Merge tag 'docs-next' of git://git.lwn.net/linux.git into patchwork

Merge back from docs-next in order to get the cdomain extension.

With such extension, the number of warnings when building docs
in nitpick mode reduced from 22 to 2 warnings.

* docs-next/docs-next:
  docs/driver-model: fix typo
  DMA-API-HOWTO: <asm/generic/scatterlist.h> is no more
  doc-rst:c-domain: function-like macros arguments
  doc-rst:c-domain: fix sphinx version incompatibility
  Documentation/filesystems: Fixed typo
  docs: Don't format internal MPT docs
  docs: split up serial-interfaces.rst
  docs: Pull the HSI documentation together
  docs: Special-case function-pointer parameters in kernel-doc
  docs: make kernel-doc handle varargs properly
  x86: fix memory ranges in mm documentation
  documentation/scsi: Remove nodisconnect parameter
  doc: ioctl: Add some clarifications to botching-up-ioctls
  docs: split up the driver book
  Docs: sphinxify device-drivers.tmpl

Documentation/DMA-API-HOWTO.txt

@@ -931,10 +931,8 @@ to "Closing".
 
 1) Struct scatterlist requirements.
 
-   Don't invent the architecture specific struct scatterlist; just use
-   <asm-generic/scatterlist.h>. You need to enable
-   CONFIG_NEED_SG_DMA_LENGTH if the architecture supports IOMMUs
-   (including software IOMMU).
+   You need to enable CONFIG_NEED_SG_DMA_LENGTH if the architecture
+   supports IOMMUs (including software IOMMU).
 
 2) ARCH_DMA_MINALIGN
 

Documentation/DocBook/Makefile

@@ -6,7 +6,7 @@
 # To add a new book the only step required is to add the book to the
 # list of DOCBOOKS.
 
-DOCBOOKS := z8530book.xml device-drivers.xml \
+DOCBOOKS := z8530book.xml  \
 	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
 	    writing_usb_driver.xml networking.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \

Documentation/driver-api/basics.rst

+Driver Basics
+=============
+
+Driver Entry and Exit points
+----------------------------
+
+.. kernel-doc:: include/linux/init.h
+   :internal:
+
+Atomic and pointer manipulation
+-------------------------------
+
+.. kernel-doc:: arch/x86/include/asm/atomic.h
+   :internal:
+
+Delaying, scheduling, and timer routines
+----------------------------------------
+
+.. kernel-doc:: include/linux/sched.h
+   :internal:
+
+.. kernel-doc:: kernel/sched/core.c
+   :export:
+
+.. kernel-doc:: kernel/sched/cpupri.c
+   :internal:
+
+.. kernel-doc:: kernel/sched/fair.c
+   :internal:
+
+.. kernel-doc:: include/linux/completion.h
+   :internal:
+
+.. kernel-doc:: kernel/time/timer.c
+   :export:
+
+Wait queues and Wake events
+---------------------------
+
+.. kernel-doc:: include/linux/wait.h
+   :internal:
+
+.. kernel-doc:: kernel/sched/wait.c
+   :export:
+
+High-resolution timers
+----------------------
+
+.. kernel-doc:: include/linux/ktime.h
+   :internal:
+
+.. kernel-doc:: include/linux/hrtimer.h
+   :internal:
+
+.. kernel-doc:: kernel/time/hrtimer.c
+   :export:
+
+Workqueues and Kevents
+----------------------
+
+.. kernel-doc:: include/linux/workqueue.h
+   :internal:
+
+.. kernel-doc:: kernel/workqueue.c
+   :export:
+
+Internal Functions
+------------------
+
+.. kernel-doc:: kernel/exit.c
+   :internal:
+
+.. kernel-doc:: kernel/signal.c
+   :internal:
+
+.. kernel-doc:: include/linux/kthread.h
+   :internal:
+
+.. kernel-doc:: kernel/kthread.c
+   :export:
+
+Kernel objects manipulation
+---------------------------
+
+.. kernel-doc:: lib/kobject.c
+   :export:
+
+Kernel utility functions
+------------------------
+
+.. kernel-doc:: include/linux/kernel.h
+   :internal:
+
+.. kernel-doc:: kernel/printk/printk.c
+   :export:
+
+.. kernel-doc:: kernel/panic.c
+   :export:
+
+.. kernel-doc:: kernel/sys.c
+   :export:
+
+.. kernel-doc:: kernel/rcu/srcu.c
+   :export:
+
+.. kernel-doc:: kernel/rcu/tree.c
+   :export:
+
+.. kernel-doc:: kernel/rcu/tree_plugin.h
+   :export:
+
+.. kernel-doc:: kernel/rcu/update.c
+   :export:
+
+Device Resource Management
+--------------------------
+
+.. kernel-doc:: drivers/base/devres.c
+   :export:
+

Documentation/driver-api/frame-buffer.rst

+Frame Buffer Library
+====================
+
+The frame buffer drivers depend heavily on four data structures. These
+structures are declared in include/linux/fb.h. They are fb_info,
+fb_var_screeninfo, fb_fix_screeninfo and fb_monospecs. The last
+three can be made available to and from userland.
+
+fb_info defines the current state of a particular video card. Inside
+fb_info, there exists a fb_ops structure which is a collection of
+needed functions to make fbdev and fbcon work. fb_info is only visible
+to the kernel.
+
+fb_var_screeninfo is used to describe the features of a video card
+that are user defined. With fb_var_screeninfo, things such as depth
+and the resolution may be defined.
+
+The next structure is fb_fix_screeninfo. This defines the properties
+of a card that are created when a mode is set and can't be changed
+otherwise. A good example of this is the start of the frame buffer
+memory. This "locks" the address of the frame buffer memory, so that it
+cannot be changed or moved.
+
+The last structure is fb_monospecs. In the old API, there was little
+importance for fb_monospecs. This allowed for forbidden things such as
+setting a mode of 800x600 on a fix frequency monitor. With the new API,
+fb_monospecs prevents such things, and if used correctly, can prevent a
+monitor from being cooked. fb_monospecs will not be useful until
+kernels 2.5.x.
+
+Frame Buffer Memory
+-------------------
+
+.. kernel-doc:: drivers/video/fbdev/core/fbmem.c
+   :export:
+
+Frame Buffer Colormap
+---------------------
+
+.. kernel-doc:: drivers/video/fbdev/core/fbcmap.c
+   :export:
+
+Frame Buffer Video Mode Database
+--------------------------------
+
+.. kernel-doc:: drivers/video/fbdev/core/modedb.c
+   :internal:
+
+.. kernel-doc:: drivers/video/fbdev/core/modedb.c
+   :export:
+
+Frame Buffer Macintosh Video Mode Database
+------------------------------------------
+
+.. kernel-doc:: drivers/video/fbdev/macmodes.c
+   :export:
+
+Frame Buffer Fonts
+------------------
+
+Refer to the file lib/fonts/fonts.c for more information.
+

Documentation/hsi.txt → Documentation/driver-api/hsi.rst

-HSI - High-speed Synchronous Serial Interface
+High Speed Synchronous Serial Interface (HSI)
+=============================================
 
-1. Introduction
-~~~~~~~~~~~~~~~
+Introduction
+---------------
 
 High Speed Syncronous Interface (HSI) is a fullduplex, low latency protocol,
 that is optimized for die-level interconnect between an Application Processor
@@ -17,25 +18,27 @@ signal can be used to wakeup the chips from standby modes. The signals are
 commonly prefixed by AC for signals going from the application die to the
 cellular die and CA for signals going the other way around.
 
-+------------+                                 +---------------+
-|  Cellular  |                                 |  Application  |
-|    Die     |                                 |      Die      |
-|            | - - - - - - CAWAKE - - - - - - >|               |
-|           T|------------ CADATA ------------>|R              |
-|           X|------------ CAFLAG ------------>|X              |
-|            |<----------- ACREADY ------------|               |
-|            |                                 |               |
-|            |                                 |               |
-|            |< - - - - -  ACWAKE - - - - - - -|               |
-|           R|<----------- ACDATA -------------|T              |
-|           X|<----------- ACFLAG -------------|X              |
-|            |------------ CAREADY ----------->|               |
-|            |                                 |               |
-|            |                                 |               |
-+------------+                                 +---------------+
-
-2. HSI Subsystem in Linux
-~~~~~~~~~~~~~~~~~~~~~~~~~
+::
+
+    +------------+                                 +---------------+
+    |  Cellular  |                                 |  Application  |
+    |    Die     |                                 |      Die      |
+    |            | - - - - - - CAWAKE - - - - - - >|               |
+    |           T|------------ CADATA ------------>|R              |
+    |           X|------------ CAFLAG ------------>|X              |
+    |            |<----------- ACREADY ------------|               |
+    |            |                                 |               |
+    |            |                                 |               |
+    |            |< - - - - -  ACWAKE - - - - - - -|               |
+    |           R|<----------- ACDATA -------------|T              |
+    |           X|<----------- ACFLAG -------------|X              |
+    |            |------------ CAREADY ----------->|               |
+    |            |                                 |               |
+    |            |                                 |               |
+    +------------+                                 +---------------+
+
+HSI Subsystem in Linux
+-------------------------
 
 In the Linux kernel the hsi subsystem is supposed to be used for HSI devices.
 The hsi subsystem contains drivers for hsi controllers including support for
@@ -45,31 +48,41 @@ It also contains HSI client drivers, which make use of the generic API to
 implement a protocol used on the HSI interface. These client drivers can
 use an arbitrary number of channels.
 
-3. hsi-char Device
-~~~~~~~~~~~~~~~~~~
+hsi-char Device
+------------------
 
 Each port automatically registers a generic client driver called hsi_char,
 which provides a charecter device for userspace representing the HSI port.
 It can be used to communicate via HSI from userspace. Userspace may
 configure the hsi_char device using the following ioctl commands:
 
-* HSC_RESET:
- - flush the HSI port
+HSC_RESET
+ flush the HSI port
 
-* HSC_SET_PM
- - enable or disable the client.
+HSC_SET_PM
+ enable or disable the client.
 
-* HSC_SEND_BREAK
- - send break
+HSC_SEND_BREAK
+ send break
 
-* HSC_SET_RX
- - set RX configuration
+HSC_SET_RX
+ set RX configuration
 
-* HSC_GET_RX
- - get RX configuration
+HSC_GET_RX
+ get RX configuration
 
-* HSC_SET_TX
- - set TX configuration
+HSC_SET_TX
+ set TX configuration
+
+HSC_GET_TX
+ get TX configuration
+
+The kernel HSI API
+------------------
+
+.. kernel-doc:: include/linux/hsi/hsi.h
+   :internal:
+
+.. kernel-doc:: drivers/hsi/hsi_core.c
+   :export:
 
-* HSC_GET_TX
- - get TX configuration

Documentation/driver-api/i2c.rst

+I\ :sup:`2`\ C and SMBus Subsystem
+==================================
+
+I\ :sup:`2`\ C (or without fancy typography, "I2C") is an acronym for
+the "Inter-IC" bus, a simple bus protocol which is widely used where low
+data rate communications suffice. Since it's also a licensed trademark,
+some vendors use another name (such as "Two-Wire Interface", TWI) for
+the same bus. I2C only needs two signals (SCL for clock, SDA for data),
+conserving board real estate and minimizing signal quality issues. Most
+I2C devices use seven bit addresses, and bus speeds of up to 400 kHz;
+there's a high speed extension (3.4 MHz) that's not yet found wide use.
+I2C is a multi-master bus; open drain signaling is used to arbitrate
+between masters, as well as to handshake and to synchronize clocks from
+slower clients.
+
+The Linux I2C programming interfaces support only the master side of bus
+interactions, not the slave side. The programming interface is
+structured around two kinds of driver, and two kinds of device. An I2C
+"Adapter Driver" abstracts the controller hardware; it binds to a
+physical device (perhaps a PCI device or platform_device) and exposes a
+:c:type:`struct i2c_adapter <i2c_adapter>` representing each
+I2C bus segment it manages. On each I2C bus segment will be I2C devices
+represented by a :c:type:`struct i2c_client <i2c_client>`.
+Those devices will be bound to a :c:type:`struct i2c_driver
+<i2c_driver>`, which should follow the standard Linux driver
+model. (At this writing, a legacy model is more widely used.) There are
+functions to perform various I2C protocol operations; at this writing
+all such functions are usable only from task context.
+
+The System Management Bus (SMBus) is a sibling protocol. Most SMBus
+systems are also I2C conformant. The electrical constraints are tighter
+for SMBus, and it standardizes particular protocol messages and idioms.
+Controllers that support I2C can also support most SMBus operations, but
+SMBus controllers don't support all the protocol options that an I2C
+controller will. There are functions to perform various SMBus protocol
+operations, either using I2C primitives or by issuing SMBus commands to
+i2c_adapter devices which don't support those I2C operations.
+
+.. kernel-doc:: include/linux/i2c.h
+   :internal:
+
+.. kernel-doc:: drivers/i2c/i2c-boardinfo.c
+   :functions: i2c_register_board_info
+
+.. kernel-doc:: drivers/i2c/i2c-core.c
+   :export:

Documentation/driver-api/index.rst

+========================================
+The Linux driver implementer's API guide
+========================================
+
+The kernel offers a wide variety of interfaces to support the development
+of device drivers.  This document is an only somewhat organized collection
+of some of those interfaces — it will hopefully get better over time!  The
+available subsections can be seen below.
+
+.. class:: toc-title
+
+	   Table of contents
+
+.. toctree::
+   :maxdepth: 2
+
+   basics
+   infrastructure
+   message-based
+   sound
+   frame-buffer
+   input
+   spi
+   i2c
+   hsi
+   miscellaneous

Documentation/driver-api/infrastructure.rst

+Device drivers infrastructure
+=============================
+
+The Basic Device Driver-Model Structures
+----------------------------------------
+
+.. kernel-doc:: include/linux/device.h
+   :internal:
+
+Device Drivers Base
+-------------------
+
+.. kernel-doc:: drivers/base/init.c
+   :internal:
+
+.. kernel-doc:: drivers/base/driver.c
+   :export:
+
+.. kernel-doc:: drivers/base/core.c
+   :export:
+
+.. kernel-doc:: drivers/base/syscore.c
+   :export:
+
+.. kernel-doc:: drivers/base/class.c
+   :export:
+
+.. kernel-doc:: drivers/base/node.c
+   :internal:
+
+.. kernel-doc:: drivers/base/firmware_class.c
+   :export:
+
+.. kernel-doc:: drivers/base/transport_class.c
+   :export:
+
+.. kernel-doc:: drivers/base/dd.c
+   :export:
+
+.. kernel-doc:: include/linux/platform_device.h
+   :internal:
+
+.. kernel-doc:: drivers/base/platform.c
+   :export:
+
+.. kernel-doc:: drivers/base/bus.c
+   :export:
+
+Buffer Sharing and Synchronization
+----------------------------------
+
+The dma-buf subsystem provides the framework for sharing buffers for
+hardware (DMA) access across multiple device drivers and subsystems, and
+for synchronizing asynchronous hardware access.
+
+This is used, for example, by drm "prime" multi-GPU support, but is of
+course not limited to GPU use cases.
+
+The three main components of this are: (1) dma-buf, representing a
+sg_table and exposed to userspace as a file descriptor to allow passing
+between devices, (2) fence, which provides a mechanism to signal when
+one device as finished access, and (3) reservation, which manages the
+shared or exclusive fence(s) associated with the buffer.
+
+dma-buf
+~~~~~~~
+
+.. kernel-doc:: drivers/dma-buf/dma-buf.c
+   :export:
+
+.. kernel-doc:: include/linux/dma-buf.h
+   :internal:
+
+reservation
+~~~~~~~~~~~
+
+.. kernel-doc:: drivers/dma-buf/reservation.c
+   :doc: Reservation Object Overview
+
+.. kernel-doc:: drivers/dma-buf/reservation.c
+   :export:
+
+.. kernel-doc:: include/linux/reservation.h
+   :internal:
+
+fence
+~~~~~
+
+.. kernel-doc:: drivers/dma-buf/fence.c
+   :export:
+
+.. kernel-doc:: include/linux/fence.h
+   :internal:
+
+.. kernel-doc:: drivers/dma-buf/seqno-fence.c
+   :export:
+
+.. kernel-doc:: include/linux/seqno-fence.h
+   :internal:
+
+.. kernel-doc:: drivers/dma-buf/fence-array.c
+   :export:
+
+.. kernel-doc:: include/linux/fence-array.h
+   :internal:
+
+.. kernel-doc:: drivers/dma-buf/reservation.c
+   :export:
+
+.. kernel-doc:: include/linux/reservation.h
+   :internal:
+
+.. kernel-doc:: drivers/dma-buf/sync_file.c
+   :export:
+
+.. kernel-doc:: include/linux/sync_file.h
+   :internal:
+
+Device Drivers DMA Management
+-----------------------------
+
+.. kernel-doc:: drivers/base/dma-coherent.c
+   :export:
+
+.. kernel-doc:: drivers/base/dma-mapping.c
+   :export:
+
+Device Drivers Power Management
+-------------------------------
+
+.. kernel-doc:: drivers/base/power/main.c
+   :export:
+
+Device Drivers ACPI Support
+---------------------------
+
+.. kernel-doc:: drivers/acpi/scan.c
+   :export:
+
+.. kernel-doc:: drivers/acpi/scan.c
+   :internal:
+
+Device drivers PnP support
+--------------------------
+
+.. kernel-doc:: drivers/pnp/core.c
+   :internal:
+
+.. kernel-doc:: drivers/pnp/card.c
+   :export:
+
+.. kernel-doc:: drivers/pnp/driver.c
+   :internal:
+
+.. kernel-doc:: drivers/pnp/manager.c
+   :export:
+
+.. kernel-doc:: drivers/pnp/support.c
+   :export:
+
+Userspace IO devices
+--------------------
+
+.. kernel-doc:: drivers/uio/uio.c
+   :export:
+
+.. kernel-doc:: include/linux/uio_driver.h
+   :internal:
+

Documentation/driver-api/input.rst

+Input Subsystem
+===============
+
+Input core
+----------
+
+.. kernel-doc:: include/linux/input.h
+   :internal:
+
+.. kernel-doc:: drivers/input/input.c
+   :export:
+
+.. kernel-doc:: drivers/input/ff-core.c
+   :export:
+
+.. kernel-doc:: drivers/input/ff-memless.c
+   :export:
+
+Multitouch Library
+------------------
+
+.. kernel-doc:: include/linux/input/mt.h
+   :internal:
+
+.. kernel-doc:: drivers/input/input-mt.c
+   :export:
+
+Polled input devices
+--------------------
+
+.. kernel-doc:: include/linux/input-polldev.h
+   :internal:
+
+.. kernel-doc:: drivers/input/input-polldev.c
+   :export:
+
+Matrix keyboards/keypads
+------------------------
+
+.. kernel-doc:: include/linux/input/matrix_keypad.h
+   :internal:
+
+Sparse keymap support
+---------------------
+
+.. kernel-doc:: include/linux/input/sparse-keymap.h
+   :internal:
+
+.. kernel-doc:: drivers/input/sparse-keymap.c
+   :export:
+

Documentation/driver-api/message-based.rst

+Message-based devices
+=====================
+
+Fusion message devices
+----------------------
+
+.. kernel-doc:: drivers/message/fusion/mptbase.c
+   :export:
+
+.. kernel-doc:: drivers/message/fusion/mptscsih.c
+   :export:
+

Documentation/driver-api/miscellaneous.rst

+Parallel Port Devices
+=====================
+
+.. kernel-doc:: include/linux/parport.h
+   :internal:
+
+.. kernel-doc:: drivers/parport/ieee1284.c
+   :export:
+
+.. kernel-doc:: drivers/parport/share.c
+   :export:
+
+.. kernel-doc:: drivers/parport/daisy.c
+   :internal:
+
+16x50 UART Driver
+=================
+
+.. kernel-doc:: drivers/tty/serial/serial_core.c
+   :export:
+
+.. kernel-doc:: drivers/tty/serial/8250/8250_core.c
+   :export:
+
+Pulse-Width Modulation (PWM)
+============================
+
+Pulse-width modulation is a modulation technique primarily used to
+control power supplied to electrical devices.
+
+The PWM framework provides an abstraction for providers and consumers of
+PWM signals. A controller that provides one or more PWM signals is
+registered as :c:type:`struct pwm_chip <pwm_chip>`. Providers
+are expected to embed this structure in a driver-specific structure.
+This structure contains fields that describe a particular chip.
+
+A chip exposes one or more PWM signal sources, each of which exposed as
+a :c:type:`struct pwm_device <pwm_device>`. Operations can be
+performed on PWM devices to control the period, duty cycle, polarity and
+active state of the signal.
+
+Note that PWM devices are exclusive resources: they can always only be
+used by one consumer at a time.
+
+.. kernel-doc:: include/linux/pwm.h
+   :internal:
+
+.. kernel-doc:: drivers/pwm/core.c
+   :export:
+   

Documentation/driver-api/sound.rst

+Sound Devices
+=============
+
+.. kernel-doc:: include/sound/core.h
+   :internal:
+
+.. kernel-doc:: sound/sound_core.c
+   :export:
+
+.. kernel-doc:: include/sound/pcm.h
+   :internal:
+
+.. kernel-doc:: sound/core/pcm.c
+   :export:
+
+.. kernel-doc:: sound/core/device.c
+   :export:
+
+.. kernel-doc:: sound/core/info.c
+   :export:
+
+.. kernel-doc:: sound/core/rawmidi.c
+   :export:
+
+.. kernel-doc:: sound/core/sound.c
+   :export:
+
+.. kernel-doc:: sound/core/memory.c
+   :export:
+
+.. kernel-doc:: sound/core/pcm_memory.c
+   :export:
+
+.. kernel-doc:: sound/core/init.c
+   :export:
+
+.. kernel-doc:: sound/core/isadma.c
+   :export:
+
+.. kernel-doc:: sound/core/control.c
+   :export:
+
+.. kernel-doc:: sound/core/pcm_lib.c
+   :export:
+
+.. kernel-doc:: sound/core/hwdep.c
+   :export:
+
+.. kernel-doc:: sound/core/pcm_native.c
+   :export:
+
+.. kernel-doc:: sound/core/memalloc.c
+   :export:
+

Documentation/driver-api/spi.rst

+Serial Peripheral Interface (SPI)
+=================================
+
+SPI is the "Serial Peripheral Interface", widely used with embedded
+systems because it is a simple and efficient interface: basically a
+multiplexed shift register. Its three signal wires hold a clock (SCK,
+often in the range of 1-20 MHz), a "Master Out, Slave In" (MOSI) data
+line, and a "Master In, Slave Out" (MISO) data line. SPI is a full
+duplex protocol; for each bit shifted out the MOSI line (one per clock)
+another is shifted in on the MISO line. Those bits are assembled into
+words of various sizes on the way to and from system memory. An
+additional chipselect line is usually active-low (nCS); four signals are
+normally used for each peripheral, plus sometimes an interrupt.
+
+The SPI bus facilities listed here provide a generalized interface to
+declare SPI busses and devices, manage them according to the standard
+Linux driver model, and perform input/output operations. At this time,
+only "master" side interfaces are supported, where Linux talks to SPI
+peripherals and does not implement such a peripheral itself. (Interfaces
+to support implementing SPI slaves would necessarily look different.)
+
+The programming interface is structured around two kinds of driver, and
+two kinds of device. A "Controller Driver" abstracts the controller
+hardware, which may be as simple as a set of GPIO pins or as complex as
+a pair of FIFOs connected to dual DMA engines on the other side of the
+SPI shift register (maximizing throughput). Such drivers bridge between
+whatever bus they sit on (often the platform bus) and SPI, and expose
+the SPI side of their device as a :c:type:`struct spi_master
+<spi_master>`. SPI devices are children of that master,
+represented as a :c:type:`struct spi_device <spi_device>` and
+manufactured from :c:type:`struct spi_board_info
+<spi_board_info>` descriptors which are usually provided by
+board-specific initialization code. A :c:type:`struct spi_driver
+<spi_driver>` is called a "Protocol Driver", and is bound to a
+spi_device using normal driver model calls.
+
+The I/O model is a set of queued messages. Protocol drivers submit one
+or more :c:type:`struct spi_message <spi_message>` objects,
+which are processed and completed asynchronously. (There are synchronous
+wrappers, however.) Messages are built from one or more
+:c:type:`struct spi_transfer <spi_transfer>` objects, each of
+which wraps a full duplex SPI transfer. A variety of protocol tweaking
+options are needed, because different chips adopt very different
+policies for how they use the bits transferred with SPI.
+
+.. kernel-doc:: include/linux/spi/spi.h
+   :internal:
+
+.. kernel-doc:: drivers/spi/spi.c
+   :functions: spi_register_board_info
+
+.. kernel-doc:: drivers/spi/spi.c
+   :export:

Documentation/driver-model/device.txt

@@ -50,7 +50,7 @@ Attributes of devices can be exported by a device driver through sysfs.
 Please see Documentation/filesystems/sysfs.txt for more information
 on how sysfs works.
 
-As explained in Documentation/kobject.txt, device attributes must be be
+As explained in Documentation/kobject.txt, device attributes must be
 created before the KOBJ_ADD uevent is generated. The only way to realize
 that is by defining an attribute group.
 

Documentation/filesystems/proc.txt

@@ -145,7 +145,7 @@ Table 1-1: Process specific entries in /proc
 		symbol the task is blocked in - or "0" if not blocked.
  pagemap	Page table
  stack		Report full stack trace, enable via CONFIG_STACKTRACE
- smaps		a extension based on maps, showing the memory consumption of
+ smaps		an extension based on maps, showing the memory consumption of
 		each mapping and flags associated with it
  numa_maps	an extension based on maps, showing the memory locality and
 		binding policy as well as mem usage (in pages) of each mapping.

Documentation/index.rst

@@ -13,6 +13,7 @@ Contents:
 
    kernel-documentation
    dev-tools/tools
+   driver-api/index
    media/index
    gpu/index
 

Documentation/ioctl/botching-up-ioctls.txt

@@ -34,15 +34,18 @@ will need to add a a 32-bit compat layer:
    64-bit platforms do. So we always need padding to the natural size to get
    this right.
 
- * Pad the entire struct to a multiple of 64-bits - the structure size will
-   otherwise differ on 32-bit versus 64-bit. Having a different structure size
-   hurts when passing arrays of structures to the kernel, or if the kernel
-   checks the structure size, which e.g. the drm core does.
+ * Pad the entire struct to a multiple of 64-bits if the structure contains
+   64-bit types - the structure size will otherwise differ on 32-bit versus
+   64-bit. Having a different structure size hurts when passing arrays of
+   structures to the kernel, or if the kernel checks the structure size, which
+   e.g. the drm core does.
 
  * Pointers are __u64, cast from/to a uintprt_t on the userspace side and
    from/to a void __user * in the kernel. Try really hard not to delay this
    conversion or worse, fiddle the raw __u64 through your code since that
-   diminishes the checking tools like sparse can provide.
+   diminishes the checking tools like sparse can provide. The macro
+   u64_to_user_ptr can be used in the kernel to avoid warnings about integers
+   and pointres of different sizes.
 
 
 Basics

Documentation/kernel-parameters.txt

@@ -2574,8 +2574,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	nodelayacct	[KNL] Disable per-task delay accounting
 
-	nodisconnect	[HW,SCSI,M68K] Disables SCSI disconnects.
-
 	nodsp		[SH] Disable hardware DSP at boot time.
 
 	noefi		Disable EFI runtime services support.

Documentation/scsi/scsi-parameters.txt

@@ -79,8 +79,6 @@ parameters may be changed at runtime by the command
 
 	ncr53c8xx=	[HW,SCSI]
 
-	nodisconnect	[HW,SCSI,M68K] Disables SCSI disconnects.
-
 	osst=		[HW,SCSI] SCSI Tape Driver
 			Format: <buffer_size>,<write_threshold>
 			See also Documentation/scsi/st.txt.

Documentation/sphinx/cdomain.py

 # -*- coding: utf-8; mode: python -*-
+# pylint: disable=W0141,C0113,C0103,C0325
 u"""
     cdomain
     ~~~~~~~
@@ -25,15 +26,26 @@ u"""
 
           * :c:func:`VIDIOC_LOG_STATUS` or
           * :any:`VIDIOC_LOG_STATUS` (``:any:`` needs sphinx 1.3)
+
+     * Handle signatures of function-like macros well. Don't try to deduce
+       arguments types of function-like macros.
+
 """
 
+from docutils import nodes
 from docutils.parsers.rst import directives
 
+import sphinx
+from sphinx import addnodes
+from sphinx.domains.c import c_funcptr_sig_re, c_sig_re
 from sphinx.domains.c import CObject as Base_CObject
 from sphinx.domains.c import CDomain as Base_CDomain
 
 __version__  = '1.0'
 
+# Get Sphinx version
+major, minor, patch = map(int, sphinx.__version__.split("."))
+
 def setup(app):
 
     app.override_domain(CDomain)
@@ -53,9 +65,54 @@ class CObject(Base_CObject):
         "name" : directives.unchanged
     }
 
+    def handle_func_like_macro(self, sig, signode):
+        u"""Handles signatures of function-like macros.
+
+        If the objtype is 'function' and the the signature ``sig`` is a
+        function-like macro, the name of the macro is returned. Otherwise
+        ``False`` is returned.  """
+
+        if not self.objtype == 'function':
+            return False
+
+        m = c_funcptr_sig_re.match(sig)
+        if m is None:
+            m = c_sig_re.match(sig)
+            if m is None:
+                raise ValueError('no match')
+
+        rettype, fullname, arglist, _const = m.groups()
+        arglist = arglist.strip()
+        if rettype or not arglist:
+            return False
+
+        arglist = arglist.replace('`', '').replace('\\ ', '') # remove markup
+        arglist = [a.strip() for a in arglist.split(",")]
+
+        # has the first argument a type?
+        if len(arglist[0].split(" ")) > 1:
+            return False
+
+        # This is a function-like macro, it's arguments are typeless!
+        signode  += addnodes.desc_name(fullname, fullname)
+        paramlist = addnodes.desc_parameterlist()
+        signode  += paramlist
+
+        for argname in arglist:
+            param = addnodes.desc_parameter('', '', noemph=True)
+            # separate by non-breaking space in the output
+            param += nodes.emphasis(argname, argname)
+            paramlist += param
+
+        return fullname
+
     def handle_signature(self, sig, signode):
         """Transform a C signature into RST nodes."""
-        fullname = super(CObject, self).handle_signature(sig, signode)
+
+        fullname = self.handle_func_like_macro(sig, signode)
+        if not fullname:
+            fullname = super(CObject, self).handle_signature(sig, signode)
+
         if "name" in self.options:
             if self.objtype == 'function':
                 fullname = self.options["name"]
@@ -85,8 +142,14 @@ class CObject(Base_CObject):
 
         indextext = self.get_index_text(name)
         if indextext:
-            self.indexnode['entries'].append(('single', indextext,
-                                              targetname, '', None))
+            if major == 1 and minor < 4:
+                # indexnode's tuple changed in 1.4
+                # https://github.com/sphinx-doc/sphinx/commit/e6a5a3a92e938fcd75866b4227db9e0524d58f7c
+                self.indexnode['entries'].append(
+                    ('single', indextext, targetname, ''))
+            else:
+                self.indexnode['entries'].append(
+                    ('single', indextext, targetname, '', None))
 
 class CDomain(Base_CDomain):
 

Documentation/x86/x86_64/mm.txt

@@ -12,13 +12,13 @@ ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
 ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
 ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
 ... unused hole ...
-ffffec0000000000 - fffffc0000000000 (=44 bits) kasan shadow memory (16TB)
+ffffec0000000000 - fffffbffffffffff (=44 bits) kasan shadow memory (16TB)
 ... unused hole ...
 ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
 ... unused hole ...
-ffffffef00000000 - ffffffff00000000 (=64 GB) EFI region mapping space
+ffffffef00000000 - fffffffeffffffff (=64 GB) EFI region mapping space
 ... unused hole ...
-ffffffff80000000 - ffffffffa0000000 (=512 MB)  kernel text mapping, from phys 0
+ffffffff80000000 - ffffffff9fffffff (=512 MB)  kernel text mapping, from phys 0
 ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space
 ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
 ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole

MAINTAINERS

@@ -5606,7 +5606,7 @@ M:	Sebastian Reichel <sre@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi.git
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-bus-hsi
-F:	Documentation/hsi.txt
+F:	Documentation/device-drivers/serial-interfaces.rst
 F:	drivers/hsi/
 F:	include/linux/hsi/
 F:	include/uapi/linux/hsi/

scripts/kernel-doc

@@ -212,6 +212,7 @@ my $anon_struct_union = 0;
 my $type_constant = '\%([-_\w]+)';
 my $type_func = '(\w+)\(\)';
 my $type_param = '\@(\w+)';
+my $type_fp_param = '\@(\w+)\(\)';  # Special RST handling for func ptr params
 my $type_struct = '\&((struct\s*)*[_\w]+)';
 my $type_struct_xml = '\\&((struct\s*)*[_\w]+)';
 my $type_env = '(\$\w+)';
@@ -292,6 +293,7 @@ my @highlights_rst = (
                        # Note: need to escape () to avoid func matching later
                        [$type_member_func, "\\:c\\:type\\:`\$1\$2\\\\(\\\\) <\$1>`"],
                        [$type_member, "\\:c\\:type\\:`\$1\$2 <\$1>`"],
+		       [$type_fp_param, "**\$1\\\\(\\\\)**"],
                        [$type_func, "\\:c\\:func\\:`\$1()`"],
                        [$type_struct_full, "\\:c\\:type\\:`\$1 \$2 <\$2>`"],
                        [$type_enum_full, "\\:c\\:type\\:`\$1 \$2 <\$2>`"],
@@ -412,7 +414,7 @@ my $doc_com_body = '\s*\* ?';
 my $doc_decl = $doc_com . '(\w+)';
 # @params and a strictly limited set of supported section names
 my $doc_sect = $doc_com . 
-    '\s*(\@\w+|description|context|returns?|notes?|examples?)\s*:(.*)';
+    '\s*(\@[.\w]+|\@\.\.\.|description|context|returns?|notes?|examples?)\s*:(.*)';
 my $doc_content = $doc_com_body . '(.*)';
 my $doc_block = $doc_com . 'DOC:\s*(.*)?';
 my $doc_inline_start = '^\s*/\*\*\s*$';
@@ -2351,6 +2353,7 @@ sub push_parameter($$$) {
 
 	if ($type eq "" && $param =~ /\.\.\.$/)
 	{
+	    $param = "...";
 	    if (!defined $parameterdescs{$param} || $parameterdescs{$param} eq "") {
 		$parameterdescs{$param} = "variable arguments";
 	    }