igb: Move ITR related data into work container within the q_vector

This change moves information related to interrupt throttle rate
configuration into a separate q_vector sub-structure called a work
container. A similar change has already been made for ixgbe and this work
is based off of that.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown  <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/igb/e1000_defines.h

@@ -409,6 +409,9 @@
 #define E1000_ICS_DRSTA     E1000_ICR_DRSTA     /* Device Reset Aserted */
 
 /* Extended Interrupt Cause Set */
+/* E1000_EITR_CNT_IGNR is only for 82576 and newer */
+#define E1000_EITR_CNT_IGNR     0x80000000 /* Don't reset counters on write */
+
 
 /* Transmit Descriptor Control */
 /* Enable the counting of descriptors still to be processed. */

drivers/net/ethernet/intel/igb/igb.h

@@ -42,8 +42,11 @@
 
 struct igb_adapter;
 
-/* ((1000000000ns / (6000ints/s * 1024ns)) << 2 = 648 */
-#define IGB_START_ITR 648
+/* Interrupt defines */
+#define IGB_START_ITR                    648 /* ~6000 ints/sec */
+#define IGB_4K_ITR                       980
+#define IGB_20K_ITR                      196
+#define IGB_70K_ITR                       56
 
 /* TX/RX descriptor defines */
 #define IGB_DEFAULT_TXD                  256
@@ -175,16 +178,23 @@ struct igb_rx_queue_stats {
 	u64 alloc_failed;
 };
 
+struct igb_ring_container {
+	struct igb_ring *ring;		/* pointer to linked list of rings */
+	unsigned int total_bytes;	/* total bytes processed this int */
+	unsigned int total_packets;	/* total packets processed this int */
+	u16 work_limit;			/* total work allowed per interrupt */
+	u8 count;			/* total number of rings in vector */
+	u8 itr;				/* current ITR setting for ring */
+};
+
 struct igb_q_vector {
-	struct igb_adapter *adapter; /* backlink */
-	struct igb_ring *rx_ring;
-	struct igb_ring *tx_ring;
-	struct napi_struct napi;
+	struct igb_adapter *adapter;	/* backlink */
+	int cpu;			/* CPU for DCA */
+	u32 eims_value;			/* EIMS mask value */
 
-	u32 eims_value;
-	u16 cpu;
-	u16 tx_work_limit;
+	struct igb_ring_container rx, tx;
 
+	struct napi_struct napi;
 	int numa_node;
 
 	u16 itr_val;
@@ -215,9 +225,6 @@ struct igb_ring {
 	u16 next_to_clean ____cacheline_aligned_in_smp;
 	u16 next_to_use;
 
-	unsigned int total_bytes;
-	unsigned int total_packets;
-
 	union {
 		/* TX */
 		struct {

drivers/net/ethernet/intel/igb/igb_ethtool.c

@@ -2013,8 +2013,8 @@ static int igb_set_coalesce(struct net_device *netdev,
 
 	for (i = 0; i < adapter->num_q_vectors; i++) {
 		struct igb_q_vector *q_vector = adapter->q_vector[i];
-		q_vector->tx_work_limit = adapter->tx_work_limit;
-		if (q_vector->rx_ring)
+		q_vector->tx.work_limit = adapter->tx_work_limit;
+		if (q_vector->rx.ring)
 			q_vector->itr_val = adapter->rx_itr_setting;
 		else
 			q_vector->itr_val = adapter->tx_itr_setting;