Commit 09a587a0 authored by Stephan Gerhold's avatar Stephan Gerhold Committed by Bjorn Andersson

arm64: dts: qcom: pm8916: Sort nodes

Sort nodes by unit address so we have a consistent order in pm8916.dtsi.
Signed-off-by: default avatarStephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200915071221.72895-14-stephan@gerhold.netSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 327c0f5f
// SPDX-License-Identifier: GPL-2.0 // SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h> #include <dt-bindings/spmi/spmi.h>
&spmi_bus { &spmi_bus {
...@@ -12,13 +12,6 @@ pm8916_0: pmic@0 { ...@@ -12,13 +12,6 @@ pm8916_0: pmic@0 {
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
pon@800 { pon@800 {
compatible = "qcom,pm8916-pon"; compatible = "qcom,pm8916-pon";
reg = <0x800>; reg = <0x800>;
...@@ -48,28 +41,6 @@ watchdog { ...@@ -48,28 +41,6 @@ watchdog {
}; };
}; };
pm8916_gpios: gpios@c000 {
compatible = "qcom,pm8916-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
<0 0xc1 0 IRQ_TYPE_NONE>,
<0 0xc2 0 IRQ_TYPE_NONE>,
<0 0xc3 0 IRQ_TYPE_NONE>;
};
pm8916_mpps: mpps@a000 {
compatible = "qcom,pm8916-mpp";
reg = <0xa000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
<0 0xa1 0 IRQ_TYPE_NONE>,
<0 0xa2 0 IRQ_TYPE_NONE>,
<0 0xa3 0 IRQ_TYPE_NONE>;
};
pm8916_temp: temp-alarm@2400 { pm8916_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm"; compatible = "qcom,spmi-temp-alarm";
reg = <0x2400>; reg = <0x2400>;
...@@ -111,6 +82,35 @@ adc-chan@f { ...@@ -111,6 +82,35 @@ adc-chan@f {
reg = <VADC_VDD_VADC>; reg = <VADC_VDD_VADC>;
}; };
}; };
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
pm8916_mpps: mpps@a000 {
compatible = "qcom,pm8916-mpp";
reg = <0xa000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
<0 0xa1 0 IRQ_TYPE_NONE>,
<0 0xa2 0 IRQ_TYPE_NONE>,
<0 0xa3 0 IRQ_TYPE_NONE>;
};
pm8916_gpios: gpios@c000 {
compatible = "qcom,pm8916-gpio";
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
<0 0xc1 0 IRQ_TYPE_NONE>,
<0 0xc2 0 IRQ_TYPE_NONE>,
<0 0xc3 0 IRQ_TYPE_NONE>;
};
}; };
pm8916_1: pmic@1 { pm8916_1: pmic@1 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment