Commit 0b1f1100 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by Florian Fainelli

ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few devices

This uses trigger-sources documented in commit 80dc6e1c ("dt-bindings:
leds: document new trigger-sources property") to specify USB ports. Such an
information can be used by operating system to setup LEDs behavior.

I updated dts files for 7 devices I own and I was able to test.
Signed-off-by: default avatarRafał Miłecki <rafal@milecki.pl>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
parent bbe526f5
...@@ -52,6 +52,10 @@ leds { ...@@ -52,6 +52,10 @@ leds {
usb { usb {
label = "bcm53xx:blue:usb"; label = "bcm53xx:blue:usb";
gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
<&xhci_port1>, <&ohci_port2>,
<&ehci_port2>;
linux,default-trigger = "usbport";
}; };
power0 { power0 {
......
...@@ -48,6 +48,9 @@ power1 { ...@@ -48,6 +48,9 @@ power1 {
usb { usb {
label = "bcm53xx:blue:usb"; label = "bcm53xx:blue:usb";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
<&xhci_port1>;
linux,default-trigger = "usbport";
}; };
wireless { wireless {
......
...@@ -42,16 +42,22 @@ power-amber { ...@@ -42,16 +42,22 @@ power-amber {
usb2 { usb2 {
label = "bcm53xx:white:usb2"; label = "bcm53xx:white:usb2";
gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port2>, <&ehci_port2>;
linux,default-trigger = "usbport";
}; };
usb3-white { usb3-white {
label = "bcm53xx:white:usb3"; label = "bcm53xx:white:usb3";
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
trigger-sources = <&xhci_port1>;
linux,default-trigger = "usbport";
}; };
usb3-green { usb3-green {
label = "bcm53xx:green:usb3"; label = "bcm53xx:green:usb3";
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
}; };
wps { wps {
......
...@@ -36,6 +36,8 @@ lan { ...@@ -36,6 +36,8 @@ lan {
usb2-port1 { usb2-port1 {
label = "bcm53xx:green:usb2-port1"; label = "bcm53xx:green:usb2-port1";
gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>;
linux,default-trigger = "usbport";
}; };
power { power {
...@@ -67,6 +69,8 @@ wan-amber { ...@@ -67,6 +69,8 @@ wan-amber {
usb2-port2 { usb2-port2 {
label = "bcm53xx:green:usb2-port2"; label = "bcm53xx:green:usb2-port2";
gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port2>, <&ehci_port2>;
linux,default-trigger = "usbport";
}; };
}; };
......
...@@ -46,11 +46,16 @@ wps { ...@@ -46,11 +46,16 @@ wps {
usb3 { usb3 {
label = "bcm53xx:blue:usb3"; label = "bcm53xx:blue:usb3";
gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
<&xhci_port1>;
linux,default-trigger = "usbport";
}; };
usb2 { usb2 {
label = "bcm53xx:blue:usb2"; label = "bcm53xx:blue:usb2";
gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
trigger-sources = <&ohci_port2>, <&ehci_port2>;
linux,default-trigger = "usbport";
}; };
wan-blue { wan-blue {
......
...@@ -71,6 +71,9 @@ wan-amber { ...@@ -71,6 +71,9 @@ wan-amber {
usb3-white { usb3-white {
label = "bcm53xx:white:usb3"; label = "bcm53xx:white:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
<&xhci_port1>;
linux,default-trigger = "usbport";
}; };
2ghz { 2ghz {
......
...@@ -59,6 +59,9 @@ lan2 { ...@@ -59,6 +59,9 @@ lan2 {
usb3 { usb3 {
label = "bcm53xx:green:usb3"; label = "bcm53xx:green:usb3";
gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
trigger-sources = <&ohci_port1>, <&ehci_port1>,
<&xhci_port1>;
linux,default-trigger = "usbport";
}; };
status { status {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment