Merge tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "DeviceTree updates for 3.13.  This is a bit larger pull request than
  usual for this cycle with lots of clean-up.

   - Cross arch clean-up and consolidation of early DT scanning code.
   - Clean-up and removal of arch prom.h headers.  Makes arch specific
     prom.h optional on all but Sparc.
   - Addition of interrupts-extended property for devices connected to
     multiple interrupt controllers.
   - Refactoring of DT interrupt parsing code in preparation for
     deferred probe of interrupts.
   - ARM cpu and cpu topology bindings documentation.
   - Various DT vendor binding documentation updates"

* tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits)
  powerpc: add missing explicit OF includes for ppc
  dt/irq: add empty of_irq_count for !OF_IRQ
  dt: disable self-tests for !OF_IRQ
  of: irq: Fix interrupt-map entry matching
  MIPS: Netlogic: replace early_init_devtree() call
  of: Add Panasonic Corporation vendor prefix
  of: Add Chunghwa Picture Tubes Ltd. vendor prefix
  of: Add AU Optronics Corporation vendor prefix
  of/irq: Fix potential buffer overflow
  of/irq: Fix bug in interrupt parsing refactor.
  of: set dma_mask to point to coherent_dma_mask
  of: add vendor prefix for PHYTEC Messtechnik GmbH
  DT: sort vendor-prefixes.txt
  of: Add vendor prefix for Cadence
  of: Add empty for_each_available_child_of_node() macro definition
  arm/versatile: Fix versatile irq specifications.
  of/irq: create interrupts-extended property
  microblaze/pci: Drop PowerPC-ism from irq parsing
  of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.
  of/irq: Use irq_of_parse_and_map()
  ...

Documentation/devicetree/bindings/interrupt-controller/interrupts.txt

@@ -4,16 +4,33 @@ Specifying interrupt information for devices
 1) Interrupt client nodes
 -------------------------
 
-Nodes that describe devices which generate interrupts must contain an
-"interrupts" property. This property must contain a list of interrupt
-specifiers, one per output interrupt. The format of the interrupt specifier is
-determined by the interrupt controller to which the interrupts are routed; see
-section 2 below for details.
+Nodes that describe devices which generate interrupts must contain an either an
+"interrupts" property or an "interrupts-extended" property. These properties
+contain a list of interrupt specifiers, one per output interrupt. The format of
+the interrupt specifier is determined by the interrupt controller to which the
+interrupts are routed; see section 2 below for details.
+
+  Example:
+	interrupt-parent = <&intc1>;
+	interrupts = <5 0>, <6 0>;
 
 The "interrupt-parent" property is used to specify the controller to which
 interrupts are routed and contains a single phandle referring to the interrupt
 controller node. This property is inherited, so it may be specified in an
-interrupt client node or in any of its parent nodes.
+interrupt client node or in any of its parent nodes. Interrupts listed in the
+"interrupts" property are always in reference to the node's interrupt parent.
+
+The "interrupts-extended" property is a special form for use when a node needs
+to reference multiple interrupt parents. Each entry in this property contains
+both the parent phandle and the interrupt specifier. "interrupts-extended"
+should only be used when a device has multiple interrupt parents.
+
+  Example:
+	interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
+
+A device node may contain either "interrupts" or "interrupts-extended", but not
+both. If both properties are present, then the operating system should log an
+error and use only the data in "interrupts".
 
 2) Interrupt controller nodes
 -----------------------------

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -12,12 +12,15 @@ amcc	Applied Micro Circuits Corporation (APM, formally AMCC)
 apm	Applied Micro Circuits Corporation (APM)
 arm	ARM Ltd.
 atmel	Atmel Corporation
+auo	AU Optronics Corporation
 avago	Avago Technologies
 bosch	Bosch Sensortec GmbH
 brcm	Broadcom Corporation
 capella	Capella Microsystems, Inc
 cavium	Cavium, Inc.
+cdns	Cadence Design Systems Inc.
 chrp	Common Hardware Reference Platform
+chunghwa	Chunghwa Picture Tubes Ltd.
 cirrus	Cirrus Logic, Inc.
 cortina	Cortina Systems, Inc.
 dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
@@ -46,6 +49,8 @@ nintendo	Nintendo
 nvidia	NVIDIA
 nxp	NXP Semiconductors
 onnn	ON Semiconductor Corp.
+panasonic	Panasonic Corporation
+phytec	PHYTEC Messtechnik GmbH
 picochip	Picochip Ltd
 powervr	PowerVR (deprecated, use img)
 qca	Qualcomm Atheros, Inc.
@@ -65,12 +70,12 @@ snps 	Synopsys, Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
 stericsson	ST-Ericsson
-toumaz	Toumaz
 ti	Texas Instruments
 toshiba	Toshiba Corporation
+toumaz	Toumaz
 v3	V3 Semiconductor
 via	VIA Technologies, Inc.
+winbond Winbond Electronics corp.
 wlf	Wolfson Microelectronics
 wm	Wondermedia Technologies, Inc.
-winbond Winbond Electronics corp.
 xlnx	Xilinx

arch/arc/include/asm/mach_desc.h

@@ -51,22 +51,12 @@ struct machine_desc {
 /*
  * Current machine - only accessible during boot.
  */
-extern struct machine_desc *machine_desc;
+extern const struct machine_desc *machine_desc;
 
 /*
  * Machine type table - also only accessible during boot
  */
-extern struct machine_desc __arch_info_begin[], __arch_info_end[];
-#define for_each_machine_desc(p)			\
-	for (p = __arch_info_begin; p < __arch_info_end; p++)
-
-static inline struct machine_desc *default_machine_desc(void)
-{
-	/* the default machine is the last one linked in */
-	if (__arch_info_end - 1 < __arch_info_begin)
-		return NULL;
-	return __arch_info_end - 1;
-}
+extern const struct machine_desc __arch_info_begin[], __arch_info_end[];
 
 /*
  * Set of macros to define architecture features.
@@ -81,7 +71,6 @@ __attribute__((__section__(".arch.info.init"))) = {	\
 #define MACHINE_END				\
 };
 
-extern struct machine_desc *setup_machine_fdt(void *dt);
-extern void __init copy_devtree(void);
+extern const struct machine_desc *setup_machine_fdt(void *dt);
 
 #endif

arch/arc/include/asm/prom.h

-/*
- * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _ASM_ARC_PROM_H_
-#define _ASM_ARC_PROM_H_
-
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
-#endif

arch/arc/kernel/devtree.c

@@ -14,10 +14,22 @@
 #include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
-#include <asm/prom.h>
 #include <asm/clk.h>
 #include <asm/mach_desc.h>
 
+static const void * __init arch_get_next_mach(const char *const **match)
+{
+	static const struct machine_desc *mdesc = __arch_info_begin;
+	const struct machine_desc *m = mdesc;
+
+	if (m >= __arch_info_end)
+		return NULL;
+
+	mdesc++;
+	*match = m->dt_compat;
+	return m;
+}
+
 /**
  * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
  * @dt:		virtual address pointer to dt blob
@@ -25,93 +37,24 @@
  * If a dtb was passed to the kernel, then use it to choose the correct
  * machine_desc and to setup the system.
  */
-struct machine_desc * __init setup_machine_fdt(void *dt)
+const struct machine_desc * __init setup_machine_fdt(void *dt)
 {
-	struct boot_param_header *devtree = dt;
-	struct machine_desc *mdesc = NULL, *mdesc_best = NULL;
-	unsigned int score, mdesc_score = ~1;
+	const struct machine_desc *mdesc;
 	unsigned long dt_root;
-	const char *model, *compat;
 	void *clk;
-	char manufacturer[16];
 	unsigned long len;
 
-	/* check device tree validity */
-	if (be32_to_cpu(devtree->magic) != OF_DT_HEADER)
+	if (!early_init_dt_scan(dt))
 		return NULL;
 
-	initial_boot_params = devtree;
-	dt_root = of_get_flat_dt_root();
-
-	/*
-	 * The kernel could be multi-platform enabled, thus could have many
-	 * "baked-in" machine descriptors. Search thru all for the best
-	 * "compatible" string match.
-	 */
-	for_each_machine_desc(mdesc) {
-		score = of_flat_dt_match(dt_root, mdesc->dt_compat);
-		if (score > 0 && score < mdesc_score) {
-			mdesc_best = mdesc;
-			mdesc_score = score;
-		}
-	}
-	if (!mdesc_best) {
-		const char *prop;
-		long size;
-
-		pr_err("\n unrecognized device tree list:\n[ ");
-
-		prop = of_get_flat_dt_prop(dt_root, "compatible", &size);
-		if (prop) {
-			while (size > 0) {
-				printk("'%s' ", prop);
-				size -= strlen(prop) + 1;
-				prop += strlen(prop) + 1;
-			}
-		}
-		printk("]\n\n");
-
+	mdesc = of_flat_dt_match_machine(NULL, arch_get_next_mach);
+	if (!mdesc)
 		machine_halt();
-	}
-
-	/* compat = "<manufacturer>,<model>" */
-	compat =  mdesc_best->dt_compat[0];
-
-	model = strchr(compat, ',');
-	if (model)
-		model++;
-
-	strlcpy(manufacturer, compat, model ? model - compat : strlen(compat));
-
-	pr_info("Board \"%s\" from %s (Manufacturer)\n", model, manufacturer);
-
-	/* Retrieve various information from the /chosen node */
-	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
-
-	/* Initialize {size,address}-cells info */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-
-	/* Setup memory, calling early_init_dt_add_memory_arch */
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 
+	dt_root = of_get_flat_dt_root();
 	clk = of_get_flat_dt_prop(dt_root, "clock-frequency", &len);
 	if (clk)
 		arc_set_core_freq(of_read_ulong(clk, len/4));
 
-	return mdesc_best;
-}
-
-/*
- * Copy the flattened DT out of .init since unflattening doesn't copy strings
- * and the normal DT APIs refs them from orig flat DT
- */
-void __init copy_devtree(void)
-{
-	void *alloc = early_init_dt_alloc_memory_arch(
-			be32_to_cpu(initial_boot_params->totalsize), 64);
-	if (alloc) {
-		memcpy(alloc, initial_boot_params,
-				be32_to_cpu(initial_boot_params->totalsize));
-		initial_boot_params = alloc;
-	}
+	return mdesc;
 }

arch/arc/kernel/setup.c

@@ -21,7 +21,6 @@
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <asm/irq.h>
-#include <asm/prom.h>
 #include <asm/unwind.h>
 #include <asm/clk.h>
 #include <asm/mach_desc.h>
@@ -31,7 +30,7 @@
 int running_on_hw = 1;	/* vs. on ISS */
 
 char __initdata command_line[COMMAND_LINE_SIZE];
-struct machine_desc *machine_desc;
+const struct machine_desc *machine_desc;
 
 struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
 
@@ -345,8 +344,7 @@ void __init setup_arch(char **cmdline_p)
 	setup_arch_memory();
 
 	/* copy flat DT out of .init and then unflatten it */
-	copy_devtree();
-	unflatten_device_tree();
+	unflatten_and_copy_device_tree();
 
 	/* Can be issue if someone passes cmd line arg "ro"
 	 * But that is unlikely so keeping it as it is

arch/arc/mm/init.c

@@ -125,10 +125,3 @@ void __init free_initrd_mem(unsigned long start, unsigned long end)
 	free_reserved_area((void *)start, (void *)end, -1, "initrd");
 }
 #endif
-
-#ifdef CONFIG_OF_FLATTREE
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	pr_err("%s(%llx, %llx)\n", __func__, start, end);
-}
-#endif /* CONFIG_OF_FLATTREE */

arch/arm/boot/dts/testcases/tests-interrupts.dtsi

+
+/ {
+	testcase-data {
+		interrupts {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			test_intc0: intc0 {
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			test_intc1: intc1 {
+				interrupt-controller;
+				#interrupt-cells = <3>;
+			};
+
+			test_intc2: intc2 {
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			test_intmap0: intmap0 {
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				interrupt-map = <1 &test_intc0 9>,
+						<2 &test_intc1 10 11 12>,
+						<3 &test_intc2 13 14>,
+						<4 &test_intc2 15 16>;
+			};
+
+			test_intmap1: intmap1 {
+				#interrupt-cells = <2>;
+				interrupt-map = <0x5000 1 2 &test_intc0 15>;
+			};
+
+			interrupts0 {
+				interrupt-parent = <&test_intc0>;
+				interrupts = <1>, <2>, <3>, <4>;
+			};
+
+			interrupts1 {
+				interrupt-parent = <&test_intmap0>;
+				interrupts = <1>, <2>, <3>, <4>;
+			};
+
+			interrupts-extended0 {
+				reg = <0x5000 0x100>;
+				interrupts-extended = <&test_intc0 1>,
+						      <&test_intc1 2 3 4>,
+						      <&test_intc2 5 6>,
+						      <&test_intmap0 1>,
+						      <&test_intmap0 2>,
+						      <&test_intmap0 3>,
+						      <&test_intmap1 1 2>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/testcases/tests.dtsi

 /include/ "tests-phandle.dtsi"
+/include/ "tests-interrupts.dtsi"

arch/arm/boot/dts/versatile-ab.dts

@@ -185,7 +185,7 @@ aaci@4000 {
 			mmc@5000 {
 				compatible = "arm,primecell";
 				reg = < 0x5000 0x1000>;
-				interrupts = <22 34>;
+				interrupts-extended = <&vic 22 &sic 2>;
 			};
 			kmi@6000 {
 				compatible = "arm,pl050", "arm,primecell";

arch/arm/boot/dts/versatile-pb.dts

@@ -41,7 +41,7 @@ sci@a000 {
 			mmc@b000 {
 				compatible = "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts = <23 34>;
+				interrupts-extended = <&vic 23 &sic 2>;
 			};
 		};
 	};

arch/arm/include/asm/prom.h

@@ -11,8 +11,6 @@
 #ifndef __ASMARM_PROM_H
 #define __ASMARM_PROM_H
 
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
 #ifdef CONFIG_OF
 
 extern const struct machine_desc *setup_machine_fdt(unsigned int dt_phys);

arch/arm/kernel/devtree.c

@@ -174,6 +174,19 @@ bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
 	return (phys_id & MPIDR_HWID_BITMASK) == cpu_logical_map(cpu);
 }
 
+static const void * __init arch_get_next_mach(const char *const **match)
+{
+	static const struct machine_desc *mdesc = __arch_info_begin;
+	const struct machine_desc *m = mdesc;
+
+	if (m >= __arch_info_end)
+		return NULL;
+
+	mdesc++;
+	*match = m->dt_compat;
+	return m;
+}
+
 /**
  * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
  * @dt_phys: physical address of dt blob
@@ -183,11 +196,7 @@ bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
  */
 const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 {
-	struct boot_param_header *devtree;
 	const struct machine_desc *mdesc, *mdesc_best = NULL;
-	unsigned int score, mdesc_score = ~1;
-	unsigned long dt_root;
-	const char *model;
 
 #ifdef CONFIG_ARCH_MULTIPLATFORM
 	DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
@@ -196,32 +205,20 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 	mdesc_best = &__mach_desc_GENERIC_DT;
 #endif
 
-	if (!dt_phys)
+	if (!dt_phys || !early_init_dt_scan(phys_to_virt(dt_phys)))
 		return NULL;
 
-	devtree = phys_to_virt(dt_phys);
+	mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
 
-	/* check device tree validity */
-	if (be32_to_cpu(devtree->magic) != OF_DT_HEADER)
-		return NULL;
-
-	/* Search the mdescs for the 'best' compatible value match */
-	initial_boot_params = devtree;
-	dt_root = of_get_flat_dt_root();
-	for_each_machine_desc(mdesc) {
-		score = of_flat_dt_match(dt_root, mdesc->dt_compat);
-		if (score > 0 && score < mdesc_score) {
-			mdesc_best = mdesc;
-			mdesc_score = score;
-		}
-	}
-	if (!mdesc_best) {
+	if (!mdesc) {
 		const char *prop;
 		long size;
+		unsigned long dt_root;
 
 		early_print("\nError: unrecognized/unsupported "
 			    "device tree compatible list:\n[ ");
 
+		dt_root = of_get_flat_dt_root();
 		prop = of_get_flat_dt_prop(dt_root, "compatible", &size);
 		while (size > 0) {
 			early_print("'%s' ", prop);
@@ -233,22 +230,8 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
 		dump_machine_table(); /* does not return */
 	}
 
-	model = of_get_flat_dt_prop(dt_root, "model", NULL);
-	if (!model)
-		model = of_get_flat_dt_prop(dt_root, "compatible", NULL);
-	if (!model)
-		model = "<unknown>";
-	pr_info("Machine: %s, model: %s\n", mdesc_best->name, model);
-
-	/* Retrieve various information from the /chosen node */
-	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
-	/* Initialize {size,address}-cells info */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	/* Setup memory, calling early_init_dt_add_memory_arch */
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-
 	/* Change machine number to match the mdesc we're using */
-	__machine_arch_type = mdesc_best->nr;
+	__machine_arch_type = mdesc->nr;
 
-	return mdesc_best;
+	return mdesc;
 }

arch/arm/mach-integrator/pci_v3.c

@@ -808,22 +808,6 @@ static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp)
 	return pci_common_swizzle(dev, pinp);
 }
 
-static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	struct of_irq oirq;
-	int ret;
-
-	ret = of_irq_map_pci(dev, &oirq);
-	if (ret) {
-		dev_err(&dev->dev, "of_irq_map_pci() %d\n", ret);
-		/* Proper return code 0 == NO_IRQ */
-		return 0;
-	}
-
-	return irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
-}
-
 static struct hw_pci pci_v3 __initdata = {
 	.swizzle		= pci_v3_swizzle,
 	.setup			= pci_v3_setup,
@@ -914,7 +898,7 @@ static int __init pci_v3_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	pci_v3.map_irq = pci_v3_map_irq_dt;
+	pci_v3.map_irq = of_irq_parse_and_map_pci;
 	pci_common_init_dev(&pdev->dev, &pci_v3);
 
 	return 0;

arch/arm/mach-keystone/platsmp.c

@@ -17,7 +17,6 @@
 #include <linux/io.h>
 
 #include <asm/smp_plat.h>
-#include <asm/prom.h>
 
 #include "keystone.h"
 

arch/arm/mach-u300/timer.c

@@ -358,8 +358,7 @@ static struct delay_timer u300_delay_timer;
  */
 static void __init u300_timer_init_of(struct device_node *np)
 {
-	struct resource irq_res;
-	int irq;
+	unsigned int irq;
 	struct clk *clk;
 	unsigned long rate;
 
@@ -368,11 +367,11 @@ static void __init u300_timer_init_of(struct device_node *np)
 		panic("could not ioremap system timer\n");
 
 	/* Get the IRQ for the GP1 timer */
-	irq = of_irq_to_resource(np, 2, &irq_res);
-	if (irq <= 0)
+	irq = irq_of_parse_and_map(np, 2);
+	if (!irq)
 		panic("no IRQ for system timer\n");
 
-	pr_info("U300 GP1 timer @ base: %p, IRQ: %d\n", u300_timer_base, irq);
+	pr_info("U300 GP1 timer @ base: %p, IRQ: %u\n", u300_timer_base, irq);
 
 	/* Clock the interrupt controller */
 	clk = of_clk_get(np, 0);

arch/arm/mm/init.c

@@ -76,14 +76,6 @@ static int __init parse_tag_initrd2(const struct tag *tag)
 
 __tagtable(ATAG_INITRD2, parse_tag_initrd2);
 
-#ifdef CONFIG_OF_FLATTREE
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	phys_initrd_start = start;
-	phys_initrd_size = end - start;
-}
-#endif /* CONFIG_OF_FLATTREE */
-
 /*
  * This keeps memory configuration data used by a couple memory
  * initialization functions, as well as show_mem() for the skipping
@@ -350,6 +342,11 @@ void __init arm_memblock_init(struct meminfo *mi,
 	memblock_reserve(__pa(_stext), _end - _stext);
 #endif
 #ifdef CONFIG_BLK_DEV_INITRD
+	/* FDT scan will populate initrd_start */
+	if (initrd_start) {
+		phys_initrd_start = __virt_to_phys(initrd_start);
+		phys_initrd_size = initrd_end - initrd_start;
+	}
 	if (phys_initrd_size &&
 	    !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) {
 		pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region - disabling initrd\n",

arch/arm64/include/asm/prom.h

-/* Empty for now */

arch/arm64/kernel/setup.c

@@ -140,70 +140,18 @@ static void __init setup_processor(void)
 
 static void __init setup_machine_fdt(phys_addr_t dt_phys)
 {
-	struct boot_param_header *devtree;
-	unsigned long dt_root;
-
-	/* Check we have a non-NULL DT pointer */
-	if (!dt_phys) {
-		early_print("\n"
-			"Error: NULL or invalid device tree blob\n"
-			"The dtb must be 8-byte aligned and passed in the first 512MB of memory\n"
-			"\nPlease check your bootloader.\n");
-
-		while (true)
-			cpu_relax();
-
-	}
-
-	devtree = phys_to_virt(dt_phys);
-
-	/* Check device tree validity */
-	if (be32_to_cpu(devtree->magic) != OF_DT_HEADER) {
+	if (!dt_phys || !early_init_dt_scan(phys_to_virt(dt_phys))) {
 		early_print("\n"
 			"Error: invalid device tree blob at physical address 0x%p (virtual address 0x%p)\n"
-			"Expected 0x%x, found 0x%x\n"
+			"The dtb must be 8-byte aligned and passed in the first 512MB of memory\n"
 			"\nPlease check your bootloader.\n",
-			dt_phys, devtree, OF_DT_HEADER,
-			be32_to_cpu(devtree->magic));
+			dt_phys, phys_to_virt(dt_phys));
 
 		while (true)
 			cpu_relax();
 	}
 
-	initial_boot_params = devtree;
-	dt_root = of_get_flat_dt_root();
-
-	machine_name = of_get_flat_dt_prop(dt_root, "model", NULL);
-	if (!machine_name)
-		machine_name = of_get_flat_dt_prop(dt_root, "compatible", NULL);
-	if (!machine_name)
-		machine_name = "<unknown>";
-	pr_info("Machine: %s\n", machine_name);
-
-	/* Retrieve various information from the /chosen node */
-	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
-	/* Initialize {size,address}-cells info */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	/* Setup memory, calling early_init_dt_add_memory_arch */
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-}
-
-void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-{
-	base &= PAGE_MASK;
-	size &= PAGE_MASK;
-	if (base + size < PHYS_OFFSET) {
-		pr_warning("Ignoring memory block 0x%llx - 0x%llx\n",
-			   base, base + size);
-		return;
-	}
-	if (base < PHYS_OFFSET) {
-		pr_warning("Ignoring memory range 0x%llx - 0x%llx\n",
-			   base, PHYS_OFFSET);
-		size -= PHYS_OFFSET - base;
-		base = PHYS_OFFSET;
-	}
-	memblock_add(base, size);
+	machine_name = of_flat_dt_get_machine_name();
 }
 
 /*

arch/arm64/mm/init.c

@@ -31,7 +31,6 @@
 #include <linux/sort.h>
 #include <linux/of_fdt.h>
 
-#include <asm/prom.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/sizes.h>
@@ -39,17 +38,9 @@
 
 #include "mm.h"
 
-static unsigned long phys_initrd_start __initdata = 0;
-static unsigned long phys_initrd_size __initdata = 0;
-
 phys_addr_t memstart_addr __read_mostly = 0;
 
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	phys_initrd_start = start;
-	phys_initrd_size = end - start;
-}
-
+#ifdef CONFIG_BLK_DEV_INITRD
 static int __init early_initrd(char *p)
 {
 	unsigned long start, size;
@@ -59,12 +50,13 @@ static int __init early_initrd(char *p)
 	if (*endp == ',') {
 		size = memparse(endp + 1, NULL);
 
-		phys_initrd_start = start;
-		phys_initrd_size = size;
+		initrd_start = (unsigned long)__va(start);
+		initrd_end = (unsigned long)__va(start + size);
 	}
 	return 0;
 }
 early_param("initrd", early_initrd);
+#endif
 
 #define MAX_DMA32_PFN ((4UL * 1024 * 1024 * 1024) >> PAGE_SHIFT)
 
@@ -137,13 +129,8 @@ void __init arm64_memblock_init(void)
 	/* Register the kernel text, kernel data and initrd with memblock */
 	memblock_reserve(__pa(_text), _end - _text);
 #ifdef CONFIG_BLK_DEV_INITRD
-	if (phys_initrd_size) {
-		memblock_reserve(phys_initrd_start, phys_initrd_size);
-
-		/* Now convert initrd to virtual addresses */
-		initrd_start = __phys_to_virt(phys_initrd_start);
-		initrd_end = initrd_start + phys_initrd_size;
-	}
+	if (initrd_start)
+		memblock_reserve(__virt_to_phys(initrd_start), initrd_end - initrd_start);
 #endif
 
 	/*

arch/c6x/include/asm/prom.h

-/* dummy prom.h; here to make linux/of.h's #includes happy */

arch/c6x/include/asm/setup.h

@@ -14,8 +14,6 @@
 #include <uapi/asm/setup.h>
 
 #ifndef __ASSEMBLY__
-extern char c6x_command_line[COMMAND_LINE_SIZE];
-
 extern int c6x_add_memory(phys_addr_t start, unsigned long size);
 
 extern unsigned long ram_start;

arch/c6x/kernel/devicetree.c

@@ -10,37 +10,8 @@
  *
  */
 #include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_fdt.h>
-#include <linux/initrd.h>
 #include <linux/memblock.h>
 
-void __init early_init_devtree(void *params)
-{
-	/* Setup flat device-tree pointer */
-	initial_boot_params = params;
-
-	/* Retrieve various informations from the /chosen node of the
-	 * device-tree, including the platform type, initrd location and
-	 * size and more ...
-	 */
-	of_scan_flat_dt(early_init_dt_scan_chosen, c6x_command_line);
-
-	/* Scan memory nodes and rebuild MEMBLOCKs */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-}
-
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	initrd_start = (unsigned long)__va(start);
-	initrd_end = (unsigned long)__va(end);
-	initrd_below_start_ok = 1;
-}
-#endif
-
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
 	c6x_add_memory(base, size);

arch/c6x/kernel/setup.c

@@ -68,13 +68,6 @@ unsigned long ram_end;
 static unsigned long dma_start __initdata;
 static unsigned long dma_size __initdata;
 
-char c6x_command_line[COMMAND_LINE_SIZE];
-
-#if defined(CONFIG_CMDLINE_BOOL)
-static const char default_command_line[COMMAND_LINE_SIZE] __section(.cmdline) =
-	CONFIG_CMDLINE;
-#endif
-
 struct cpuinfo_c6x {
 	const char *cpu_name;
 	const char *cpu_voltage;
@@ -294,10 +287,8 @@ notrace void __init machine_init(unsigned long dt_ptr)
 		fdt = dtb;
 
 	/* Do some early initialization based on the flat device tree */
-	early_init_devtree(fdt);
+	early_init_dt_scan(fdt);
 
-	/* parse_early_param needs a boot_command_line */
-	strlcpy(boot_command_line, c6x_command_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 }
 
@@ -309,7 +300,7 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "Initializing kernel\n");
 
 	/* Initialize command line */
-	*cmdline_p = c6x_command_line;
+	*cmdline_p = boot_command_line;
 
 	memory_end = ram_end;
 	memory_end &= ~(PAGE_SIZE - 1);

arch/c6x/kernel/vmlinux.lds.S

@@ -37,12 +37,6 @@ SECTIONS
 		_vectors_end = .;
 	}
 
-	. = ALIGN(0x1000);
-	.cmdline :
-	{
-		*(.cmdline)
-	}
-
 	/*
 	 * This section contains data which may be shared with other
 	 * cores. It needs to be a fixed offset from PAGE_OFFSET

arch/hexagon/kernel/setup.c

@@ -32,9 +32,6 @@
 #include <asm/hexagon_vm.h>
 #include <asm/vm_mmu.h>
 #include <asm/time.h>
-#ifdef CONFIG_OF
-#include <asm/prom.h>
-#endif
 
 char cmd_line[COMMAND_LINE_SIZE];
 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;

arch/metag/include/asm/mach/arch.h

@@ -53,7 +53,7 @@ struct machine_desc {
 /*
  * Current machine - only accessible during boot.
  */
-extern struct machine_desc *machine_desc;
+extern const struct machine_desc *machine_desc;
 
 /*
  * Machine type table - also only accessible during boot

arch/metag/include/asm/prom.h

-/*
- *  arch/metag/include/asm/prom.h
- *
- *  Copyright (C) 2012 Imagination Technologies Ltd.
- *
- *  Based on ARM version:
- *  Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __ASM_METAG_PROM_H
-#define __ASM_METAG_PROM_H
-
-#include <asm/setup.h>
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
-extern struct machine_desc *setup_machine_fdt(void *dt);
-extern void copy_fdt(void);
-
-#endif /* __ASM_METAG_PROM_H */

arch/metag/include/asm/setup.h

@@ -3,6 +3,7 @@
 
 #include <uapi/asm/setup.h>
 
+extern const struct machine_desc *setup_machine_fdt(void *dt);
 void per_cpu_trap_init(unsigned long);
 extern void __init dump_machine_table(void);
 #endif /* _ASM_METAG_SETUP_H */

arch/metag/kernel/devtree.c

@@ -34,6 +34,19 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 	return alloc_bootmem_align(size, align);
 }
 
+static const void * __init arch_get_next_mach(const char *const **match)
+{
+	static const struct machine_desc *mdesc = __arch_info_begin;
+	const struct machine_desc *m = mdesc;
+
+	if (m >= __arch_info_end)
+		return NULL;
+
+	mdesc++;
+	*match = m->dt_compat;
+	return m;
+}
+
 /**
  * setup_machine_fdt - Machine setup when an dtb was passed to the kernel
  * @dt:		virtual address pointer to dt blob
@@ -41,74 +54,18 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
  * If a dtb was passed to the kernel, then use it to choose the correct
  * machine_desc and to setup the system.
  */
-struct machine_desc * __init setup_machine_fdt(void *dt)
+const struct machine_desc * __init setup_machine_fdt(void *dt)
 {
-	struct boot_param_header *devtree = dt;
-	struct machine_desc *mdesc, *mdesc_best = NULL;
-	unsigned int score, mdesc_score = ~1;
-	unsigned long dt_root;
-	const char *model;
+	const struct machine_desc *mdesc;
 
 	/* check device tree validity */
-	if (be32_to_cpu(devtree->magic) != OF_DT_HEADER)
+	if (!early_init_dt_scan(dt))
 		return NULL;
 
-	/* Search the mdescs for the 'best' compatible value match */
-	initial_boot_params = devtree;
-	dt_root = of_get_flat_dt_root();
-
-	for_each_machine_desc(mdesc) {
-		score = of_flat_dt_match(dt_root, mdesc->dt_compat);
-		if (score > 0 && score < mdesc_score) {
-			mdesc_best = mdesc;
-			mdesc_score = score;
-		}
-	}
-	if (!mdesc_best) {
-		const char *prop;
-		long size;
-
-		pr_err("\nError: unrecognized/unsupported device tree compatible list:\n[ ");
-
-		prop = of_get_flat_dt_prop(dt_root, "compatible", &size);
-		if (prop) {
-			while (size > 0) {
-				printk("'%s' ", prop);
-				size -= strlen(prop) + 1;
-				prop += strlen(prop) + 1;
-			}
-		}
-		printk("]\n\n");
-
+	mdesc = of_flat_dt_match_machine(NULL, arch_get_next_mach);
+	if (!mdesc)
 		dump_machine_table(); /* does not return */
-	}
-
-	model = of_get_flat_dt_prop(dt_root, "model", NULL);
-	if (!model)
-		model = of_get_flat_dt_prop(dt_root, "compatible", NULL);
-	if (!model)
-		model = "<unknown>";
-	pr_info("Machine: %s, model: %s\n", mdesc_best->name, model);
-
-	/* Retrieve various information from the /chosen node */
-	of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line);
-
-	return mdesc_best;
-}
+	pr_info("Machine name: %s\n", mdesc->name);
 
-/**
- * copy_fdt - Copy device tree into non-init memory.
- *
- * We must copy the flattened device tree blob into non-init memory because the
- * unflattened device tree will reference the strings in it directly.
- */
-void __init copy_fdt(void)
-{
-	void *alloc = early_init_dt_alloc_memory_arch(
-			be32_to_cpu(initial_boot_params->totalsize), 0x40);
-	if (alloc) {
-		memcpy(alloc, initial_boot_params,
-		       be32_to_cpu(initial_boot_params->totalsize));
-		initial_boot_params = alloc;
-	}
+	return mdesc;
 }

arch/metag/kernel/setup.c

@@ -42,7 +42,6 @@
 #include <asm/mmu.h>
 #include <asm/mmzone.h>
 #include <asm/processor.h>
-#include <asm/prom.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/traps.h>
@@ -115,7 +114,7 @@ extern u32 __dtb_start[];
 extern struct console dash_console;
 #endif
 
-struct machine_desc *machine_desc __initdata;
+const struct machine_desc *machine_desc __initdata;
 
 /*
  * Map a Linux CPU number to a hardware thread ID
@@ -404,9 +403,7 @@ void __init setup_arch(char **cmdline_p)
 	cpu_2_hwthread_id[smp_processor_id()] = hard_processor_id();
 	hwthread_id_2_cpu[hard_processor_id()] = smp_processor_id();
 
-	/* Copy device tree blob into non-init memory before unflattening */
-	copy_fdt();
-	unflatten_device_tree();
+	unflatten_and_copy_device_tree();
 
 #ifdef CONFIG_SMP
 	smp_init_cpus();

arch/metag/mm/init.c

@@ -12,7 +12,6 @@
 #include <linux/percpu.h>
 #include <linux/memblock.h>
 #include <linux/initrd.h>
-#include <linux/of_fdt.h>
 
 #include <asm/setup.h>
 #include <asm/page.h>
@@ -405,11 +404,3 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 			   "initrd");
 }
 #endif
-
-#ifdef CONFIG_OF_FLATTREE
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	pr_err("%s(%llx, %llx)\n",
-	       __func__, start, end);
-}
-#endif /* CONFIG_OF_FLATTREE */

arch/microblaze/include/asm/pci.h

@@ -127,8 +127,6 @@ extern void of_scan_pci_bridge(struct device_node *node,
 extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
 extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus);
 
-extern int pci_read_irq_line(struct pci_dev *dev);
-
 extern int pci_bus_find_capability(struct pci_bus *bus,
 						unsigned int devfn, int cap);
 

arch/microblaze/include/asm/prom.h

@@ -11,19 +11,10 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-
-#include <linux/of.h>	/* linux/of.h gets to determine #include ordering */
-
 #ifndef _ASM_MICROBLAZE_PROM_H
 #define _ASM_MICROBLAZE_PROM_H
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <asm/irq.h>
-#include <linux/atomic.h>
 
-#define HAVE_ARCH_DEVTREE_FIXUPS
+#include <linux/of.h>
 
 /* Other Prototypes */
 enum early_consoles {
@@ -33,32 +24,4 @@ enum early_consoles {
 
 extern int of_early_console(void *version);
 
-/*
- * OF address retreival & translation
- */
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#define pci_address_to_pio pci_address_to_pio
-#endif	/* CONFIG_PCI */
-
-/* Parse the ibm,dma-window property of an OF node into the busno, phys and
- * size parameters.
- */
-void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
-		unsigned long *busno, unsigned long *phys, unsigned long *size);
-
-extern void kdump_move_device_tree(void);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
-/* These includes are put at the bottom because they may contain things
- * that are overridden by this file.  Ideally they shouldn't be included
- * by this file, but there are a bunch of .c files that currently depend
- * on it.  Eventually they will be cleaned up. */
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/platform_device.h>
-
 #endif /* _ASM_MICROBLAZE_PROM_H */

arch/microblaze/kernel/prom.c

@@ -30,6 +30,7 @@
 #include <linux/debugfs.h>
 #include <linux/irq.h>
 #include <linux/memblock.h>
+#include <linux/of_fdt.h>
 
 #include <asm/prom.h>
 #include <asm/page.h>
@@ -41,11 +42,6 @@
 #include <asm/sections.h>
 #include <asm/pci-bridge.h>
 
-void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-{
-	memblock_add(base, size);
-}
-
 #ifdef CONFIG_EARLY_PRINTK
 static char *stdout;
 
@@ -106,21 +102,10 @@ void __init early_init_devtree(void *params)
 {
 	pr_debug(" -> early_init_devtree(%p)\n", params);
 
-	/* Setup flat device-tree pointer */
-	initial_boot_params = params;
-
-	/* Retrieve various informations from the /chosen node of the
-	 * device-tree, including the platform type, initrd location and
-	 * size, TCE reserve, and more ...
-	 */
-	of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
-
-	/* Scan memory nodes and rebuild MEMBLOCKs */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+	early_init_dt_scan(params);
+	if (!strlen(boot_command_line))
+		strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 
-	/* Save command line for /proc/cmdline and then parse parameters */
-	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
 	memblock_allow_resize();
@@ -130,15 +115,6 @@ void __init early_init_devtree(void *params)
 	pr_debug(" <- early_init_devtree()\n");
 }
 
-#ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	initrd_start = (unsigned long)__va(start);
-	initrd_end = (unsigned long)__va(end);
-	initrd_below_start_ok = 1;
-}
-#endif
-
 /*******
  *
  * New implementation of the OF "find" APIs, return a refcounted

arch/microblaze/kernel/setup.c

@@ -16,6 +16,7 @@
 #include <linux/initrd.h>
 #include <linux/console.h>
 #include <linux/debugfs.h>
+#include <linux/of_fdt.h>
 
 #include <asm/setup.h>
 #include <asm/sections.h>
@@ -50,7 +51,7 @@ char cmd_line[COMMAND_LINE_SIZE] __attribute__ ((section(".data")));
 
 void __init setup_arch(char **cmdline_p)
 {
-	*cmdline_p = cmd_line;
+	*cmdline_p = boot_command_line;
 
 	console_verbose();
 

arch/microblaze/kernel/timer.c

@@ -15,6 +15,7 @@
 #include <linux/clk.h>
 #include <linux/clockchips.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <asm/cpuinfo.h>
 #include <linux/cnt32_to_63.h>
 

arch/microblaze/pci/pci-common.c

@@ -29,6 +29,7 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_pci.h>
 #include <linux/export.h>
 
@@ -192,76 +193,6 @@ void pcibios_set_master(struct pci_dev *dev)
 	/* No special bus mastering setup handling */
 }
 
-/*
- * Reads the interrupt pin to determine if interrupt is use by card.
- * If the interrupt is used, then gets the interrupt line from the
- * openfirmware and sets it in the pci_dev and pci_config line.
- */
-int pci_read_irq_line(struct pci_dev *pci_dev)
-{
-	struct of_irq oirq;
-	unsigned int virq;
-
-	/* The current device-tree that iSeries generates from the HV
-	 * PCI informations doesn't contain proper interrupt routing,
-	 * and all the fallback would do is print out crap, so we
-	 * don't attempt to resolve the interrupts here at all, some
-	 * iSeries specific fixup does it.
-	 *
-	 * In the long run, we will hopefully fix the generated device-tree
-	 * instead.
-	 */
-	pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
-
-#ifdef DEBUG
-	memset(&oirq, 0xff, sizeof(oirq));
-#endif
-	/* Try to get a mapping from the device-tree */
-	if (of_irq_map_pci(pci_dev, &oirq)) {
-		u8 line, pin;
-
-		/* If that fails, lets fallback to what is in the config
-		 * space and map that through the default controller. We
-		 * also set the type to level low since that's what PCI
-		 * interrupts are. If your platform does differently, then
-		 * either provide a proper interrupt tree or don't use this
-		 * function.
-		 */
-		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
-			return -1;
-		if (pin == 0)
-			return -1;
-		if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
-		    line == 0xff || line == 0) {
-			return -1;
-		}
-		pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
-			 line, pin);
-
-		virq = irq_create_mapping(NULL, line);
-		if (virq)
-			irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
-	} else {
-		pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
-			 oirq.size, oirq.specifier[0], oirq.specifier[1],
-			 of_node_full_name(oirq.controller));
-
-		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-					     oirq.size);
-	}
-	if (!virq) {
-		pr_debug(" Failed to map !\n");
-		return -1;
-	}
-
-	pr_debug(" Mapped to linux irq %d\n", virq);
-
-	pci_dev->irq = virq;
-
-	return 0;
-}
-EXPORT_SYMBOL(pci_read_irq_line);
-
 /*
  * Platform support for /proc/bus/pci/X/Y mmap()s,
  * modelled on the sparc64 implementation by Dave Miller.
@@ -960,7 +891,7 @@ void pcibios_setup_bus_devices(struct pci_bus *bus)
 		dev->dev.archdata.dma_data = (void *)PCI_DRAM_OFFSET;
 
 		/* Read default IRQs and fixup if necessary */
-		pci_read_irq_line(dev);
+		dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
 	}
 }
 

arch/mips/include/asm/netlogic/xlp-hal/xlp.h

@@ -69,6 +69,7 @@ void nlm_hal_init(void);
 int xlp_get_dram_map(int n, uint64_t *dram_map);
 
 /* Device tree related */
+void xlp_early_init_devtree(void);
 void *xlp_dt_init(void *fdtp);
 
 static inline int cpu_is_xlpii(void)

arch/mips/include/asm/prom.h

@@ -17,22 +17,8 @@
 #include <linux/types.h>
 #include <asm/bootinfo.h>
 
-extern int early_init_dt_scan_memory_arch(unsigned long node,
-	const char *uname, int depth, void *data);
-
 extern void device_tree_init(void);
 
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	/*
-	 * The ioport address can be directly used by inX() / outX()
-	 */
-	BUG_ON(address > IO_SPACE_LIMIT);
-
-	return (unsigned long) address;
-}
-#define pci_address_to_pio pci_address_to_pio
-
 struct boot_param_header;
 
 extern void __dt_setup_arch(struct boot_param_header *bph);

arch/mips/kernel/prom.c

@@ -13,12 +13,9 @@
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/bootmem.h>
-#include <linux/initrd.h>
 #include <linux/debugfs.h>
 #include <linux/of.h>
 #include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
 
 #include <asm/page.h>
 #include <asm/prom.h>
@@ -40,13 +37,6 @@ char *mips_get_machine_name(void)
 }
 
 #ifdef CONFIG_OF
-int __init early_init_dt_scan_memory_arch(unsigned long node,
-					  const char *uname, int depth,
-					  void *data)
-{
-	return early_init_dt_scan_memory(node, uname, depth, data);
-}
-
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
 	return add_memory_region(base, size, BOOT_MEM_RAM);
@@ -57,57 +47,11 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 	return __alloc_bootmem(size, align, __pa(MAX_DMA_ADDRESS));
 }
 
-#ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	initrd_start = (unsigned long)__va(start);
-	initrd_end = (unsigned long)__va(end);
-	initrd_below_start_ok = 1;
-}
-#endif
-
-int __init early_init_dt_scan_model(unsigned long node,	const char *uname,
-				    int depth, void *data)
-{
-	if (!depth) {
-		char *model = of_get_flat_dt_prop(node, "model", NULL);
-
-		if (model)
-			mips_set_machine_name(model);
-	}
-	return 0;
-}
-
-void __init early_init_devtree(void *params)
-{
-	/* Setup flat device-tree pointer */
-	initial_boot_params = params;
-
-	/* Retrieve various informations from the /chosen node of the
-	 * device-tree, including the platform type, initrd location and
-	 * size, and more ...
-	 */
-	of_scan_flat_dt(early_init_dt_scan_chosen, arcs_cmdline);
-
-
-	/* Scan memory nodes */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	of_scan_flat_dt(early_init_dt_scan_memory_arch, NULL);
-
-	/* try to load the mips machine name */
-	of_scan_flat_dt(early_init_dt_scan_model, NULL);
-}
-
 void __init __dt_setup_arch(struct boot_param_header *bph)
 {
-	if (be32_to_cpu(bph->magic) != OF_DT_HEADER) {
-		pr_err("DTB has bad magic, ignoring builtin OF DTB\n");
-
+	if (!early_init_dt_scan(bph))
 		return;
-	}
-
-	initial_boot_params = bph;
 
-	early_init_devtree(initial_boot_params);
+	mips_set_machine_name(of_flat_dt_get_machine_name());
 }
 #endif

arch/mips/lantiq/prom.c

@@ -14,6 +14,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/time.h>
+#include <asm/prom.h>
 
 #include <lantiq.h>
 

arch/mips/mti-sead3/sead3-setup.c

@@ -10,6 +10,8 @@
 #include <linux/of_fdt.h>
 #include <linux/bootmem.h>
 
+#include <asm/prom.h>
+
 #include <asm/mips-boards/generic.h>
 
 const char *get_system_type(void)

arch/mips/netlogic/xlp/dt.c

@@ -39,8 +39,11 @@
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
 
+#include <asm/prom.h>
+
 extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[],
 	__dtb_xlp_fvp_begin[], __dtb_start[];
+static void *xlp_fdt_blob;
 
 void __init *xlp_dt_init(void *fdtp)
 {
@@ -67,19 +70,26 @@ void __init *xlp_dt_init(void *fdtp)
 			break;
 		}
 	}
-	initial_boot_params = fdtp;
+	xlp_fdt_blob = fdtp;
 	return fdtp;
 }
 
+void __init xlp_early_init_devtree(void)
+{
+	__dt_setup_arch(xlp_fdt_blob);
+	strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+}
+
 void __init device_tree_init(void)
 {
 	unsigned long base, size;
+	struct boot_param_header *fdtp = xlp_fdt_blob;
 
-	if (!initial_boot_params)
+	if (!fdtp)
 		return;
 
-	base = virt_to_phys((void *)initial_boot_params);
-	size = be32_to_cpu(initial_boot_params->totalsize);
+	base = virt_to_phys(fdtp);
+	size = be32_to_cpu(fdtp->totalsize);
 
 	/* Before we do anything, lets reserve the dt blob */
 	reserve_bootmem(base, size, BOOTMEM_DEFAULT);

arch/mips/netlogic/xlp/setup.c

@@ -98,7 +98,7 @@ void __init plat_mem_setup(void)
 	pm_power_off	= nlm_linux_exit;
 
 	/* memory and bootargs from DT */
-	early_init_devtree(initial_boot_params);
+	xlp_early_init_devtree();
 
 	if (boot_mem_map.nr_map == 0) {
 		pr_info("Using DRAM BARs for memory map.\n");

arch/mips/pci/fixup-lantiq.c

@@ -25,16 +25,5 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	struct of_irq dev_irq;
-	int irq;
-
-	if (of_irq_map_pci(dev, &dev_irq)) {
-		dev_err(&dev->dev, "trying to map irq for unknown slot:%d pin:%d\n",
-			slot, pin);
-		return 0;
-	}
-	irq = irq_create_of_mapping(dev_irq.controller, dev_irq.specifier,
-					dev_irq.size);
-	dev_info(&dev->dev, "SLOT:%d PIN:%d IRQ:%d\n", slot, pin, irq);
-	return irq;
+	return of_irq_parse_and_map_pci(dev, slot, pin);
 }

arch/mips/pci/pci-rt3883.c

@@ -583,29 +583,7 @@ static int rt3883_pci_probe(struct platform_device *pdev)
 
 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
-	struct of_irq dev_irq;
-	int err;
-	int irq;
-
-	err = of_irq_map_pci(dev, &dev_irq);
-	if (err) {
-		pr_err("pci %s: unable to get irq map, err=%d\n",
-		       pci_name((struct pci_dev *) dev), err);
-		return 0;
-	}
-
-	irq = irq_create_of_mapping(dev_irq.controller,
-				    dev_irq.specifier,
-				    dev_irq.size);
-
-	if (irq == 0)
-		pr_crit("pci %s: no irq found for pin %u\n",
-			pci_name((struct pci_dev *) dev), pin);
-	else
-		pr_info("pci %s: using irq %d for pin %u\n",
-			pci_name((struct pci_dev *) dev), irq, pin);
-
-	return irq;
+	return of_irq_parse_and_map_pci(dev, slot, pin);
 }
 
 int pcibios_plat_dev_init(struct pci_dev *dev)

arch/mips/ralink/of.c

@@ -21,6 +21,7 @@
 #include <asm/reboot.h>
 #include <asm/bootinfo.h>
 #include <asm/addrspace.h>
+#include <asm/prom.h>
 
 #include "common.h"
 

arch/openrisc/include/asm/prom.h

-/*
- * OpenRISC Linux
- *
- * Linux architectural port borrowing liberally from similar works of
- * others.  All original copyrights apply as per the original source
- * declaration.
- *
- * OpenRISC implementation:
- * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
- * et al.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef _ASM_OPENRISC_PROM_H
-#define _ASM_OPENRISC_PROM_H
-
-#define HAVE_ARCH_DEVTREE_FIXUPS
-
-#endif /* _ASM_OPENRISC_PROM_H */

arch/openrisc/kernel/prom.c

@@ -18,83 +18,15 @@
  *
  */
 
-#include <stdarg.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
 #include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/spinlock.h>
 #include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/stringify.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/kexec.h>
-#include <linux/debugfs.h>
-#include <linux/irq.h>
 #include <linux/memblock.h>
 #include <linux/of_fdt.h>
 
-#include <asm/prom.h>
 #include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <linux/io.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-
-extern char cmd_line[COMMAND_LINE_SIZE];
-
-void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-{
-	size &= PAGE_MASK;
-	memblock_add(base, size);
-}
 
 void __init early_init_devtree(void *params)
 {
-	void *alloc;
-
-	/* Setup flat device-tree pointer */
-	initial_boot_params = params;
-
-
-	/* Retrieve various informations from the /chosen node of the
-	 * device-tree, including the platform type, initrd location and
-	 * size, TCE reserve, and more ...
-	 */
-	of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
-
-	/* Scan memory nodes and rebuild MEMBLOCKs */
-	of_scan_flat_dt(early_init_dt_scan_root, NULL);
-	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-
-	/* Save command line for /proc/cmdline and then parse parameters */
-	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
-
+	early_init_dt_scan(params);
 	memblock_allow_resize();
-
-	/* We must copy the flattend device tree from init memory to regular
-	 * memory because the device tree references the strings in it
-	 * directly.
-	 */
-
-	alloc = __va(memblock_alloc(initial_boot_params->totalsize, PAGE_SIZE));
-
-	memcpy(alloc, initial_boot_params, initial_boot_params->totalsize);
-
-	initial_boot_params = alloc;
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	initrd_start = (unsigned long)__va(start);
-	initrd_end = (unsigned long)__va(end);
-	initrd_below_start_ok = 1;
 }
-#endif

arch/openrisc/kernel/setup.c

@@ -50,8 +50,6 @@
 
 #include "vmlinux.h"
 
-char __initdata cmd_line[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
-
 static unsigned long __init setup_memory(void)
 {
 	unsigned long bootmap_size;
@@ -285,7 +283,7 @@ void __init setup_arch(char **cmdline_p)
 {
 	unsigned long max_low_pfn;
 
-	unflatten_device_tree();
+	unflatten_and_copy_device_tree();
 
 	setup_cpuinfo();
 
@@ -316,7 +314,7 @@ void __init setup_arch(char **cmdline_p)
 		conswitchp = &dummy_con;
 #endif
 
-	*cmdline_p = cmd_line;
+	*cmdline_p = boot_command_line;
 
 	printk(KERN_INFO "OpenRISC Linux -- http://openrisc.net\n");
 }

arch/powerpc/include/asm/prom.h

-#include <linux/of.h>	/* linux/of.h gets to determine #include ordering */
 #ifndef _POWERPC_PROM_H
 #define _POWERPC_PROM_H
 #ifdef __KERNEL__
@@ -20,21 +19,17 @@
 #include <asm/irq.h>
 #include <linux/atomic.h>
 
-#define HAVE_ARCH_DEVTREE_FIXUPS
+/* These includes should be removed once implicit includes are cleaned up. */
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
 
 /*
  * OF address retreival & translation
  */
 
-/* Translate a DMA address from device space to CPU space */
-extern u64 of_translate_dma_address(struct device_node *dev,
-				    const __be32 *in_addr);
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#define pci_address_to_pio pci_address_to_pio
-#endif	/* CONFIG_PCI */
-
 /* Parse the ibm,dma-window property of an OF node into the busno, phys and
  * size parameters.
  */
@@ -44,13 +39,6 @@ void of_parse_dma_window(struct device_node *dn, const __be32 *dma_window,
 
 extern void kdump_move_device_tree(void);
 
-#ifdef CONFIG_NUMA
-extern int of_node_to_nid(struct device_node *device);
-#else
-static inline int of_node_to_nid(struct device_node *device) { return 0; }
-#endif
-#define of_node_to_nid of_node_to_nid
-
 extern void of_instantiate_rtc(void);
 
 extern int of_get_ibm_chip_id(struct device_node *np);
@@ -140,14 +128,5 @@ struct of_drconf_cell {
  */
 extern unsigned char ibm_architecture_vec[];
 
-/* These includes are put at the bottom because they may contain things
- * that are overridden by this file.  Ideally they shouldn't be included
- * by this file, but there are a bunch of .c files that currently depend
- * on it.  Eventually they will be cleaned up. */
-#include <linux/of_fdt.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/platform_device.h>
-
 #endif /* __KERNEL__ */
 #endif /* _POWERPC_PROM_H */

arch/powerpc/kernel/epapr_paravirt.c

@@ -18,6 +18,7 @@
  */
 
 #include <linux/of.h>
+#include <linux/of_fdt.h>
 #include <asm/epapr_hcalls.h>
 #include <asm/cacheflush.h>
 #include <asm/code-patching.h>

arch/powerpc/kernel/pci-common.c

@@ -228,7 +228,7 @@ int pcibios_add_platform_entries(struct pci_dev *pdev)
  */
 static int pci_read_irq_line(struct pci_dev *pci_dev)
 {
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 	unsigned int virq;
 
 	pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
@@ -237,7 +237,7 @@ static int pci_read_irq_line(struct pci_dev *pci_dev)
 	memset(&oirq, 0xff, sizeof(oirq));
 #endif
 	/* Try to get a mapping from the device-tree */
-	if (of_irq_map_pci(pci_dev, &oirq)) {
+	if (of_irq_parse_pci(pci_dev, &oirq)) {
 		u8 line, pin;
 
 		/* If that fails, lets fallback to what is in the config
@@ -263,11 +263,10 @@ static int pci_read_irq_line(struct pci_dev *pci_dev)
 			irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
 	} else {
 		pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
-			 oirq.size, oirq.specifier[0], oirq.specifier[1],
-			 of_node_full_name(oirq.controller));
+			 oirq.args_count, oirq.args[0], oirq.args[1],
+			 of_node_full_name(oirq.np));
 
-		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-					     oirq.size);
+		virq = irq_create_of_mapping(&oirq);
 	}
 	if(virq == NO_IRQ) {
 		pr_debug(" Failed to map !\n");

arch/powerpc/kernel/prom.c

@@ -546,15 +546,6 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 	memblock_add(base, size);
 }
 
-#ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
-	initrd_start = (unsigned long)__va(start);
-	initrd_end = (unsigned long)__va(end);
-	initrd_below_start_ok = 1;
-}
-#endif
-
 static void __init early_reserve_mem_dt(void)
 {
 	unsigned long i, len, dt_root;

arch/powerpc/platforms/512x/clock.c

@@ -24,6 +24,7 @@
 #include <linux/mutex.h>
 #include <linux/io.h>
 
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <asm/mpc5xxx.h>
 #include <asm/mpc5121.h>

arch/powerpc/platforms/512x/pdm360ng.c

@@ -14,6 +14,8 @@
 
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/machdep.h>

arch/powerpc/platforms/82xx/mpc8272_ads.c

@@ -16,6 +16,8 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <linux/io.h>
 

arch/powerpc/platforms/82xx/pq2fads.c

@@ -15,6 +15,8 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/io.h>

arch/powerpc/platforms/83xx/suspend.c

@@ -20,6 +20,8 @@
 #include <linux/freezer.h>
 #include <linux/suspend.h>
 #include <linux/fsl_devices.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/export.h>
 

arch/powerpc/platforms/85xx/c293pcie.c

@@ -11,6 +11,7 @@
 
 #include <linux/stddef.h>
 #include <linux/kernel.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/machdep.h>

arch/powerpc/platforms/85xx/common.c

@@ -5,6 +5,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <sysdev/cpm2_pic.h>

arch/powerpc/platforms/85xx/ppa8548.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/reboot.h>
 #include <linux/seq_file.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/machdep.h>

arch/powerpc/platforms/85xx/sgy_cts1000.c

@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/of_gpio.h>
+#include <linux/of_irq.h>
 #include <linux/workqueue.h>
 #include <linux/reboot.h>
 #include <linux/interrupt.h>

arch/powerpc/platforms/85xx/smp.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/kexec.h>
 #include <linux/highmem.h>
 #include <linux/cpu.h>

arch/powerpc/platforms/85xx/socrates_fpga_pic.c

@@ -9,6 +9,8 @@
  */
 
 #include <linux/irq.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/io.h>
 

arch/powerpc/platforms/86xx/pic.c

@@ -10,6 +10,7 @@
 #include <linux/stddef.h>
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/mpic.h>

arch/powerpc/platforms/8xx/ep88xc.c

@@ -10,6 +10,8 @@
  */
 
 #include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/machdep.h>

arch/powerpc/platforms/8xx/mpc86xads_setup.c

@@ -15,6 +15,8 @@
  */
 
 #include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/io.h>

arch/powerpc/platforms/8xx/mpc885ads_setup.c

@@ -25,6 +25,8 @@
 #include <linux/fs_uart_pd.h>
 #include <linux/fsl_devices.h>
 #include <linux/mii.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/delay.h>

arch/powerpc/platforms/8xx/tqm8xx_setup.c

@@ -28,6 +28,7 @@
 #include <linux/fs_uart_pd.h>
 #include <linux/fsl_devices.h>
 #include <linux/mii.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
 #include <asm/delay.h>

arch/powerpc/platforms/cell/celleb_scc_pciex.c

@@ -486,7 +486,6 @@ static __init int celleb_setup_pciex(struct device_node *node,
 				     struct pci_controller *phb)
 {
 	struct resource	r;
-	struct of_irq oirq;
 	int virq;
 
 	/* SMMIO registers; used inside this file */
@@ -507,12 +506,11 @@ static __init int celleb_setup_pciex(struct device_node *node,
 	phb->ops = &scc_pciex_pci_ops;
 
 	/* internal interrupt handler */
-	if (of_irq_map_one(node, 1, &oirq)) {
+	virq = irq_of_parse_and_map(node, 1);
+	if (!virq) {
 		pr_err("PCIEXC:Failed to map irq\n");
 		goto error;
 	}
-	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
 	if (request_irq(virq, pciex_handle_internal_irq,
 			0, "pciex", (void *)phb)) {
 		pr_err("PCIEXC:Failed to request irq\n");

arch/powerpc/platforms/cell/celleb_scc_sio.c

@@ -45,7 +45,7 @@ static int __init txx9_serial_init(void)
 	struct device_node *node;
 	int i;
 	struct uart_port req;
-	struct of_irq irq;
+	struct of_phandle_args irq;
 	struct resource res;
 
 	for_each_compatible_node(node, "serial", "toshiba,sio-scc") {
@@ -53,7 +53,7 @@ static int __init txx9_serial_init(void)
 			if (!(txx9_serial_bitmap & (1<<i)))
 				continue;
 
-			if (of_irq_map_one(node, i, &irq))
+			if (of_irq_parse_one(node, i, &irq))
 				continue;
 			if (of_address_to_resource(node,
 				txx9_scc_tab[i].index, &res))
@@ -66,8 +66,7 @@ static int __init txx9_serial_init(void)
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
 			req.membase = ioremap(req.mapbase, 0x24);
 #endif
-			req.irq = irq_create_of_mapping(irq.controller,
-				irq.specifier, irq.size);
+			req.irq = irq_create_of_mapping(&irq);
 			req.flags |= UPF_IOREMAP | UPF_BUGGY_UART
 				/*HAVE_CTS_LINE*/;
 			req.uartclk = 83300000;

arch/powerpc/platforms/cell/spider-pic.c

@@ -235,12 +235,9 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
 	/* First, we check whether we have a real "interrupts" in the device
 	 * tree in case the device-tree is ever fixed
 	 */
-	struct of_irq oirq;
-	if (of_irq_map_one(pic->host->of_node, 0, &oirq) == 0) {
-		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-					     oirq.size);
+	virq = irq_of_parse_and_map(pic->host->of_node, 0);
+	if (virq)
 		return virq;
-	}
 
 	/* Now do the horrible hacks */
 	tmp = of_get_property(pic->host->of_node, "#interrupt-cells", NULL);

arch/powerpc/platforms/cell/spu_manage.c

@@ -177,21 +177,20 @@ static int __init spu_map_device_old(struct spu *spu)
 
 static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
 {
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 	int ret;
 	int i;
 
 	for (i=0; i < 3; i++) {
-		ret = of_irq_map_one(np, i, &oirq);
+		ret = of_irq_parse_one(np, i, &oirq);
 		if (ret) {
 			pr_debug("spu_new: failed to get irq %d\n", i);
 			goto err;
 		}
 		ret = -EINVAL;
-		pr_debug("  irq %d no 0x%x on %s\n", i, oirq.specifier[0],
-			 oirq.controller->full_name);
-		spu->irqs[i] = irq_create_of_mapping(oirq.controller,
-					oirq.specifier, oirq.size);
+		pr_debug("  irq %d no 0x%x on %s\n", i, oirq.args[0],
+			 oirq.np->full_name);
+		spu->irqs[i] = irq_create_of_mapping(&oirq);
 		if (spu->irqs[i] == NO_IRQ) {
 			pr_debug("spu_new: failed to map it !\n");
 			goto err;
@@ -200,7 +199,7 @@ static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
 	return 0;
 
 err:
-	pr_debug("failed to map irq %x for spu %s\n", *oirq.specifier,
+	pr_debug("failed to map irq %x for spu %s\n", *oirq.args,
 		spu->name);
 	for (; i >= 0; i--) {
 		if (spu->irqs[i] != NO_IRQ)

arch/powerpc/platforms/embedded6xx/flipper-pic.c

@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <asm/io.h>
 
 #include "flipper-pic.h"

arch/powerpc/platforms/embedded6xx/hlwd-pic.c

@@ -18,6 +18,8 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <asm/io.h>
 
 #include "hlwd-pic.h"

arch/powerpc/platforms/fsl_uli1575.c

@@ -321,8 +321,7 @@ static void hpcd_final_uli5288(struct pci_dev *dev)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
 	struct device_node *hosenode = hose ? hose->dn : NULL;
-	struct of_irq oirq;
-	int virq, pin = 2;
+	struct of_phandle_args oirq;
 	u32 laddr[3];
 
 	if (!machine_is(mpc86xx_hpcd))
@@ -331,12 +330,13 @@ static void hpcd_final_uli5288(struct pci_dev *dev)
 	if (!hosenode)
 		return;
 
+	oirq.np = hosenode;
+	oirq.args[0] = 2;
+	oirq.args_count = 1;
 	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
 	laddr[1] = laddr[2] = 0;
-	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
-	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
-	dev->irq = virq;
+	of_irq_parse_raw(laddr, &oirq);
+	dev->irq = irq_create_of_mapping(&oirq);
 }
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575);

arch/powerpc/platforms/pasemi/gpio_mdio.c

@@ -30,6 +30,7 @@
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <linux/phy.h>
+#include <linux/of_address.h>
 #include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 

arch/powerpc/platforms/powermac/pfunc_base.c

@@ -4,6 +4,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/of_irq.h>
 
 #include <asm/pmac_feature.h>
 #include <asm/pmac_pfunc.h>

arch/powerpc/platforms/powermac/pic.c

@@ -393,8 +393,8 @@ static void __init pmac_pic_probe_oldstyle(void)
 #endif
 }
 
-int of_irq_map_oldworld(struct device_node *device, int index,
-			struct of_irq *out_irq)
+int of_irq_parse_oldworld(struct device_node *device, int index,
+			struct of_phandle_args *out_irq)
 {
 	const u32 *ints = NULL;
 	int intlen;
@@ -422,9 +422,9 @@ int of_irq_map_oldworld(struct device_node *device, int index,
 	if (index >= intlen)
 		return -EINVAL;
 
-	out_irq->controller = NULL;
-	out_irq->specifier[0] = ints[index];
-	out_irq->size = 1;
+	out_irq->np = NULL;
+	out_irq->args[0] = ints[index];
+	out_irq->args_count = 1;
 
 	return 0;
 }

arch/powerpc/platforms/powernv/opal-lpc.c

@@ -17,6 +17,7 @@
 #include <asm/firmware.h>
 #include <asm/xics.h>
 #include <asm/opal.h>
+#include <asm/prom.h>
 
 static int opal_lpc_chip_id = -1;
 

arch/powerpc/platforms/powernv/opal.c

@@ -13,6 +13,7 @@
 
 #include <linux/types.h>
 #include <linux/of.h>
+#include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 #include <linux/interrupt.h>
 #include <linux/notifier.h>

arch/powerpc/platforms/powernv/setup.c

@@ -23,6 +23,7 @@
 #include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/of.h>
+#include <linux/of_fdt.h>
 #include <linux/interrupt.h>
 #include <linux/bug.h>
 

arch/powerpc/platforms/pseries/event_sources.c

@@ -25,7 +25,7 @@ void request_event_sources_irqs(struct device_node *np,
 				const char *name)
 {
 	int i, index, count = 0;
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 	const u32 *opicprop;
 	unsigned int opicplen;
 	unsigned int virqs[16];
@@ -55,13 +55,11 @@ void request_event_sources_irqs(struct device_node *np,
 	/* Else use normal interrupt tree parsing */
 	else {
 		/* First try to do a proper OF tree parsing */
-		for (index = 0; of_irq_map_one(np, index, &oirq) == 0;
+		for (index = 0; of_irq_parse_one(np, index, &oirq) == 0;
 		     index++) {
 			if (count > 15)
 				break;
-			virqs[count] = irq_create_of_mapping(oirq.controller,
-							    oirq.specifier,
-							    oirq.size);
+			virqs[count] = irq_create_of_mapping(&oirq);
 			if (virqs[count] == NO_IRQ) {
 				pr_err("event-sources: Unable to allocate "
 				       "interrupt number for %s\n",

arch/powerpc/platforms/pseries/hotplug-memory.c

@@ -10,12 +10,14 @@
  */
 
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/memblock.h>
 #include <linux/vmalloc.h>
 #include <linux/memory.h>
 
 #include <asm/firmware.h>
 #include <asm/machdep.h>
+#include <asm/prom.h>
 #include <asm/sparsemem.h>
 
 static unsigned long get_memblock_size(void)

arch/powerpc/sysdev/cpm_common.c

@@ -22,6 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/export.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/slab.h>
 
 #include <asm/udbg.h>

arch/powerpc/sysdev/ehv_pic.c

@@ -19,6 +19,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>

arch/powerpc/sysdev/fsl_gtm.c

@@ -19,6 +19,8 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
 #include <linux/slab.h>
@@ -401,16 +403,15 @@ static int __init fsl_gtm_init(void)
 		gtm->clock = *clock;
 
 		for (i = 0; i < ARRAY_SIZE(gtm->timers); i++) {
-			int ret;
-			struct resource irq;
+			unsigned int irq;
 
-			ret = of_irq_to_resource(np, i, &irq);
-			if (ret == NO_IRQ) {
+			irq = irq_of_parse_and_map(np, i);
+			if (irq == NO_IRQ) {
 				pr_err("%s: not enough interrupts specified\n",
 				       np->full_name);
 				goto err;
 			}
-			gtm->timers[i].irq = irq.start;
+			gtm->timers[i].irq = irq;
 			gtm->timers[i].gtm = gtm;
 		}
 

arch/powerpc/sysdev/fsl_pmc.c

@@ -18,6 +18,7 @@
 #include <linux/suspend.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 
 struct pmc_regs {

arch/powerpc/sysdev/fsl_rio.c

@@ -28,6 +28,8 @@
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/delay.h>
 #include <linux/slab.h>

arch/powerpc/sysdev/fsl_rmu.c

@@ -27,6 +27,7 @@
 #include <linux/types.h>
 #include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
 

arch/powerpc/sysdev/mpic.c

@@ -535,7 +535,7 @@ static void __init mpic_scan_ht_pic(struct mpic *mpic, u8 __iomem *devbase,
 		mpic->fixups[irq].data = readl(base + 4) | 0x80000000;
 	}
 }
- 
+
 
 static void __init mpic_scan_ht_pics(struct mpic *mpic)
 {
@@ -1481,7 +1481,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	 * as a default instead of the value read from the HW.
 	 */
 	last_irq = (greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
-				>> MPIC_GREG_FEATURE_LAST_SRC_SHIFT;	
+				>> MPIC_GREG_FEATURE_LAST_SRC_SHIFT;
 	if (isu_size)
 		last_irq = isu_size  * MPIC_MAX_ISU - 1;
 	of_property_read_u32(mpic->node, "last-interrupt-source", &last_irq);
@@ -1631,7 +1631,7 @@ void __init mpic_init(struct mpic *mpic)
 			/* start with vector = source number, and masked */
 			u32 vecpri = MPIC_VECPRI_MASK | i |
 				(8 << MPIC_VECPRI_PRIORITY_SHIFT);
-		
+
 			/* check if protected */
 			if (mpic->protected && test_bit(i, mpic->protected))
 				continue;
@@ -1640,7 +1640,7 @@ void __init mpic_init(struct mpic *mpic)
 			mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << cpu);
 		}
 	}
-	
+
 	/* Init spurious vector */
 	mpic_write(mpic->gregs, MPIC_INFO(GREG_SPURIOUS), mpic->spurious_vec);
 

arch/powerpc/sysdev/mpic_msgr.c

@@ -237,15 +237,13 @@ static int mpic_msgr_probe(struct platform_device *dev)
 		raw_spin_lock_init(&msgr->lock);
 
 		if (receive_mask & (1 << i)) {
-			struct resource irq;
-
-			if (of_irq_to_resource(np, irq_index, &irq) == NO_IRQ) {
+			msgr->irq = irq_of_parse_and_map(np, irq_index);
+			if (msgr->irq == NO_IRQ) {
 				dev_err(&dev->dev,
 						"Missing interrupt specifier");
 				kfree(msgr);
 				return -EFAULT;
 			}
-			msgr->irq = irq.start;
 			irq_index += 1;
 		} else {
 			msgr->irq = NO_IRQ;

arch/powerpc/sysdev/mpic_msi.c

@@ -35,7 +35,7 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
 	const struct irq_domain_ops *ops = mpic->irqhost->ops;
 	struct device_node *np;
 	int flags, index, i;
-	struct of_irq oirq;
+	struct of_phandle_args oirq;
 
 	pr_debug("mpic: found U3, guessing msi allocator setup\n");
 
@@ -63,9 +63,9 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic)
 		pr_debug("mpic: mapping hwirqs for %s\n", np->full_name);
 
 		index = 0;
-		while (of_irq_map_one(np, index++, &oirq) == 0) {
-			ops->xlate(mpic->irqhost, NULL, oirq.specifier,
-						oirq.size, &hwirq, &flags);
+		while (of_irq_parse_one(np, index++, &oirq) == 0) {
+			ops->xlate(mpic->irqhost, NULL, oirq.args,
+						oirq.args_count, &hwirq, &flags);
 			msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, hwirq);
 		}
 	}

arch/powerpc/sysdev/mpic_timer.c

@@ -19,7 +19,9 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/syscore_ops.h>
 #include <sysdev/fsl_soc.h>
 #include <asm/io.h>

arch/powerpc/sysdev/of_rtc.c

@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/init.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
 

arch/powerpc/sysdev/ppc4xx_ocm.c

@@ -26,6 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/dma-mapping.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <asm/rheap.h>
 #include <asm/ppc4xx_ocm.h>
 #include <linux/slab.h>