Commit 142a0e11 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

Merge tag 'docs-next' of git://git.lwn.net/linux.git into patchwork

Merge back from docs-next in order to get the cdomain extension.

With such extension, the number of warnings when building docs
in nitpick mode reduced from 22 to 2 warnings.

* docs-next/docs-next:
  docs/driver-model: fix typo
  DMA-API-HOWTO: <asm/generic/scatterlist.h> is no more
  doc-rst:c-domain: function-like macros arguments
  doc-rst:c-domain: fix sphinx version incompatibility
  Documentation/filesystems: Fixed typo
  docs: Don't format internal MPT docs
  docs: split up serial-interfaces.rst
  docs: Pull the HSI documentation together
  docs: Special-case function-pointer parameters in kernel-doc
  docs: make kernel-doc handle varargs properly
  x86: fix memory ranges in mm documentation
  documentation/scsi: Remove nodisconnect parameter
  doc: ioctl: Add some clarifications to botching-up-ioctls
  docs: split up the driver book
  Docs: sphinxify device-drivers.tmpl
parents 6ff7b7af 2cfd100b
......@@ -931,10 +931,8 @@ to "Closing".
1) Struct scatterlist requirements.
Don't invent the architecture specific struct scatterlist; just use
<asm-generic/scatterlist.h>. You need to enable
CONFIG_NEED_SG_DMA_LENGTH if the architecture supports IOMMUs
(including software IOMMU).
You need to enable CONFIG_NEED_SG_DMA_LENGTH if the architecture
supports IOMMUs (including software IOMMU).
2) ARCH_DMA_MINALIGN
......
......@@ -6,7 +6,7 @@
# To add a new book the only step required is to add the book to the
# list of DOCBOOKS.
DOCBOOKS := z8530book.xml device-drivers.xml \
DOCBOOKS := z8530book.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
writing_usb_driver.xml networking.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
......
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
<book id="LinuxDriversAPI">
<bookinfo>
<title>Linux Device Drivers</title>
<legalnotice>
<para>
This documentation is free software; you can redistribute
it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later
version.
</para>
<para>
This program is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
</para>
<para>
You should have received a copy of the GNU General Public
License along with this program; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA
</para>
<para>
For more details see the file COPYING in the source
distribution of Linux.
</para>
</legalnotice>
</bookinfo>
<toc></toc>
<chapter id="Basics">
<title>Driver Basics</title>
<sect1><title>Driver Entry and Exit points</title>
!Iinclude/linux/init.h
</sect1>
<sect1><title>Atomic and pointer manipulation</title>
!Iarch/x86/include/asm/atomic.h
</sect1>
<sect1><title>Delaying, scheduling, and timer routines</title>
!Iinclude/linux/sched.h
!Ekernel/sched/core.c
!Ikernel/sched/cpupri.c
!Ikernel/sched/fair.c
!Iinclude/linux/completion.h
!Ekernel/time/timer.c
</sect1>
<sect1><title>Wait queues and Wake events</title>
!Iinclude/linux/wait.h
!Ekernel/sched/wait.c
</sect1>
<sect1><title>High-resolution timers</title>
!Iinclude/linux/ktime.h
!Iinclude/linux/hrtimer.h
!Ekernel/time/hrtimer.c
</sect1>
<sect1><title>Workqueues and Kevents</title>
!Iinclude/linux/workqueue.h
!Ekernel/workqueue.c
</sect1>
<sect1><title>Internal Functions</title>
!Ikernel/exit.c
!Ikernel/signal.c
!Iinclude/linux/kthread.h
!Ekernel/kthread.c
</sect1>
<sect1><title>Kernel objects manipulation</title>
<!--
X!Iinclude/linux/kobject.h
-->
!Elib/kobject.c
</sect1>
<sect1><title>Kernel utility functions</title>
!Iinclude/linux/kernel.h
!Ekernel/printk/printk.c
!Ekernel/panic.c
!Ekernel/sys.c
!Ekernel/rcu/srcu.c
!Ekernel/rcu/tree.c
!Ekernel/rcu/tree_plugin.h
!Ekernel/rcu/update.c
</sect1>
<sect1><title>Device Resource Management</title>
!Edrivers/base/devres.c
</sect1>
</chapter>
<chapter id="devdrivers">
<title>Device drivers infrastructure</title>
<sect1><title>The Basic Device Driver-Model Structures </title>
!Iinclude/linux/device.h
</sect1>
<sect1><title>Device Drivers Base</title>
!Idrivers/base/init.c
!Edrivers/base/driver.c
!Edrivers/base/core.c
!Edrivers/base/syscore.c
!Edrivers/base/class.c
!Idrivers/base/node.c
!Edrivers/base/firmware_class.c
!Edrivers/base/transport_class.c
<!-- Cannot be included, because
attribute_container_add_class_device_adapter
and attribute_container_classdev_to_container
exceed allowed 44 characters maximum
X!Edrivers/base/attribute_container.c
-->
!Edrivers/base/dd.c
<!--
X!Edrivers/base/interface.c
-->
!Iinclude/linux/platform_device.h
!Edrivers/base/platform.c
!Edrivers/base/bus.c
</sect1>
<sect1>
<title>Buffer Sharing and Synchronization</title>
<para>
The dma-buf subsystem provides the framework for sharing buffers
for hardware (DMA) access across multiple device drivers and
subsystems, and for synchronizing asynchronous hardware access.
</para>
<para>
This is used, for example, by drm "prime" multi-GPU support, but
is of course not limited to GPU use cases.
</para>
<para>
The three main components of this are: (1) dma-buf, representing
a sg_table and exposed to userspace as a file descriptor to allow
passing between devices, (2) fence, which provides a mechanism
to signal when one device as finished access, and (3) reservation,
which manages the shared or exclusive fence(s) associated with
the buffer.
</para>
<sect2><title>dma-buf</title>
!Edrivers/dma-buf/dma-buf.c
!Iinclude/linux/dma-buf.h
</sect2>
<sect2><title>reservation</title>
!Pdrivers/dma-buf/reservation.c Reservation Object Overview
!Edrivers/dma-buf/reservation.c
!Iinclude/linux/reservation.h
</sect2>
<sect2><title>fence</title>
!Edrivers/dma-buf/fence.c
!Iinclude/linux/fence.h
!Edrivers/dma-buf/seqno-fence.c
!Iinclude/linux/seqno-fence.h
!Edrivers/dma-buf/fence-array.c
!Iinclude/linux/fence-array.h
!Edrivers/dma-buf/reservation.c
!Iinclude/linux/reservation.h
!Edrivers/dma-buf/sync_file.c
!Iinclude/linux/sync_file.h
</sect2>
</sect1>
<sect1><title>Device Drivers DMA Management</title>
!Edrivers/base/dma-coherent.c
!Edrivers/base/dma-mapping.c
</sect1>
<sect1><title>Device Drivers Power Management</title>
!Edrivers/base/power/main.c
</sect1>
<sect1><title>Device Drivers ACPI Support</title>
<!-- Internal functions only
X!Edrivers/acpi/sleep/main.c
X!Edrivers/acpi/sleep/wakeup.c
X!Edrivers/acpi/motherboard.c
X!Edrivers/acpi/bus.c
-->
!Edrivers/acpi/scan.c
!Idrivers/acpi/scan.c
<!-- No correct structured comments
X!Edrivers/acpi/pci_bind.c
-->
</sect1>
<sect1><title>Device drivers PnP support</title>
!Idrivers/pnp/core.c
<!-- No correct structured comments
X!Edrivers/pnp/system.c
-->
!Edrivers/pnp/card.c
!Idrivers/pnp/driver.c
!Edrivers/pnp/manager.c
!Edrivers/pnp/support.c
</sect1>
<sect1><title>Userspace IO devices</title>
!Edrivers/uio/uio.c
!Iinclude/linux/uio_driver.h
</sect1>
</chapter>
<chapter id="parportdev">
<title>Parallel Port Devices</title>
!Iinclude/linux/parport.h
!Edrivers/parport/ieee1284.c
!Edrivers/parport/share.c
!Idrivers/parport/daisy.c
</chapter>
<chapter id="message_devices">
<title>Message-based devices</title>
<sect1><title>Fusion message devices</title>
!Edrivers/message/fusion/mptbase.c
!Idrivers/message/fusion/mptbase.c
!Edrivers/message/fusion/mptscsih.c
!Idrivers/message/fusion/mptscsih.c
!Idrivers/message/fusion/mptctl.c
!Idrivers/message/fusion/mptspi.c
!Idrivers/message/fusion/mptfc.c
!Idrivers/message/fusion/mptlan.c
</sect1>
</chapter>
<chapter id="snddev">
<title>Sound Devices</title>
!Iinclude/sound/core.h
!Esound/sound_core.c
!Iinclude/sound/pcm.h
!Esound/core/pcm.c
!Esound/core/device.c
!Esound/core/info.c
!Esound/core/rawmidi.c
!Esound/core/sound.c
!Esound/core/memory.c
!Esound/core/pcm_memory.c
!Esound/core/init.c
!Esound/core/isadma.c
!Esound/core/control.c
!Esound/core/pcm_lib.c
!Esound/core/hwdep.c
!Esound/core/pcm_native.c
!Esound/core/memalloc.c
<!-- FIXME: Removed for now since no structured comments in source
X!Isound/sound_firmware.c
-->
</chapter>
<chapter id="uart16x50">
<title>16x50 UART Driver</title>
!Edrivers/tty/serial/serial_core.c
!Edrivers/tty/serial/8250/8250_core.c
</chapter>
<chapter id="fbdev">
<title>Frame Buffer Library</title>
<para>
The frame buffer drivers depend heavily on four data structures.
These structures are declared in include/linux/fb.h. They are
fb_info, fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs.
The last three can be made available to and from userland.
</para>
<para>
fb_info defines the current state of a particular video card.
Inside fb_info, there exists a fb_ops structure which is a
collection of needed functions to make fbdev and fbcon work.
fb_info is only visible to the kernel.
</para>
<para>
fb_var_screeninfo is used to describe the features of a video card
that are user defined. With fb_var_screeninfo, things such as
depth and the resolution may be defined.
</para>
<para>
The next structure is fb_fix_screeninfo. This defines the
properties of a card that are created when a mode is set and can't
be changed otherwise. A good example of this is the start of the
frame buffer memory. This "locks" the address of the frame buffer
memory, so that it cannot be changed or moved.
</para>
<para>
The last structure is fb_monospecs. In the old API, there was
little importance for fb_monospecs. This allowed for forbidden things
such as setting a mode of 800x600 on a fix frequency monitor. With
the new API, fb_monospecs prevents such things, and if used
correctly, can prevent a monitor from being cooked. fb_monospecs
will not be useful until kernels 2.5.x.
</para>
<sect1><title>Frame Buffer Memory</title>
!Edrivers/video/fbdev/core/fbmem.c
</sect1>
<!--
<sect1><title>Frame Buffer Console</title>
X!Edrivers/video/console/fbcon.c
</sect1>
-->
<sect1><title>Frame Buffer Colormap</title>
!Edrivers/video/fbdev/core/fbcmap.c
</sect1>
<!-- FIXME:
drivers/video/fbgen.c has no docs, which stuffs up the sgml. Comment
out until somebody adds docs. KAO
<sect1><title>Frame Buffer Generic Functions</title>
X!Idrivers/video/fbgen.c
</sect1>
KAO -->
<sect1><title>Frame Buffer Video Mode Database</title>
!Idrivers/video/fbdev/core/modedb.c
!Edrivers/video/fbdev/core/modedb.c
</sect1>
<sect1><title>Frame Buffer Macintosh Video Mode Database</title>
!Edrivers/video/fbdev/macmodes.c
</sect1>
<sect1><title>Frame Buffer Fonts</title>
<para>
Refer to the file lib/fonts/fonts.c for more information.
</para>
<!-- FIXME: Removed for now since no structured comments in source
X!Ilib/fonts/fonts.c
-->
</sect1>
</chapter>
<chapter id="input_subsystem">
<title>Input Subsystem</title>
<sect1><title>Input core</title>
!Iinclude/linux/input.h
!Edrivers/input/input.c
!Edrivers/input/ff-core.c
!Edrivers/input/ff-memless.c
</sect1>
<sect1><title>Multitouch Library</title>
!Iinclude/linux/input/mt.h
!Edrivers/input/input-mt.c
</sect1>
<sect1><title>Polled input devices</title>
!Iinclude/linux/input-polldev.h
!Edrivers/input/input-polldev.c
</sect1>
<sect1><title>Matrix keyboards/keypads</title>
!Iinclude/linux/input/matrix_keypad.h
</sect1>
<sect1><title>Sparse keymap support</title>
!Iinclude/linux/input/sparse-keymap.h
!Edrivers/input/sparse-keymap.c
</sect1>
</chapter>
<chapter id="spi">
<title>Serial Peripheral Interface (SPI)</title>
<para>
SPI is the "Serial Peripheral Interface", widely used with
embedded systems because it is a simple and efficient
interface: basically a multiplexed shift register.
Its three signal wires hold a clock (SCK, often in the range
of 1-20 MHz), a "Master Out, Slave In" (MOSI) data line, and
a "Master In, Slave Out" (MISO) data line.
SPI is a full duplex protocol; for each bit shifted out the
MOSI line (one per clock) another is shifted in on the MISO line.
Those bits are assembled into words of various sizes on the
way to and from system memory.
An additional chipselect line is usually active-low (nCS);
four signals are normally used for each peripheral, plus
sometimes an interrupt.
</para>
<para>
The SPI bus facilities listed here provide a generalized
interface to declare SPI busses and devices, manage them
according to the standard Linux driver model, and perform
input/output operations.
At this time, only "master" side interfaces are supported,
where Linux talks to SPI peripherals and does not implement
such a peripheral itself.
(Interfaces to support implementing SPI slaves would
necessarily look different.)
</para>
<para>
The programming interface is structured around two kinds of driver,
and two kinds of device.
A "Controller Driver" abstracts the controller hardware, which may
be as simple as a set of GPIO pins or as complex as a pair of FIFOs
connected to dual DMA engines on the other side of the SPI shift
register (maximizing throughput). Such drivers bridge between
whatever bus they sit on (often the platform bus) and SPI, and
expose the SPI side of their device as a
<structname>struct spi_master</structname>.
SPI devices are children of that master, represented as a
<structname>struct spi_device</structname> and manufactured from
<structname>struct spi_board_info</structname> descriptors which
are usually provided by board-specific initialization code.
A <structname>struct spi_driver</structname> is called a
"Protocol Driver", and is bound to a spi_device using normal
driver model calls.
</para>
<para>
The I/O model is a set of queued messages. Protocol drivers
submit one or more <structname>struct spi_message</structname>
objects, which are processed and completed asynchronously.
(There are synchronous wrappers, however.) Messages are
built from one or more <structname>struct spi_transfer</structname>
objects, each of which wraps a full duplex SPI transfer.
A variety of protocol tweaking options are needed, because
different chips adopt very different policies for how they
use the bits transferred with SPI.
</para>
!Iinclude/linux/spi/spi.h
!Fdrivers/spi/spi.c spi_register_board_info
!Edrivers/spi/spi.c
</chapter>
<chapter id="i2c">
<title>I<superscript>2</superscript>C and SMBus Subsystem</title>
<para>
I<superscript>2</superscript>C (or without fancy typography, "I2C")
is an acronym for the "Inter-IC" bus, a simple bus protocol which is
widely used where low data rate communications suffice.
Since it's also a licensed trademark, some vendors use another
name (such as "Two-Wire Interface", TWI) for the same bus.
I2C only needs two signals (SCL for clock, SDA for data), conserving
board real estate and minimizing signal quality issues.
Most I2C devices use seven bit addresses, and bus speeds of up
to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
found wide use.
I2C is a multi-master bus; open drain signaling is used to
arbitrate between masters, as well as to handshake and to
synchronize clocks from slower clients.
</para>
<para>
The Linux I2C programming interfaces support only the master
side of bus interactions, not the slave side.
The programming interface is structured around two kinds of driver,
and two kinds of device.
An I2C "Adapter Driver" abstracts the controller hardware; it binds
to a physical device (perhaps a PCI device or platform_device) and
exposes a <structname>struct i2c_adapter</structname> representing
each I2C bus segment it manages.
On each I2C bus segment will be I2C devices represented by a
<structname>struct i2c_client</structname>. Those devices will
be bound to a <structname>struct i2c_driver</structname>,
which should follow the standard Linux driver model.
(At this writing, a legacy model is more widely used.)
There are functions to perform various I2C protocol operations; at
this writing all such functions are usable only from task context.
</para>
<para>
The System Management Bus (SMBus) is a sibling protocol. Most SMBus
systems are also I2C conformant. The electrical constraints are
tighter for SMBus, and it standardizes particular protocol messages
and idioms. Controllers that support I2C can also support most
SMBus operations, but SMBus controllers don't support all the protocol
options that an I2C controller will.
There are functions to perform various SMBus protocol operations,
either using I2C primitives or by issuing SMBus commands to
i2c_adapter devices which don't support those I2C operations.
</para>
!Iinclude/linux/i2c.h
!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
!Edrivers/i2c/i2c-core.c
</chapter>
<chapter id="hsi">
<title>High Speed Synchronous Serial Interface (HSI)</title>
<para>
High Speed Synchronous Serial Interface (HSI) is a
serial interface mainly used for connecting application
engines (APE) with cellular modem engines (CMT) in cellular
handsets.
HSI provides multiplexing for up to 16 logical channels,
low-latency and full duplex communication.
</para>
!Iinclude/linux/hsi/hsi.h
!Edrivers/hsi/hsi_core.c
</chapter>
<chapter id="pwm">
<title>Pulse-Width Modulation (PWM)</title>
<para>
Pulse-width modulation is a modulation technique primarily used to
control power supplied to electrical devices.
</para>
<para>
The PWM framework provides an abstraction for providers and consumers
of PWM signals. A controller that provides one or more PWM signals is
registered as <structname>struct pwm_chip</structname>. Providers are
expected to embed this structure in a driver-specific structure. This
structure contains fields that describe a particular chip.
</para>
<para>
A chip exposes one or more PWM signal sources, each of which exposed
as a <structname>struct pwm_device</structname>. Operations can be
performed on PWM devices to control the period, duty cycle, polarity
and active state of the signal.
</para>
<para>
Note that PWM devices are exclusive resources: they can always only be
used by one consumer at a time.
</para>
!Iinclude/linux/pwm.h
!Edrivers/pwm/core.c
</chapter>
</book>
Driver Basics
=============
Driver Entry and Exit points
----------------------------
.. kernel-doc:: include/linux/init.h
:internal:
Atomic and pointer manipulation
-------------------------------
.. kernel-doc:: arch/x86/include/asm/atomic.h
:internal:
Delaying, scheduling, and timer routines
----------------------------------------
.. kernel-doc:: include/linux/sched.h
:internal:
.. kernel-doc:: kernel/sched/core.c
:export:
.. kernel-doc:: kernel/sched/cpupri.c
:internal:
.. kernel-doc:: kernel/sched/fair.c
:internal:
.. kernel-doc:: include/linux/completion.h
:internal:
.. kernel-doc:: kernel/time/timer.c
:export:
Wait queues and Wake events
---------------------------
.. kernel-doc:: include/linux/wait.h
:internal:
.. kernel-doc:: kernel/sched/wait.c
:export:
High-resolution timers
----------------------
.. kernel-doc:: include/linux/ktime.h
:internal:
.. kernel-doc:: include/linux/hrtimer.h
:internal:
.. kernel-doc:: kernel/time/hrtimer.c
:export:
Workqueues and Kevents
----------------------
.. kernel-doc:: include/linux/workqueue.h
:internal:
.. kernel-doc:: kernel/workqueue.c
:export:
Internal Functions
------------------
.. kernel-doc:: kernel/exit.c
:internal:
.. kernel-doc:: kernel/signal.c
:internal:
.. kernel-doc:: include/linux/kthread.h
:internal:
.. kernel-doc:: kernel/kthread.c
:export:
Kernel objects manipulation
---------------------------
.. kernel-doc:: lib/kobject.c
:export:
Kernel utility functions
------------------------
.. kernel-doc:: include/linux/kernel.h
:internal:
.. kernel-doc:: kernel/printk/printk.c
:export:
.. kernel-doc:: kernel/panic.c
:export:
.. kernel-doc:: kernel/sys.c
:export:
.. kernel-doc:: kernel/rcu/srcu.c
:export:
.. kernel-doc:: kernel/rcu/tree.c
:export:
.. kernel-doc:: kernel/rcu/tree_plugin.h
:export:
.. kernel-doc:: kernel/rcu/update.c
:export:
Device Resource Management
--------------------------
.. kernel-doc:: drivers/base/devres.c
:export:
Frame Buffer Library
====================
The frame buffer drivers depend heavily on four data structures. These
structures are declared in include/linux/fb.h. They are fb_info,
fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs. The last
three can be made available to and from userland.
fb_info defines the current state of a particular video card. Inside
fb_info, there exists a fb_ops structure which is a collection of
needed functions to make fbdev and fbcon work. fb_info is only visible
to the kernel.
fb_var_screeninfo is used to describe the features of a video card
that are user defined. With fb_var_screeninfo, things such as depth
and the resolution may be defined.
The next structure is fb_fix_screeninfo. This defines the properties
of a card that are created when a mode is set and can't be changed
otherwise. A good example of this is the start of the frame buffer
memory. This "locks" the address of the frame buffer memory, so that it
cannot be changed or moved.
The last structure is fb_monospecs. In the old API, there was little
importance for fb_monospecs. This allowed for forbidden things such as
setting a mode of 800x600 on a fix frequency monitor. With the new API,
fb_monospecs prevents such things, and if used correctly, can prevent a
monitor from being cooked. fb_monospecs will not be useful until
kernels 2.5.x.
Frame Buffer Memory
-------------------
.. kernel-doc:: drivers/video/fbdev/core/fbmem.c
:export:
Frame Buffer Colormap
---------------------
.. kernel-doc:: drivers/video/fbdev/core/fbcmap.c
:export:
Frame Buffer Video Mode Database
--------------------------------
.. kernel-doc:: drivers/video/fbdev/core/modedb.c
:internal:
.. kernel-doc:: drivers/video/fbdev/core/modedb.c
:export:
Frame Buffer Macintosh Video Mode Database
------------------------------------------
.. kernel-doc:: drivers/video/fbdev/macmodes.c
:export:
Frame Buffer Fonts
------------------
Refer to the file lib/fonts/fonts.c for more information.
HSI - High-speed Synchronous Serial Interface
High Speed Synchronous Serial Interface (HSI)
=============================================
1. Introduction
~~~~~~~~~~~~~~~
Introduction
---------------
High Speed Syncronous Interface (HSI) is a fullduplex, low latency protocol,
that is optimized for die-level interconnect between an Application Processor
......@@ -17,25 +18,27 @@ signal can be used to wakeup the chips from standby modes. The signals are
commonly prefixed by AC for signals going from the application die to the
cellular die and CA for signals going the other way around.
+------------+ +---------------+
| Cellular | | Application |
| Die | | Die |
| | - - - - - - CAWAKE - - - - - - >| |
| T|------------ CADATA ------------>|R |
| X|------------ CAFLAG ------------>|X |
| |<----------- ACREADY ------------| |
| | | |
| | | |
| |< - - - - - ACWAKE - - - - - - -| |
| R|<----------- ACDATA -------------|T |
| X|<----------- ACFLAG -------------|X |
| |------------ CAREADY ----------->| |
| | | |
| | | |
+------------+ +---------------+
2. HSI Subsystem in Linux
~~~~~~~~~~~~~~~~~~~~~~~~~
::
+------------+ +---------------+
| Cellular | | Application |
| Die | | Die |
| | - - - - - - CAWAKE - - - - - - >| |
| T|------------ CADATA ------------>|R |
| X|------------ CAFLAG ------------>|X |
| |<----------- ACREADY ------------| |
| | | |
| | | |
| |< - - - - - ACWAKE - - - - - - -| |
| R|<----------- ACDATA -------------|T |
| X|<----------- ACFLAG -------------|X |
| |------------ CAREADY ----------->| |
| | | |
| | | |
+------------+ +---------------+
HSI Subsystem in Linux
-------------------------
In the Linux kernel the hsi subsystem is supposed to be used for HSI devices.
The hsi subsystem contains drivers for hsi controllers including support for
......@@ -45,31 +48,41 @@ It also contains HSI client drivers, which make use of the generic API to
implement a protocol used on the HSI interface. These client drivers can
use an arbitrary number of channels.
3. hsi-char Device
~~~~~~~~~~~~~~~~~~
hsi-char Device
------------------
Each port automatically registers a generic client driver called hsi_char,
which provides a charecter device for userspace representing the HSI port.
It can be used to communicate via HSI from userspace. Userspace may
configure the hsi_char device using the following ioctl commands:
* HSC_RESET:
- flush the HSI port
HSC_RESET
flush the HSI port
* HSC_SET_PM
- enable or disable the client.
HSC_SET_PM
enable or disable the client.
* HSC_SEND_BREAK
- send break
HSC_SEND_BREAK
send break
* HSC_SET_RX
- set RX configuration
HSC_SET_RX
set RX configuration
* HSC_GET_RX
- get RX configuration
HSC_GET_RX
get RX configuration
* HSC_SET_TX
- set TX configuration
HSC_SET_TX
set TX configuration
HSC_GET_TX
get TX configuration
The kernel HSI API
------------------
.. kernel-doc:: include/linux/hsi/hsi.h
:internal:
.. kernel-doc:: drivers/hsi/hsi_core.c
:export:
* HSC_GET_TX
- get TX configuration
I\ :sup:`2`\ C and SMBus Subsystem
==================================
I\ :sup:`2`\ C (or without fancy typography, "I2C") is an acronym for
the "Inter-IC" bus, a simple bus protocol which is widely used where low
data rate communications suffice. Since it's also a licensed trademark,
some vendors use another name (such as "Two-Wire Interface", TWI) for
the same bus. I2C only needs two signals (SCL for clock, SDA for data),
conserving board real estate and minimizing signal quality issues. Most
I2C devices use seven bit addresses, and bus speeds of up to 400 kHz;
there's a high speed extension (3.4 MHz) that's not yet found wide use.
I2C is a multi-master bus; open drain signaling is used to arbitrate
between masters, as well as to handshake and to synchronize clocks from
slower clients.
The Linux I2C programming interfaces support only the master side of bus
interactions, not the slave side. The programming interface is
structured around two kinds of driver, and two kinds of device. An I2C
"Adapter Driver" abstracts the controller hardware; it binds to a
physical device (perhaps a PCI device or platform_device) and exposes a
:c:type:`struct i2c_adapter <i2c_adapter>` representing each
I2C bus segment it manages. On each I2C bus segment will be I2C devices
represented by a :c:type:`struct i2c_client <i2c_client>`.
Those devices will be bound to a :c:type:`struct i2c_driver
<i2c_driver>`, which should follow the standard Linux driver
model. (At this writing, a legacy model is more widely used.) There are
functions to perform various I2C protocol operations; at this writing
all such functions are usable only from task context.
The System Management Bus (SMBus) is a sibling protocol. Most SMBus
systems are also I2C conformant. The electrical constraints are tighter
for SMBus, and it standardizes particular protocol messages and idioms.
Controllers that support I2C can also support most SMBus operations, but
SMBus controllers don't support all the protocol options that an I2C
controller will. There are functions to perform various SMBus protocol
operations, either using I2C primitives or by issuing SMBus commands to
i2c_adapter devices which don't support those I2C operations.
.. kernel-doc:: include/linux/i2c.h
:internal:
.. kernel-doc:: drivers/i2c/i2c-boardinfo.c
:functions: i2c_register_board_info
.. kernel-doc:: drivers/i2c/i2c-core.c
:export:
========================================
The Linux driver implementer's API guide
========================================
The kernel offers a wide variety of interfaces to support the development
of device drivers. This document is an only somewhat organized collection
of some of those interfaces — it will hopefully get better over time! The
available subsections can be seen below.
.. class:: toc-title
Table of contents
.. toctree::
:maxdepth: 2
basics
infrastructure
message-based
sound
frame-buffer
input
spi
i2c
hsi
miscellaneous
Device drivers infrastructure
=============================
The Basic Device Driver-Model Structures
----------------------------------------
.. kernel-doc:: include/linux/device.h
:internal:
Device Drivers Base
-------------------
.. kernel-doc:: drivers/base/init.c
:internal:
.. kernel-doc:: drivers/base/driver.c
:export:
.. kernel-doc:: drivers/base/core.c
:export:
.. kernel-doc:: drivers/base/syscore.c
:export:
.. kernel-doc:: drivers/base/class.c
:export:
.. kernel-doc:: drivers/base/node.c
:internal:
.. kernel-doc:: drivers/base/firmware_class.c
:export:
.. kernel-doc:: drivers/base/transport_class.c
:export:
.. kernel-doc:: drivers/base/dd.c
:export:
.. kernel-doc:: include/linux/platform_device.h
:internal:
.. kernel-doc:: drivers/base/platform.c
:export:
.. kernel-doc:: drivers/base/bus.c
:export:
Buffer Sharing and Synchronization
----------------------------------
The dma-buf subsystem provides the framework for sharing buffers for
hardware (DMA) access across multiple device drivers and subsystems, and
for synchronizing asynchronous hardware access.
This is used, for example, by drm "prime" multi-GPU support, but is of
course not limited to GPU use cases.
The three main components of this are: (1) dma-buf, representing a
sg_table and exposed to userspace as a file descriptor to allow passing
between devices, (2) fence, which provides a mechanism to signal when
one device as finished access, and (3) reservation, which manages the
shared or exclusive fence(s) associated with the buffer.
dma-buf
~~~~~~~
.. kernel-doc:: drivers/dma-buf/dma-buf.c
:export:
.. kernel-doc:: include/linux/dma-buf.h
:internal:
reservation
~~~~~~~~~~~
.. kernel-doc:: drivers/dma-buf/reservation.c
:doc: Reservation Object Overview
.. kernel-doc:: drivers/dma-buf/reservation.c
:export:
.. kernel-doc:: include/linux/reservation.h
:internal:
fence
~~~~~
.. kernel-doc:: drivers/dma-buf/fence.c
:export:
.. kernel-doc:: include/linux/fence.h
:internal:
.. kernel-doc:: drivers/dma-buf/seqno-fence.c
:export:
.. kernel-doc:: include/linux/seqno-fence.h
:internal:
.. kernel-doc:: drivers/dma-buf/fence-array.c
:export:
.. kernel-doc:: include/linux/fence-array.h
:internal:
.. kernel-doc:: drivers/dma-buf/reservation.c
:export:
.. kernel-doc:: include/linux/reservation.h
:internal:
.. kernel-doc:: drivers/dma-buf/sync_file.c
:export:
.. kernel-doc:: include/linux/sync_file.h
:internal:
Device Drivers DMA Management
-----------------------------
.. kernel-doc:: drivers/base/dma-coherent.c
:export:
.. kernel-doc:: drivers/base/dma-mapping.c
:export:
Device Drivers Power Management
-------------------------------
.. kernel-doc:: drivers/base/power/main.c
:export:
Device Drivers ACPI Support
---------------------------
.. kernel-doc:: drivers/acpi/scan.c
:export:
.. kernel-doc:: drivers/acpi/scan.c
:internal:
Device drivers PnP support
--------------------------
.. kernel-doc:: drivers/pnp/core.c
:internal:
.. kernel-doc:: drivers/pnp/card.c
:export:
.. kernel-doc:: drivers/pnp/driver.c
:internal:
.. kernel-doc:: drivers/pnp/manager.c
:export:
.. kernel-doc:: drivers/pnp/support.c
:export:
Userspace IO devices
--------------------
.. kernel-doc:: drivers/uio/uio.c
:export:
.. kernel-doc:: include/linux/uio_driver.h
:internal:
Input Subsystem
===============
Input core
----------
.. kernel-doc:: include/linux/input.h
:internal:
.. kernel-doc:: drivers/input/input.c
:export:
.. kernel-doc:: drivers/input/ff-core.c
:export:
.. kernel-doc:: drivers/input/ff-memless.c
:export:
Multitouch Library
------------------
.. kernel-doc:: include/linux/input/mt.h
:internal:
.. kernel-doc:: drivers/input/input-mt.c
:export:
Polled input devices
--------------------
.. kernel-doc:: include/linux/input-polldev.h
:internal:
.. kernel-doc:: drivers/input/input-polldev.c
:export:
Matrix keyboards/keypads
------------------------
.. kernel-doc:: include/linux/input/matrix_keypad.h
:internal:
Sparse keymap support
---------------------
.. kernel-doc:: include/linux/input/sparse-keymap.h
:internal:
.. kernel-doc:: drivers/input/sparse-keymap.c
:export:
Message-based devices
=====================
Fusion message devices
----------------------
.. kernel-doc:: drivers/message/fusion/mptbase.c
:export:
.. kernel-doc:: drivers/message/fusion/mptscsih.c
:export:
Parallel Port Devices
=====================
.. kernel-doc:: include/linux/parport.h
:internal:
.. kernel-doc:: drivers/parport/ieee1284.c
:export:
.. kernel-doc:: drivers/parport/share.c
:export:
.. kernel-doc:: drivers/parport/daisy.c
:internal:
16x50 UART Driver
=================
.. kernel-doc:: drivers/tty/serial/serial_core.c
:export:
.. kernel-doc:: drivers/tty/serial/8250/8250_core.c
:export:
Pulse-Width Modulation (PWM)
============================
Pulse-width modulation is a modulation technique primarily used to
control power supplied to electrical devices.
The PWM framework provides an abstraction for providers and consumers of
PWM signals. A controller that provides one or more PWM signals is
registered as :c:type:`struct pwm_chip <pwm_chip>`. Providers
are expected to embed this structure in a driver-specific structure.
This structure contains fields that describe a particular chip.
A chip exposes one or more PWM signal sources, each of which exposed as
a :c:type:`struct pwm_device <pwm_device>`. Operations can be
performed on PWM devices to control the period, duty cycle, polarity and
active state of the signal.
Note that PWM devices are exclusive resources: they can always only be
used by one consumer at a time.
.. kernel-doc:: include/linux/pwm.h
:internal:
.. kernel-doc:: drivers/pwm/core.c
:export:
Sound Devices
=============
.. kernel-doc:: include/sound/core.h
:internal:
.. kernel-doc:: sound/sound_core.c
:export:
.. kernel-doc:: include/sound/pcm.h
:internal:
.. kernel-doc:: sound/core/pcm.c
:export:
.. kernel-doc:: sound/core/device.c
:export:
.. kernel-doc:: sound/core/info.c
:export:
.. kernel-doc:: sound/core/rawmidi.c
:export:
.. kernel-doc:: sound/core/sound.c
:export:
.. kernel-doc:: sound/core/memory.c
:export:
.. kernel-doc:: sound/core/pcm_memory.c
:export:
.. kernel-doc:: sound/core/init.c
:export:
.. kernel-doc:: sound/core/isadma.c
:export:
.. kernel-doc:: sound/core/control.c
:export:
.. kernel-doc:: sound/core/pcm_lib.c
:export:
.. kernel-doc:: sound/core/hwdep.c
:export:
.. kernel-doc:: sound/core/pcm_native.c
:export:
.. kernel-doc:: sound/core/memalloc.c
:export:
Serial Peripheral Interface (SPI)
=================================
SPI is the "Serial Peripheral Interface", widely used with embedded
systems because it is a simple and efficient interface: basically a
multiplexed shift register. Its three signal wires hold a clock (SCK,
often in the range of 1-20 MHz), a "Master Out, Slave In" (MOSI) data
line, and a "Master In, Slave Out" (MISO) data line. SPI is a full
duplex protocol; for each bit shifted out the MOSI line (one per clock)
another is shifted in on the MISO line. Those bits are assembled into
words of various sizes on the way to and from system memory. An
additional chipselect line is usually active-low (nCS); four signals are
normally used for each peripheral, plus sometimes an interrupt.
The SPI bus facilities listed here provide a generalized interface to
declare SPI busses and devices, manage them according to the standard
Linux driver model, and perform input/output operations. At this time,
only "master" side interfaces are supported, where Linux talks to SPI
peripherals and does not implement such a peripheral itself. (Interfaces
to support implementing SPI slaves would necessarily look different.)
The programming interface is structured around two kinds of driver, and
two kinds of device. A "Controller Driver" abstracts the controller
hardware, which may be as simple as a set of GPIO pins or as complex as
a pair of FIFOs connected to dual DMA engines on the other side of the
SPI shift register (maximizing throughput). Such drivers bridge between
whatever bus they sit on (often the platform bus) and SPI, and expose
the SPI side of their device as a :c:type:`struct spi_master
<spi_master>`. SPI devices are children of that master,
represented as a :c:type:`struct spi_device <spi_device>` and
manufactured from :c:type:`struct spi_board_info
<spi_board_info>` descriptors which are usually provided by
board-specific initialization code. A :c:type:`struct spi_driver
<spi_driver>` is called a "Protocol Driver", and is bound to a
spi_device using normal driver model calls.
The I/O model is a set of queued messages. Protocol drivers submit one
or more :c:type:`struct spi_message <spi_message>` objects,
which are processed and completed asynchronously. (There are synchronous
wrappers, however.) Messages are built from one or more
:c:type:`struct spi_transfer <spi_transfer>` objects, each of
which wraps a full duplex SPI transfer. A variety of protocol tweaking
options are needed, because different chips adopt very different
policies for how they use the bits transferred with SPI.
.. kernel-doc:: include/linux/spi/spi.h
:internal:
.. kernel-doc:: drivers/spi/spi.c
:functions: spi_register_board_info
.. kernel-doc:: drivers/spi/spi.c
:export:
......@@ -50,7 +50,7 @@ Attributes of devices can be exported by a device driver through sysfs.
Please see Documentation/filesystems/sysfs.txt for more information
on how sysfs works.
As explained in Documentation/kobject.txt, device attributes must be be
As explained in Documentation/kobject.txt, device attributes must be
created before the KOBJ_ADD uevent is generated. The only way to realize
that is by defining an attribute group.
......
......@@ -145,7 +145,7 @@ Table 1-1: Process specific entries in /proc
symbol the task is blocked in - or "0" if not blocked.
pagemap Page table
stack Report full stack trace, enable via CONFIG_STACKTRACE
smaps a extension based on maps, showing the memory consumption of
smaps an extension based on maps, showing the memory consumption of
each mapping and flags associated with it
numa_maps an extension based on maps, showing the memory locality and
binding policy as well as mem usage (in pages) of each mapping.
......
......@@ -13,6 +13,7 @@ Contents:
kernel-documentation
dev-tools/tools
driver-api/index
media/index
gpu/index
......
......@@ -34,15 +34,18 @@ will need to add a a 32-bit compat layer:
64-bit platforms do. So we always need padding to the natural size to get
this right.
* Pad the entire struct to a multiple of 64-bits - the structure size will
otherwise differ on 32-bit versus 64-bit. Having a different structure size
hurts when passing arrays of structures to the kernel, or if the kernel
checks the structure size, which e.g. the drm core does.
* Pad the entire struct to a multiple of 64-bits if the structure contains
64-bit types - the structure size will otherwise differ on 32-bit versus
64-bit. Having a different structure size hurts when passing arrays of
structures to the kernel, or if the kernel checks the structure size, which
e.g. the drm core does.
* Pointers are __u64, cast from/to a uintprt_t on the userspace side and
from/to a void __user * in the kernel. Try really hard not to delay this
conversion or worse, fiddle the raw __u64 through your code since that
diminishes the checking tools like sparse can provide.
diminishes the checking tools like sparse can provide. The macro
u64_to_user_ptr can be used in the kernel to avoid warnings about integers
and pointres of different sizes.
Basics
......
......@@ -2574,8 +2574,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
nodelayacct [KNL] Disable per-task delay accounting
nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
nodsp [SH] Disable hardware DSP at boot time.
noefi Disable EFI runtime services support.
......
......@@ -79,8 +79,6 @@ parameters may be changed at runtime by the command
ncr53c8xx= [HW,SCSI]
nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
osst= [HW,SCSI] SCSI Tape Driver
Format: <buffer_size>,<write_threshold>
See also Documentation/scsi/st.txt.
......
# -*- coding: utf-8; mode: python -*-
# pylint: disable=W0141,C0113,C0103,C0325
u"""
cdomain
~~~~~~~
......@@ -25,15 +26,26 @@ u"""
* :c:func:`VIDIOC_LOG_STATUS` or
* :any:`VIDIOC_LOG_STATUS` (``:any:`` needs sphinx 1.3)
* Handle signatures of function-like macros well. Don't try to deduce
arguments types of function-like macros.
"""
from docutils import nodes
from docutils.parsers.rst import directives
import sphinx
from sphinx import addnodes
from sphinx.domains.c import c_funcptr_sig_re, c_sig_re
from sphinx.domains.c import CObject as Base_CObject
from sphinx.domains.c import CDomain as Base_CDomain
__version__ = '1.0'
# Get Sphinx version
major, minor, patch = map(int, sphinx.__version__.split("."))
def setup(app):
app.override_domain(CDomain)
......@@ -53,9 +65,54 @@ class CObject(Base_CObject):
"name" : directives.unchanged
}
def handle_func_like_macro(self, sig, signode):
u"""Handles signatures of function-like macros.
If the objtype is 'function' and the the signature ``sig`` is a
function-like macro, the name of the macro is returned. Otherwise
``False`` is returned. """
if not self.objtype == 'function':
return False
m = c_funcptr_sig_re.match(sig)
if m is None:
m = c_sig_re.match(sig)
if m is None:
raise ValueError('no match')
rettype, fullname, arglist, _const = m.groups()
arglist = arglist.strip()
if rettype or not arglist:
return False
arglist = arglist.replace('`', '').replace('\\ ', '') # remove markup
arglist = [a.strip() for a in arglist.split(",")]
# has the first argument a type?
if len(arglist[0].split(" ")) > 1:
return False
# This is a function-like macro, it's arguments are typeless!
signode += addnodes.desc_name(fullname, fullname)
paramlist = addnodes.desc_parameterlist()
signode += paramlist
for argname in arglist:
param = addnodes.desc_parameter('', '', noemph=True)
# separate by non-breaking space in the output
param += nodes.emphasis(argname, argname)
paramlist += param
return fullname
def handle_signature(self, sig, signode):
"""Transform a C signature into RST nodes."""
fullname = super(CObject, self).handle_signature(sig, signode)
fullname = self.handle_func_like_macro(sig, signode)
if not fullname:
fullname = super(CObject, self).handle_signature(sig, signode)
if "name" in self.options:
if self.objtype == 'function':
fullname = self.options["name"]
......@@ -85,8 +142,14 @@ class CObject(Base_CObject):
indextext = self.get_index_text(name)
if indextext:
self.indexnode['entries'].append(('single', indextext,
targetname, '', None))
if major == 1 and minor < 4:
# indexnode's tuple changed in 1.4
# https://github.com/sphinx-doc/sphinx/commit/e6a5a3a92e938fcd75866b4227db9e0524d58f7c
self.indexnode['entries'].append(
('single', indextext, targetname, ''))
else:
self.indexnode['entries'].append(
('single', indextext, targetname, '', None))
class CDomain(Base_CDomain):
......
......@@ -12,13 +12,13 @@ ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
... unused hole ...
ffffec0000000000 - fffffc0000000000 (=44 bits) kasan shadow memory (16TB)
ffffec0000000000 - fffffbffffffffff (=44 bits) kasan shadow memory (16TB)
... unused hole ...
ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
... unused hole ...
ffffffef00000000 - ffffffff00000000 (=64 GB) EFI region mapping space
ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space
... unused hole ...
ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0
ffffffff80000000 - ffffffff9fffffff (=512 MB) kernel text mapping, from phys 0
ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space
ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
......
......@@ -5606,7 +5606,7 @@ M: Sebastian Reichel <sre@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi.git
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-hsi
F: Documentation/hsi.txt
F: Documentation/device-drivers/serial-interfaces.rst
F: drivers/hsi/
F: include/linux/hsi/
F: include/uapi/linux/hsi/
......
......@@ -212,6 +212,7 @@ my $anon_struct_union = 0;
my $type_constant = '\%([-_\w]+)';
my $type_func = '(\w+)\(\)';
my $type_param = '\@(\w+)';
my $type_fp_param = '\@(\w+)\(\)'; # Special RST handling for func ptr params
my $type_struct = '\&((struct\s*)*[_\w]+)';
my $type_struct_xml = '\\&amp;((struct\s*)*[_\w]+)';
my $type_env = '(\$\w+)';
......@@ -292,6 +293,7 @@ my @highlights_rst = (
# Note: need to escape () to avoid func matching later
[$type_member_func, "\\:c\\:type\\:`\$1\$2\\\\(\\\\) <\$1>`"],
[$type_member, "\\:c\\:type\\:`\$1\$2 <\$1>`"],
[$type_fp_param, "**\$1\\\\(\\\\)**"],
[$type_func, "\\:c\\:func\\:`\$1()`"],
[$type_struct_full, "\\:c\\:type\\:`\$1 \$2 <\$2>`"],
[$type_enum_full, "\\:c\\:type\\:`\$1 \$2 <\$2>`"],
......@@ -412,7 +414,7 @@ my $doc_com_body = '\s*\* ?';
my $doc_decl = $doc_com . '(\w+)';
# @params and a strictly limited set of supported section names
my $doc_sect = $doc_com .
'\s*(\@\w+|description|context|returns?|notes?|examples?)\s*:(.*)';
'\s*(\@[.\w]+|\@\.\.\.|description|context|returns?|notes?|examples?)\s*:(.*)';
my $doc_content = $doc_com_body . '(.*)';
my $doc_block = $doc_com . 'DOC:\s*(.*)?';
my $doc_inline_start = '^\s*/\*\*\s*$';
......@@ -2351,6 +2353,7 @@ sub push_parameter($$$) {
if ($type eq "" && $param =~ /\.\.\.$/)
{
$param = "...";
if (!defined $parameterdescs{$param} || $parameterdescs{$param} eq "") {
$parameterdescs{$param} = "variable arguments";
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment