arm64: dts: qcom: pm8916: Sort nodes

Sort nodes by unit address so we have a consistent order in pm8916.dtsi.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200915071221.72895-14-stephan@gerhold.netSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/pm8916.dtsi

 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
-#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
 &spmi_bus {
@@ -12,13 +12,6 @@ pm8916_0: pmic@0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		rtc@6000 {
-			compatible = "qcom,pm8941-rtc";
-			reg = <0x6000>;
-			reg-names = "rtc", "alarm";
-			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
-		};
-
 		pon@800 {
 			compatible = "qcom,pm8916-pon";
 			reg = <0x800>;
@@ -48,28 +41,6 @@ watchdog {
 			};
 		};
 
-		pm8916_gpios: gpios@c000 {
-			compatible = "qcom,pm8916-gpio";
-			reg = <0xc000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
-				     <0 0xc1 0 IRQ_TYPE_NONE>,
-				     <0 0xc2 0 IRQ_TYPE_NONE>,
-				     <0 0xc3 0 IRQ_TYPE_NONE>;
-		};
-
-		pm8916_mpps: mpps@a000 {
-			compatible = "qcom,pm8916-mpp";
-			reg = <0xa000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
-				     <0 0xa1 0 IRQ_TYPE_NONE>,
-				     <0 0xa2 0 IRQ_TYPE_NONE>,
-				     <0 0xa3 0 IRQ_TYPE_NONE>;
-		};
-
 		pm8916_temp: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
@@ -111,6 +82,35 @@ adc-chan@f {
 				reg = <VADC_VDD_VADC>;
 			};
 		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pm8916_mpps: mpps@a000 {
+			compatible = "qcom,pm8916-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>;
+		};
+
+		pm8916_gpios: gpios@c000 {
+			compatible = "qcom,pm8916-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>;
+		};
 	};
 
 	pm8916_1: pmic@1 {