = <0x30000 0x1000 0x1022000 0x10000>;
};
dcsr-snpc@31000 {
compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
reg = <0x31000 0x1000 0x1042000 0x10000>;
};
dcsr-cpu-sb-proxy@100000 {
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu0>;
reg = <0x100000 0x1000 0x101000 0x1000>;
};
dcsr-cpu-sb-proxy@108000 {
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu1>;
reg = <0x108000 0x1000 0x109000 0x1000>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
soc-sram-error {
compatible = "fsl,soc-sram-error";
interrupts = <16 2 1 29>;
};
corenet-law@0 {
compatible = "fsl,corenet-law";
reg = <0x0 0x1000>;
fsl,num-laws = <16>;
};
ddr1: memory-controller@8000 {
compatible = "fsl,qoriq-memory-controller-v5.0",
"fsl,qoriq-memory-controller";
reg = <0x8000 0x1000>;
interrupts = <16 2 1 23>;
};
cpc: l3-cache-controller@10000 {
compatible = "fsl,t1023-l3-cache-controller", "cache";
reg = <0x10000 0x1000>;
interrupts = <16 2 1 27>;
};
corenet-cf@18000 {
compatible = "fsl,corenet2-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
};
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x1000>;
ranges = <0 0x20000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
interrupts = <
24 2 0 0
16 2 1 30>;
pamu0: pamu@0 {
reg = <0 0x1000>;
fsl,primary-cache-geometry = <128 1>;
fsl,secondary-cache-geometry = <32 2>;
};
};
/include/ "qoriq-mpic.dtsi"
guts: global-utilities@e0000 {
compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0";
reg = <0xe0000 0xe00>;
fsl,has-rstcr;
fsl,liodn-bits = <12>;
};
/include/ "qoriq-clockgen2.dtsi"
global-utilities@e1000 {
compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
mux0: mux0@0 {
#clock-cells = <0>;
reg = <0x0 4>;
compatible = "fsl,core-mux-clock";
clocks = <&pll0 0>, <&pll0 1>;
clock-names = "pll0_0", "pll0_1";
clock-output-names = "cmux0";
};
mux1: mux1@20 {
#clock-cells = <0>;
reg = <0x20 4>;
compatible = "fsl,core-mux-clock";
clocks = <&pll0 0>, <&pll0 1>;
clock-names = "pll0_0", "pll0_1";
clock-output-names = "cmux1";
};
};
rcpm: global-utilities@e2000 {
compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.0";
reg = <0xe2000 0x1000>;
};
sfp: sfp@e8000 {
compatible = "fsl,t1023-sfp";
reg = <0xe8000 0x1000>;
};
serdes: serdes@ea000 {
compatible = "fsl,t1023-serdes";
reg = <0xea000 0x4000>;
};
scfg: global-utilities@fc000 {
compatible = "fsl,t1023-scfg";
reg = <0xfc000 0x1000>;
};
/include/ "elo3-dma-0.dtsi"
/include/ "elo3-dma-1.dtsi"
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
compatible = "fsl,t1023-esdhc", "fsl,esdhc";
fsl,iommu-parent = <&pamu0>;
fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
sdhci,auto-cmd12;
no-1-8-v;
};
/include/ "qoriq-i2c-0.dtsi"
/include/ "qoriq-i2c-1.dtsi"
/include/ "qoriq-duart-0.dtsi"
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-gpio-1.dtsi"
/include/ "qoriq-gpio-2.dtsi"
/include/ "qoriq-gpio-3.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
fsl,iommu-parent = <&pamu0>;
fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
phy_type = "utmi";
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
fsl,iommu-parent = <&pamu0>;
fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
dr_mode = "host";
phy_type = "utmi";
};
/include/ "qoriq-sata2-0.dtsi"
sata@220000 {
fsl,iommu-parent = <&pamu0>;
fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
};
/include/ "qoriq-sec5.0-0.dtsi"
};
arch/powerpc/boot/dts/fsl/t1024si-post.dtsi 0 → 100644
View file @ 08d183e3
/*
* T1024 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "t1023si-post.dtsi"
/ {
aliases {
vga = &display;
display = &display;
};
qe:qe@ffe140000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
compatible = "fsl,qe";
ranges = <0x0 0xf 0xfe140000 0x40000>;
reg = <0xf 0xfe140000 0 0x480>;
fsl,qe-num-riscs = <1>;
fsl,qe-num-snums = <28>;
brg-frequency = <0>;
bus-frequency = <0>;
};
};
&soc {
display:display@180000 {
compatible = "fsl,t1024-diu", "fsl,diu";
reg = <0x180000 1000>;
interrupts = <74 2 0 0>;
};
};
&qe {
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78
};
ucc@2000 {
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
};
ucc@2200 {
cell-index = <3>;
reg = <0x2200 0x200>;
interrupts = <34>;
interrupt-parent = <&qeic>;
};
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x10000 0x6000>;
data-only@0 {
compatible = "fsl,qe-muram-data", "fsl,cpm-muram-data";
reg = <0x0 0x6000>;
};
};
};
arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi 0 → 100644
View file @ 08d183e3
/*
* T1024/T1023 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/include/ "e5500_power_isa.dtsi"
/ {
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
ccsr = &soc;
dcsr = &dcsr;
dma0 = &dma0;
dma1 = &dma1;
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
usb0 = &usb0;
usb1 = &usb1;
sdhc = &sdhc;
crypto = &crypto;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
clocks = <&mux0>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
clocks = <&mux1>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
};
};
};
};
arch/powerpc/boot/dts/fsl/t1040si-post.dtsi
View file @ 08d183e3
...@@ -37,6 +37,16 @@ &bman_fbpr { ...@@ -37,6 +37,16 @@ &bman_fbpr {
alloc-ranges = <0 0 0x10000 0>; alloc-ranges = <0 0 0x10000 0>;
}; };
&qman_fqd {
compatible = "fsl,qman-fqd";
alloc-ranges = <0 0 0x10000 0>;
};
&qman_pfdr {
compatible = "fsl,qman-pfdr";
alloc-ranges = <0 0 0x10000 0>;
};
&ifc { &ifc {
#address-cells = <2>; #address-cells = <2>;
#size-cells = <1>; #size-cells = <1>;
...@@ -280,6 +290,73 @@ bman-portal@24000 { ...@@ -280,6 +290,73 @@ bman-portal@24000 {
}; };
}; };
&qportals {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "simple-bus";
qportal0: qman-portal@0 {
compatible = "fsl,qman-portal";
reg = <0x0 0x4000>, <0x1000000 0x1000>;
interrupts = <104 0x2 0 0>;
cell-index = <0x0>;
};
qportal1: qman-portal@4000 {
compatible = "fsl,qman-portal";
reg = <0x4000 0x4000>, <0x1001000 0x1000>;
interrupts = <106 0x2 0 0>;
cell-index = <0x1>;
};
qportal2: qman-portal@8000 {
compatible = "fsl,qman-portal";
reg = <0x8000 0x4000>, <0x1002000 0x1000>;
interrupts = <108 0x2 0 0>;
cell-index = <0x2>;
};
qportal3: qman-portal@c000 {
compatible = "fsl,qman-portal";
reg = <0xc000 0x4000>, <0x1003000 0x1000>;
interrupts = <110 0x2 0 0>;
cell-index = <0x3>;
};
qportal4: qman-portal@10000 {
compatible = "fsl,qman-portal";
reg = <0x10000 0x4000>, <0x1004000 0x1000>;
interrupts = <112 0x2 0 0>;
cell-index = <0x4>;
};
qportal5: qman-portal@14000 {
compatible = "fsl,qman-portal";
reg = <0x14000 0x4000>, <0x1005000 0x1000>;
interrupts = <114 0x2 0 0>;
cell-index = <0x5>;
};
qportal6: qman-portal@18000 {
compatible = "fsl,qman-portal";
reg = <0x18000 0x4000>, <0x1006000 0x1000>;
interrupts = <116 0x2 0 0>;
cell-index = <0x6>;
};
qportal7: qman-portal@1c000 {
compatible = "fsl,qman-portal";
reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
interrupts = <118 0x2 0 0>;
cell-index = <0x7>;
};
qportal8: qman-portal@20000 {
compatible = "fsl,qman-portal";
reg = <0x20000 0x4000>, <0x1008000 0x1000>;
interrupts = <120 0x2 0 0>;
cell-index = <0x8>;
};
qportal9: qman-portal@24000 {
compatible = "fsl,qman-portal";
reg = <0x24000 0x4000>, <0x1009000 0x1000>;
interrupts = <122 0x2 0 0>;
cell-index = <0x9>;
};
};
&soc { &soc {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
...@@ -463,5 +540,6 @@ sata@221000 { ...@@ -463,5 +540,6 @@ sata@221000 {
fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */
}; };
/include/ "qoriq-sec5.0-0.dtsi" /include/ "qoriq-sec5.0-0.dtsi"
/include/ "qoriq-qman3.dtsi"
/include/ "qoriq-bman1.dtsi" /include/ "qoriq-bman1.dtsi"
}; };
arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
View file @ 08d183e3
...@@ -37,6 +37,16 @@ &bman_fbpr { ...@@ -37,6 +37,16 @@ &bman_fbpr {
alloc-ranges = <0 0 0x10000 0>; alloc-ranges = <0 0 0x10000 0>;
}; };
&qman_fqd {
compatible = "fsl,qman-fqd";
alloc-ranges = <0 0 0x10000 0>;
};
&qman_pfdr {
compatible = "fsl,qman-pfdr";
alloc-ranges = <0 0 0x10000 0>;
};
&ifc { &ifc {
#address-cells = <2>; #address-cells = <2>;
#size-cells = <1>; #size-cells = <1>;
...@@ -326,6 +336,121 @@ bman-portal@44000 { ...@@ -326,6 +336,121 @@ bman-portal@44000 {
}; };
}; };
&qportals {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "simple-bus";
qportal0: qman-portal@0 {
compatible = "fsl,qman-portal";
reg = <0x0 0x4000>, <0x1000000 0x1000>;
interrupts = <104 0x2 0 0>;
cell-index = <0x0>;
};
qportal1: qman-portal@4000 {
compatible = "fsl,qman-portal";
reg = <0x4000 0x4000>, <0x1001000 0x1000>;
interrupts = <106 0x2 0 0>;
cell-index = <0x1>;
};
qportal2: qman-portal@8000 {
compatible = "fsl,qman-portal";
reg = <0x8000 0x4000>, <0x1002000 0x1000>;
interrupts = <108 0x2 0 0>;
cell-index = <0x2>;
};
qportal3: qman-portal@c000 {
compatible = "fsl,qman-portal";
reg = <0xc000 0x4000>, <0x1003000 0x1000>;
interrupts = <110 0x2 0 0>;
cell-index = <0x3>;
};
qportal4: qman-portal@10000 {
compatible = "fsl,qman-portal";
reg = <0x10000 0x4000>, <0x1004000 0x1000>;
interrupts = <112 0x2 0 0>;
cell-index = <0x4>;
};
qportal5: qman-portal@14000 {
compatible = "fsl,qman-portal";
reg = <0x14000 0x4000>, <0x1005000 0x1000>;
interrupts = <114 0x2 0 0>;
cell-index = <0x5>;
};
qportal6: qman-portal@18000 {
compatible = "fsl,qman-portal";
reg = <0x18000 0x4000>, <0x1006000 0x1000>;
interrupts = <116 0x2 0 0>;
cell-index = <0x6>;
};
qportal7: qman-portal@1c000 {
compatible = "fsl,qman-portal";
reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
interrupts = <118 0x2 0 0>;
cell-index = <0x7>;
};
qportal8: qman-portal@20000 {
compatible = "fsl,qman-portal";
reg = <0x20000 0x4000>, <0x1008000 0x1000>;
interrupts = <120 0x2 0 0>;
cell-index = <0x8>;
};
qportal9: qman-portal@24000 {
compatible = "fsl,qman-portal";
reg = <0x24000 0x4000>, <0x1009000 0x1000>;
interrupts = <122 0x2 0 0>;
cell-index = <0x9>;
};
qportal10: qman-portal@28000 {
compatible = "fsl,qman-portal";
reg = <0x28000 0x4000>, <0x100a000 0x1000>;
interrupts = <124 0x2 0 0>;
cell-index = <0xa>;
};
qportal11: qman-portal@2c000 {
compatible = "fsl,qman-portal";
reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
interrupts = <126 0x2 0 0>;
cell-index = <0xb>;
};
qportal12: qman-portal@30000 {
compatible = "fsl,qman-portal";
reg = <0x30000 0x4000>, <0x100c000 0x1000>;
interrupts = <128 0x2 0 0>;
cell-index = <0xc>;
};
qportal13: qman-portal@34000 {
compatible = "fsl,qman-portal";
reg = <0x34000 0x4000>, <0x100d000 0x1000>;
interrupts = <130 0x2 0 0>;
cell-index = <0xd>;
};
qportal14: qman-portal@38000 {
compatible = "fsl,qman-portal";
reg = <0x38000 0x4000>, <0x100e000 0x1000>;
interrupts = <132 0x2 0 0>;
cell-index = <0xe>;
};
qportal15: qman-portal@3c000 {
compatible = "fsl,qman-portal";
reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
interrupts = <134 0x2 0 0>;
cell-index = <0xf>;
};
qportal16: qman-portal@40000 {
compatible = "fsl,qman-portal";
reg = <0x40000 0x4000>, <0x1010000 0x1000>;
interrupts = <136 0x2 0 0>;
cell-index = <0x10>;
};
qportal17: qman-portal@44000 {
compatible = "fsl,qman-portal";
reg = <0x44000 0x4000>, <0x1011000 0x1000>;
interrupts = <138 0x2 0 0>;
cell-index = <0x11>;
};
};
&soc { &soc {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
...@@ -417,7 +542,7 @@ mux0: mux0@0 { ...@@ -417,7 +542,7 @@ mux0: mux0@0 {
compatible = "fsl,qoriq-core-mux-2.0"; compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
<&pll1 0>, <&pll1 1>, <&pll1 2>; <&pll1 0>, <&pll1 1>, <&pll1 2>;
clock-names = "pll0", "pll0-div2", "pll1-div4", clock-names = "pll0", "pll0-div2", "pll0-div4",
"pll1", "pll1-div2", "pll1-div4"; "pll1", "pll1-div2", "pll1-div4";
clock-output-names = "cmux0"; clock-output-names = "cmux0";
}; };
...@@ -428,7 +553,7 @@ mux1: mux1@20 { ...@@ -428,7 +553,7 @@ mux1: mux1@20 {
compatible = "fsl,qoriq-core-mux-2.0"; compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
<&pll1 0>, <&pll1 1>, <&pll1 2>; <&pll1 0>, <&pll1 1>, <&pll1 2>;
clock-names = "pll0", "pll0-div2", "pll1-div4", clock-names = "pll0", "pll0-div2", "pll0-div4",
"pll1", "pll1-div2", "pll1-div4"; "pll1", "pll1-div2", "pll1-div4";
clock-output-names = "cmux1"; clock-output-names = "cmux1";
}; };
...@@ -502,6 +627,7 @@ usb1: usb@211000 { ...@@ -502,6 +627,7 @@ usb1: usb@211000 {
phy_type = "utmi"; phy_type = "utmi";
}; };
/include/ "qoriq-sec5.2-0.dtsi" /include/ "qoriq-sec5.2-0.dtsi"
/include/ "qoriq-qman3.dtsi"
/include/ "qoriq-bman1.dtsi" /include/ "qoriq-bman1.dtsi"
L2_1: l2-cache-controller@c20000 { L2_1: l2-cache-controller@c20000 {
......
arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
View file @ 08d183e3
...@@ -37,6 +37,16 @@ &bman_fbpr { ...@@ -37,6 +37,16 @@ &bman_fbpr {
alloc-ranges = <0 0 0x10000 0>; alloc-ranges = <0 0 0x10000 0>;
}; };
&qman_fqd {
compatible = "fsl,qman-fqd";
alloc-ranges = <0 0 0x10000 0>;
};
&qman_pfdr {
compatible = "fsl,qman-pfdr";
alloc-ranges = <0 0 0x10000 0>;
};
&ifc { &ifc {
#address-cells = <2>; #address-cells = <2>;
#size-cells = <1>; #size-cells = <1>;
...@@ -556,6 +566,313 @@ bman-portal@c4000 { ...@@ -556,6 +566,313 @@ bman-portal@c4000 {
}; };
}; };
&qportals {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "simple-bus";
qportal0: qman-portal@0 {
compatible = "fsl,qman-portal";
reg = <0x0 0x4000>, <0x1000000 0x1000>;
interrupts = <104 0x2 0 0>;
cell-index = <0x0>;
};
qportal1: qman-portal@4000 {
compatible = "fsl,qman-portal";
reg = <0x4000 0x4000>, <0x1001000 0x1000>;
interrupts = <106 0x2 0 0>;
cell-index = <0x1>;
};
qportal2: qman-portal@8000 {
compatible = "fsl,qman-portal";
reg = <0x8000 0x4000>, <0x1002000 0x1000>;
interrupts = <108 0x2 0 0>;
cell-index = <0x2>;
};
qportal3: qman-portal@c000 {
compatible = "fsl,qman-portal";
reg = <0xc000 0x4000>, <0x1003000 0x1000>;
interrupts = <110 0x2 0 0>;
cell-index = <0x3>;
};
qportal4: qman-portal@10000 {
compatible = "fsl,qman-portal";
reg = <0x10000 0x4000>, <0x1004000 0x1000>;
interrupts = <112 0x2 0 0>;
cell-index = <0x4>;
};
qportal5: qman-portal@14000 {
compatible = "fsl,qman-portal";
reg = <0x14000 0x4000>, <0x1005000 0x1000>;
interrupts = <114 0x2 0 0>;
cell-index = <0x5>;
};
qportal6: qman-portal@18000 {
compatible = "fsl,qman-portal";
reg = <0x18000 0x4000>, <0x1006000 0x1000>;
interrupts = <116 0x2 0 0>;
cell-index = <0x6>;
};
qportal7: qman-portal@1c000 {
compatible = "fsl,qman-portal";
reg = <0x1c000 0x4000>, <0x1007000 0x1000>;
interrupts = <118 0x2 0 0>;
cell-index = <0x7>;
};
qportal8: qman-portal@20000 {
compatible = "fsl,qman-portal";
reg = <0x20000 0x4000>, <0x1008000 0x1000>;
interrupts = <120 0x2 0 0>;
cell-index = <0x8>;
};
qportal9: qman-portal@24000 {
compatible = "fsl,qman-portal";
reg = <0x24000 0x4000>, <0x1009000 0x1000>;
interrupts = <122 0x2 0 0>;
cell-index = <0x9>;
};
qportal10: qman-portal@28000 {
compatible = "fsl,qman-portal";
reg = <0x28000 0x4000>, <0x100a000 0x1000>;
interrupts = <124 0x2 0 0>;
cell-index = <0xa>;
};
qportal11: qman-portal@2c000 {
compatible = "fsl,qman-portal";
reg = <0x2c000 0x4000>, <0x100b000 0x1000>;
interrupts = <126 0x2 0 0>;
cell-index = <0xb>;
};
qportal12: qman-portal@30000 {
compatible = "fsl,qman-portal";
reg = <0x30000 0x4000>, <0x100c000 0x1000>;
interrupts = <128 0x2 0 0>;
cell-index = <0xc>;
};
qportal13: qman-portal@34000 {
compatible = "fsl,qman-portal";
reg = <0x34000 0x4000>, <0x100d000 0x1000>;
interrupts = <130 0x2 0 0>;
cell-index = <0xd>;
};
qportal14: qman-portal@38000 {
compatible = "fsl,qman-portal";
reg = <0x38000 0x4000>, <0x100e000 0x1000>;
interrupts = <132 0x2 0 0>;
cell-index = <0xe>;
};
qportal15: qman-portal@3c000 {
compatible = "fsl,qman-portal";
reg = <0x3c000 0x4000>, <0x100f000 0x1000>;
interrupts = <134 0x2 0 0>;
cell-index = <0xf>;
};
qportal16: qman-portal@40000 {
compatible = "fsl,qman-portal";
reg = <0x40000 0x4000>, <0x1010000 0x1000>;
interrupts = <136 0x2 0 0>;
cell-index = <0x10>;
};
qportal17: qman-portal@44000 {
compatible = "fsl,qman-portal";
reg = <0x44000 0x4000>, <0x1011000 0x1000>;
interrupts = <138 0x2 0 0>;
cell-index = <0x11>;
};
qportal18: qman-portal@48000 {
compatible = "fsl,qman-portal";
reg = <0x48000 0x4000>, <0x1012000 0x1000>;
interrupts = <140 0x2 0 0>;
cell-index = <0x12>;
};
qportal19: qman-portal@4c000 {
compatible = "fsl,qman-portal";
reg = <0x4c000 0x4000>, <0x1013000 0x1000>;
interrupts = <142 0x2 0 0>;
cell-index = <0x13>;
};
qportal20: qman-portal@50000 {
compatible = "fsl,qman-portal";
reg = <0x50000 0x4000>, <0x1014000 0x1000>;
interrupts = <144 0x2 0 0>;
cell-index = <0x14>;
};
qportal21: qman-portal@54000 {
compatible = "fsl,qman-portal";
reg = <0x54000 0x4000>, <0x1015000 0x1000>;
interrupts = <146 0x2 0 0>;
cell-index = <0x15>;
};
qportal22: qman-portal@58000 {
compatible = "fsl,qman-portal";
reg = <0x58000 0x4000>, <0x1016000 0x1000>;
interrupts = <148 0x2 0 0>;
cell-index = <0x16>;
};
qportal23: qman-portal@5c000 {
compatible = "fsl,qman-portal";
reg = <0x5c000 0x4000>, <0x1017000 0x1000>;
interrupts = <150 0x2 0 0>;
cell-index = <0x17>;
};
qportal24: qman-portal@60000 {
compatible = "fsl,qman-portal";
reg = <0x60000 0x4000>, <0x1018000 0x1000>;
interrupts = <152 0x2 0 0>;
cell-index = <0x18>;
};
qportal25: qman-portal@64000 {
compatible = "fsl,qman-portal";
reg = <0x64000 0x4000>, <0x1019000 0x1000>;
interrupts = <154 0x2 0 0>;
cell-index = <0x19>;
};
qportal26: qman-portal@68000 {
compatible = "fsl,qman-portal";
reg = <0x68000 0x4000>, <0x101a000 0x1000>;
interrupts = <156 0x2 0 0>;
cell-index = <0x1a>;
};
qportal27: qman-portal@6c000 {
compatible = "fsl,qman-portal";
reg = <0x6c000 0x4000>, <0x101b000 0x1000>;
interrupts = <158 0x2 0 0>;
cell-index = <0x1b>;
};
qportal28: qman-portal@70000 {
compatible = "fsl,qman-portal";
reg = <0x70000 0x4000>, <0x101c000 0x1000>;
interrupts = <160 0x2 0 0>;
cell-index = <0x1c>;
};
qportal29: qman-portal@74000 {
compatible = "fsl,qman-portal";
reg = <0x74000 0x4000>, <0x101d000 0x1000>;
interrupts = <162 0x2 0 0>;
cell-index = <0x1d>;
};
qportal30: qman-portal@78000 {
compatible = "fsl,qman-portal";
reg = <0x78000 0x4000>, <0x101e000 0x1000>;
interrupts = <164 0x2 0 0>;
cell-index = <0x1e>;
};
qportal31: qman-portal@7c000 {
compatible = "fsl,qman-portal";
reg = <0x7c000 0x4000>, <0x101f000 0x1000>;
interrupts = <166 0x2 0 0>;
cell-index = <0x1f>;
};
qportal32: qman-portal@80000 {
compatible = "fsl,qman-portal";
reg = <0x80000 0x4000>, <0x1020000 0x1000>;
interrupts = <168 0x2 0 0>;
cell-index = <0x20>;
};
qportal33: qman-portal@84000 {
compatible = "fsl,qman-portal";
reg = <0x84000 0x4000>, <0x1021000 0x1000>;
interrupts = <170 0x2 0 0>;
cell-index = <0x21>;
};
qportal34: qman-portal@88000 {
compatible = "fsl,qman-portal";
reg = <0x88000 0x4000>, <0x1022000 0x1000>;
interrupts = <172 0x2 0 0>;
cell-index = <0x22>;
};
qportal35: qman-portal@8c000 {
compatible = "fsl,qman-portal";
reg = <0x8c000 0x4000>, <0x1023000 0x1000>;
interrupts = <174 0x2 0 0>;
cell-index = <0x23>;
};
qportal36: qman-portal@90000 {
compatible = "fsl,qman-portal";
reg = <0x90000 0x4000>, <0x1024000 0x1000>;
interrupts = <384 0x2 0 0>;
cell-index = <0x24>;
};
qportal37: qman-portal@94000 {
compatible = "fsl,qman-portal";
reg = <0x94000 0x4000>, <0x1025000 0x1000>;
interrupts = <386 0x2 0 0>;
cell-index = <0x25>;
};
qportal38: qman-portal@98000 {
compatible = "fsl,qman-portal";
reg = <0x98000 0x4000>, <0x1026000 0x1000>;
interrupts = <388 0x2 0 0>;
cell-index = <0x26>;
};
qportal39: qman-portal@9c000 {
compatible = "fsl,qman-portal";
reg = <0x9c000 0x4000>, <0x1027000 0x1000>;
interrupts = <390 0x2 0 0>;
cell-index = <0x27>;
};
qportal40: qman-portal@a0000 {
compatible = "fsl,qman-portal";
reg = <0xa0000 0x4000>, <0x1028000 0x1000>;
interrupts = <392 0x2 0 0>;
cell-index = <0x28>;
};
qportal41: qman-portal@a4000 {
compatible = "fsl,qman-portal";
reg = <0xa4000 0x4000>, <0x1029000 0x1000>;
interrupts = <394 0x2 0 0>;
cell-index = <0x29>;
};
qportal42: qman-portal@a8000 {
compatible = "fsl,qman-portal";
reg = <0xa8000 0x4000>, <0x102a000 0x1000>;
interrupts = <396 0x2 0 0>;
cell-index = <0x2a>;
};
qportal43: qman-portal@ac000 {
compatible = "fsl,qman-portal";
reg = <0xac000 0x4000>, <0x102b000 0x1000>;
interrupts = <398 0x2 0 0>;
cell-index = <0x2b>;
};
qportal44: qman-portal@b0000 {
compatible = "fsl,qman-portal";
reg = <0xb0000 0x4000>, <0x102c000 0x1000>;
interrupts = <400 0x2 0 0>;
cell-index = <0x2c>;
};
qportal45: qman-portal@b4000 {
compatible = "fsl,qman-portal";
reg = <0xb4000 0x4000>, <0x102d000 0x1000>;
interrupts = <402 0x2 0 0>;
cell-index = <0x2d>;
};
qportal46: qman-portal@b8000 {
compatible = "fsl,qman-portal";
reg = <0xb8000 0x4000>, <0x102e000 0x1000>;
interrupts = <404 0x2 0 0>;
cell-index = <0x2e>;
};
qportal47: qman-portal@bc000 {
compatible = "fsl,qman-portal";
reg = <0xbc000 0x4000>, <0x102f000 0x1000>;
interrupts = <406 0x2 0 0>;
cell-index = <0x2f>;
};
qportal48: qman-portal@c0000 {
compatible = "fsl,qman-portal";
reg = <0xc0000 0x4000>, <0x1030000 0x1000>;
interrupts = <408 0x2 0 0>;
cell-index = <0x30>;
};
qportal49: qman-portal@c4000 {
compatible = "fsl,qman-portal";
reg = <0xc4000 0x4000>, <0x1031000 0x1000>;
interrupts = <410 0x2 0 0>;
cell-index = <0x31>;
};
};
&soc { &soc {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <1>; #size-cells = <1>;
...@@ -748,6 +1065,7 @@ usb1: usb@211000 { ...@@ -748,6 +1065,7 @@ usb1: usb@211000 {
/include/ "qoriq-sata2-0.dtsi" /include/ "qoriq-sata2-0.dtsi"
/include/ "qoriq-sata2-1.dtsi" /include/ "qoriq-sata2-1.dtsi"
/include/ "qoriq-sec5.0-0.dtsi" /include/ "qoriq-sec5.0-0.dtsi"
/include/ "qoriq-qman3.dtsi"
/include/ "qoriq-bman1.dtsi" /include/ "qoriq-bman1.dtsi"
L2_1: l2-cache-controller@c20000 { L2_1: l2-cache-controller@c20000 {
......
arch/powerpc/boot/dts/kmcoge4.dts
View file @ 08d183e3
...@@ -34,6 +34,14 @@ bman_fbpr: bman-fbpr { ...@@ -34,6 +34,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
dcsr: dcsr@f00000000 { dcsr: dcsr@f00000000 {
...@@ -44,6 +52,10 @@ bportals: bman-portals@ff4000000 { ...@@ -44,6 +52,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>; ranges = <0x0 0xf 0xf4000000 0x200000>;
}; };
qportals: qman-portals@ff4200000 {
ranges = <0x0 0xf 0xf4200000 0x200000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/boot/dts/oca4080.dts
View file @ 08d183e3
...@@ -58,6 +58,14 @@ bman_fbpr: bman-fbpr { ...@@ -58,6 +58,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
dcsr: dcsr@f00000000 { dcsr: dcsr@f00000000 {
...@@ -68,6 +76,10 @@ bportals: bman-portals@ff4000000 { ...@@ -68,6 +76,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>; ranges = <0x0 0xf 0xf4000000 0x200000>;
}; };
qportals: qman-portals@ff4200000 {
ranges = <0x0 0xf 0xf4200000 0x200000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/boot/dts/p1023rdb.dts
View file @ 08d183e3
...@@ -56,6 +56,18 @@ bman_fbpr: bman-fbpr { ...@@ -56,6 +56,18 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
};
qportals: qman-portals@ff000000 {
ranges = <0x0 0xf 0xff000000 0x200000>;
}; };
bportals: bman-portals@ff200000 { bportals: bman-portals@ff200000 {
......
arch/powerpc/boot/dts/p2041rdb.dts
View file @ 08d183e3
...@@ -54,6 +54,14 @@ bman_fbpr: bman-fbpr { ...@@ -54,6 +54,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
dcsr: dcsr@f00000000 { dcsr: dcsr@f00000000 {
...@@ -64,6 +72,10 @@ bportals: bman-portals@ff4000000 { ...@@ -64,6 +72,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>; ranges = <0x0 0xf 0xf4000000 0x200000>;
}; };
qportals: qman-portals@ff4200000 {
ranges = <0x0 0xf 0xf4200000 0x200000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/boot/dts/p3041ds.dts
View file @ 08d183e3
...@@ -54,6 +54,14 @@ bman_fbpr: bman-fbpr { ...@@ -54,6 +54,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
dcsr: dcsr@f00000000 { dcsr: dcsr@f00000000 {
...@@ -64,6 +72,10 @@ bportals: bman-portals@ff4000000 { ...@@ -64,6 +72,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>; ranges = <0x0 0xf 0xf4000000 0x200000>;
}; };
qportals: qman-portals@ff4200000 {
ranges = <0x0 0xf 0xf4200000 0x200000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/boot/dts/p4080ds.dts
View file @ 08d183e3
...@@ -54,6 +54,14 @@ bman_fbpr: bman-fbpr { ...@@ -54,6 +54,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
dcsr: dcsr@f00000000 { dcsr: dcsr@f00000000 {
...@@ -64,6 +72,10 @@ bportals: bman-portals@ff4000000 { ...@@ -64,6 +72,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>; ranges = <0x0 0xf 0xf4000000 0x200000>;
}; };
qportals: qman-portals@ff4200000 {
ranges = <0x0 0xf 0xf4200000 0x200000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/boot/dts/p5020ds.dts
View file @ 08d183e3
...@@ -54,6 +54,14 @@ bman_fbpr: bman-fbpr { ...@@ -54,6 +54,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
dcsr: dcsr@f00000000 { dcsr: dcsr@f00000000 {
...@@ -64,6 +72,10 @@ bportals: bman-portals@ff4000000 { ...@@ -64,6 +72,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>; ranges = <0x0 0xf 0xf4000000 0x200000>;
}; };
qportals: qman-portals@ff4200000 {
ranges = <0x0 0xf 0xf4200000 0x200000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/boot/dts/p5040ds.dts
View file @ 08d183e3
...@@ -54,6 +54,14 @@ bman_fbpr: bman-fbpr { ...@@ -54,6 +54,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
dcsr: dcsr@f00000000 { dcsr: dcsr@f00000000 {
...@@ -64,6 +72,10 @@ bportals: bman-portals@ff4000000 { ...@@ -64,6 +72,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>; ranges = <0x0 0xf 0xf4000000 0x200000>;
}; };
qportals: qman-portals@ff4200000 {
ranges = <0x0 0xf 0xf4200000 0x200000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/boot/dts/t1023rdb.dts 0 → 100644
View file @ 08d183e3
/*
* T1023 RDB Device Tree Source
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/t102xsi-pre.dtsi"
/ {
model = "fsl,T1023RDB";
compatible = "fsl,T1023RDB";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
1 0 0xf 0xff800000 0x00010000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
};
memory {
device_type = "memory";
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25fl512s";
reg = <0>;
spi-max-frequency = <10000000>; /* input clk */
};
};
i2c@118000 {
eeprom@50 {
compatible = "st,m24256";
reg = <0x50>;
};
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
interrupts = <0x5 0x1 0 0>;
};
};
i2c@118100 {
};
};
pci0: pcie@ffe240000 {
reg = <0xf 0xfe240000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe250000 {
reg = <0xf 0xfe250000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci2: pcie@ffe260000 {
reg = <0xf 0xfe260000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
};
/include/ "fsl/t1023si-post.dtsi"
arch/powerpc/boot/dts/t1024qds.dts 0 → 100644
View file @ 08d183e3
/*
* T1024 QDS Device Tree Source
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/t102xsi-pre.dtsi"
/ {
model = "fsl,T1024QDS";
compatible = "fsl,T1024QDS";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xff800000 0x00010000
3 0 0xf 0xffdf0000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
board-control@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,tetra-fpga", "fsl,fpga-qixis";
reg = <3 0 0x300>;
ranges = <0 3 0 0x300>;
};
};
memory {
device_type = "memory";
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a11"; /* 16MB */
reg = <0>;
spi-max-frequency = <10000000>;
};
flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,sst25wf040"; /* 512KB */
reg = <1>;
spi-max-frequency = <10000000>;
};
flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "eon,en25s64"; /* 8MB */
reg = <2>;
spi-max-frequency = <10000000>;
};
slic@2 {
compatible = "maxim,ds26522";
reg = <2>;
spi-max-frequency = <2000000>;
};
slic@3 {
compatible = "maxim,ds26522";
reg = <3>;
spi-max-frequency = <2000000>;
};
};
i2c@118000 {
pca9547@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0>;
eeprom@50 {
compatible = "atmel,24c512";
reg = <0x50>;
};
eeprom@51 {
compatible = "atmel,24c02";
reg = <0x51>;
};
eeprom@57 {
compatible = "atmel,24c02";
reg = <0x57>;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
};
i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3>;
adt7461@4c {
/* Thermal Monitor */
compatible = "adi,adt7461";
reg = <0x4c>;
};
eeprom@55 {
compatible = "atmel,24c02";
reg = <0x55>;
};
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
};
eeprom@57 {
compatible = "atmel,24c512";
reg = <0x57>;
};
};
};
rtc@68 {
compatible = "dallas,ds3232";
reg = <0x68>;
interrupts = <0x5 0x1 0 0>;
};
};
};
pci0: pcie@ffe240000 {
reg = <0xf 0xfe240000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe250000 {
reg = <0xf 0xfe250000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci2: pcie@ffe260000 {
reg = <0xf 0xfe260000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
};
/include/ "fsl/t1024si-post.dtsi"
arch/powerpc/boot/dts/t1024rdb.dts 0 → 100644
View file @ 08d183e3
/*
* T1024 RDB Device Tree Source
*
* Copyright 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "fsl/t102xsi-pre.dtsi"
/ {
model = "fsl,T1024RDB";
compatible = "fsl,T1024RDB";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xff800000 0x00010000
3 0 0xf 0xffdf0000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
board-control@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,t1024-cpld";
reg = <3 0 0x300>;
ranges = <0 3 0 0x300>;
bank-width = <1>;
device-width = <1>;
};
};
memory {
device_type = "memory";
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q512ax3";
reg = <0>;
spi-max-frequency = <10000000>; /* input clk */
};
slic@1 {
compatible = "maxim,ds26522";
reg = <1>;
spi-max-frequency = <2000000>;
};
slic@2 {
compatible = "maxim,ds26522";
reg = <2>;
spi-max-frequency = <2000000>;
};
};
i2c@118000 {
adt7461@4c {
/* Thermal Monitor */
compatible = "adi,adt7461";
reg = <0x4c>;
};
eeprom@50 {
compatible = "atmel,24c256";
reg = <0x50>;
};
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
interrupts = <0x1 0x1 0 0>;
};
};
i2c@118100 {
pca9546@77 {
compatible = "nxp,pca9546";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
pci0: pcie@ffe240000 {
reg = <0xf 0xfe240000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe250000 {
reg = <0xf 0xfe250000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci2: pcie@ffe260000 {
reg = <0xf 0xfe260000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
};
/include/ "fsl/t1024si-post.dtsi"
arch/powerpc/boot/dts/t104xqds.dtsi
View file @ 08d183e3
...@@ -47,6 +47,14 @@ bman_fbpr: bman-fbpr { ...@@ -47,6 +47,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
ifc: localbus@ffe124000 { ifc: localbus@ffe124000 {
...@@ -92,6 +100,10 @@ bportals: bman-portals@ff4000000 { ...@@ -92,6 +100,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>; ranges = <0x0 0xf 0xf4000000 0x2000000>;
}; };
qportals: qman-portals@ff6000000 {
ranges = <0x0 0xf 0xf6000000 0x2000000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/boot/dts/t104xrdb.dtsi
View file @ 08d183e3
...@@ -42,6 +42,14 @@ bman_fbpr: bman-fbpr { ...@@ -42,6 +42,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
ifc: localbus@ffe124000 { ifc: localbus@ffe124000 {
...@@ -83,6 +91,10 @@ bportals: bman-portals@ff4000000 { ...@@ -83,6 +91,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>; ranges = <0x0 0xf 0xf4000000 0x2000000>;
}; };
qportals: qman-portals@ff6000000 {
ranges = <0x0 0xf 0xf6000000 0x2000000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/boot/dts/t208xqds.dtsi
View file @ 08d183e3
...@@ -48,6 +48,14 @@ bman_fbpr: bman-fbpr { ...@@ -48,6 +48,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
ifc: localbus@ffe124000 { ifc: localbus@ffe124000 {
...@@ -93,6 +101,10 @@ bportals: bman-portals@ff4000000 { ...@@ -93,6 +101,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>; ranges = <0x0 0xf 0xf4000000 0x2000000>;
}; };
qportals: qman-portals@ff6000000 {
ranges = <0x0 0xf 0xf6000000 0x2000000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/boot/dts/t208xrdb.dtsi
View file @ 08d183e3
...@@ -48,6 +48,14 @@ bman_fbpr: bman-fbpr { ...@@ -48,6 +48,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
ifc: localbus@ffe124000 { ifc: localbus@ffe124000 {
...@@ -94,6 +102,10 @@ bportals: bman-portals@ff4000000 { ...@@ -94,6 +102,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>; ranges = <0x0 0xf 0xf4000000 0x2000000>;
}; };
qportals: qman-portals@ff6000000 {
ranges = <0x0 0xf 0xf6000000 0x2000000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/boot/dts/t4240qds.dts
View file @ 08d183e3
...@@ -109,6 +109,14 @@ bman_fbpr: bman-fbpr { ...@@ -109,6 +109,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
dcsr: dcsr@f00000000 { dcsr: dcsr@f00000000 {
...@@ -119,6 +127,10 @@ bportals: bman-portals@ff4000000 { ...@@ -119,6 +127,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>; ranges = <0x0 0xf 0xf4000000 0x2000000>;
}; };
qportals: qman-portals@ff6000000 {
ranges = <0x0 0xf 0xf6000000 0x2000000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/boot/dts/t4240rdb.dts
View file @ 08d183e3
...@@ -78,6 +78,14 @@ bman_fbpr: bman-fbpr { ...@@ -78,6 +78,14 @@ bman_fbpr: bman-fbpr {
size = <0 0x1000000>; size = <0 0x1000000>;
alignment = <0 0x1000000>; alignment = <0 0x1000000>;
}; };
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
}; };
dcsr: dcsr@f00000000 { dcsr: dcsr@f00000000 {
...@@ -88,6 +96,10 @@ bportals: bman-portals@ff4000000 { ...@@ -88,6 +96,10 @@ bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>; ranges = <0x0 0xf 0xf4000000 0x2000000>;
}; };
qportals: qman-portals@ff6000000 {
ranges = <0x0 0xf 0xf6000000 0x2000000>;
};
soc: soc@ffe000000 { soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>; ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>; reg = <0xf 0xfe000000 0 0x00001000>;
......
arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
View file @ 08d183e3
...@@ -108,7 +108,7 @@ CONFIG_SENSORS_LM90=y ...@@ -108,7 +108,7 @@ CONFIG_SENSORS_LM90=y
CONFIG_WATCHDOG=y CONFIG_WATCHDOG=y
CONFIG_USB=y CONFIG_USB=y
CONFIG_USB_MON=y CONFIG_USB_MON=y
CONFIG_USB_ISP1760_HCD=y CONFIG_USB_ISP1760=y
CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE=y
CONFIG_NEW_LEDS=y CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS=y
......
arch/powerpc/configs/le.config 0 → 100644
View file @ 08d183e3
CONFIG_CPU_LITTLE_ENDIAN=y
arch/powerpc/configs/ppc64_defconfig
View file @ 08d183e3
...@@ -155,6 +155,7 @@ CONFIG_ACENIC=m ...@@ -155,6 +155,7 @@ CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_PCNET32=y CONFIG_PCNET32=y
CONFIG_TIGON3=y CONFIG_TIGON3=y
CONFIG_BNX2X=m
CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1=m
CONFIG_BE2NET=m CONFIG_BE2NET=m
CONFIG_S2IO=m CONFIG_S2IO=m
......
arch/powerpc/configs/pseries_defconfig
View file @ 08d183e3
...@@ -154,6 +154,7 @@ CONFIG_ACENIC=m ...@@ -154,6 +154,7 @@ CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_PCNET32=y CONFIG_PCNET32=y
CONFIG_TIGON3=y CONFIG_TIGON3=y
CONFIG_BNX2X=m
CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1=m
CONFIG_BE2NET=m CONFIG_BE2NET=m
CONFIG_S2IO=m CONFIG_S2IO=m
...@@ -297,7 +298,6 @@ CONFIG_CODE_PATCHING_SELFTEST=y ...@@ -297,7 +298,6 @@ CONFIG_CODE_PATCHING_SELFTEST=y
CONFIG_FTR_FIXUP_SELFTEST=y CONFIG_FTR_FIXUP_SELFTEST=y
CONFIG_MSI_BITMAP_SELFTEST=y CONFIG_MSI_BITMAP_SELFTEST=y
CONFIG_XMON=y CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_HMAC=y
......
arch/powerpc/configs/pseries_le_defconfig deleted 100644 → 0
View file @ 4b1f2af6
CONFIG_PPC64=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2048
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_FHANDLE=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_SCHED=y
CONFIG_USER_NS=y
CONFIG_BLK_DEV_INITRD=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_PPC_SPLPAR=y
CONFIG_SCANLOG=m
CONFIG_PPC_SMLPAR=y
CONFIG_DTL=y
# CONFIG_PPC_PMAC is not set
CONFIG_RTAS_FLASH=m
CONFIG_IBMEBUS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_HZ_100=y
CONFIG_BINFMT_MISC=m
CONFIG_PPC_TRANSACTIONAL_MEM=y
CONFIG_KEXEC=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_KSM=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_PPC_64K_PAGES=y
CONFIG_PPC_SUBPAGE_PROT=y
CONFIG_SCHED_SMT=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_NET_IPIP=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_VIRTIO_BLK=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_CXGB3_ISCSI=m
CONFIG_SCSI_CXGB4_ISCSI=m
CONFIG_SCSI_BNX2_ISCSI=m
CONFIG_BE2ISCSI=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_SCSI_IBMVSCSI=y
CONFIG_SCSI_IBMVFC=m
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_IPR=y
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_VIRTIO=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_UEVENT=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_VXLAN=m
CONFIG_NETCONSOLE=y
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_VHOST_NET=m
CONFIG_VORTEX=y
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_PCNET32=y
CONFIG_TIGON3=y
CONFIG_CHELSIO_T1=m
CONFIG_BE2NET=m
CONFIG_S2IO=m
CONFIG_IBMVETH=y
CONFIG_EHEA=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_IXGB=m
CONFIG_IXGBE=m
CONFIG_MLX4_EN=m
CONFIG_MYRI10GE=m
CONFIG_QLGE=m
CONFIG_NETXEN_NIC=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_SERIO_SERPORT is not set
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_ICOM=m
CONFIG_SERIAL_JSM=m
CONFIG_HVC_CONSOLE=y
CONFIG_HVC_RTAS=y
CONFIG_HVCS=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IBM_BSR=m
CONFIG_GEN_RTC=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=1024
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_OF=y
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_RADEON=y
CONFIG_FB_IBM_GXT4500=y
CONFIG_LCD_PLATFORM=m
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
CONFIG_HID_GYRATION=y
CONFIG_HID_PANTHERLORD=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SUNPLUS=y
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
CONFIG_USB_MON=m
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=m
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_EHCA=m
CONFIG_INFINIBAND_CXGB3=m
CONFIG_INFINIBAND_CXGB4=m
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_XFS_FS=m
CONFIG_XFS_POSIX_ACL=y
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_OVERLAY_FS=m
CONFIG_ISO9660_FS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_PSTORE=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_CIFS=m
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_LATENCYTOP=y
CONFIG_SCHED_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_CODE_PATCHING_SELFTEST=y
CONFIG_FTR_FIXUP_SELFTEST=y
CONFIG_MSI_BITMAP_SELFTEST=y
CONFIG_XMON=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_VIRTUALIZATION=y
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_HV=m
arch/powerpc/include/asm/cputable.h
View file @ 08d183e3
...@@ -242,11 +242,13 @@ enum { ...@@ -242,11 +242,13 @@ enum {
/* We only set the TM feature if the kernel was compiled with TM supprt */ /* We only set the TM feature if the kernel was compiled with TM supprt */
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
#define CPU_FTR_TM_COMP CPU_FTR_TM #define CPU_FTR_TM_COMP CPU_FTR_TM
#define PPC_FEATURE2_HTM_COMP PPC_FEATURE2_HTM #define PPC_FEATURE2_HTM_COMP PPC_FEATURE2_HTM
#define PPC_FEATURE2_HTM_NOSC_COMP PPC_FEATURE2_HTM_NOSC
#else #else
#define CPU_FTR_TM_COMP 0 #define CPU_FTR_TM_COMP 0
#define PPC_FEATURE2_HTM_COMP 0 #define PPC_FEATURE2_HTM_COMP 0
#define PPC_FEATURE2_HTM_NOSC_COMP 0
#endif #endif
/* We need to mark all pages as being coherent if we're SMP or we have a /* We need to mark all pages as being coherent if we're SMP or we have a
...@@ -366,7 +368,7 @@ enum { ...@@ -366,7 +368,7 @@ enum {
CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | \ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | \
CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE) CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE)
#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | CPU_FTR_USE_TB) #define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | CPU_FTR_USE_TB)
#define CPU_FTRS_8XX (CPU_FTR_USE_TB) #define CPU_FTRS_8XX (CPU_FTR_USE_TB | CPU_FTR_NOEXECUTE)
#define CPU_FTRS_40X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) #define CPU_FTRS_40X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
#define CPU_FTRS_44X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE) #define CPU_FTRS_44X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
#define CPU_FTRS_440x6 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE | \ #define CPU_FTRS_440x6 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE | \
......
arch/powerpc/include/asm/cputhreads.h
View file @ 08d183e3
...@@ -31,9 +31,9 @@ extern cpumask_t threads_core_mask; ...@@ -31,9 +31,9 @@ extern cpumask_t threads_core_mask;
/* cpu_thread_mask_to_cores - Return a cpumask of one per cores /* cpu_thread_mask_to_cores - Return a cpumask of one per cores
* hit by the argument * hit by the argument
* *
* @threads: a cpumask of threads * @threads: a cpumask of online threads
* *
* This function returns a cpumask which will have one "cpu" (or thread) * This function returns a cpumask which will have one online cpu's
* bit set for each core that has at least one thread set in the argument. * bit set for each core that has at least one thread set in the argument.
* *
* This can typically be used for things like IPI for tlb invalidations * This can typically be used for things like IPI for tlb invalidations
...@@ -42,13 +42,16 @@ extern cpumask_t threads_core_mask; ...@@ -42,13 +42,16 @@ extern cpumask_t threads_core_mask;
static inline cpumask_t cpu_thread_mask_to_cores(const struct cpumask *threads) static inline cpumask_t cpu_thread_mask_to_cores(const struct cpumask *threads)
{ {
cpumask_t tmp, res; cpumask_t tmp, res;
int i; int i, cpu;
cpumask_clear(&res); cpumask_clear(&res);
for (i = 0; i < NR_CPUS; i += threads_per_core) { for (i = 0; i < NR_CPUS; i += threads_per_core) {
cpumask_shift_left(&tmp, &threads_core_mask, i); cpumask_shift_left(&tmp, &threads_core_mask, i);
if (cpumask_intersects(threads, &tmp)) if (cpumask_intersects(threads, &tmp)) {
cpumask_set_cpu(i, &res); cpu = cpumask_next_and(-1, &tmp, cpu_online_mask);
if (cpu < nr_cpu_ids)
cpumask_set_cpu(cpu, &res);
}
} }
return res; return res;
} }
......
arch/powerpc/include/asm/device.h
View file @ 08d183e3
...@@ -46,6 +46,9 @@ struct dev_archdata { ...@@ -46,6 +46,9 @@ struct dev_archdata {
#ifdef CONFIG_FAIL_IOMMU #ifdef CONFIG_FAIL_IOMMU
int fail_iommu; int fail_iommu;
#endif #endif
#ifdef CONFIG_CXL_BASE
struct cxl_context *cxl_ctx;
#endif
}; };
struct pdev_archdata { struct pdev_archdata {
......
arch/powerpc/include/asm/eeh.h
View file @ 08d183e3
...@@ -27,6 +27,8 @@ ...@@ -27,6 +27,8 @@
#include <linux/time.h> #include <linux/time.h>
#include <linux/atomic.h> #include <linux/atomic.h>
#include <uapi/asm/eeh.h>
struct pci_dev; struct pci_dev;
struct pci_bus; struct pci_bus;
struct pci_dn; struct pci_dn;
...@@ -185,11 +187,6 @@ enum { ...@@ -185,11 +187,6 @@ enum {
#define EEH_STATE_DMA_ACTIVE (1 << 4) /* Active DMA */ #define EEH_STATE_DMA_ACTIVE (1 << 4) /* Active DMA */
#define EEH_STATE_MMIO_ENABLED (1 << 5) /* MMIO enabled */ #define EEH_STATE_MMIO_ENABLED (1 << 5) /* MMIO enabled */
#define EEH_STATE_DMA_ENABLED (1 << 6) /* DMA enabled */ #define EEH_STATE_DMA_ENABLED (1 << 6) /* DMA enabled */
#define EEH_PE_STATE_NORMAL 0 /* Normal state */
#define EEH_PE_STATE_RESET 1 /* PE reset asserted */
#define EEH_PE_STATE_STOPPED_IO_DMA 2 /* Frozen PE */
#define EEH_PE_STATE_STOPPED_DMA 4 /* Stopped DMA, Enabled IO */
#define EEH_PE_STATE_UNAVAIL 5 /* Unavailable */
#define EEH_RESET_DEACTIVATE 0 /* Deactivate the PE reset */ #define EEH_RESET_DEACTIVATE 0 /* Deactivate the PE reset */
#define EEH_RESET_HOT 1 /* Hot reset */ #define EEH_RESET_HOT 1 /* Hot reset */
#define EEH_RESET_FUNDAMENTAL 3 /* Fundamental reset */ #define EEH_RESET_FUNDAMENTAL 3 /* Fundamental reset */
...@@ -294,6 +291,8 @@ int eeh_pe_set_option(struct eeh_pe *pe, int option); ...@@ -294,6 +291,8 @@ int eeh_pe_set_option(struct eeh_pe *pe, int option);
int eeh_pe_get_state(struct eeh_pe *pe); int eeh_pe_get_state(struct eeh_pe *pe);
int eeh_pe_reset(struct eeh_pe *pe, int option); int eeh_pe_reset(struct eeh_pe *pe, int option);
int eeh_pe_configure(struct eeh_pe *pe); int eeh_pe_configure(struct eeh_pe *pe);
int eeh_pe_inject_err(struct eeh_pe *pe, int type, int func,
unsigned long addr, unsigned long mask);
/** /**
* EEH_POSSIBLE_ERROR() -- test for possible MMIO failure. * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
......
arch/powerpc/include/asm/iommu.h
View file @ 08d183e3
...@@ -44,6 +44,39 @@ ...@@ -44,6 +44,39 @@
extern int iommu_is_off; extern int iommu_is_off;
extern int iommu_force_on; extern int iommu_force_on;
struct iommu_table_ops {
/*
* When called with direction==DMA_NONE, it is equal to clear().
* uaddr is a linear map address.
*/
int (*set)(struct iommu_table *tbl,
long index, long npages,
unsigned long uaddr,
enum dma_data_direction direction,
struct dma_attrs *attrs);
#ifdef CONFIG_IOMMU_API
/*
* Exchanges existing TCE with new TCE plus direction bits;
* returns old TCE and DMA direction mask.
* @tce is a physical address.
*/
int (*exchange)(struct iommu_table *tbl,
long index,
unsigned long *hpa,
enum dma_data_direction *direction);
#endif
void (*clear)(struct iommu_table *tbl,
long index, long npages);
/* get() returns a physical address */
unsigned long (*get)(struct iommu_table *tbl, long index);
void (*flush)(struct iommu_table *tbl);
void (*free)(struct iommu_table *tbl);
};
/* These are used by VIO */
extern struct iommu_table_ops iommu_table_lpar_multi_ops;
extern struct iommu_table_ops iommu_table_pseries_ops;
/* /*
* IOMAP_MAX_ORDER defines the largest contiguous block * IOMAP_MAX_ORDER defines the largest contiguous block
* of dma space we can get. IOMAP_MAX_ORDER = 13 * of dma space we can get. IOMAP_MAX_ORDER = 13
...@@ -64,6 +97,9 @@ struct iommu_pool { ...@@ -64,6 +97,9 @@ struct iommu_pool {
struct iommu_table { struct iommu_table {
unsigned long it_busno; /* Bus number this table belongs to */ unsigned long it_busno; /* Bus number this table belongs to */
unsigned long it_size; /* Size of iommu table in entries */ unsigned long it_size; /* Size of iommu table in entries */
unsigned long it_indirect_levels;
unsigned long it_level_size;
unsigned long it_allocated_size;
unsigned long it_offset; /* Offset into global table */ unsigned long it_offset; /* Offset into global table */
unsigned long it_base; /* mapped address of tce table */ unsigned long it_base; /* mapped address of tce table */
unsigned long it_index; /* which iommu table this is */ unsigned long it_index; /* which iommu table this is */
...@@ -75,15 +111,16 @@ struct iommu_table { ...@@ -75,15 +111,16 @@ struct iommu_table {
struct iommu_pool pools[IOMMU_NR_POOLS]; struct iommu_pool pools[IOMMU_NR_POOLS];
unsigned long *it_map; /* A simple allocation bitmap for now */ unsigned long *it_map; /* A simple allocation bitmap for now */
unsigned long it_page_shift;/* table iommu page size */ unsigned long it_page_shift;/* table iommu page size */
#ifdef CONFIG_IOMMU_API struct list_head it_group_list;/* List of iommu_table_group_link */
struct iommu_group *it_group; unsigned long *it_userspace; /* userspace view of the table */
#endif struct iommu_table_ops *it_ops;
void (*set_bypass)(struct iommu_table *tbl, bool enable);
#ifdef CONFIG_PPC_POWERNV
void *data;
#endif
}; };
#define IOMMU_TABLE_USERSPACE_ENTRY(tbl, entry) \
((tbl)->it_userspace ? \
&((tbl)->it_userspace[(entry) - (tbl)->it_offset]) : \
NULL)
/* Pure 2^n version of get_order */ /* Pure 2^n version of get_order */
static inline __attribute_const__ static inline __attribute_const__
int get_iommu_order(unsigned long size, struct iommu_table *tbl) int get_iommu_order(unsigned long size, struct iommu_table *tbl)
...@@ -112,14 +149,62 @@ extern void iommu_free_table(struct iommu_table *tbl, const char *node_name); ...@@ -112,14 +149,62 @@ extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
*/ */
extern struct iommu_table *iommu_init_table(struct iommu_table * tbl, extern struct iommu_table *iommu_init_table(struct iommu_table * tbl,
int nid); int nid);
#define IOMMU_TABLE_GROUP_MAX_TABLES 2
struct iommu_table_group;
struct iommu_table_group_ops {
unsigned long (*get_table_size)(
__u32 page_shift,
__u64 window_size,
__u32 levels);
long (*create_table)(struct iommu_table_group *table_group,
int num,
__u32 page_shift,
__u64 window_size,
__u32 levels,
struct iommu_table **ptbl);
long (*set_window)(struct iommu_table_group *table_group,
int num,
struct iommu_table *tblnew);
long (*unset_window)(struct iommu_table_group *table_group,
int num);
/* Switch ownership from platform code to external user (e.g. VFIO) */
void (*take_ownership)(struct iommu_table_group *table_group);
/* Switch ownership from external user (e.g. VFIO) back to core */
void (*release_ownership)(struct iommu_table_group *table_group);
};
struct iommu_table_group_link {
struct list_head next;
struct rcu_head rcu;
struct iommu_table_group *table_group;
};
struct iommu_table_group {
/* IOMMU properties */
__u32 tce32_start;
__u32 tce32_size;
__u64 pgsizes; /* Bitmap of supported page sizes */
__u32 max_dynamic_windows_supported;
__u32 max_levels;
struct iommu_group *group;
struct iommu_table *tables[IOMMU_TABLE_GROUP_MAX_TABLES];
struct iommu_table_group_ops *ops;
};
#ifdef CONFIG_IOMMU_API #ifdef CONFIG_IOMMU_API
extern void iommu_register_group(struct iommu_table *tbl,
extern void iommu_register_group(struct iommu_table_group *table_group,
int pci_domain_number, unsigned long pe_num); int pci_domain_number, unsigned long pe_num);
extern int iommu_add_device(struct device *dev); extern int iommu_add_device(struct device *dev);
extern void iommu_del_device(struct device *dev); extern void iommu_del_device(struct device *dev);
extern int __init tce_iommu_bus_notifier_init(void); extern int __init tce_iommu_bus_notifier_init(void);
extern long iommu_tce_xchg(struct iommu_table *tbl, unsigned long entry,
unsigned long *hpa, enum dma_data_direction *direction);
#else #else
static inline void iommu_register_group(struct iommu_table *tbl, static inline void iommu_register_group(struct iommu_table_group *table_group,
int pci_domain_number, int pci_domain_number,
unsigned long pe_num) unsigned long pe_num)
{ {
...@@ -140,13 +225,6 @@ static inline int __init tce_iommu_bus_notifier_init(void) ...@@ -140,13 +225,6 @@ static inline int __init tce_iommu_bus_notifier_init(void)
} }
#endif /* !CONFIG_IOMMU_API */ #endif /* !CONFIG_IOMMU_API */
static inline void set_iommu_table_base_and_group(struct device *dev,
void *base)
{
set_iommu_table_base(dev, base);
iommu_add_device(dev);
}
extern int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl, extern int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl,
struct scatterlist *sglist, int nelems, struct scatterlist *sglist, int nelems,
unsigned long mask, unsigned long mask,
...@@ -197,20 +275,13 @@ extern int iommu_tce_clear_param_check(struct iommu_table *tbl, ...@@ -197,20 +275,13 @@ extern int iommu_tce_clear_param_check(struct iommu_table *tbl,
unsigned long npages); unsigned long npages);
extern int iommu_tce_put_param_check(struct iommu_table *tbl, extern int iommu_tce_put_param_check(struct iommu_table *tbl,
unsigned long ioba, unsigned long tce); unsigned long ioba, unsigned long tce);
extern int iommu_tce_build(struct iommu_table *tbl, unsigned long entry,
unsigned long hwaddr, enum dma_data_direction direction);
extern unsigned long iommu_clear_tce(struct iommu_table *tbl,
unsigned long entry);
extern int iommu_clear_tces_and_put_pages(struct iommu_table *tbl,
unsigned long entry, unsigned long pages);
extern int iommu_put_tce_user_mode(struct iommu_table *tbl,
unsigned long entry, unsigned long tce);
extern void iommu_flush_tce(struct iommu_table *tbl); extern void iommu_flush_tce(struct iommu_table *tbl);
extern int iommu_take_ownership(struct iommu_table *tbl); extern int iommu_take_ownership(struct iommu_table *tbl);
extern void iommu_release_ownership(struct iommu_table *tbl); extern void iommu_release_ownership(struct iommu_table *tbl);
extern enum dma_data_direction iommu_tce_direction(unsigned long tce); extern enum dma_data_direction iommu_tce_direction(unsigned long tce);
extern unsigned long iommu_direction_to_tce_perm(enum dma_data_direction dir);
#endif /* __KERNEL__ */ #endif /* __KERNEL__ */
#endif /* _ASM_IOMMU_H */ #endif /* _ASM_IOMMU_H */
arch/powerpc/include/asm/machdep.h
View file @ 08d183e3
...@@ -65,31 +65,6 @@ struct machdep_calls { ...@@ -65,31 +65,6 @@ struct machdep_calls {
* destroyed as well */ * destroyed as well */
void (*hpte_clear_all)(void); void (*hpte_clear_all)(void);
int (*tce_build)(struct iommu_table *tbl,
long index,
long npages,
unsigned long uaddr,
enum dma_data_direction direction,
struct dma_attrs *attrs);
void (*tce_free)(struct iommu_table *tbl,
long index,
long npages);
unsigned long (*tce_get)(struct iommu_table *tbl,
long index);
void (*tce_flush)(struct iommu_table *tbl);
/* _rm versions are for real mode use only */
int (*tce_build_rm)(struct iommu_table *tbl,
long index,
long npages,
unsigned long uaddr,
enum dma_data_direction direction,
struct dma_attrs *attrs);
void (*tce_free_rm)(struct iommu_table *tbl,
long index,
long npages);
void (*tce_flush_rm)(struct iommu_table *tbl);
void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size, void __iomem * (*ioremap)(phys_addr_t addr, unsigned long size,
unsigned long flags, void *caller); unsigned long flags, void *caller);
void (*iounmap)(volatile void __iomem *token); void (*iounmap)(volatile void __iomem *token);
...@@ -131,12 +106,6 @@ struct machdep_calls { ...@@ -131,12 +106,6 @@ struct machdep_calls {
/* To setup PHBs when using automatic OF platform driver for PCI */ /* To setup PHBs when using automatic OF platform driver for PCI */
int (*pci_setup_phb)(struct pci_controller *host); int (*pci_setup_phb)(struct pci_controller *host);
#ifdef CONFIG_PCI_MSI
int (*setup_msi_irqs)(struct pci_dev *dev,
int nvec, int type);
void (*teardown_msi_irqs)(struct pci_dev *dev);
#endif
void (*restart)(char *cmd); void (*restart)(char *cmd);
void (*halt)(void); void (*halt)(void);
void (*panic)(char *str); void (*panic)(char *str);
......
arch/powerpc/include/asm/mmu-8xx.h
View file @ 08d183e3
...@@ -27,6 +27,19 @@ ...@@ -27,6 +27,19 @@
#define MI_Ks 0x80000000 /* Should not be set */ #define MI_Ks 0x80000000 /* Should not be set */
#define MI_Kp 0x40000000 /* Should always be set */ #define MI_Kp 0x40000000 /* Should always be set */
/*
* All pages' PP exec bits are set to 000, which means Execute for Supervisor
* and no Execute for User.
* Then we use the APG to say whether accesses are according to Page rules,
* "all Supervisor" rules (Exec for all) and "all User" rules (Exec for noone)
* Therefore, we define 4 APG groups. msb is _PAGE_EXEC, lsb is _PAGE_USER
* 0 (00) => Not User, no exec => 11 (all accesses performed as user)
* 1 (01) => User but no exec => 11 (all accesses performed as user)
* 2 (10) => Not User, exec => 01 (rights according to page definition)
* 3 (11) => User, exec => 00 (all accesses performed as supervisor)
*/
#define MI_APG_INIT 0xf4ffffff
/* The effective page number register. When read, contains the information /* The effective page number register. When read, contains the information
* about the last instruction TLB miss. When MI_RPN is written, bits in * about the last instruction TLB miss. When MI_RPN is written, bits in
* this register are used to create the TLB entry. * this register are used to create the TLB entry.
...@@ -87,6 +100,19 @@ ...@@ -87,6 +100,19 @@
#define MD_Ks 0x80000000 /* Should not be set */ #define MD_Ks 0x80000000 /* Should not be set */
#define MD_Kp 0x40000000 /* Should always be set */ #define MD_Kp 0x40000000 /* Should always be set */
/*
* All pages' PP data bits are set to either 000 or 011, which means
* respectively RW for Supervisor and no access for User, or RO for
* Supervisor and no access for user.
* Then we use the APG to say whether accesses are according to Page rules or
* "all Supervisor" rules (Access to all)
* Therefore, we define 2 APG groups. lsb is _PAGE_USER
* 0 => No user => 01 (all accesses performed according to page definition)
* 1 => User => 00 (all accesses performed as supervisor
* according to page definition)
*/
#define MD_APG_INIT 0x4fffffff
/* The effective page number register. When read, contains the information /* The effective page number register. When read, contains the information
* about the last instruction TLB miss. When MD_RPN is written, bits in * about the last instruction TLB miss. When MD_RPN is written, bits in
* this register are used to create the TLB entry. * this register are used to create the TLB entry.
...@@ -145,7 +171,14 @@ typedef struct { ...@@ -145,7 +171,14 @@ typedef struct {
} mm_context_t; } mm_context_t;
#endif /* !__ASSEMBLY__ */ #endif /* !__ASSEMBLY__ */
#if (PAGE_SHIFT == 12)
#define mmu_virtual_psize MMU_PAGE_4K #define mmu_virtual_psize MMU_PAGE_4K
#elif (PAGE_SHIFT == 14)
#define mmu_virtual_psize MMU_PAGE_16K
#else
#error "Unsupported PAGE_SIZE"
#endif
#define mmu_linear_psize MMU_PAGE_8M #define mmu_linear_psize MMU_PAGE_8M
#endif /* _ASM_POWERPC_MMU_8XX_H_ */ #endif /* _ASM_POWERPC_MMU_8XX_H_ */
arch/powerpc/include/asm/mmu-hash64.h
View file @ 08d183e3
...@@ -536,6 +536,9 @@ typedef struct { ...@@ -536,6 +536,9 @@ typedef struct {
/* for 4K PTE fragment support */ /* for 4K PTE fragment support */
void *pte_frag; void *pte_frag;
#endif #endif
#ifdef CONFIG_SPAPR_TCE_IOMMU
struct list_head iommu_group_mem_list;
#endif
} mm_context_t; } mm_context_t;
......
arch/powerpc/include/asm/mmu_context.h
View file @ 08d183e3
...@@ -16,6 +16,24 @@ ...@@ -16,6 +16,24 @@
*/ */
extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
extern void destroy_context(struct mm_struct *mm); extern void destroy_context(struct mm_struct *mm);
#ifdef CONFIG_SPAPR_TCE_IOMMU
struct mm_iommu_table_group_mem_t;
extern bool mm_iommu_preregistered(void);
extern long mm_iommu_get(unsigned long ua, unsigned long entries,
struct mm_iommu_table_group_mem_t **pmem);
extern long mm_iommu_put(struct mm_iommu_table_group_mem_t *mem);
extern void mm_iommu_init(mm_context_t *ctx);
extern void mm_iommu_cleanup(mm_context_t *ctx);
extern struct mm_iommu_table_group_mem_t *mm_iommu_lookup(unsigned long ua,
unsigned long size);
extern struct mm_iommu_table_group_mem_t *mm_iommu_find(unsigned long ua,
unsigned long entries);
extern long mm_iommu_ua_to_hpa(struct mm_iommu_table_group_mem_t *mem,
unsigned long ua, unsigned long *hpa);
extern long mm_iommu_mapped_inc(struct mm_iommu_table_group_mem_t *mem);
extern void mm_iommu_mapped_dec(struct mm_iommu_table_group_mem_t *mem);
#endif
extern void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next); extern void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next);
extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm); extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
......
arch/powerpc/include/asm/opal-api.h
View file @ 08d183e3
...@@ -153,7 +153,8 @@ ...@@ -153,7 +153,8 @@
#define OPAL_FLASH_READ 110 #define OPAL_FLASH_READ 110
#define OPAL_FLASH_WRITE 111 #define OPAL_FLASH_WRITE 111
#define OPAL_FLASH_ERASE 112 #define OPAL_FLASH_ERASE 112
#define OPAL_LAST 112 #define OPAL_PRD_MSG 113
#define OPAL_LAST 113
/* Device tree flags */ /* Device tree flags */
...@@ -165,6 +166,13 @@ ...@@ -165,6 +166,13 @@
#define OPAL_PM_WINKLE_ENABLED 0x00040000 #define OPAL_PM_WINKLE_ENABLED 0x00040000
#define OPAL_PM_SLEEP_ENABLED_ER1 0x00080000 /* with workaround */ #define OPAL_PM_SLEEP_ENABLED_ER1 0x00080000 /* with workaround */
/*
* OPAL_CONFIG_CPU_IDLE_STATE parameters
*/
#define OPAL_CONFIG_IDLE_FASTSLEEP 1
#define OPAL_CONFIG_IDLE_UNDO 0
#define OPAL_CONFIG_IDLE_APPLY 1
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
/* Other enums */ /* Other enums */
...@@ -352,6 +360,7 @@ enum opal_msg_type { ...@@ -352,6 +360,7 @@ enum opal_msg_type {
OPAL_MSG_SHUTDOWN, /* params[0] = 1 reboot, 0 shutdown */ OPAL_MSG_SHUTDOWN, /* params[0] = 1 reboot, 0 shutdown */
OPAL_MSG_HMI_EVT, OPAL_MSG_HMI_EVT,
OPAL_MSG_DPO, OPAL_MSG_DPO,
OPAL_MSG_PRD,
OPAL_MSG_TYPE_MAX, OPAL_MSG_TYPE_MAX,
}; };
...@@ -674,6 +683,23 @@ typedef struct oppanel_line { ...@@ -674,6 +683,23 @@ typedef struct oppanel_line {
__be64 line_len; __be64 line_len;
} oppanel_line_t; } oppanel_line_t;
enum opal_prd_msg_type {
OPAL_PRD_MSG_TYPE_INIT = 0, /* HBRT --> OPAL */
OPAL_PRD_MSG_TYPE_FINI, /* HBRT/kernel --> OPAL */
OPAL_PRD_MSG_TYPE_ATTN, /* HBRT <-- OPAL */
OPAL_PRD_MSG_TYPE_ATTN_ACK, /* HBRT --> OPAL */
OPAL_PRD_MSG_TYPE_OCC_ERROR, /* HBRT <-- OPAL */
OPAL_PRD_MSG_TYPE_OCC_RESET, /* HBRT <-- OPAL */
};
struct opal_prd_msg_header {
uint8_t type;
uint8_t pad[1];
__be16 size;
};
struct opal_prd_msg;
/* /*
* SG entries * SG entries
* *
......
arch/powerpc/include/asm/opal.h
View file @ 08d183e3
...@@ -186,6 +186,7 @@ int64_t opal_handle_hmi(void); ...@@ -186,6 +186,7 @@ int64_t opal_handle_hmi(void);
int64_t opal_register_dump_region(uint32_t id, uint64_t start, uint64_t end); int64_t opal_register_dump_region(uint32_t id, uint64_t start, uint64_t end);
int64_t opal_unregister_dump_region(uint32_t id); int64_t opal_unregister_dump_region(uint32_t id);
int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val); int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val);
int64_t opal_config_cpu_idle_state(uint64_t state, uint64_t flag);
int64_t opal_pci_set_phb_cxl_mode(uint64_t phb_id, uint64_t mode, uint64_t pe_number); int64_t opal_pci_set_phb_cxl_mode(uint64_t phb_id, uint64_t mode, uint64_t pe_number);
int64_t opal_ipmi_send(uint64_t interface, struct opal_ipmi_msg *msg, int64_t opal_ipmi_send(uint64_t interface, struct opal_ipmi_msg *msg,
uint64_t msg_len); uint64_t msg_len);
...@@ -193,6 +194,7 @@ int64_t opal_ipmi_recv(uint64_t interface, struct opal_ipmi_msg *msg, ...@@ -193,6 +194,7 @@ int64_t opal_ipmi_recv(uint64_t interface, struct opal_ipmi_msg *msg,
uint64_t *msg_len); uint64_t *msg_len);
int64_t opal_i2c_request(uint64_t async_token, uint32_t bus_id, int64_t opal_i2c_request(uint64_t async_token, uint32_t bus_id,
struct opal_i2c_request *oreq); struct opal_i2c_request *oreq);
int64_t opal_prd_msg(struct opal_prd_msg *msg);
int64_t opal_flash_read(uint64_t id, uint64_t offset, uint64_t buf, int64_t opal_flash_read(uint64_t id, uint64_t offset, uint64_t buf,
uint64_t size, uint64_t token); uint64_t size, uint64_t token);
...@@ -239,6 +241,10 @@ extern int opal_elog_init(void); ...@@ -239,6 +241,10 @@ extern int opal_elog_init(void);
extern void opal_platform_dump_init(void); extern void opal_platform_dump_init(void);
extern void opal_sys_param_init(void); extern void opal_sys_param_init(void);
extern void opal_msglog_init(void); extern void opal_msglog_init(void);
extern int opal_async_comp_init(void);
extern int opal_sensor_init(void);
extern int opal_hmi_handler_init(void);
extern int opal_event_init(void);
extern int opal_machine_check(struct pt_regs *regs); extern int opal_machine_check(struct pt_regs *regs);
extern bool opal_mce_check_early_recovery(struct pt_regs *regs); extern bool opal_mce_check_early_recovery(struct pt_regs *regs);
...@@ -250,6 +256,8 @@ extern int opal_resync_timebase(void); ...@@ -250,6 +256,8 @@ extern int opal_resync_timebase(void);
extern void opal_lpc_init(void); extern void opal_lpc_init(void);
extern int opal_event_request(unsigned int opal_event_nr);
struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr, struct opal_sg_list *opal_vmalloc_to_sg_list(void *vmalloc_addr,
unsigned long vmalloc_size); unsigned long vmalloc_size);
void opal_free_sg_list(struct opal_sg_list *sg); void opal_free_sg_list(struct opal_sg_list *sg);
......
arch/powerpc/include/asm/page.h
View file @ 08d183e3
...@@ -278,9 +278,7 @@ extern long long virt_phys_offset; ...@@ -278,9 +278,7 @@ extern long long virt_phys_offset;
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
#undef STRICT_MM_TYPECHECKS #ifdef CONFIG_STRICT_MM_TYPECHECKS
#ifdef STRICT_MM_TYPECHECKS
/* These are used to make use of C type-checking. */ /* These are used to make use of C type-checking. */
/* PTE level */ /* PTE level */
......
arch/powerpc/include/asm/pci-bridge.h
View file @ 08d183e3
...@@ -27,9 +27,23 @@ struct pci_controller_ops { ...@@ -27,9 +27,23 @@ struct pci_controller_ops {
* allow assignment/enabling of the device. */ * allow assignment/enabling of the device. */
bool (*enable_device_hook)(struct pci_dev *); bool (*enable_device_hook)(struct pci_dev *);
void (*disable_device)(struct pci_dev *);
void (*release_device)(struct pci_dev *);
/* Called during PCI resource reassignment */ /* Called during PCI resource reassignment */
resource_size_t (*window_alignment)(struct pci_bus *, unsigned long type); resource_size_t (*window_alignment)(struct pci_bus *, unsigned long type);
void (*reset_secondary_bus)(struct pci_dev *dev); void (*reset_secondary_bus)(struct pci_dev *dev);
#ifdef CONFIG_PCI_MSI
int (*setup_msi_irqs)(struct pci_dev *dev,
int nvec, int type);
void (*teardown_msi_irqs)(struct pci_dev *dev);
#endif
int (*dma_set_mask)(struct pci_dev *dev, u64 dma_mask);
void (*shutdown)(struct pci_controller *);
}; };
/* /*
...@@ -185,7 +199,7 @@ struct pci_dn { ...@@ -185,7 +199,7 @@ struct pci_dn {
struct pci_dn *parent; struct pci_dn *parent;
struct pci_controller *phb; /* for pci devices */ struct pci_controller *phb; /* for pci devices */
struct iommu_table *iommu_table; /* for phb's or bridges */ struct iommu_table_group *table_group; /* for phb's or bridges */
struct device_node *node; /* back-pointer to the device_node */ struct device_node *node; /* back-pointer to the device_node */
int pci_ext_config_space; /* for pci devices */ int pci_ext_config_space; /* for pci devices */
......
arch/powerpc/include/asm/pgtable-ppc32.h
View file @ 08d183e3
...@@ -170,24 +170,6 @@ static inline unsigned long pte_update(pte_t *p, ...@@ -170,24 +170,6 @@ static inline unsigned long pte_update(pte_t *p,
#ifdef PTE_ATOMIC_UPDATES #ifdef PTE_ATOMIC_UPDATES
unsigned long old, tmp; unsigned long old, tmp;
#ifdef CONFIG_PPC_8xx
unsigned long tmp2;
__asm__ __volatile__("\
1: lwarx %0,0,%4\n\
andc %1,%0,%5\n\
or %1,%1,%6\n\
/* 0x200 == Extended encoding, bit 22 */ \
/* Bit 22 has to be 1 when _PAGE_USER is unset and _PAGE_RO is set */ \
rlwimi %1,%1,32-1,0x200\n /* get _PAGE_RO */ \
rlwinm %3,%1,32-2,0x200\n /* get _PAGE_USER */ \
andc %1,%1,%3\n\
stwcx. %1,0,%4\n\
bne- 1b"
: "=&r" (old), "=&r" (tmp), "=m" (*p), "=&r" (tmp2)
: "r" (p), "r" (clr), "r" (set), "m" (*p)
: "cc" );
#else /* CONFIG_PPC_8xx */
__asm__ __volatile__("\ __asm__ __volatile__("\
1: lwarx %0,0,%3\n\ 1: lwarx %0,0,%3\n\
andc %1,%0,%4\n\ andc %1,%0,%4\n\
...@@ -198,7 +180,6 @@ static inline unsigned long pte_update(pte_t *p, ...@@ -198,7 +180,6 @@ static inline unsigned long pte_update(pte_t *p,
: "=&r" (old), "=&r" (tmp), "=m" (*p) : "=&r" (old), "=&r" (tmp), "=m" (*p)
: "r" (p), "r" (clr), "r" (set), "m" (*p) : "r" (p), "r" (clr), "r" (set), "m" (*p)
: "cc" ); : "cc" );
#endif /* CONFIG_PPC_8xx */
#else /* PTE_ATOMIC_UPDATES */ #else /* PTE_ATOMIC_UPDATES */
unsigned long old = pte_val(*p); unsigned long old = pte_val(*p);
*p = __pte((old & ~clr) | set); *p = __pte((old & ~clr) | set);
......
arch/powerpc/include/asm/pgtable-ppc64.h
View file @ 08d183e3
...@@ -118,7 +118,7 @@ ...@@ -118,7 +118,7 @@
*/ */
#ifndef __real_pte #ifndef __real_pte
#ifdef STRICT_MM_TYPECHECKS #ifdef CONFIG_STRICT_MM_TYPECHECKS
#define __real_pte(e,p) ((real_pte_t){(e)}) #define __real_pte(e,p) ((real_pte_t){(e)})
#define __rpte_to_pte(r) ((r).pte) #define __rpte_to_pte(r) ((r).pte)
#else #else
...@@ -347,11 +347,27 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) ...@@ -347,11 +347,27 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
/* Encode and de-code a swap entry */ /* Encode and de-code a swap entry */
#define __swp_type(entry) (((entry).val >> 1) & 0x3f) #define MAX_SWAPFILES_CHECK() do { \
#define __swp_offset(entry) ((entry).val >> 8) BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS); \
#define __swp_entry(type, offset) ((swp_entry_t){((type)<< 1)|((offset)<<8)}) /* \
#define __pte_to_swp_entry(pte) ((swp_entry_t){pte_val(pte) >> PTE_RPN_SHIFT}) * Don't have overlapping bits with _PAGE_HPTEFLAGS \
#define __swp_entry_to_pte(x) ((pte_t) { (x).val << PTE_RPN_SHIFT }) * We filter HPTEFLAGS on set_pte. \
*/ \
BUILD_BUG_ON(_PAGE_HPTEFLAGS & (0x1f << _PAGE_BIT_SWAP_TYPE)); \
} while (0)
/*
* on pte we don't need handle RADIX_TREE_EXCEPTIONAL_SHIFT;
*/
#define SWP_TYPE_BITS 5
#define __swp_type(x) (((x).val >> _PAGE_BIT_SWAP_TYPE) \
& ((1UL << SWP_TYPE_BITS) - 1))
#define __swp_offset(x) ((x).val >> PTE_RPN_SHIFT)
#define __swp_entry(type, offset) ((swp_entry_t) { \
((type) << _PAGE_BIT_SWAP_TYPE) \
| ((offset) << PTE_RPN_SHIFT) })
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val((pte)) })
#define __swp_entry_to_pte(x) __pte((x).val)
void pgtable_cache_add(unsigned shift, void (*ctor)(void *)); void pgtable_cache_add(unsigned shift, void (*ctor)(void *));
void pgtable_cache_init(void); void pgtable_cache_init(void);
......
arch/powerpc/include/asm/pnv-pci.h
View file @ 08d183e3
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
#define _ASM_PNV_PCI_H #define _ASM_PNV_PCI_H
#include <linux/pci.h> #include <linux/pci.h>
#include <misc/cxl.h> #include <misc/cxl-base.h>
int pnv_phb_to_cxl_mode(struct pci_dev *dev, uint64_t mode); int pnv_phb_to_cxl_mode(struct pci_dev *dev, uint64_t mode);
int pnv_cxl_ioda_msi_setup(struct pci_dev *dev, unsigned int hwirq, int pnv_cxl_ioda_msi_setup(struct pci_dev *dev, unsigned int hwirq,
......
arch/powerpc/include/asm/processor.h
View file @ 08d183e3
...@@ -295,6 +295,15 @@ struct thread_struct { ...@@ -295,6 +295,15 @@ struct thread_struct {
#endif #endif
#ifdef CONFIG_PPC64 #ifdef CONFIG_PPC64
unsigned long dscr; unsigned long dscr;
/*
* This member element dscr_inherit indicates that the process
* has explicitly attempted and changed the DSCR register value
* for itself. Hence kernel wont use the default CPU DSCR value
* contained in the PACA structure anymore during process context
* switch. Once this variable is set, this behaviour will also be
* inherited to all the children of this process from that point
* onwards.
*/
int dscr_inherit; int dscr_inherit;
unsigned long ppr; /* used to save/restore SMT priority */ unsigned long ppr; /* used to save/restore SMT priority */
#endif #endif
......
arch/powerpc/include/asm/pte-8xx.h
View file @ 08d183e3
...@@ -34,35 +34,32 @@ ...@@ -34,35 +34,32 @@
#define _PAGE_SPECIAL 0x0008 /* SW entry, forced to 0 by the TLB miss */ #define _PAGE_SPECIAL 0x0008 /* SW entry, forced to 0 by the TLB miss */
#define _PAGE_DIRTY 0x0100 /* C: page changed */ #define _PAGE_DIRTY 0x0100 /* C: page changed */
/* These 4 software bits must be masked out when the entry is loaded /* These 4 software bits must be masked out when the L2 entry is loaded
* into the TLB, 1 SW bit left(0x0080). * into the TLB.
*/ */
#define _PAGE_GUARDED 0x0010 /* software: guarded access */ #define _PAGE_GUARDED 0x0010 /* Copied to L1 G entry in DTLB */
#define _PAGE_ACCESSED 0x0020 /* software: page referenced */ #define _PAGE_USER 0x0020 /* Copied to L1 APG lsb */
#define _PAGE_WRITETHRU 0x0040 /* software: caching is write through */ #define _PAGE_EXEC 0x0040 /* Copied to L1 APG */
#define _PAGE_WRITETHRU 0x0080 /* software: caching is write through */
#define _PAGE_ACCESSED 0x0800 /* software: page referenced */
/* Setting any bits in the nibble with the follow two controls will #define _PAGE_RO 0x0600 /* Supervisor RO, User no access */
* require a TLB exception handler change. It is assumed unused bits
* are always zero.
*/
#define _PAGE_RO 0x0400 /* lsb PP bits */
#define _PAGE_USER 0x0800 /* msb PP bits */
/* set when _PAGE_USER is unset and _PAGE_RO is set */
#define _PAGE_KNLRO 0x0200
#define _PMD_PRESENT 0x0001 #define _PMD_PRESENT 0x0001
#define _PMD_BAD 0x0ff0 #define _PMD_BAD 0x0ff0
#define _PMD_PAGE_MASK 0x000c #define _PMD_PAGE_MASK 0x000c
#define _PMD_PAGE_8M 0x000c #define _PMD_PAGE_8M 0x000c
#define _PTE_NONE_MASK _PAGE_KNLRO
/* Until my rework is finished, 8xx still needs atomic PTE updates */ /* Until my rework is finished, 8xx still needs atomic PTE updates */
#define PTE_ATOMIC_UPDATES 1 #define PTE_ATOMIC_UPDATES 1
/* We need to add _PAGE_SHARED to kernel pages */ /* We need to add _PAGE_SHARED to kernel pages */
#define _PAGE_KERNEL_RO (_PAGE_SHARED | _PAGE_RO | _PAGE_KNLRO) #define _PAGE_KERNEL_RO (_PAGE_SHARED | _PAGE_RO)
#define _PAGE_KERNEL_ROX (_PAGE_EXEC | _PAGE_RO | _PAGE_KNLRO) #define _PAGE_KERNEL_ROX (_PAGE_SHARED | _PAGE_RO | _PAGE_EXEC)
#define _PAGE_KERNEL_RW (_PAGE_SHARED | _PAGE_DIRTY | _PAGE_RW | \
_PAGE_HWWRITE)
#define _PAGE_KERNEL_RWX (_PAGE_SHARED | _PAGE_DIRTY | _PAGE_RW | \
_PAGE_HWWRITE | _PAGE_EXEC)
#endif /* __KERNEL__ */ #endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PTE_8xx_H */ #endif /* _ASM_POWERPC_PTE_8xx_H */
arch/powerpc/include/asm/pte-book3e.h
View file @ 08d183e3
...@@ -11,6 +11,7 @@ ...@@ -11,6 +11,7 @@
/* Architected bits */ /* Architected bits */
#define _PAGE_PRESENT 0x000001 /* software: pte contains a translation */ #define _PAGE_PRESENT 0x000001 /* software: pte contains a translation */
#define _PAGE_SW1 0x000002 #define _PAGE_SW1 0x000002
#define _PAGE_BIT_SWAP_TYPE 2
#define _PAGE_BAP_SR 0x000004 #define _PAGE_BAP_SR 0x000004
#define _PAGE_BAP_UR 0x000008 #define _PAGE_BAP_UR 0x000008
#define _PAGE_BAP_SW 0x000010 #define _PAGE_BAP_SW 0x000010
......
arch/powerpc/include/asm/pte-common.h
View file @ 08d183e3
...@@ -85,10 +85,8 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void); ...@@ -85,10 +85,8 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
* 64-bit PTEs * 64-bit PTEs
*/ */
#if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT) #if defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
#define PTE_RPN_MAX (1ULL << (64 - PTE_RPN_SHIFT))
#define PTE_RPN_MASK (~((1ULL<<PTE_RPN_SHIFT)-1)) #define PTE_RPN_MASK (~((1ULL<<PTE_RPN_SHIFT)-1))
#else #else
#define PTE_RPN_MAX (1UL << (32 - PTE_RPN_SHIFT))
#define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1)) #define PTE_RPN_MASK (~((1UL<<PTE_RPN_SHIFT)-1))
#endif #endif
......
arch/powerpc/include/asm/pte-hash64.h
View file @ 08d183e3
...@@ -16,6 +16,7 @@ ...@@ -16,6 +16,7 @@
*/ */
#define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */ #define _PAGE_PRESENT 0x0001 /* software: pte contains a translation */
#define _PAGE_USER 0x0002 /* matches one of the PP bits */ #define _PAGE_USER 0x0002 /* matches one of the PP bits */
#define _PAGE_BIT_SWAP_TYPE 2
#define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */ #define _PAGE_EXEC 0x0004 /* No execute on POWER4 and newer (we invert) */
#define _PAGE_GUARDED 0x0008 #define _PAGE_GUARDED 0x0008
/* We can derive Memory coherence from _PAGE_NO_CACHE */ /* We can derive Memory coherence from _PAGE_NO_CACHE */
......
arch/powerpc/include/asm/systbl.h
View file @ 08d183e3
...@@ -358,7 +358,7 @@ SYSCALL_SPU(setns) ...@@ -358,7 +358,7 @@ SYSCALL_SPU(setns)
COMPAT_SYS(process_vm_readv) COMPAT_SYS(process_vm_readv)
COMPAT_SYS(process_vm_writev) COMPAT_SYS(process_vm_writev)
SYSCALL(finit_module) SYSCALL(finit_module)
SYSCALL(ni_syscall) /* sys_kcmp */ SYSCALL(kcmp) /* sys_kcmp */
SYSCALL_SPU(sched_setattr) SYSCALL_SPU(sched_setattr)
SYSCALL_SPU(sched_getattr) SYSCALL_SPU(sched_getattr)
SYSCALL_SPU(renameat2) SYSCALL_SPU(renameat2)
......
arch/powerpc/include/asm/trace.h
View file @ 08d183e3
...@@ -144,6 +144,26 @@ TRACE_EVENT_FN(opal_exit, ...@@ -144,6 +144,26 @@ TRACE_EVENT_FN(opal_exit,
); );
#endif #endif
TRACE_EVENT(hash_fault,
TP_PROTO(unsigned long addr, unsigned long access, unsigned long trap),
TP_ARGS(addr, access, trap),
TP_STRUCT__entry(
__field(unsigned long, addr)
__field(unsigned long, access)
__field(unsigned long, trap)
),
TP_fast_assign(
__entry->addr = addr;
__entry->access = access;
__entry->trap = trap;
),
TP_printk("hash fault with addr 0x%lx and access = 0x%lx trap = 0x%lx",
__entry->addr, __entry->access, __entry->trap)
);
#endif /* _TRACE_POWERPC_H */ #endif /* _TRACE_POWERPC_H */
#undef TRACE_INCLUDE_PATH #undef TRACE_INCLUDE_PATH
......
arch/powerpc/include/asm/uaccess.h
View file @ 08d183e3
...@@ -265,7 +265,7 @@ do { \ ...@@ -265,7 +265,7 @@ do { \
({ \ ({ \
long __gu_err; \ long __gu_err; \
unsigned long __gu_val; \ unsigned long __gu_val; \
const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
__chk_user_ptr(ptr); \ __chk_user_ptr(ptr); \
if (!is_kernel_addr((unsigned long)__gu_addr)) \ if (!is_kernel_addr((unsigned long)__gu_addr)) \
might_fault(); \ might_fault(); \
...@@ -279,7 +279,7 @@ do { \ ...@@ -279,7 +279,7 @@ do { \
({ \ ({ \
long __gu_err; \ long __gu_err; \
long long __gu_val; \ long long __gu_val; \
const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
__chk_user_ptr(ptr); \ __chk_user_ptr(ptr); \
if (!is_kernel_addr((unsigned long)__gu_addr)) \ if (!is_kernel_addr((unsigned long)__gu_addr)) \
might_fault(); \ might_fault(); \
...@@ -293,7 +293,7 @@ do { \ ...@@ -293,7 +293,7 @@ do { \
({ \ ({ \
long __gu_err = -EFAULT; \ long __gu_err = -EFAULT; \
unsigned long __gu_val = 0; \ unsigned long __gu_val = 0; \
const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
might_fault(); \ might_fault(); \
if (access_ok(VERIFY_READ, __gu_addr, (size))) \ if (access_ok(VERIFY_READ, __gu_addr, (size))) \
__get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
...@@ -305,7 +305,7 @@ do { \ ...@@ -305,7 +305,7 @@ do { \
({ \ ({ \
long __gu_err; \ long __gu_err; \
unsigned long __gu_val; \ unsigned long __gu_val; \
const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
__chk_user_ptr(ptr); \ __chk_user_ptr(ptr); \
__get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
(x) = (__force __typeof__(*(ptr)))__gu_val; \ (x) = (__force __typeof__(*(ptr)))__gu_val; \
......
arch/powerpc/include/uapi/asm/Kbuild
View file @ 08d183e3
...@@ -18,6 +18,7 @@ header-y += kvm_para.h ...@@ -18,6 +18,7 @@ header-y += kvm_para.h
header-y += mman.h header-y += mman.h
header-y += msgbuf.h header-y += msgbuf.h
header-y += nvram.h header-y += nvram.h
header-y += opal-prd.h
header-y += param.h header-y += param.h
header-y += perf_event.h header-y += perf_event.h
header-y += poll.h header-y += poll.h
......
arch/powerpc/include/uapi/asm/cputable.h
View file @ 08d183e3
...@@ -42,5 +42,6 @@ ...@@ -42,5 +42,6 @@
#define PPC_FEATURE2_ISEL 0x08000000 #define PPC_FEATURE2_ISEL 0x08000000
#define PPC_FEATURE2_TAR 0x04000000 #define PPC_FEATURE2_TAR 0x04000000
#define PPC_FEATURE2_VEC_CRYPTO 0x02000000 #define PPC_FEATURE2_VEC_CRYPTO 0x02000000
#define PPC_FEATURE2_HTM_NOSC 0x01000000
#endif /* _UAPI__ASM_POWERPC_CPUTABLE_H */ #endif /* _UAPI__ASM_POWERPC_CPUTABLE_H */
arch/powerpc/include/uapi/asm/eeh.h 0 → 100644
View file @ 08d183e3
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* Copyright IBM Corp. 2015
*
* Authors: Gavin Shan <gwshan@linux.vnet.ibm.com>
*/
#ifndef _ASM_POWERPC_EEH_H
#define _ASM_POWERPC_EEH_H
/* PE states */
#define EEH_PE_STATE_NORMAL 0 /* Normal state */
#define EEH_PE_STATE_RESET 1 /* PE reset asserted */
#define EEH_PE_STATE_STOPPED_IO_DMA 2 /* Frozen PE */
#define EEH_PE_STATE_STOPPED_DMA 4 /* Stopped DMA only */
#define EEH_PE_STATE_UNAVAIL 5 /* Unavailable */
/* EEH error types and functions */
#define EEH_ERR_TYPE_32 0 /* 32-bits error */
#define EEH_ERR_TYPE_64 1 /* 64-bits error */
#define EEH_ERR_FUNC_MIN 0
#define EEH_ERR_FUNC_LD_MEM_ADDR 0 /* Memory load */
#define EEH_ERR_FUNC_LD_MEM_DATA 1
#define EEH_ERR_FUNC_LD_IO_ADDR 2 /* IO load */
#define EEH_ERR_FUNC_LD_IO_DATA 3
#define EEH_ERR_FUNC_LD_CFG_ADDR 4 /* Config load */
#define EEH_ERR_FUNC_LD_CFG_DATA 5
#define EEH_ERR_FUNC_ST_MEM_ADDR 6 /* Memory store */
#define EEH_ERR_FUNC_ST_MEM_DATA 7
#define EEH_ERR_FUNC_ST_IO_ADDR 8 /* IO store */
#define EEH_ERR_FUNC_ST_IO_DATA 9
#define EEH_ERR_FUNC_ST_CFG_ADDR 10 /* Config store */
#define EEH_ERR_FUNC_ST_CFG_DATA 11
#define EEH_ERR_FUNC_DMA_RD_ADDR 12 /* DMA read */
#define EEH_ERR_FUNC_DMA_RD_DATA 13
#define EEH_ERR_FUNC_DMA_RD_MASTER 14
#define EEH_ERR_FUNC_DMA_RD_TARGET 15
#define EEH_ERR_FUNC_DMA_WR_ADDR 16 /* DMA write */
#define EEH_ERR_FUNC_DMA_WR_DATA 17
#define EEH_ERR_FUNC_DMA_WR_MASTER 18
#define EEH_ERR_FUNC_DMA_WR_TARGET 19
#define EEH_ERR_FUNC_MAX 19
#endif /* _ASM_POWERPC_EEH_H */
arch/powerpc/include/uapi/asm/opal-prd.h 0 → 100644
View file @ 08d183e3
/*
* OPAL Runtime Diagnostics interface driver
* Supported on POWERNV platform
*
* (C) Copyright IBM 2015
*
* Author: Vaidyanathan Srinivasan <svaidy at linux.vnet.ibm.com>
* Author: Jeremy Kerr <jk@ozlabs.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _UAPI_ASM_POWERPC_OPAL_PRD_H_
#define _UAPI_ASM_POWERPC_OPAL_PRD_H_
#include <linux/types.h>
/**
* The version of the kernel interface of the PRD system. This describes the
* interface available for the /dev/opal-prd device. The actual PRD message
* layout and content is private to the firmware <--> userspace interface, so
* is not covered by this versioning.
*
* Future interface versions are backwards-compatible; if a later kernel
* version is encountered, functionality provided in earlier versions
* will work.
*/
#define OPAL_PRD_KERNEL_VERSION 1
#define OPAL_PRD_GET_INFO _IOR('o', 0x01, struct opal_prd_info)
#define OPAL_PRD_SCOM_READ _IOR('o', 0x02, struct opal_prd_scom)
#define OPAL_PRD_SCOM_WRITE _IOW('o', 0x03, struct opal_prd_scom)
#ifndef __ASSEMBLY__
struct opal_prd_info {
__u64 version;
__u64 reserved[3];
};
struct opal_prd_scom {
__u64 chip;
__u64 addr;
__u64 data;
__s64 rc;
};
#endif /* __ASSEMBLY__ */
#endif /* _UAPI_ASM_POWERPC_OPAL_PRD_H */
arch/powerpc/include/uapi/asm/tm.h
View file @ 08d183e3
...@@ -11,7 +11,7 @@ ...@@ -11,7 +11,7 @@
#define TM_CAUSE_RESCHED 0xde #define TM_CAUSE_RESCHED 0xde
#define TM_CAUSE_TLBI 0xdc #define TM_CAUSE_TLBI 0xdc
#define TM_CAUSE_FAC_UNAV 0xda #define TM_CAUSE_FAC_UNAV 0xda
#define TM_CAUSE_SYSCALL 0xd8 /* future use */ #define TM_CAUSE_SYSCALL 0xd8
#define TM_CAUSE_MISC 0xd6 /* future use */ #define TM_CAUSE_MISC 0xd6 /* future use */
#define TM_CAUSE_SIGNAL 0xd4 #define TM_CAUSE_SIGNAL 0xd4
#define TM_CAUSE_ALIGNMENT 0xd2 #define TM_CAUSE_ALIGNMENT 0xd2
......
arch/powerpc/kernel/Makefile
View file @ 08d183e3
...@@ -33,11 +33,12 @@ obj-y := cputable.o ptrace.o syscalls.o \ ...@@ -33,11 +33,12 @@ obj-y := cputable.o ptrace.o syscalls.o \
signal.o sysfs.o cacheinfo.o time.o \ signal.o sysfs.o cacheinfo.o time.o \
prom.o traps.o setup-common.o \ prom.o traps.o setup-common.o \
udbg.o misc.o io.o dma.o \ udbg.o misc.o io.o dma.o \
misc_$(CONFIG_WORD_SIZE).o vdso32/ \ misc_$(CONFIG_WORD_SIZE).o \
of_platform.o prom_parse.o of_platform.o prom_parse.o
obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
signal_64.o ptrace32.o \ signal_64.o ptrace32.o \
paca.o nvram_64.o firmware.o paca.o nvram_64.o firmware.o
obj-$(CONFIG_VDSO32) += vdso32/
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o
......
arch/powerpc/kernel/asm-offsets.c
View file @ 08d183e3
...@@ -247,7 +247,7 @@ int main(void) ...@@ -247,7 +247,7 @@ int main(void)
#endif #endif
DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id)); DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state)); DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state));
DEFINE(PACA_DSCR, offsetof(struct paca_struct, dscr_default)); DEFINE(PACA_DSCR_DEFAULT, offsetof(struct paca_struct, dscr_default));
DEFINE(PACA_STARTTIME, offsetof(struct paca_struct, starttime)); DEFINE(PACA_STARTTIME, offsetof(struct paca_struct, starttime));
DEFINE(PACA_STARTTIME_USER, offsetof(struct paca_struct, starttime_user)); DEFINE(PACA_STARTTIME_USER, offsetof(struct paca_struct, starttime_user));
DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time)); DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
......
arch/powerpc/kernel/cputable.c
View file @ 08d183e3
...@@ -108,7 +108,9 @@ extern void __restore_cpu_e6500(void); ...@@ -108,7 +108,9 @@ extern void __restore_cpu_e6500(void);
PPC_FEATURE_TRUE_LE | \ PPC_FEATURE_TRUE_LE | \
PPC_FEATURE_PSERIES_PERFMON_COMPAT) PPC_FEATURE_PSERIES_PERFMON_COMPAT)
#define COMMON_USER2_POWER8 (PPC_FEATURE2_ARCH_2_07 | \ #define COMMON_USER2_POWER8 (PPC_FEATURE2_ARCH_2_07 | \
PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_DSCR | \ PPC_FEATURE2_HTM_COMP | \
PPC_FEATURE2_HTM_NOSC_COMP | \
PPC_FEATURE2_DSCR | \
PPC_FEATURE2_ISEL | PPC_FEATURE2_TAR | \ PPC_FEATURE2_ISEL | PPC_FEATURE2_TAR | \
PPC_FEATURE2_VEC_CRYPTO) PPC_FEATURE2_VEC_CRYPTO)
#define COMMON_USER_PA6T (COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\ #define COMMON_USER_PA6T (COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\
......
arch/powerpc/kernel/dma.c
View file @ 08d183e3
...@@ -248,6 +248,14 @@ int dma_set_mask(struct device *dev, u64 dma_mask) ...@@ -248,6 +248,14 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
{ {
if (ppc_md.dma_set_mask) if (ppc_md.dma_set_mask)
return ppc_md.dma_set_mask(dev, dma_mask); return ppc_md.dma_set_mask(dev, dma_mask);
if (dev_is_pci(dev)) {
struct pci_dev *pdev = to_pci_dev(dev);
struct pci_controller *phb = pci_bus_to_host(pdev->bus);
if (phb->controller_ops.dma_set_mask)
return phb->controller_ops.dma_set_mask(pdev, dma_mask);
}
return __dma_set_mask(dev, dma_mask); return __dma_set_mask(dev, dma_mask);
} }
EXPORT_SYMBOL(dma_set_mask); EXPORT_SYMBOL(dma_set_mask);
......
arch/powerpc/kernel/eeh.c
View file @ 08d183e3
...@@ -144,8 +144,6 @@ struct eeh_stats { ...@@ -144,8 +144,6 @@ struct eeh_stats {
static struct eeh_stats eeh_stats; static struct eeh_stats eeh_stats;
#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE)
static int __init eeh_setup(char *str) static int __init eeh_setup(char *str)
{ {
if (!strcmp(str, "off")) if (!strcmp(str, "off"))
...@@ -719,7 +717,7 @@ static void *eeh_restore_dev_state(void *data, void *userdata) ...@@ -719,7 +717,7 @@ static void *eeh_restore_dev_state(void *data, void *userdata)
/* The caller should restore state for the specified device */ /* The caller should restore state for the specified device */
if (pdev != dev) if (pdev != dev)
pci_save_state(pdev); pci_restore_state(pdev);
return NULL; return NULL;
} }
...@@ -1412,13 +1410,11 @@ static int dev_has_iommu_table(struct device *dev, void *data) ...@@ -1412,13 +1410,11 @@ static int dev_has_iommu_table(struct device *dev, void *data)
{ {
struct pci_dev *pdev = to_pci_dev(dev); struct pci_dev *pdev = to_pci_dev(dev);
struct pci_dev **ppdev = data; struct pci_dev **ppdev = data;
struct iommu_table *tbl;
if (!dev) if (!dev)
return 0; return 0;
tbl = get_iommu_table_base(dev); if (dev->iommu_group) {
if (tbl && tbl->it_group) {
*ppdev = pdev; *ppdev = pdev;
return 1; return 1;
} }
...@@ -1647,6 +1643,41 @@ int eeh_pe_configure(struct eeh_pe *pe) ...@@ -1647,6 +1643,41 @@ int eeh_pe_configure(struct eeh_pe *pe)
} }
EXPORT_SYMBOL_GPL(eeh_pe_configure); EXPORT_SYMBOL_GPL(eeh_pe_configure);
/**
* eeh_pe_inject_err - Injecting the specified PCI error to the indicated PE
* @pe: the indicated PE
* @type: error type
* @function: error function
* @addr: address
* @mask: address mask
*
* The routine is called to inject the specified PCI error, which
* is determined by @type and @function, to the indicated PE for
* testing purpose.
*/
int eeh_pe_inject_err(struct eeh_pe *pe, int type, int func,
unsigned long addr, unsigned long mask)
{
/* Invalid PE ? */
if (!pe)
return -ENODEV;
/* Unsupported operation ? */
if (!eeh_ops || !eeh_ops->err_inject)
return -ENOENT;
/* Check on PCI error type */
if (type != EEH_ERR_TYPE_32 && type != EEH_ERR_TYPE_64)
return -EINVAL;
/* Check on PCI error function */
if (func < EEH_ERR_FUNC_MIN || func > EEH_ERR_FUNC_MAX)
return -EINVAL;
return eeh_ops->err_inject(pe, type, func, addr, mask);
}
EXPORT_SYMBOL_GPL(eeh_pe_inject_err);
static int proc_eeh_show(struct seq_file *m, void *v) static int proc_eeh_show(struct seq_file *m, void *v)
{ {
if (!eeh_enabled()) { if (!eeh_enabled()) {
......
arch/powerpc/kernel/eeh_cache.c
View file @ 08d183e3
...@@ -48,11 +48,11 @@ ...@@ -48,11 +48,11 @@
*/ */
struct pci_io_addr_range { struct pci_io_addr_range {
struct rb_node rb_node; struct rb_node rb_node;
unsigned long addr_lo; resource_size_t addr_lo;
unsigned long addr_hi; resource_size_t addr_hi;
struct eeh_dev *edev; struct eeh_dev *edev;
struct pci_dev *pcidev; struct pci_dev *pcidev;
unsigned int flags; unsigned long flags;
}; };
static struct pci_io_addr_cache { static struct pci_io_addr_cache {
...@@ -125,8 +125,8 @@ static void eeh_addr_cache_print(struct pci_io_addr_cache *cache) ...@@ -125,8 +125,8 @@ static void eeh_addr_cache_print(struct pci_io_addr_cache *cache)
/* Insert address range into the rb tree. */ /* Insert address range into the rb tree. */
static struct pci_io_addr_range * static struct pci_io_addr_range *
eeh_addr_cache_insert(struct pci_dev *dev, unsigned long alo, eeh_addr_cache_insert(struct pci_dev *dev, resource_size_t alo,
unsigned long ahi, unsigned int flags) resource_size_t ahi, unsigned long flags)
{ {
struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node; struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node;
struct rb_node *parent = NULL; struct rb_node *parent = NULL;
...@@ -197,9 +197,9 @@ static void __eeh_addr_cache_insert_dev(struct pci_dev *dev) ...@@ -197,9 +197,9 @@ static void __eeh_addr_cache_insert_dev(struct pci_dev *dev)
/* Walk resources on this device, poke them into the tree */ /* Walk resources on this device, poke them into the tree */
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
unsigned long start = pci_resource_start(dev,i); resource_size_t start = pci_resource_start(dev,i);
unsigned long end = pci_resource_end(dev,i); resource_size_t end = pci_resource_end(dev,i);
unsigned int flags = pci_resource_flags(dev,i); unsigned long flags = pci_resource_flags(dev,i);
/* We are interested only bus addresses, not dma or other stuff */ /* We are interested only bus addresses, not dma or other stuff */
if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM))) if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM)))
......
arch/powerpc/kernel/eeh_driver.c
View file @ 08d183e3
...@@ -660,7 +660,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe) ...@@ -660,7 +660,7 @@ static void eeh_handle_normal_event(struct eeh_pe *pe)
eeh_pe_dev_traverse(pe, eeh_report_error, &result); eeh_pe_dev_traverse(pe, eeh_report_error, &result);
/* Get the current PCI slot state. This can take a long time, /* Get the current PCI slot state. This can take a long time,
* sometimes over 3 seconds for certain systems. * sometimes over 300 seconds for certain systems.
*/ */
rc = eeh_ops->wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000); rc = eeh_ops->wait_state(pe, MAX_WAIT_FOR_RECOVERY*1000);
if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) { if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) {
......
arch/powerpc/kernel/entry_64.S
View file @ 08d183e3
...@@ -34,6 +34,7 @@ ...@@ -34,6 +34,7 @@
#include <asm/ftrace.h> #include <asm/ftrace.h>
#include <asm/hw_irq.h> #include <asm/hw_irq.h>
#include <asm/context_tracking.h> #include <asm/context_tracking.h>
#include <asm/tm.h>
/* /*
* System calls. * System calls.
...@@ -51,6 +52,12 @@ exception_marker: ...@@ -51,6 +52,12 @@ exception_marker:
.globl system_call_common .globl system_call_common
system_call_common: system_call_common:
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
BEGIN_FTR_SECTION
extrdi. r10, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */
bne tabort_syscall
END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
andi. r10,r12,MSR_PR andi. r10,r12,MSR_PR
mr r10,r1 mr r10,r1
addi r1,r1,-INT_FRAME_SIZE addi r1,r1,-INT_FRAME_SIZE
...@@ -311,6 +318,34 @@ syscall_exit_work: ...@@ -311,6 +318,34 @@ syscall_exit_work:
bl do_syscall_trace_leave bl do_syscall_trace_leave
b ret_from_except b ret_from_except
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
tabort_syscall:
/* Firstly we need to enable TM in the kernel */
mfmsr r10
li r13, 1
rldimi r10, r13, MSR_TM_LG, 63-MSR_TM_LG
mtmsrd r10, 0
/* tabort, this dooms the transaction, nothing else */
li r13, (TM_CAUSE_SYSCALL|TM_CAUSE_PERSISTENT)
TABORT(R13)
/*
* Return directly to userspace. We have corrupted user register state,
* but userspace will never see that register state. Execution will
* resume after the tbegin of the aborted transaction with the
* checkpointed register state.
*/
li r13, MSR_RI
andc r10, r10, r13
mtmsrd r10, 1
mtspr SPRN_SRR0, r11
mtspr SPRN_SRR1, r12
rfid
b . /* prevent speculative execution */
#endif
/* Save non-volatile GPRs, if not already saved. */ /* Save non-volatile GPRs, if not already saved. */
_GLOBAL(save_nvgprs) _GLOBAL(save_nvgprs)
ld r11,_TRAP(r1) ld r11,_TRAP(r1)
...@@ -556,7 +591,7 @@ BEGIN_FTR_SECTION ...@@ -556,7 +591,7 @@ BEGIN_FTR_SECTION
ld r0,THREAD_DSCR(r4) ld r0,THREAD_DSCR(r4)
cmpwi r6,0 cmpwi r6,0
bne 1f bne 1f
ld r0,PACA_DSCR(r13) ld r0,PACA_DSCR_DEFAULT(r13)
1: 1:
BEGIN_FTR_SECTION_NESTED(70) BEGIN_FTR_SECTION_NESTED(70)
mfspr r8, SPRN_FSCR mfspr r8, SPRN_FSCR
......
arch/powerpc/kernel/exceptions-64s.S
View file @ 08d183e3
...@@ -59,14 +59,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \ ...@@ -59,14 +59,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \
#if defined(CONFIG_RELOCATABLE) #if defined(CONFIG_RELOCATABLE)
/* /*
* We can't branch directly; in the direct case we use LR * We can't branch directly so we do it via the CTR which
* and system_call_entry restores LR. (We thus need to move * is volatile across system calls.
* LR to r10 in the RFID case too.)
*/ */
#define SYSCALL_PSERIES_2_DIRECT \ #define SYSCALL_PSERIES_2_DIRECT \
mflr r10 ; \ mflr r10 ; \
ld r12,PACAKBASE(r13) ; \ ld r12,PACAKBASE(r13) ; \
LOAD_HANDLER(r12, system_call_entry_direct) ; \ LOAD_HANDLER(r12, system_call_entry) ; \
mtctr r12 ; \ mtctr r12 ; \
mfspr r12,SPRN_SRR1 ; \ mfspr r12,SPRN_SRR1 ; \
/* Re-use of r13... No spare regs to do this */ \ /* Re-use of r13... No spare regs to do this */ \
...@@ -80,7 +79,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \ ...@@ -80,7 +79,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) \
mfspr r12,SPRN_SRR1 ; \ mfspr r12,SPRN_SRR1 ; \
li r10,MSR_RI ; \ li r10,MSR_RI ; \
mtmsrd r10,1 ; /* Set RI (EE=0) */ \ mtmsrd r10,1 ; /* Set RI (EE=0) */ \
b system_call_entry_direct ; b system_call_common ;
#endif #endif
/* /*
...@@ -969,13 +968,6 @@ hv_facility_unavailable_relon_trampoline: ...@@ -969,13 +968,6 @@ hv_facility_unavailable_relon_trampoline:
__end_interrupts: __end_interrupts:
.align 7 .align 7
system_call_entry_direct:
#if defined(CONFIG_RELOCATABLE)
/* The first level prologue may have used LR to get here, saving
* orig in r10. To save hacking/ifdeffing common code, restore here.
*/
mtlr r10
#endif
system_call_entry: system_call_entry:
b system_call_common b system_call_common
......
arch/powerpc/kernel/head_8xx.S
View file @ 08d183e3
...@@ -48,6 +48,19 @@ ...@@ -48,6 +48,19 @@
mtspr spr, reg mtspr spr, reg
#endif #endif
/* Macro to test if an address is a kernel address */
#if CONFIG_TASK_SIZE <= 0x80000000 && CONFIG_PAGE_OFFSET >= 0x80000000
#define IS_KERNEL(tmp, addr) \
andis. tmp, addr, 0x8000 /* Address >= 0x80000000 */
#define BRANCH_UNLESS_KERNEL(label) beq label
#else
#define IS_KERNEL(tmp, addr) \
rlwinm tmp, addr, 16, 16, 31; \
cmpli cr0, tmp, PAGE_OFFSET >> 16
#define BRANCH_UNLESS_KERNEL(label) blt label
#endif
/* /*
* Value for the bits that have fixed value in RPN entries. * Value for the bits that have fixed value in RPN entries.
* Also used for tagging DAR for DTLBerror. * Also used for tagging DAR for DTLBerror.
...@@ -116,13 +129,13 @@ turn_on_mmu: ...@@ -116,13 +129,13 @@ turn_on_mmu:
*/ */
#define EXCEPTION_PROLOG \ #define EXCEPTION_PROLOG \
EXCEPTION_PROLOG_0; \ EXCEPTION_PROLOG_0; \
mfcr r10; \
EXCEPTION_PROLOG_1; \ EXCEPTION_PROLOG_1; \
EXCEPTION_PROLOG_2 EXCEPTION_PROLOG_2
#define EXCEPTION_PROLOG_0 \ #define EXCEPTION_PROLOG_0 \
mtspr SPRN_SPRG_SCRATCH0,r10; \ mtspr SPRN_SPRG_SCRATCH0,r10; \
mtspr SPRN_SPRG_SCRATCH1,r11; \ mtspr SPRN_SPRG_SCRATCH1,r11
mfcr r10
#define EXCEPTION_PROLOG_1 \ #define EXCEPTION_PROLOG_1 \
mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \ mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \
...@@ -162,7 +175,6 @@ turn_on_mmu: ...@@ -162,7 +175,6 @@ turn_on_mmu:
* Exception exit code. * Exception exit code.
*/ */
#define EXCEPTION_EPILOG_0 \ #define EXCEPTION_EPILOG_0 \
mtcr r10; \
mfspr r10,SPRN_SPRG_SCRATCH0; \ mfspr r10,SPRN_SPRG_SCRATCH0; \
mfspr r11,SPRN_SPRG_SCRATCH1 mfspr r11,SPRN_SPRG_SCRATCH1
...@@ -297,19 +309,22 @@ SystemCall: ...@@ -297,19 +309,22 @@ SystemCall:
* We have to use the MD_xxx registers for the tablewalk because the * We have to use the MD_xxx registers for the tablewalk because the
* equivalent MI_xxx registers only perform the attribute functions. * equivalent MI_xxx registers only perform the attribute functions.
*/ */
#ifdef CONFIG_8xx_CPU15
#define INVALIDATE_ADJACENT_PAGES_CPU15(tmp, addr) \
addi tmp, addr, PAGE_SIZE; \
tlbie tmp; \
addi tmp, addr, -PAGE_SIZE; \
tlbie tmp
#else
#define INVALIDATE_ADJACENT_PAGES_CPU15(tmp, addr)
#endif
InstructionTLBMiss: InstructionTLBMiss:
#ifdef CONFIG_8xx_CPU6 #ifdef CONFIG_8xx_CPU6
mtspr SPRN_DAR, r3 mtspr SPRN_SPRG_SCRATCH2, r3
#endif #endif
EXCEPTION_PROLOG_0 EXCEPTION_PROLOG_0
mtspr SPRN_SPRG_SCRATCH2, r10
mfspr r10, SPRN_SRR0 /* Get effective address of fault */
#ifdef CONFIG_8xx_CPU15
addi r11, r10, PAGE_SIZE
tlbie r11
addi r11, r10, -PAGE_SIZE
tlbie r11
#endif
/* If we are faulting a kernel address, we have to use the /* If we are faulting a kernel address, we have to use the
* kernel page tables. * kernel page tables.
...@@ -317,24 +332,34 @@ InstructionTLBMiss: ...@@ -317,24 +332,34 @@ InstructionTLBMiss:
#ifdef CONFIG_MODULES #ifdef CONFIG_MODULES
/* Only modules will cause ITLB Misses as we always /* Only modules will cause ITLB Misses as we always
* pin the first 8MB of kernel memory */ * pin the first 8MB of kernel memory */
andis. r11, r10, 0x8000 /* Address >= 0x80000000 */ mfspr r11, SPRN_SRR0 /* Get effective address of fault */
#endif INVALIDATE_ADJACENT_PAGES_CPU15(r10, r11)
mfcr r10
IS_KERNEL(r11, r11)
mfspr r11, SPRN_M_TW /* Get level 1 table */ mfspr r11, SPRN_M_TW /* Get level 1 table */
#ifdef CONFIG_MODULES BRANCH_UNLESS_KERNEL(3f)
beq 3f
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3: 3:
mtcr r10
mfspr r10, SPRN_SRR0 /* Get effective address of fault */
#else
mfspr r10, SPRN_SRR0 /* Get effective address of fault */
INVALIDATE_ADJACENT_PAGES_CPU15(r11, r10)
mfspr r11, SPRN_M_TW /* Get level 1 table base address */
#endif #endif
/* Insert level 1 index */ /* Insert level 1 index */
rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29 rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */ lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */
/* Load the MI_TWC with the attributes for this "segment." */
MTSPR_CPU6(SPRN_MI_TWC, r11, r3) /* Set segment attributes */
rlwinm r11, r11,0,0,19 /* Extract page descriptor page address */
/* Extract level 2 index */ /* Extract level 2 index */
rlwinm r10, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29 rlwinm r10, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
lwzx r10, r10, r11 /* Get the pte */ rlwimi r10, r11, 0, 0, 32 - PAGE_SHIFT - 1 /* Add level 2 base */
lwz r10, 0(r10) /* Get the pte */
/* Insert the APG into the TWC from the Linux PTE. */
rlwimi r11, r10, 0, 25, 26
/* Load the MI_TWC with the attributes for this "segment." */
MTSPR_CPU6(SPRN_MI_TWC, r11, r3) /* Set segment attributes */
#ifdef CONFIG_SWAP #ifdef CONFIG_SWAP
rlwinm r11, r10, 32-5, _PAGE_PRESENT rlwinm r11, r10, 32-5, _PAGE_PRESENT
...@@ -343,40 +368,41 @@ InstructionTLBMiss: ...@@ -343,40 +368,41 @@ InstructionTLBMiss:
#endif #endif
li r11, RPN_PATTERN li r11, RPN_PATTERN
/* The Linux PTE won't go exactly into the MMU TLB. /* The Linux PTE won't go exactly into the MMU TLB.
* Software indicator bits 21 and 28 must be clear. * Software indicator bits 20-23 and 28 must be clear.
* Software indicator bits 24, 25, 26, and 27 must be * Software indicator bits 24, 25, 26, and 27 must be
* set. All other Linux PTE bits control the behavior * set. All other Linux PTE bits control the behavior
* of the MMU. * of the MMU.
*/ */
rlwimi r10, r11, 0, 0x07f8 /* Set 24-27, clear 21-23,28 */ rlwimi r10, r11, 0, 0x0ff8 /* Set 24-27, clear 20-23,28 */
MTSPR_CPU6(SPRN_MI_RPN, r10, r3) /* Update TLB entry */ MTSPR_CPU6(SPRN_MI_RPN, r10, r3) /* Update TLB entry */
/* Restore registers */ /* Restore registers */
#ifdef CONFIG_8xx_CPU6 #ifdef CONFIG_8xx_CPU6
mfspr r3, SPRN_DAR mfspr r3, SPRN_SPRG_SCRATCH2
mtspr SPRN_DAR, r11 /* Tag DAR */
#endif #endif
mfspr r10, SPRN_SPRG_SCRATCH2
EXCEPTION_EPILOG_0 EXCEPTION_EPILOG_0
rfi rfi
. = 0x1200 . = 0x1200
DataStoreTLBMiss: DataStoreTLBMiss:
#ifdef CONFIG_8xx_CPU6 #ifdef CONFIG_8xx_CPU6
mtspr SPRN_DAR, r3 mtspr SPRN_SPRG_SCRATCH2, r3
#endif #endif
EXCEPTION_PROLOG_0 EXCEPTION_PROLOG_0
mtspr SPRN_SPRG_SCRATCH2, r10 mfcr r10
mfspr r10, SPRN_MD_EPN
/* If we are faulting a kernel address, we have to use the /* If we are faulting a kernel address, we have to use the
* kernel page tables. * kernel page tables.
*/ */
andis. r11, r10, 0x8000 mfspr r11, SPRN_MD_EPN
IS_KERNEL(r11, r11)
mfspr r11, SPRN_M_TW /* Get level 1 table */ mfspr r11, SPRN_M_TW /* Get level 1 table */
beq 3f BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
3: 3:
mtcr r10
mfspr r10, SPRN_MD_EPN
/* Insert level 1 index */ /* Insert level 1 index */
rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29 rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */ lwz r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11) /* Get the level 1 entry */
...@@ -388,13 +414,13 @@ DataStoreTLBMiss: ...@@ -388,13 +414,13 @@ DataStoreTLBMiss:
rlwimi r10, r11, 0, 0, 32 - PAGE_SHIFT - 1 /* Add level 2 base */ rlwimi r10, r11, 0, 0, 32 - PAGE_SHIFT - 1 /* Add level 2 base */
lwz r10, 0(r10) /* Get the pte */ lwz r10, 0(r10) /* Get the pte */
/* Insert the Guarded flag into the TWC from the Linux PTE. /* Insert the Guarded flag and APG into the TWC from the Linux PTE.
* It is bit 27 of both the Linux PTE and the TWC (at least * It is bit 26-27 of both the Linux PTE and the TWC (at least
* I got that right :-). It will be better when we can put * I got that right :-). It will be better when we can put
* this into the Linux pgd/pmd and load it in the operation * this into the Linux pgd/pmd and load it in the operation
* above. * above.
*/ */
rlwimi r11, r10, 0, 27, 27 rlwimi r11, r10, 0, 26, 27
/* Insert the WriteThru flag into the TWC from the Linux PTE. /* Insert the WriteThru flag into the TWC from the Linux PTE.
* It is bit 25 in the Linux PTE and bit 30 in the TWC * It is bit 25 in the Linux PTE and bit 30 in the TWC
*/ */
...@@ -423,14 +449,14 @@ DataStoreTLBMiss: ...@@ -423,14 +449,14 @@ DataStoreTLBMiss:
*/ */
li r11, RPN_PATTERN li r11, RPN_PATTERN
rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */ rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */
rlwimi r10, r11, 0, 20, 20 /* clear 20 */
MTSPR_CPU6(SPRN_MD_RPN, r10, r3) /* Update TLB entry */ MTSPR_CPU6(SPRN_MD_RPN, r10, r3) /* Update TLB entry */
/* Restore registers */ /* Restore registers */
#ifdef CONFIG_8xx_CPU6 #ifdef CONFIG_8xx_CPU6
mfspr r3, SPRN_DAR mfspr r3, SPRN_SPRG_SCRATCH2
#endif #endif
mtspr SPRN_DAR, r11 /* Tag DAR */ mtspr SPRN_DAR, r11 /* Tag DAR */
mfspr r10, SPRN_SPRG_SCRATCH2
EXCEPTION_EPILOG_0 EXCEPTION_EPILOG_0
rfi rfi
...@@ -456,6 +482,7 @@ InstructionTLBError: ...@@ -456,6 +482,7 @@ InstructionTLBError:
. = 0x1400 . = 0x1400
DataTLBError: DataTLBError:
EXCEPTION_PROLOG_0 EXCEPTION_PROLOG_0
mfcr r10
mfspr r11, SPRN_DAR mfspr r11, SPRN_DAR
cmpwi cr0, r11, RPN_PATTERN cmpwi cr0, r11, RPN_PATTERN
...@@ -503,9 +530,9 @@ FixupDAR:/* Entry point for dcbx workaround. */ ...@@ -503,9 +530,9 @@ FixupDAR:/* Entry point for dcbx workaround. */
mtspr SPRN_SPRG_SCRATCH2, r10 mtspr SPRN_SPRG_SCRATCH2, r10
/* fetch instruction from memory. */ /* fetch instruction from memory. */
mfspr r10, SPRN_SRR0 mfspr r10, SPRN_SRR0
andis. r11, r10, 0x8000 /* Address >= 0x80000000 */ IS_KERNEL(r11, r10)
mfspr r11, SPRN_M_TW /* Get level 1 table */ mfspr r11, SPRN_M_TW /* Get level 1 table */
beq 3f BRANCH_UNLESS_KERNEL(3f)
lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha lis r11, (swapper_pg_dir-PAGE_OFFSET)@ha
/* Insert level 1 index */ /* Insert level 1 index */
3: rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29 3: rlwimi r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
...@@ -743,15 +770,20 @@ initial_mmu: ...@@ -743,15 +770,20 @@ initial_mmu:
ori r8, r8, MI_EVALID /* Mark it valid */ ori r8, r8, MI_EVALID /* Mark it valid */
mtspr SPRN_MI_EPN, r8 mtspr SPRN_MI_EPN, r8
mtspr SPRN_MD_EPN, r8 mtspr SPRN_MD_EPN, r8
li r8, MI_PS8MEG /* Set 8M byte page */ li r8, MI_PS8MEG | (2 << 5) /* Set 8M byte page, APG 2 */
ori r8, r8, MI_SVALID /* Make it valid */ ori r8, r8, MI_SVALID /* Make it valid */
mtspr SPRN_MI_TWC, r8 mtspr SPRN_MI_TWC, r8
li r8, MI_PS8MEG /* Set 8M byte page, APG 0 */
ori r8, r8, MI_SVALID /* Make it valid */
mtspr SPRN_MD_TWC, r8 mtspr SPRN_MD_TWC, r8
li r8, MI_BOOTINIT /* Create RPN for address 0 */ li r8, MI_BOOTINIT /* Create RPN for address 0 */
mtspr SPRN_MI_RPN, r8 /* Store TLB entry */ mtspr SPRN_MI_RPN, r8 /* Store TLB entry */
mtspr SPRN_MD_RPN, r8 mtspr SPRN_MD_RPN, r8
lis r8, MI_Kp@h /* Set the protection mode */ lis r8, MI_APG_INIT@h /* Set protection modes */
ori r8, r8, MI_APG_INIT@l
mtspr SPRN_MI_AP, r8 mtspr SPRN_MI_AP, r8
lis r8, MD_APG_INIT@h
ori r8, r8, MD_APG_INIT@l
mtspr SPRN_MD_AP, r8 mtspr SPRN_MD_AP, r8
/* Map another 8 MByte at the IMMR to get the processor /* Map another 8 MByte at the IMMR to get the processor
......
arch/powerpc/kernel/idle_e500.S
View file @ 08d183e3
...@@ -58,15 +58,6 @@ BEGIN_FTR_SECTION ...@@ -58,15 +58,6 @@ BEGIN_FTR_SECTION
mtlr r0 mtlr r0
lis r3,HID0_NAP@h lis r3,HID0_NAP@h
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP) END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
BEGIN_FTR_SECTION
msync
li r7,L2CSR0_L2FL@l
mtspr SPRN_L2CSR0,r7
2:
mfspr r7,SPRN_L2CSR0
andi. r4,r7,L2CSR0_L2FL@l
bne 2b
END_FTR_SECTION_IFSET(CPU_FTR_L2CSR|CPU_FTR_CAN_NAP)
1: 1:
/* Go to NAP or DOZE now */ /* Go to NAP or DOZE now */
mfspr r4,SPRN_HID0 mfspr r4,SPRN_HID0
......
arch/powerpc/kernel/iommu.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/kernel/msi.c
View file @ 08d183e3
...@@ -15,7 +15,10 @@ ...@@ -15,7 +15,10 @@
int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{ {
if (!ppc_md.setup_msi_irqs || !ppc_md.teardown_msi_irqs) { struct pci_controller *phb = pci_bus_to_host(dev->bus);
if (!phb->controller_ops.setup_msi_irqs ||
!phb->controller_ops.teardown_msi_irqs) {
pr_debug("msi: Platform doesn't provide MSI callbacks.\n"); pr_debug("msi: Platform doesn't provide MSI callbacks.\n");
return -ENOSYS; return -ENOSYS;
} }
...@@ -24,10 +27,12 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) ...@@ -24,10 +27,12 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
if (type == PCI_CAP_ID_MSI && nvec > 1) if (type == PCI_CAP_ID_MSI && nvec > 1)
return 1; return 1;
return ppc_md.setup_msi_irqs(dev, nvec, type); return phb->controller_ops.setup_msi_irqs(dev, nvec, type);
} }
void arch_teardown_msi_irqs(struct pci_dev *dev) void arch_teardown_msi_irqs(struct pci_dev *dev)
{ {
ppc_md.teardown_msi_irqs(dev); struct pci_controller *phb = pci_bus_to_host(dev->bus);
phb->controller_ops.teardown_msi_irqs(dev);
} }
arch/powerpc/kernel/pci-common.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/kernel/pci-hotplug.c
View file @ 08d183e3
...@@ -29,7 +29,12 @@ ...@@ -29,7 +29,12 @@
*/ */
void pcibios_release_device(struct pci_dev *dev) void pcibios_release_device(struct pci_dev *dev)
{ {
struct pci_controller *phb = pci_bus_to_host(dev->bus);
eeh_remove_device(dev); eeh_remove_device(dev);
if (phb->controller_ops.release_device)
phb->controller_ops.release_device(dev);
} }
/** /**
......
arch/powerpc/kernel/process.c
View file @ 08d183e3
...@@ -1112,7 +1112,6 @@ static void setup_ksp_vsid(struct task_struct *p, unsigned long sp) ...@@ -1112,7 +1112,6 @@ static void setup_ksp_vsid(struct task_struct *p, unsigned long sp)
/* /*
* Copy a thread.. * Copy a thread..
*/ */
extern unsigned long dscr_default; /* defined in arch/powerpc/kernel/sysfs.c */
/* /*
* Copy architecture-specific thread state * Copy architecture-specific thread state
......
arch/powerpc/kernel/setup_64.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/kernel/sysfs.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/kernel/tm.S
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/kernel/traps.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/kernel/vdso.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/kernel/vio.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/kvm/book3s_hv_rmhandlers.S
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/lib/Makefile
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/mm/Makefile
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/mm/copro_fault.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/mm/hash_native_64.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/mm/hash_utils_64.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/mm/mem.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/mm/mmu_context_hash64.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/mm/mmu_context_iommu.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/mm/tlb_low_64e.S
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/perf/core-book3s.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/52xx/mpc52xx_gpt.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/85xx/Kconfig
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/85xx/smp.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/85xx/twr_p102x.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/Kconfig.cputype
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/cell/axon_msi.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/cell/iommu.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/pasemi/Makefile
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/pasemi/iommu.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/Kconfig
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/Makefile
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/idle.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/opal-async.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/opal-dump.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/opal-elog.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/opal-hmi.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/opal-irqchip.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/opal-prd.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/opal.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/pci-ioda.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/pci-p5ioc2.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/pci.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/pci.h
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/powernv.h
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/powernv/setup.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/pseries/dlpar.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/pseries/iommu.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/platforms/pseries/msi.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/Makefile
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/dart_iommu.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/fsl_msi.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/i8259.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/ipic.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/mpc8xx_pic.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/mpic.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/mpic.h
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/mpic_u3msi.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/mv64x60_pic.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/ppc4xx_hsta_msi.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/ppc4xx_msi.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/qe_lib/qe_ic.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/tsi108_pci.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/uic.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/xics/icp-native.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/xics/xics-common.c
View file @ 08d183e3
This diff is collapsed.
arch/powerpc/sysdev/xilinx_intc.c
View file @ 08d183e3
This diff is collapsed.
drivers/char/ipmi/ipmi_powernv.c
View file @ 08d183e3
This diff is collapsed.
drivers/macintosh/nvram.c deleted 100644 → 0
View file @ 4b1f2af6
This diff is collapsed.
drivers/misc/cxl/Kconfig
View file @ 08d183e3
This diff is collapsed.
drivers/misc/cxl/Makefile
View file @ 08d183e3
This diff is collapsed.
drivers/misc/cxl/api.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
drivers/misc/cxl/base.c
View file @ 08d183e3
This diff is collapsed.
drivers/misc/cxl/context.c
View file @ 08d183e3
This diff is collapsed.
drivers/misc/cxl/cxl.h
View file @ 08d183e3
This diff is collapsed.
drivers/misc/cxl/fault.c
View file @ 08d183e3
This diff is collapsed.
drivers/misc/cxl/file.c
View file @ 08d183e3
This diff is collapsed.
drivers/misc/cxl/irq.c
View file @ 08d183e3
This diff is collapsed.
drivers/misc/cxl/main.c
View file @ 08d183e3
This diff is collapsed.
drivers/misc/cxl/native.c
View file @ 08d183e3
This diff is collapsed.
drivers/misc/cxl/pci.c
View file @ 08d183e3
This diff is collapsed.
drivers/misc/cxl/sysfs.c
View file @ 08d183e3
This diff is collapsed.
drivers/misc/cxl/vphb.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
drivers/mtd/devices/Kconfig
View file @ 08d183e3
This diff is collapsed.
drivers/mtd/devices/Makefile
View file @ 08d183e3
This diff is collapsed.
drivers/mtd/devices/powernv_flash.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
drivers/tty/hvc/hvc_opal.c
View file @ 08d183e3
This diff is collapsed.
drivers/vfio/vfio_iommu_spapr_tce.c
View file @ 08d183e3
This diff is collapsed.
drivers/vfio/vfio_spapr_eeh.c
View file @ 08d183e3
This diff is collapsed.
include/misc/cxl-base.h 0 → 100644
View file @ 08d183e3
This diff is collapsed.
include/misc/cxl.h
View file @ 08d183e3
This diff is collapsed.
include/uapi/linux/vfio.h
View file @ 08d183e3
This diff is collapsed.
include/uapi/misc/cxl.h
View file @ 08d183e3
This diff is collapsed.
lib/raid6/Makefile
View file @ 08d183e3
This diff is collapsed.
tools/testing/selftests/powerpc/Makefile
View file @ 08d183e3
This diff is collapsed.
tools/testing/selftests/powerpc/dscr/.gitignore 0 → 100644
View file @ 08d183e3
This diff is collapsed.
tools/testing/selftests/powerpc/dscr/Makefile 0 → 100644
View file @ 08d183e3
This diff is collapsed.
tools/testing/selftests/powerpc/dscr/dscr.h 0 → 100644
View file @ 08d183e3
This diff is collapsed.
tools/testing/selftests/powerpc/dscr/dscr_default_test.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
tools/testing/selftests/powerpc/dscr/dscr_explicit_test.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
tools/testing/selftests/powerpc/dscr/dscr_inherit_exec_test.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
tools/testing/selftests/powerpc/dscr/dscr_inherit_test.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
tools/testing/selftests/powerpc/dscr/dscr_sysfs_test.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
tools/testing/selftests/powerpc/dscr/dscr_sysfs_thread_test.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
tools/testing/selftests/powerpc/dscr/dscr_user_test.c 0 → 100644
View file @ 08d183e3
This diff is collapsed.
tools/testing/selftests/powerpc/tm/Makefile
View file @ 08d183e3
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7