Merge branches 'clk-vc5', 'clk-hsdk', 'clk-mediatek' and 'clk-baikal' into clk-next

 - Support IDT VersaClock 5P49V5925
 - Bunch of updates for HSDK clock generation unit (CGU) driver
 - New clk driver for Baikal-T1 SoCs

* clk-vc5:
  dt: Add bindings for IDT VersaClock 5P49V5925
  clk: vc5: Add support for IDT VersaClock 5P49V6965

* clk-hsdk:
  CLK: HSDK: CGU: add support for 148.5MHz clock
  CLK: HSDK: CGU: support PLL bypassing
  CLK: HSDK: CGU: check if PLL is bypassed first

* clk-mediatek:
  clk: mediatek: assign the initial value to clk_init_data of mtk_mux
  clk: mediatek: Add MT6765 clock support
  clk: mediatek: add mt6765 clock IDs
  dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC

* clk-baikal:
  clk: Add Baikal-T1 CCU Dividers driver
  clk: Add Baikal-T1 CCU PLLs driver
  dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
  dt-bindings: clk: Add Baikal-T1 CCU PLLs binding

Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt

@@ -8,6 +8,7 @@ Required Properties:
 - compatible: Should be one of:
 	- "mediatek,mt2701-apmixedsys"
 	- "mediatek,mt2712-apmixedsys", "syscon"
+	- "mediatek,mt6765-apmixedsys", "syscon"
 	- "mediatek,mt6779-apmixedsys", "syscon"
 	- "mediatek,mt6797-apmixedsys"
 	- "mediatek,mt7622-apmixedsys"

Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt

@@ -7,6 +7,7 @@ Required Properties:
 
 - compatible: Should be one of:
 	- "mediatek,mt2701-audsys", "syscon"
+	- "mediatek,mt6765-audsys", "syscon"
 	- "mediatek,mt6779-audio", "syscon"
 	- "mediatek,mt7622-audsys", "syscon"
 	- "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"

Documentation/devicetree/bindings/arm/mediatek/mediatek,camsys.txt

@@ -6,6 +6,7 @@ The MediaTek camsys controller provides various clocks to the system.
 Required Properties:
 
 - compatible: Should be one of:
+	- "mediatek,mt6765-camsys", "syscon"
 	- "mediatek,mt6779-camsys", "syscon"
 	- "mediatek,mt8183-camsys", "syscon"
 - #clock-cells: Must be 1

Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt

@@ -8,6 +8,7 @@ Required Properties:
 - compatible: Should be one of:
 	- "mediatek,mt2701-imgsys", "syscon"
 	- "mediatek,mt2712-imgsys", "syscon"
+	- "mediatek,mt6765-imgsys", "syscon"
 	- "mediatek,mt6779-imgsys", "syscon"
 	- "mediatek,mt6797-imgsys", "syscon"
 	- "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon"

Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt

@@ -9,6 +9,7 @@ Required Properties:
 - compatible: Should be one of:
 	- "mediatek,mt2701-infracfg", "syscon"
 	- "mediatek,mt2712-infracfg", "syscon"
+	- "mediatek,mt6765-infracfg", "syscon"
 	- "mediatek,mt6779-infracfg_ao", "syscon"
 	- "mediatek,mt6797-infracfg", "syscon"
 	- "mediatek,mt7622-infracfg", "syscon"

Documentation/devicetree/bindings/arm/mediatek/mediatek,mipi0a.txt

+Mediatek mipi0a (mipi_rx_ana_csi0a) controller
+============================
+
+The Mediatek mipi0a controller provides various clocks
+to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt6765-mipi0a", "syscon"
+- #clock-cells: Must be 1
+
+The mipi0a controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+The mipi0a controller also uses the common power domain from
+Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+The available power doamins are defined in dt-bindings/power/mt*-power.h.
+
+Example:
+
+mipi0a: clock-controller@11c10000 {
+	compatible = "mediatek,mt6765-mipi0a", "syscon";
+	reg = <0 0x11c10000 0 0x1000>;
+	power-domains = <&scpsys MT6765_POWER_DOMAIN_CAM>;
+	#clock-cells = <1>;
+};

Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt

@@ -8,6 +8,7 @@ Required Properties:
 - compatible: Should be one of:
 	- "mediatek,mt2701-mmsys", "syscon"
 	- "mediatek,mt2712-mmsys", "syscon"
+	- "mediatek,mt6765-mmsys", "syscon"
 	- "mediatek,mt6779-mmsys", "syscon"
 	- "mediatek,mt6797-mmsys", "syscon"
 	- "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon"

Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt

@@ -9,6 +9,7 @@ Required Properties:
 - compatible: Should be one of:
 	- "mediatek,mt2701-pericfg", "syscon"
 	- "mediatek,mt2712-pericfg", "syscon"
+	- "mediatek,mt6765-pericfg", "syscon"
 	- "mediatek,mt7622-pericfg", "syscon"
 	- "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon"
 	- "mediatek,mt7629-pericfg", "syscon"

Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt

@@ -8,6 +8,7 @@ Required Properties:
 - compatible: Should be one of:
 	- "mediatek,mt2701-topckgen"
 	- "mediatek,mt2712-topckgen", "syscon"
+	- "mediatek,mt6765-topckgen", "syscon"
 	- "mediatek,mt6779-topckgen", "syscon"
 	- "mediatek,mt6797-topckgen"
 	- "mediatek,mt7622-topckgen"

Documentation/devicetree/bindings/arm/mediatek/mediatek,vcodecsys.txt

+Mediatek vcodecsys controller
+============================
+
+The Mediatek vcodecsys controller provides various clocks to the system.
+
+Required Properties:
+
+- compatible: Should be one of:
+	- "mediatek,mt6765-vcodecsys", "syscon"
+- #clock-cells: Must be 1
+
+The vcodecsys controller uses the common clk binding from
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+The available clocks are defined in dt-bindings/clock/mt*-clk.h.
+
+The vcodecsys controller also uses the common power domain from
+Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+The available power doamins are defined in dt-bindings/power/mt*-power.h.
+
+Example:
+
+venc_gcon: clock-controller@17000000 {
+	compatible = "mediatek,mt6765-vcodecsys", "syscon";
+	reg = <0 0x17000000 0 0x10000>;
+	power-domains = <&scpsys MT6765_POWER_DOMAIN_VCODEC>;
+	#clock-cells = <1>;
+};

Documentation/devicetree/bindings/clock/baikal,bt1-ccu-div.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-div.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 Clock Control Unit Dividers
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  Clocks Control Unit is the core of Baikal-T1 SoC System Controller
+  responsible for the chip subsystems clocking and resetting. The CCU is
+  connected with an external fixed rate oscillator, which signal is transformed
+  into clocks of various frequencies and then propagated to either individual
+  IP-blocks or to groups of blocks (clock domains). The transformation is done
+  by means of an embedded into CCU PLLs and gateable/non-gateable dividers. The
+  later ones are described in this binding. Each clock domain can be also
+  individually reset by using the domain clocks divider configuration
+  registers. Baikal-T1 CCU is logically divided into the next components:
+  1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
+     in general can provide any frequency supported by the CCU PLLs).
+  2) PLLs clocks generators (PLLs).
+  3) AXI-bus clock dividers (AXI) - described in this binding file.
+  4) System devices reference clock dividers (SYS) - described in this binding
+     file.
+  which are connected with each other as shown on the next figure:
+
+          +---------------+
+          | Baikal-T1 CCU |
+          |   +----+------|- MIPS P5600 cores
+          | +-|PLLs|------|- DDR controller
+          | | +----+      |
+  +----+  | |  |  |       |
+  |XTAL|--|-+  |  | +---+-|
+  +----+  | |  |  +-|AXI|-|- AXI-bus
+          | |  |    +---+-|
+          | |  |          |
+          | |  +----+---+-|- APB-bus
+          | +-------|SYS|-|- Low-speed Devices
+          |         +---+-|- High-speed Devices
+          +---------------+
+
+  Each sub-block is represented as a separate DT node and has an individual
+  driver to be bound with.
+
+  In order to create signals of wide range frequencies the external oscillator
+  output is primarily connected to a set of CCU PLLs. Some of PLLs CLKOUT are
+  then passed over CCU dividers to create signals required for the target clock
+  domain (like AXI-bus or System Device consumers). The dividers have the
+  following structure:
+
+          +--------------+
+  CLKIN --|->+----+ 1|\  |
+  SETCLK--|--|/DIV|->| | |
+  CLKDIV--|--|    |  | |-|->CLKLOUT
+  LOCK----|--+----+  | | |
+          |          |/  |
+          |           |  |
+  EN------|-----------+  |
+  RST-----|--------------|->RSTOUT
+          +--------------+
+
+  where CLKIN is the reference clock coming either from CCU PLLs or from an
+  external clock oscillator, SETCLK - a command to update the output clock in
+  accordance with a set divider, CLKDIV - clocks divider, LOCK - a signal of
+  the output clock stabilization, EN - enable/disable the divider block,
+  RST/RSTOUT - reset clocks domain signal. Depending on the consumer IP-core
+  peculiarities the dividers may lack of some functionality depicted on the
+  figure above (like EN, CLKDIV/LOCK/SETCLK). In this case the corresponding
+  clock provider just doesn't expose either switching functions, or the rate
+  configuration, or both of them.
+
+  The clock dividers, which output clock is then consumed by the SoC individual
+  devices, are united into a single clocks provider called System Devices CCU.
+  Similarly the dividers with output clocks utilized as AXI-bus reference clocks
+  are called AXI-bus CCU. Both of them use the common clock bindings with no
+  custom properties. The list of exported clocks and reset signals can be found
+  in the files: 'include/dt-bindings/clock/bt1-ccu.h' and
+  'include/dt-bindings/reset/bt1-ccu.h'. Since System Devices and AXI-bus CCU
+  are a part of the Baikal-T1 SoC System Controller their DT nodes are supposed
+  to be a children of later one.
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: baikal,bt1-ccu-axi
+
+then:
+  properties:
+    clocks:
+      items:
+        - description: CCU SATA PLL output clock
+        - description: CCU PCIe PLL output clock
+        - description: CCU Ethernet PLL output clock
+
+    clock-names:
+      items:
+        - const: sata_clk
+        - const: pcie_clk
+        - const: eth_clk
+
+else:
+  properties:
+    clocks:
+      items:
+        - description: External reference clock
+        - description: CCU SATA PLL output clock
+        - description: CCU PCIe PLL output clock
+        - description: CCU Ethernet PLL output clock
+
+    clock-names:
+      items:
+        - const: ref_clk
+        - const: sata_clk
+        - const: pcie_clk
+        - const: eth_clk
+
+properties:
+  compatible:
+    enum:
+      - baikal,bt1-ccu-axi
+      - baikal,bt1-ccu-sys
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+examples:
+  # AXI-bus Clock Control Unit node:
+  - |
+    #include <dt-bindings/clock/bt1-ccu.h>
+
+    clock-controller@1f04d030 {
+      compatible = "baikal,bt1-ccu-axi";
+      reg = <0x1f04d030 0x030>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+
+      clocks = <&ccu_pll CCU_SATA_PLL>,
+               <&ccu_pll CCU_PCIE_PLL>,
+               <&ccu_pll CCU_ETH_PLL>;
+      clock-names = "sata_clk", "pcie_clk", "eth_clk";
+    };
+  # System Devices Clock Control Unit node:
+  - |
+    #include <dt-bindings/clock/bt1-ccu.h>
+
+    clock-controller@1f04d060 {
+      compatible = "baikal,bt1-ccu-sys";
+      reg = <0x1f04d060 0x0a0>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+
+      clocks = <&clk25m>,
+               <&ccu_pll CCU_SATA_PLL>,
+               <&ccu_pll CCU_PCIE_PLL>,
+               <&ccu_pll CCU_ETH_PLL>;
+      clock-names = "ref_clk", "sata_clk", "pcie_clk",
+                    "eth_clk";
+    };
+  # Required Clock Control Unit PLL node:
+  - |
+    ccu_pll: clock-controller@1f04d000 {
+      compatible = "baikal,bt1-ccu-pll";
+      reg = <0x1f04d000 0x028>;
+      #clock-cells = <1>;
+
+      clocks = <&clk25m>;
+      clock-names = "ref_clk";
+    };
+...

Documentation/devicetree/bindings/clock/baikal,bt1-ccu-pll.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/baikal,bt1-ccu-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 Clock Control Unit PLL
+
+maintainers:
+  - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+  Clocks Control Unit is the core of Baikal-T1 SoC System Controller
+  responsible for the chip subsystems clocking and resetting. The CCU is
+  connected with an external fixed rate oscillator, which signal is transformed
+  into clocks of various frequencies and then propagated to either individual
+  IP-blocks or to groups of blocks (clock domains). The transformation is done
+  by means of PLLs and gateable/non-gateable dividers embedded into the CCU.
+  It's logically divided into the next components:
+  1) External oscillator (normally XTAL's 25 MHz crystal oscillator, but
+     in general can provide any frequency supported by the CCU PLLs).
+  2) PLLs clocks generators (PLLs) - described in this binding file.
+  3) AXI-bus clock dividers (AXI).
+  4) System devices reference clock dividers (SYS).
+  which are connected with each other as shown on the next figure:
+
+          +---------------+
+          | Baikal-T1 CCU |
+          |   +----+------|- MIPS P5600 cores
+          | +-|PLLs|------|- DDR controller
+          | | +----+      |
+  +----+  | |  |  |       |
+  |XTAL|--|-+  |  | +---+-|
+  +----+  | |  |  +-|AXI|-|- AXI-bus
+          | |  |    +---+-|
+          | |  |          |
+          | |  +----+---+-|- APB-bus
+          | +-------|SYS|-|- Low-speed Devices
+          |         +---+-|- High-speed Devices
+          +---------------+
+
+  Each CCU sub-block is represented as a separate dts-node and has an
+  individual driver to be bound with.
+
+  In order to create signals of wide range frequencies the external oscillator
+  output is primarily connected to a set of CCU PLLs. There are five PLLs
+  to create a clock for the MIPS P5600 cores, the embedded DDR controller,
+  SATA, Ethernet and PCIe domains. The last three domains though named by the
+  biggest system interfaces in fact include nearly all of the rest SoC
+  peripherals. Each of the PLLs is based on True Circuits TSMC CLN28HPM core
+  with an interface wrapper (so called safe PLL' clocks switcher) to simplify
+  the PLL configuration procedure. The PLLs work as depicted on the next
+  diagram:
+
+      +--------------------------+
+      |                          |
+      +-->+---+    +---+   +---+ |  +---+   0|\
+  CLKF--->|/NF|--->|PFD|...|VCO|-+->|/OD|--->| |
+          +---+ +->+---+   +---+ /->+---+    | |--->CLKOUT
+  CLKOD---------C----------------+          1| |
+       +--------C--------------------------->|/
+       |        |                             ^
+  Rclk-+->+---+ |                             |
+  CLKR--->|/NR|-+                             |
+          +---+                               |
+  BYPASS--------------------------------------+
+  BWADJ--->
+
+  where Rclk is the reference clock coming  from XTAL, NR - reference clock
+  divider, NF - PLL clock multiplier, OD - VCO output clock divider, CLKOUT -
+  output clock, BWADJ is the PLL bandwidth adjustment parameter. At this moment
+  the binding supports the PLL dividers configuration in accordance with a
+  requested rate, while bypassing and bandwidth adjustment settings can be
+  added in future if it gets to be necessary.
+
+  The PLLs CLKOUT is then either directly connected with the corresponding
+  clocks consumer (like P5600 cores or DDR controller) or passed over a CCU
+  divider to create a signal required for the clock domain.
+
+  The CCU PLL dts-node uses the common clock bindings with no custom
+  parameters. The list of exported clocks can be found in
+  'include/dt-bindings/clock/bt1-ccu.h'. Since CCU PLL is a part of the
+  Baikal-T1 SoC System Controller its DT node is supposed to be a child of
+  later one.
+
+properties:
+  compatible:
+    const: baikal,bt1-ccu-pll
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clocks:
+    description: External reference clock
+    maxItems: 1
+
+  clock-names:
+    const: ref_clk
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - "#clock-cells"
+  - clocks
+  - clock-names
+
+examples:
+  # Clock Control Unit PLL node:
+  - |
+    clock-controller@1f04d000 {
+      compatible = "baikal,bt1-ccu-pll";
+      reg = <0x1f04d000 0x028>;
+      #clock-cells = <1>;
+
+      clocks = <&clk25m>;
+      clock-names = "ref_clk";
+    };
+  # Required external oscillator:
+  - |
+    clk25m: clock-oscillator-25m {
+      compatible = "fixed-clock";
+      #clock-cells = <0>;
+      clock-frequency  = <25000000>;
+      clock-output-names = "clk25m";
+    };
+...

Documentation/devicetree/bindings/clock/idt,versaclock5.txt

@@ -12,6 +12,7 @@ Required properties:
 		"idt,5p49v5933"
 		"idt,5p49v5935"
 		"idt,5p49v6901"
+		"idt,5p49v6965"
 - reg:		i2c device address, shall be 0x68 or 0x6a.
 - #clock-cells:	from common clock binding; shall be set to 1.
 - clocks:	from common clock binding; list of parent clock handles,

drivers/clk/Kconfig

@@ -362,6 +362,7 @@ config COMMON_CLK_FIXED_MMIO
 
 source "drivers/clk/actions/Kconfig"
 source "drivers/clk/analogbits/Kconfig"
+source "drivers/clk/baikal-t1/Kconfig"
 source "drivers/clk/bcm/Kconfig"
 source "drivers/clk/hisilicon/Kconfig"
 source "drivers/clk/imgtec/Kconfig"

drivers/clk/Makefile

@@ -75,6 +75,7 @@ obj-y					+= analogbits/
 obj-$(CONFIG_COMMON_CLK_AT91)		+= at91/
 obj-$(CONFIG_ARCH_ARTPEC)		+= axis/
 obj-$(CONFIG_ARC_PLAT_AXS10X)		+= axs10x/
+obj-$(CONFIG_CLK_BAIKAL_T1)		+= baikal-t1/
 obj-y					+= bcm/
 obj-$(CONFIG_ARCH_BERLIN)		+= berlin/
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci/

drivers/clk/baikal-t1/Kconfig

+# SPDX-License-Identifier: GPL-2.0-only
+config CLK_BAIKAL_T1
+	bool "Baikal-T1 Clocks Control Unit interface"
+	depends on (MIPS_BAIKAL_T1 && OF) || COMPILE_TEST
+	default MIPS_BAIKAL_T1
+	help
+	  Clocks Control Unit is the core of Baikal-T1 SoC System Controller
+	  responsible for the chip subsystems clocking and resetting. It
+	  consists of multiple global clock domains, which can be reset by
+	  means of the CCU control registers. These domains and devices placed
+	  in them are fed with clocks generated by a hierarchy of PLLs,
+	  configurable and fixed clock dividers. Enable this option to be able
+	  to select Baikal-T1 CCU PLLs and Dividers drivers.
+
+if CLK_BAIKAL_T1
+
+config CLK_BT1_CCU_PLL
+	bool "Baikal-T1 CCU PLLs support"
+	select MFD_SYSCON
+	default MIPS_BAIKAL_T1
+	help
+	  Enable this to support the PLLs embedded into the Baikal-T1 SoC
+	  System Controller. These are five PLLs placed at the root of the
+	  clocks hierarchy, right after an external reference oscillator
+	  (normally of 25MHz). They are used to generate high frequency
+	  signals, which are either directly wired to the consumers (like
+	  CPUs, DDR, etc.) or passed over the clock dividers to be only
+	  then used as an individual reference clock of a target device.
+
+config CLK_BT1_CCU_DIV
+	bool "Baikal-T1 CCU Dividers support"
+	select RESET_CONTROLLER
+	select MFD_SYSCON
+	default MIPS_BAIKAL_T1
+	help
+	  Enable this to support the CCU dividers used to distribute clocks
+	  between AXI-bus and system devices coming from CCU PLLs of Baikal-T1
+	  SoC. CCU dividers can be either configurable or with fixed divider,
+	  either gateable or ungateable. Some of the CCU dividers can be as well
+	  used to reset the domains they're supplying clock to.
+
+endif

drivers/clk/baikal-t1/Makefile

+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_CLK_BT1_CCU_PLL) += ccu-pll.o clk-ccu-pll.o
+obj-$(CONFIG_CLK_BT1_CCU_DIV) += ccu-div.o clk-ccu-div.o

drivers/clk/baikal-t1/ccu-div.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+ *
+ * Baikal-T1 CCU Dividers interface driver
+ */
+#ifndef __CLK_BT1_CCU_DIV_H__
+#define __CLK_BT1_CCU_DIV_H__
+
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+#include <linux/regmap.h>
+#include <linux/bits.h>
+#include <linux/of.h>
+
+/*
+ * CCU Divider private flags
+ * @CCU_DIV_SKIP_ONE: Due to some reason divider can't be set to 1.
+ *		      It can be 0 though, which is functionally the same.
+ * @CCU_DIV_SKIP_ONE_TO_THREE: For some reason divider can't be within [1,3].
+ *			       It can be either 0 or greater than 3.
+ * @CCU_DIV_LOCK_SHIFTED: Find lock-bit at non-standard position.
+ * @CCU_DIV_RESET_DOMAIN: Provide reset clock domain method.
+ */
+#define CCU_DIV_SKIP_ONE		BIT(1)
+#define CCU_DIV_SKIP_ONE_TO_THREE	BIT(2)
+#define CCU_DIV_LOCK_SHIFTED		BIT(3)
+#define CCU_DIV_RESET_DOMAIN		BIT(4)
+
+/*
+ * enum ccu_div_type - CCU Divider types
+ * @CCU_DIV_VAR: Clocks gate with variable divider.
+ * @CCU_DIV_GATE: Clocks gate with fixed divider.
+ * @CCU_DIV_FIXED: Ungateable clock with fixed divider.
+ */
+enum ccu_div_type {
+	CCU_DIV_VAR,
+	CCU_DIV_GATE,
+	CCU_DIV_FIXED
+};
+
+/*
+ * struct ccu_div_init_data - CCU Divider initialization data
+ * @id: Clocks private identifier.
+ * @name: Clocks name.
+ * @parent_name: Parent clocks name in a fw node.
+ * @base: Divider register base address with respect to the sys_regs base.
+ * @sys_regs: Baikal-T1 System Controller registers map.
+ * @np: Pointer to the node describing the CCU Dividers.
+ * @type: CCU divider type (variable, fixed with and without gate).
+ * @width: Divider width if it's variable.
+ * @divider: Divider fixed value.
+ * @flags: CCU Divider clock flags.
+ * @features: CCU Divider private features.
+ */
+struct ccu_div_init_data {
+	unsigned int id;
+	const char *name;
+	const char *parent_name;
+	unsigned int base;
+	struct regmap *sys_regs;
+	struct device_node *np;
+	enum ccu_div_type type;
+	union {
+		unsigned int width;
+		unsigned int divider;
+	};
+	unsigned long flags;
+	unsigned long features;
+};
+
+/*
+ * struct ccu_div - CCU Divider descriptor
+ * @hw: clk_hw of the divider.
+ * @id: Clock private identifier.
+ * @reg_ctl: Divider control register base address.
+ * @sys_regs: Baikal-T1 System Controller registers map.
+ * @lock: Divider state change spin-lock.
+ * @mask: Divider field mask.
+ * @divider: Divider fixed value.
+ * @flags: Divider clock flags.
+ * @features: CCU Divider private features.
+ */
+struct ccu_div {
+	struct clk_hw hw;
+	unsigned int id;
+	unsigned int reg_ctl;
+	struct regmap *sys_regs;
+	spinlock_t lock;
+	union {
+		u32 mask;
+		unsigned int divider;
+	};
+	unsigned long flags;
+	unsigned long features;
+};
+#define to_ccu_div(_hw) container_of(_hw, struct ccu_div, hw)
+
+static inline struct clk_hw *ccu_div_get_clk_hw(struct ccu_div *div)
+{
+	return div ? &div->hw : NULL;
+}
+
+struct ccu_div *ccu_div_hw_register(const struct ccu_div_init_data *init);
+
+void ccu_div_hw_unregister(struct ccu_div *div);
+
+int ccu_div_reset_domain(struct ccu_div *div);
+
+#endif /* __CLK_BT1_CCU_DIV_H__ */

drivers/clk/baikal-t1/ccu-pll.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+ *
+ * Baikal-T1 CCU PLL interface driver
+ */
+#ifndef __CLK_BT1_CCU_PLL_H__
+#define __CLK_BT1_CCU_PLL_H__
+
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+#include <linux/regmap.h>
+#include <linux/bits.h>
+#include <linux/of.h>
+
+/*
+ * struct ccu_pll_init_data - CCU PLL initialization data
+ * @id: Clock private identifier.
+ * @name: Clocks name.
+ * @parent_name: Clocks parent name in a fw node.
+ * @base: PLL registers base address with respect to the sys_regs base.
+ * @sys_regs: Baikal-T1 System Controller registers map.
+ * @np: Pointer to the node describing the CCU PLLs.
+ * @flags: PLL clock flags.
+ */
+struct ccu_pll_init_data {
+	unsigned int id;
+	const char *name;
+	const char *parent_name;
+	unsigned int base;
+	struct regmap *sys_regs;
+	struct device_node *np;
+	unsigned long flags;
+};
+
+/*
+ * struct ccu_pll - CCU PLL descriptor
+ * @hw: clk_hw of the PLL.
+ * @id: Clock private identifier.
+ * @reg_ctl: PLL control register base.
+ * @reg_ctl1: PLL control1 register base.
+ * @sys_regs: Baikal-T1 System Controller registers map.
+ * @lock: PLL state change spin-lock.
+ */
+struct ccu_pll {
+	struct clk_hw hw;
+	unsigned int id;
+	unsigned int reg_ctl;
+	unsigned int reg_ctl1;
+	struct regmap *sys_regs;
+	spinlock_t lock;
+};
+#define to_ccu_pll(_hw) container_of(_hw, struct ccu_pll, hw)
+
+static inline struct clk_hw *ccu_pll_get_clk_hw(struct ccu_pll *pll)
+{
+	return pll ? &pll->hw : NULL;
+}
+
+struct ccu_pll *ccu_pll_hw_register(const struct ccu_pll_init_data *init);
+
+void ccu_pll_hw_unregister(struct ccu_pll *pll);
+
+#endif /* __CLK_BT1_CCU_PLL_H__ */

drivers/clk/baikal-t1/clk-ccu-pll.c

+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+ *
+ * Authors:
+ *   Serge Semin <Sergey.Semin@baikalelectronics.ru>
+ *   Dmitry Dunaev <dmitry.dunaev@baikalelectronics.ru>
+ *
+ * Baikal-T1 CCU PLL clocks driver
+ */
+
+#define pr_fmt(fmt) "bt1-ccu-pll: " fmt
+
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/slab.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/ioport.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/bt1-ccu.h>
+
+#include "ccu-pll.h"
+
+#define CCU_CPU_PLL_BASE		0x000
+#define CCU_SATA_PLL_BASE		0x008
+#define CCU_DDR_PLL_BASE		0x010
+#define CCU_PCIE_PLL_BASE		0x018
+#define CCU_ETH_PLL_BASE		0x020
+
+#define CCU_PLL_INFO(_id, _name, _pname, _base, _flags)	\
+	{						\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _pname,			\
+		.base = _base,				\
+		.flags = _flags				\
+	}
+
+#define CCU_PLL_NUM			ARRAY_SIZE(pll_info)
+
+struct ccu_pll_info {
+	unsigned int id;
+	const char *name;
+	const char *parent_name;
+	unsigned int base;
+	unsigned long flags;
+};
+
+/*
+ * Mark as critical all PLLs except Ethernet one. CPU and DDR PLLs are sources
+ * of CPU cores and DDR controller reference clocks, due to which they
+ * obviously shouldn't be ever gated. SATA and PCIe PLLs are the parents of
+ * APB-bus and DDR controller AXI-bus clocks. If they are gated the system will
+ * be unusable.
+ */
+static const struct ccu_pll_info pll_info[] = {
+	CCU_PLL_INFO(CCU_CPU_PLL, "cpu_pll", "ref_clk", CCU_CPU_PLL_BASE,
+		     CLK_IS_CRITICAL),
+	CCU_PLL_INFO(CCU_SATA_PLL, "sata_pll", "ref_clk", CCU_SATA_PLL_BASE,
+		     CLK_IS_CRITICAL | CLK_SET_RATE_GATE),
+	CCU_PLL_INFO(CCU_DDR_PLL, "ddr_pll", "ref_clk", CCU_DDR_PLL_BASE,
+		     CLK_IS_CRITICAL | CLK_SET_RATE_GATE),
+	CCU_PLL_INFO(CCU_PCIE_PLL, "pcie_pll", "ref_clk", CCU_PCIE_PLL_BASE,
+		     CLK_IS_CRITICAL),
+	CCU_PLL_INFO(CCU_ETH_PLL, "eth_pll", "ref_clk", CCU_ETH_PLL_BASE,
+		     CLK_SET_RATE_GATE)
+};
+
+struct ccu_pll_data {
+	struct device_node *np;
+	struct regmap *sys_regs;
+	struct ccu_pll *plls[CCU_PLL_NUM];
+};
+
+static struct ccu_pll *ccu_pll_find_desc(struct ccu_pll_data *data,
+					 unsigned int clk_id)
+{
+	struct ccu_pll *pll;
+	int idx;
+
+	for (idx = 0; idx < CCU_PLL_NUM; ++idx) {
+		pll = data->plls[idx];
+		if (pll && pll->id == clk_id)
+			return pll;
+	}
+
+	return ERR_PTR(-EINVAL);
+}
+
+static struct ccu_pll_data *ccu_pll_create_data(struct device_node *np)
+{
+	struct ccu_pll_data *data;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return ERR_PTR(-ENOMEM);
+
+	data->np = np;
+
+	return data;
+}
+
+static void ccu_pll_free_data(struct ccu_pll_data *data)
+{
+	kfree(data);
+}
+
+static int ccu_pll_find_sys_regs(struct ccu_pll_data *data)
+{
+	data->sys_regs = syscon_node_to_regmap(data->np->parent);
+	if (IS_ERR(data->sys_regs)) {
+		pr_err("Failed to find syscon regs for '%s'\n",
+			of_node_full_name(data->np));
+		return PTR_ERR(data->sys_regs);
+	}
+
+	return 0;
+}
+
+static struct clk_hw *ccu_pll_of_clk_hw_get(struct of_phandle_args *clkspec,
+					    void *priv)
+{
+	struct ccu_pll_data *data = priv;
+	struct ccu_pll *pll;
+	unsigned int clk_id;
+
+	clk_id = clkspec->args[0];
+	pll = ccu_pll_find_desc(data, clk_id);
+	if (IS_ERR(pll)) {
+		pr_info("Invalid PLL clock ID %d specified\n", clk_id);
+		return ERR_CAST(pll);
+	}
+
+	return ccu_pll_get_clk_hw(pll);
+}
+
+static int ccu_pll_clk_register(struct ccu_pll_data *data)
+{
+	int idx, ret;
+
+	for (idx = 0; idx < CCU_PLL_NUM; ++idx) {
+		const struct ccu_pll_info *info = &pll_info[idx];
+		struct ccu_pll_init_data init = {0};
+
+		init.id = info->id;
+		init.name = info->name;
+		init.parent_name = info->parent_name;
+		init.base = info->base;
+		init.sys_regs = data->sys_regs;
+		init.np = data->np;
+		init.flags = info->flags;
+
+		data->plls[idx] = ccu_pll_hw_register(&init);
+		if (IS_ERR(data->plls[idx])) {
+			ret = PTR_ERR(data->plls[idx]);
+			pr_err("Couldn't register PLL hw '%s'\n",
+				init.name);
+			goto err_hw_unregister;
+		}
+	}
+
+	ret = of_clk_add_hw_provider(data->np, ccu_pll_of_clk_hw_get, data);
+	if (ret) {
+		pr_err("Couldn't register PLL provider of '%s'\n",
+			of_node_full_name(data->np));
+		goto err_hw_unregister;
+	}
+
+	return 0;
+
+err_hw_unregister:
+	for (--idx; idx >= 0; --idx)
+		ccu_pll_hw_unregister(data->plls[idx]);
+
+	return ret;
+}
+
+static __init void ccu_pll_init(struct device_node *np)
+{
+	struct ccu_pll_data *data;
+	int ret;
+
+	data = ccu_pll_create_data(np);
+	if (IS_ERR(data))
+		return;
+
+	ret = ccu_pll_find_sys_regs(data);
+	if (ret)
+		goto err_free_data;
+
+	ret = ccu_pll_clk_register(data);
+	if (ret)
+		goto err_free_data;
+
+	return;
+
+err_free_data:
+	ccu_pll_free_data(data);
+}
+CLK_OF_DECLARE(ccu_pll, "baikal,bt1-ccu-pll", ccu_pll_init);

drivers/clk/clk-hsdk-pll.c

@@ -53,35 +53,38 @@ struct hsdk_pll_cfg {
 	u32 fbdiv;
 	u32 odiv;
 	u32 band;
+	u32 bypass;
 };
 
 static const struct hsdk_pll_cfg asdt_pll_cfg[] = {
-	{ 100000000,  0, 11, 3, 0 },
-	{ 133000000,  0, 15, 3, 0 },
-	{ 200000000,  1, 47, 3, 0 },
-	{ 233000000,  1, 27, 2, 0 },
-	{ 300000000,  1, 35, 2, 0 },
-	{ 333000000,  1, 39, 2, 0 },
-	{ 400000000,  1, 47, 2, 0 },
-	{ 500000000,  0, 14, 1, 0 },
-	{ 600000000,  0, 17, 1, 0 },
-	{ 700000000,  0, 20, 1, 0 },
-	{ 800000000,  0, 23, 1, 0 },
-	{ 900000000,  1, 26, 0, 0 },
-	{ 1000000000, 1, 29, 0, 0 },
-	{ 1100000000, 1, 32, 0, 0 },
-	{ 1200000000, 1, 35, 0, 0 },
-	{ 1300000000, 1, 38, 0, 0 },
-	{ 1400000000, 1, 41, 0, 0 },
-	{ 1500000000, 1, 44, 0, 0 },
-	{ 1600000000, 1, 47, 0, 0 },
+	{ 100000000,  0, 11, 3, 0, 0 },
+	{ 133000000,  0, 15, 3, 0, 0 },
+	{ 200000000,  1, 47, 3, 0, 0 },
+	{ 233000000,  1, 27, 2, 0, 0 },
+	{ 300000000,  1, 35, 2, 0, 0 },
+	{ 333000000,  1, 39, 2, 0, 0 },
+	{ 400000000,  1, 47, 2, 0, 0 },
+	{ 500000000,  0, 14, 1, 0, 0 },
+	{ 600000000,  0, 17, 1, 0, 0 },
+	{ 700000000,  0, 20, 1, 0, 0 },
+	{ 800000000,  0, 23, 1, 0, 0 },
+	{ 900000000,  1, 26, 0, 0, 0 },
+	{ 1000000000, 1, 29, 0, 0, 0 },
+	{ 1100000000, 1, 32, 0, 0, 0 },
+	{ 1200000000, 1, 35, 0, 0, 0 },
+	{ 1300000000, 1, 38, 0, 0, 0 },
+	{ 1400000000, 1, 41, 0, 0, 0 },
+	{ 1500000000, 1, 44, 0, 0, 0 },
+	{ 1600000000, 1, 47, 0, 0, 0 },
 	{}
 };
 
 static const struct hsdk_pll_cfg hdmi_pll_cfg[] = {
-	{ 297000000,  0, 21, 2, 0 },
-	{ 540000000,  0, 19, 1, 0 },
-	{ 594000000,  0, 21, 1, 0 },
+	{ 27000000,   0, 0,  0, 0, 1 },
+	{ 148500000,  0, 21, 3, 0, 0 },
+	{ 297000000,  0, 21, 2, 0, 0 },
+	{ 540000000,  0, 19, 1, 0, 0 },
+	{ 594000000,  0, 21, 1, 0, 0 },
 	{}
 };
 
@@ -134,11 +137,16 @@ static inline void hsdk_pll_set_cfg(struct hsdk_pll_clk *clk,
 {
 	u32 val = 0;
 
-	/* Powerdown and Bypass bits should be cleared */
-	val |= cfg->idiv << CGU_PLL_CTRL_IDIV_SHIFT;
-	val |= cfg->fbdiv << CGU_PLL_CTRL_FBDIV_SHIFT;
-	val |= cfg->odiv << CGU_PLL_CTRL_ODIV_SHIFT;
-	val |= cfg->band << CGU_PLL_CTRL_BAND_SHIFT;
+	if (cfg->bypass) {
+		val = hsdk_pll_read(clk, CGU_PLL_CTRL);
+		val |= CGU_PLL_CTRL_BYPASS;
+	} else {
+		/* Powerdown and Bypass bits should be cleared */
+		val |= cfg->idiv << CGU_PLL_CTRL_IDIV_SHIFT;
+		val |= cfg->fbdiv << CGU_PLL_CTRL_FBDIV_SHIFT;
+		val |= cfg->odiv << CGU_PLL_CTRL_ODIV_SHIFT;
+		val |= cfg->band << CGU_PLL_CTRL_BAND_SHIFT;
+	}
 
 	dev_dbg(clk->dev, "write configuration: %#x\n", val);
 
@@ -172,14 +180,14 @@ static unsigned long hsdk_pll_recalc_rate(struct clk_hw *hw,
 
 	dev_dbg(clk->dev, "current configuration: %#x\n", val);
 
-	/* Check if PLL is disabled */
-	if (val & CGU_PLL_CTRL_PD)
-		return 0;
-
 	/* Check if PLL is bypassed */
 	if (val & CGU_PLL_CTRL_BYPASS)
 		return parent_rate;
 
+	/* Check if PLL is disabled */
+	if (val & CGU_PLL_CTRL_PD)
+		return 0;
+
 	/* input divider = reg.idiv + 1 */
 	idiv = 1 + ((val & CGU_PLL_CTRL_IDIV_MASK) >> CGU_PLL_CTRL_IDIV_SHIFT);
 	/* fb divider = 2*(reg.fbdiv + 1) */

drivers/clk/clk-versaclock5.c

@@ -124,6 +124,7 @@ enum vc5_model {
 	IDT_VC5_5P49V5933,
 	IDT_VC5_5P49V5935,
 	IDT_VC6_5P49V6901,
+	IDT_VC6_5P49V6965,
 };
 
 /* Structure to describe features of a particular VC5 model */
@@ -683,6 +684,7 @@ static int vc5_map_index_to_output(const enum vc5_model model,
 	case IDT_VC5_5P49V5925:
 	case IDT_VC5_5P49V5935:
 	case IDT_VC6_5P49V6901:
+	case IDT_VC6_5P49V6965:
 	default:
 		return n;
 	}
@@ -956,12 +958,20 @@ static const struct vc5_chip_info idt_5p49v6901_info = {
 	.flags = VC5_HAS_PFD_FREQ_DBL,
 };
 
+static const struct vc5_chip_info idt_5p49v6965_info = {
+	.model = IDT_VC6_5P49V6965,
+	.clk_fod_cnt = 4,
+	.clk_out_cnt = 5,
+	.flags = 0,
+};
+
 static const struct i2c_device_id vc5_id[] = {
 	{ "5p49v5923", .driver_data = IDT_VC5_5P49V5923 },
 	{ "5p49v5925", .driver_data = IDT_VC5_5P49V5925 },
 	{ "5p49v5933", .driver_data = IDT_VC5_5P49V5933 },
 	{ "5p49v5935", .driver_data = IDT_VC5_5P49V5935 },
 	{ "5p49v6901", .driver_data = IDT_VC6_5P49V6901 },
+	{ "5p49v6965", .driver_data = IDT_VC6_5P49V6965 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, vc5_id);
@@ -972,6 +982,7 @@ static const struct of_device_id clk_vc5_of_match[] = {
 	{ .compatible = "idt,5p49v5933", .data = &idt_5p49v5933_info },
 	{ .compatible = "idt,5p49v5935", .data = &idt_5p49v5935_info },
 	{ .compatible = "idt,5p49v6901", .data = &idt_5p49v6901_info },
+	{ .compatible = "idt,5p49v6965", .data = &idt_5p49v6965_info },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, clk_vc5_of_match);

drivers/clk/mediatek/Kconfig

@@ -117,6 +117,92 @@ config COMMON_CLK_MT2712_VENCSYS
 	---help---
 	  This driver supports MediaTek MT2712 vencsys clocks.
 
+config COMMON_CLK_MT6765
+       bool "Clock driver for MediaTek MT6765"
+       depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
+       select COMMON_CLK_MEDIATEK
+       default ARCH_MEDIATEK && ARM64
+       help
+         This driver supports MediaTek MT6765 basic clocks.
+
+config COMMON_CLK_MT6765_AUDIOSYS
+       bool "Clock driver for MediaTek MT6765 audiosys"
+       depends on COMMON_CLK_MT6765
+       help
+         This driver supports MediaTek MT6765 audiosys clocks.
+
+config COMMON_CLK_MT6765_CAMSYS
+       bool "Clock driver for MediaTek MT6765 camsys"
+       depends on COMMON_CLK_MT6765
+       help
+         This driver supports MediaTek MT6765 camsys clocks.
+
+config COMMON_CLK_MT6765_GCESYS
+       bool "Clock driver for MediaTek MT6765 gcesys"
+       depends on COMMON_CLK_MT6765
+       help
+         This driver supports MediaTek MT6765 gcesys clocks.
+
+config COMMON_CLK_MT6765_MMSYS
+       bool "Clock driver for MediaTek MT6765 mmsys"
+       depends on COMMON_CLK_MT6765
+       help
+         This driver supports MediaTek MT6765 mmsys clocks.
+
+config COMMON_CLK_MT6765_IMGSYS
+       bool "Clock driver for MediaTek MT6765 imgsys"
+       depends on COMMON_CLK_MT6765
+       help
+         This driver supports MediaTek MT6765 imgsys clocks.
+
+config COMMON_CLK_MT6765_VCODECSYS
+       bool "Clock driver for MediaTek MT6765 vcodecsys"
+       depends on COMMON_CLK_MT6765
+       help
+         This driver supports MediaTek MT6765 vcodecsys clocks.
+
+config COMMON_CLK_MT6765_MFGSYS
+       bool "Clock driver for MediaTek MT6765 mfgsys"
+       depends on COMMON_CLK_MT6765
+       help
+         This driver supports MediaTek MT6765 mfgsys clocks.
+
+config COMMON_CLK_MT6765_MIPI0ASYS
+       bool "Clock driver for MediaTek MT6765 mipi0asys"
+       depends on COMMON_CLK_MT6765
+       help
+         This driver supports MediaTek MT6765 mipi0asys clocks.
+
+config COMMON_CLK_MT6765_MIPI0BSYS
+       bool "Clock driver for MediaTek MT6765 mipi0bsys"
+       depends on COMMON_CLK_MT6765
+       help
+         This driver supports MediaTek MT6765 mipi0bsys clocks.
+
+config COMMON_CLK_MT6765_MIPI1ASYS
+       bool "Clock driver for MediaTek MT6765 mipi1asys"
+       depends on COMMON_CLK_MT6765
+       help
+         This driver supports MediaTek MT6765 mipi1asys clocks.
+
+config COMMON_CLK_MT6765_MIPI1BSYS
+       bool "Clock driver for MediaTek MT6765 mipi1bsys"
+       depends on COMMON_CLK_MT6765
+       help
+         This driver supports MediaTek MT6765 mipi1bsys clocks.
+
+config COMMON_CLK_MT6765_MIPI2ASYS
+       bool "Clock driver for MediaTek MT6765 mipi2asys"
+       depends on COMMON_CLK_MT6765
+      help
+         This driver supports MediaTek MT6765 mipi2asys clocks.
+
+config COMMON_CLK_MT6765_MIPI2BSYS
+       bool "Clock driver for MediaTek MT6765 mipi2bsys"
+       depends on COMMON_CLK_MT6765
+       help
+         This driver supports MediaTek MT6765 mipi2bsys clocks.
+
 config COMMON_CLK_MT6779
 	bool "Clock driver for MediaTek MT6779"
 	depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST

drivers/clk/mediatek/Makefile

 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_COMMON_CLK_MEDIATEK) += clk-mtk.o clk-pll.o clk-gate.o clk-apmixed.o clk-cpumux.o reset.o clk-mux.o
 
+obj-$(CONFIG_COMMON_CLK_MT6765) += clk-mt6765.o
+obj-$(CONFIG_COMMON_CLK_MT6765_AUDIOSYS) += clk-mt6765-audio.o
+obj-$(CONFIG_COMMON_CLK_MT6765_CAMSYS) += clk-mt6765-cam.o
+obj-$(CONFIG_COMMON_CLK_MT6765_IMGSYS) += clk-mt6765-img.o
+obj-$(CONFIG_COMMON_CLK_MT6765_MIPI0ASYS) += clk-mt6765-mipi0a.o
+obj-$(CONFIG_COMMON_CLK_MT6765_MMSYS) += clk-mt6765-mm.o
+obj-$(CONFIG_COMMON_CLK_MT6765_VCODECSYS) += clk-mt6765-vcodec.o
 obj-$(CONFIG_COMMON_CLK_MT6779) += clk-mt6779.o
 obj-$(CONFIG_COMMON_CLK_MT6779_MMSYS) += clk-mt6779-mm.o
 obj-$(CONFIG_COMMON_CLK_MT6779_IMGSYS) += clk-mt6779-img.o

drivers/clk/mediatek/clk-mt6765-audio.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Owen Chen <owen.chen@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt6765-clk.h>
+
+static const struct mtk_gate_regs audio0_cg_regs = {
+	.set_ofs = 0x0,
+	.clr_ofs = 0x0,
+	.sta_ofs = 0x0,
+};
+
+static const struct mtk_gate_regs audio1_cg_regs = {
+	.set_ofs = 0x4,
+	.clr_ofs = 0x4,
+	.sta_ofs = 0x4,
+};
+
+#define GATE_AUDIO0(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &audio0_cg_regs,		\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_no_setclr,	\
+	}
+
+#define GATE_AUDIO1(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &audio1_cg_regs,		\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_no_setclr,	\
+	}
+
+static const struct mtk_gate audio_clks[] = {
+	/* AUDIO0 */
+	GATE_AUDIO0(CLK_AUDIO_AFE, "aud_afe", "audio_ck", 2),
+	GATE_AUDIO0(CLK_AUDIO_22M, "aud_22m", "aud_engen1_ck", 8),
+	GATE_AUDIO0(CLK_AUDIO_APLL_TUNER, "aud_apll_tuner",
+		    "aud_engen1_ck", 19),
+	GATE_AUDIO0(CLK_AUDIO_ADC, "aud_adc", "audio_ck", 24),
+	GATE_AUDIO0(CLK_AUDIO_DAC, "aud_dac", "audio_ck", 25),
+	GATE_AUDIO0(CLK_AUDIO_DAC_PREDIS, "aud_dac_predis",
+		    "audio_ck", 26),
+	GATE_AUDIO0(CLK_AUDIO_TML, "aud_tml", "audio_ck", 27),
+	/* AUDIO1 */
+	GATE_AUDIO1(CLK_AUDIO_I2S1_BCLK, "aud_i2s1_bclk",
+		    "audio_ck", 4),
+	GATE_AUDIO1(CLK_AUDIO_I2S2_BCLK, "aud_i2s2_bclk",
+		    "audio_ck", 5),
+	GATE_AUDIO1(CLK_AUDIO_I2S3_BCLK, "aud_i2s3_bclk",
+		    "audio_ck", 6),
+	GATE_AUDIO1(CLK_AUDIO_I2S4_BCLK, "aud_i2s4_bclk",
+		    "audio_ck", 7),
+};
+
+static int clk_mt6765_audio_probe(struct platform_device *pdev)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+	struct device_node *node = pdev->dev.of_node;
+
+	clk_data = mtk_alloc_clk_data(CLK_AUDIO_NR_CLK);
+
+	mtk_clk_register_gates(node, audio_clks,
+			       ARRAY_SIZE(audio_clks), clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+
+	return r;
+}
+
+static const struct of_device_id of_match_clk_mt6765_audio[] = {
+	{ .compatible = "mediatek,mt6765-audsys", },
+	{}
+};
+
+static struct platform_driver clk_mt6765_audio_drv = {
+	.probe = clk_mt6765_audio_probe,
+	.driver = {
+		.name = "clk-mt6765-audio",
+		.of_match_table = of_match_clk_mt6765_audio,
+	},
+};
+
+builtin_platform_driver(clk_mt6765_audio_drv);

drivers/clk/mediatek/clk-mt6765-cam.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Owen Chen <owen.chen@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt6765-clk.h>
+
+static const struct mtk_gate_regs cam_cg_regs = {
+	.set_ofs = 0x4,
+	.clr_ofs = 0x8,
+	.sta_ofs = 0x0,
+};
+
+#define GATE_CAM(_id, _name, _parent, _shift) {		\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &cam_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_setclr,	\
+	}
+
+static const struct mtk_gate cam_clks[] = {
+	GATE_CAM(CLK_CAM_LARB3, "cam_larb3", "mm_ck", 0),
+	GATE_CAM(CLK_CAM_DFP_VAD, "cam_dfp_vad", "mm_ck", 1),
+	GATE_CAM(CLK_CAM, "cam", "mm_ck", 6),
+	GATE_CAM(CLK_CAMTG, "camtg", "mm_ck", 7),
+	GATE_CAM(CLK_CAM_SENINF, "cam_seninf", "mm_ck", 8),
+	GATE_CAM(CLK_CAMSV0, "camsv0", "mm_ck", 9),
+	GATE_CAM(CLK_CAMSV1, "camsv1", "mm_ck", 10),
+	GATE_CAM(CLK_CAMSV2, "camsv2", "mm_ck", 11),
+	GATE_CAM(CLK_CAM_CCU, "cam_ccu", "mm_ck", 12),
+};
+
+static int clk_mt6765_cam_probe(struct platform_device *pdev)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+	struct device_node *node = pdev->dev.of_node;
+
+	clk_data = mtk_alloc_clk_data(CLK_CAM_NR_CLK);
+
+	mtk_clk_register_gates(node, cam_clks, ARRAY_SIZE(cam_clks), clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+
+	return r;
+}
+
+static const struct of_device_id of_match_clk_mt6765_cam[] = {
+	{ .compatible = "mediatek,mt6765-camsys", },
+	{}
+};
+
+static struct platform_driver clk_mt6765_cam_drv = {
+	.probe = clk_mt6765_cam_probe,
+	.driver = {
+		.name = "clk-mt6765-cam",
+		.of_match_table = of_match_clk_mt6765_cam,
+	},
+};
+
+builtin_platform_driver(clk_mt6765_cam_drv);

drivers/clk/mediatek/clk-mt6765-img.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Owen Chen <owen.chen@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt6765-clk.h>
+
+static const struct mtk_gate_regs img_cg_regs = {
+	.set_ofs = 0x4,
+	.clr_ofs = 0x8,
+	.sta_ofs = 0x0,
+};
+
+#define GATE_IMG(_id, _name, _parent, _shift) {		\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &img_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_setclr,	\
+	}
+
+static const struct mtk_gate img_clks[] = {
+	GATE_IMG(CLK_IMG_LARB2, "img_larb2", "mm_ck", 0),
+	GATE_IMG(CLK_IMG_DIP, "img_dip", "mm_ck", 2),
+	GATE_IMG(CLK_IMG_FDVT, "img_fdvt", "mm_ck", 3),
+	GATE_IMG(CLK_IMG_DPE, "img_dpe", "mm_ck", 4),
+	GATE_IMG(CLK_IMG_RSC, "img_rsc", "mm_ck", 5),
+};
+
+static int clk_mt6765_img_probe(struct platform_device *pdev)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+	struct device_node *node = pdev->dev.of_node;
+
+	clk_data = mtk_alloc_clk_data(CLK_IMG_NR_CLK);
+
+	mtk_clk_register_gates(node, img_clks, ARRAY_SIZE(img_clks), clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+
+	return r;
+}
+
+static const struct of_device_id of_match_clk_mt6765_img[] = {
+	{ .compatible = "mediatek,mt6765-imgsys", },
+	{}
+};
+
+static struct platform_driver clk_mt6765_img_drv = {
+	.probe = clk_mt6765_img_probe,
+	.driver = {
+		.name = "clk-mt6765-img",
+		.of_match_table = of_match_clk_mt6765_img,
+	},
+};
+
+builtin_platform_driver(clk_mt6765_img_drv);

drivers/clk/mediatek/clk-mt6765-mipi0a.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Owen Chen <owen.chen@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt6765-clk.h>
+
+static const struct mtk_gate_regs mipi0a_cg_regs = {
+	.set_ofs = 0x80,
+	.clr_ofs = 0x80,
+	.sta_ofs = 0x80,
+};
+
+#define GATE_MIPI0A(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &mipi0a_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_no_setclr_inv,	\
+	}
+
+static const struct mtk_gate mipi0a_clks[] = {
+	GATE_MIPI0A(CLK_MIPI0A_CSR_CSI_EN_0A,
+		    "mipi0a_csr_0a", "f_fseninf_ck", 1),
+};
+
+static int clk_mt6765_mipi0a_probe(struct platform_device *pdev)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+	struct device_node *node = pdev->dev.of_node;
+
+	clk_data = mtk_alloc_clk_data(CLK_MIPI0A_NR_CLK);
+
+	mtk_clk_register_gates(node, mipi0a_clks,
+			       ARRAY_SIZE(mipi0a_clks), clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+
+	return r;
+}
+
+static const struct of_device_id of_match_clk_mt6765_mipi0a[] = {
+	{ .compatible = "mediatek,mt6765-mipi0a", },
+	{}
+};
+
+static struct platform_driver clk_mt6765_mipi0a_drv = {
+	.probe = clk_mt6765_mipi0a_probe,
+	.driver = {
+		.name = "clk-mt6765-mipi0a",
+		.of_match_table = of_match_clk_mt6765_mipi0a,
+	},
+};
+
+builtin_platform_driver(clk_mt6765_mipi0a_drv);

drivers/clk/mediatek/clk-mt6765-mm.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Owen Chen <owen.chen@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt6765-clk.h>
+
+static const struct mtk_gate_regs mm_cg_regs = {
+	.set_ofs = 0x104,
+	.clr_ofs = 0x108,
+	.sta_ofs = 0x100,
+};
+
+#define GATE_MM(_id, _name, _parent, _shift) {		\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &mm_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_setclr,	\
+	}
+
+static const struct mtk_gate mm_clks[] = {
+	/* MM */
+	GATE_MM(CLK_MM_MDP_RDMA0, "mm_mdp_rdma0", "mm_ck", 0),
+	GATE_MM(CLK_MM_MDP_CCORR0, "mm_mdp_ccorr0", "mm_ck", 1),
+	GATE_MM(CLK_MM_MDP_RSZ0, "mm_mdp_rsz0", "mm_ck", 2),
+	GATE_MM(CLK_MM_MDP_RSZ1, "mm_mdp_rsz1", "mm_ck", 3),
+	GATE_MM(CLK_MM_MDP_TDSHP0, "mm_mdp_tdshp0", "mm_ck", 4),
+	GATE_MM(CLK_MM_MDP_WROT0, "mm_mdp_wrot0", "mm_ck", 5),
+	GATE_MM(CLK_MM_MDP_WDMA0, "mm_mdp_wdma0", "mm_ck", 6),
+	GATE_MM(CLK_MM_DISP_OVL0, "mm_disp_ovl0", "mm_ck", 7),
+	GATE_MM(CLK_MM_DISP_OVL0_2L, "mm_disp_ovl0_2l", "mm_ck", 8),
+	GATE_MM(CLK_MM_DISP_RSZ0, "mm_disp_rsz0", "mm_ck", 9),
+	GATE_MM(CLK_MM_DISP_RDMA0, "mm_disp_rdma0", "mm_ck", 10),
+	GATE_MM(CLK_MM_DISP_WDMA0, "mm_disp_wdma0", "mm_ck", 11),
+	GATE_MM(CLK_MM_DISP_COLOR0, "mm_disp_color0", "mm_ck", 12),
+	GATE_MM(CLK_MM_DISP_CCORR0, "mm_disp_ccorr0", "mm_ck", 13),
+	GATE_MM(CLK_MM_DISP_AAL0, "mm_disp_aal0", "mm_ck", 14),
+	GATE_MM(CLK_MM_DISP_GAMMA0, "mm_disp_gamma0", "mm_ck", 15),
+	GATE_MM(CLK_MM_DISP_DITHER0, "mm_disp_dither0", "mm_ck", 16),
+	GATE_MM(CLK_MM_DSI0, "mm_dsi0", "mm_ck", 17),
+	GATE_MM(CLK_MM_FAKE_ENG, "mm_fake_eng", "mm_ck", 18),
+	GATE_MM(CLK_MM_SMI_COMMON, "mm_smi_common", "mm_ck", 19),
+	GATE_MM(CLK_MM_SMI_LARB0, "mm_smi_larb0", "mm_ck", 20),
+	GATE_MM(CLK_MM_SMI_COMM0, "mm_smi_comm0", "mm_ck", 21),
+	GATE_MM(CLK_MM_SMI_COMM1, "mm_smi_comm1", "mm_ck", 22),
+	GATE_MM(CLK_MM_CAM_MDP, "mm_cam_mdp_ck", "mm_ck", 23),
+	GATE_MM(CLK_MM_SMI_IMG, "mm_smi_img_ck", "mm_ck", 24),
+	GATE_MM(CLK_MM_SMI_CAM, "mm_smi_cam_ck", "mm_ck", 25),
+	GATE_MM(CLK_MM_IMG_DL_RELAY, "mm_img_dl_relay", "mm_ck", 26),
+	GATE_MM(CLK_MM_IMG_DL_ASYNC_TOP, "mm_imgdl_async", "mm_ck", 27),
+	GATE_MM(CLK_MM_DIG_DSI, "mm_dig_dsi_ck", "mm_ck", 28),
+	GATE_MM(CLK_MM_F26M_HRTWT, "mm_hrtwt", "f_f26m_ck", 29),
+};
+
+static int clk_mt6765_mm_probe(struct platform_device *pdev)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+	struct device_node *node = pdev->dev.of_node;
+
+	clk_data = mtk_alloc_clk_data(CLK_MM_NR_CLK);
+
+	mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks), clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+
+	return r;
+}
+
+static const struct of_device_id of_match_clk_mt6765_mm[] = {
+	{ .compatible = "mediatek,mt6765-mmsys", },
+	{}
+};
+
+static struct platform_driver clk_mt6765_mm_drv = {
+	.probe = clk_mt6765_mm_probe,
+	.driver = {
+		.name = "clk-mt6765-mm",
+		.of_match_table = of_match_clk_mt6765_mm,
+	},
+};
+
+builtin_platform_driver(clk_mt6765_mm_drv);

drivers/clk/mediatek/clk-mt6765-vcodec.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Owen Chen <owen.chen@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt6765-clk.h>
+
+static const struct mtk_gate_regs venc_cg_regs = {
+	.set_ofs = 0x4,
+	.clr_ofs = 0x8,
+	.sta_ofs = 0x0,
+};
+
+#define GATE_VENC(_id, _name, _parent, _shift) {	\
+		.id = _id,				\
+		.name = _name,				\
+		.parent_name = _parent,			\
+		.regs = &venc_cg_regs,			\
+		.shift = _shift,			\
+		.ops = &mtk_clk_gate_ops_setclr_inv,	\
+	}
+
+static const struct mtk_gate venc_clks[] = {
+	GATE_VENC(CLK_VENC_SET0_LARB, "venc_set0_larb", "mm_ck", 0),
+	GATE_VENC(CLK_VENC_SET1_VENC, "venc_set1_venc", "mm_ck", 4),
+	GATE_VENC(CLK_VENC_SET2_JPGENC, "jpgenc", "mm_ck", 8),
+	GATE_VENC(CLK_VENC_SET3_VDEC, "venc_set3_vdec", "mm_ck", 12),
+};
+
+static int clk_mt6765_vcodec_probe(struct platform_device *pdev)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+	struct device_node *node = pdev->dev.of_node;
+
+	clk_data = mtk_alloc_clk_data(CLK_VENC_NR_CLK);
+
+	mtk_clk_register_gates(node, venc_clks,
+			       ARRAY_SIZE(venc_clks), clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+
+	return r;
+}
+
+static const struct of_device_id of_match_clk_mt6765_vcodec[] = {
+	{ .compatible = "mediatek,mt6765-vcodecsys", },
+	{}
+};
+
+static struct platform_driver clk_mt6765_vcodec_drv = {
+	.probe = clk_mt6765_vcodec_probe,
+	.driver = {
+		.name = "clk-mt6765-vcodec",
+		.of_match_table = of_match_clk_mt6765_vcodec,
+	},
+};
+
+builtin_platform_driver(clk_mt6765_vcodec_drv);

drivers/clk/mediatek/clk-mux.c

@@ -160,7 +160,7 @@ struct clk *mtk_clk_register_mux(const struct mtk_mux *mux,
 				 spinlock_t *lock)
 {
 	struct mtk_clk_mux *clk_mux;
-	struct clk_init_data init;
+	struct clk_init_data init = {};
 	struct clk *clk;
 
 	clk_mux = kzalloc(sizeof(*clk_mux), GFP_KERNEL);

include/dt-bindings/clock/bt1-ccu.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+ *
+ * Baikal-T1 CCU clock indices
+ */
+#ifndef __DT_BINDINGS_CLOCK_BT1_CCU_H
+#define __DT_BINDINGS_CLOCK_BT1_CCU_H
+
+#define CCU_CPU_PLL			0
+#define CCU_SATA_PLL			1
+#define CCU_DDR_PLL			2
+#define CCU_PCIE_PLL			3
+#define CCU_ETH_PLL			4
+
+#define CCU_AXI_MAIN_CLK		0
+#define CCU_AXI_DDR_CLK			1
+#define CCU_AXI_SATA_CLK		2
+#define CCU_AXI_GMAC0_CLK		3
+#define CCU_AXI_GMAC1_CLK		4
+#define CCU_AXI_XGMAC_CLK		5
+#define CCU_AXI_PCIE_M_CLK		6
+#define CCU_AXI_PCIE_S_CLK		7
+#define CCU_AXI_USB_CLK			8
+#define CCU_AXI_HWA_CLK			9
+#define CCU_AXI_SRAM_CLK		10
+
+#define CCU_SYS_SATA_REF_CLK		0
+#define CCU_SYS_APB_CLK			1
+#define CCU_SYS_GMAC0_TX_CLK		2
+#define CCU_SYS_GMAC0_PTP_CLK		3
+#define CCU_SYS_GMAC1_TX_CLK		4
+#define CCU_SYS_GMAC1_PTP_CLK		5
+#define CCU_SYS_XGMAC_REF_CLK		6
+#define CCU_SYS_XGMAC_PTP_CLK		7
+#define CCU_SYS_USB_CLK			8
+#define CCU_SYS_PVT_CLK			9
+#define CCU_SYS_HWA_CLK			10
+#define CCU_SYS_UART_CLK		11
+#define CCU_SYS_I2C1_CLK		12
+#define CCU_SYS_I2C2_CLK		13
+#define CCU_SYS_GPIO_CLK		14
+#define CCU_SYS_TIMER0_CLK		15
+#define CCU_SYS_TIMER1_CLK		16
+#define CCU_SYS_TIMER2_CLK		17
+#define CCU_SYS_WDT_CLK			18
+
+#endif /* __DT_BINDINGS_CLOCK_BT1_CCU_H */

include/dt-bindings/clock/mt6765-clk.h

+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DT_BINDINGS_CLK_MT6765_H
+#define _DT_BINDINGS_CLK_MT6765_H
+
+/* FIX Clks */
+#define CLK_TOP_CLK26M			0
+
+/* APMIXEDSYS */
+#define CLK_APMIXED_ARMPLL_L		0
+#define CLK_APMIXED_ARMPLL		1
+#define CLK_APMIXED_CCIPLL		2
+#define CLK_APMIXED_MAINPLL		3
+#define CLK_APMIXED_MFGPLL		4
+#define CLK_APMIXED_MMPLL		5
+#define CLK_APMIXED_UNIV2PLL		6
+#define CLK_APMIXED_MSDCPLL		7
+#define CLK_APMIXED_APLL1		8
+#define CLK_APMIXED_MPLL		9
+#define CLK_APMIXED_ULPOSC1		10
+#define CLK_APMIXED_ULPOSC2		11
+#define CLK_APMIXED_SSUSB26M		12
+#define CLK_APMIXED_APPLL26M		13
+#define CLK_APMIXED_MIPIC0_26M		14
+#define CLK_APMIXED_MDPLLGP26M		15
+#define CLK_APMIXED_MMSYS_F26M		16
+#define CLK_APMIXED_UFS26M		17
+#define CLK_APMIXED_MIPIC1_26M		18
+#define CLK_APMIXED_MEMPLL26M		19
+#define CLK_APMIXED_CLKSQ_LVPLL_26M	20
+#define CLK_APMIXED_MIPID0_26M		21
+#define CLK_APMIXED_NR_CLK		22
+
+/* TOPCKGEN */
+#define CLK_TOP_SYSPLL			0
+#define CLK_TOP_SYSPLL_D2		1
+#define CLK_TOP_SYSPLL1_D2		2
+#define CLK_TOP_SYSPLL1_D4		3
+#define CLK_TOP_SYSPLL1_D8		4
+#define CLK_TOP_SYSPLL1_D16		5
+#define CLK_TOP_SYSPLL_D3		6
+#define CLK_TOP_SYSPLL2_D2		7
+#define CLK_TOP_SYSPLL2_D4		8
+#define CLK_TOP_SYSPLL2_D8		9
+#define CLK_TOP_SYSPLL_D5		10
+#define CLK_TOP_SYSPLL3_D2		11
+#define CLK_TOP_SYSPLL3_D4		12
+#define CLK_TOP_SYSPLL_D7		13
+#define CLK_TOP_SYSPLL4_D2		14
+#define CLK_TOP_SYSPLL4_D4		15
+#define CLK_TOP_USB20_192M		16
+#define CLK_TOP_USB20_192M_D4		17
+#define CLK_TOP_USB20_192M_D8		18
+#define CLK_TOP_USB20_192M_D16		19
+#define CLK_TOP_USB20_192M_D32		20
+#define CLK_TOP_UNIVPLL			21
+#define CLK_TOP_UNIVPLL_D2		22
+#define CLK_TOP_UNIVPLL1_D2		23
+#define CLK_TOP_UNIVPLL1_D4		24
+#define CLK_TOP_UNIVPLL_D3		25
+#define CLK_TOP_UNIVPLL2_D2		26
+#define CLK_TOP_UNIVPLL2_D4		27
+#define CLK_TOP_UNIVPLL2_D8		28
+#define CLK_TOP_UNIVPLL2_D32		29
+#define CLK_TOP_UNIVPLL_D5		30
+#define CLK_TOP_UNIVPLL3_D2		31
+#define CLK_TOP_UNIVPLL3_D4		32
+#define CLK_TOP_MMPLL			33
+#define CLK_TOP_MMPLL_D2		34
+#define CLK_TOP_MPLL			35
+#define CLK_TOP_DA_MPLL_104M_DIV	36
+#define CLK_TOP_DA_MPLL_52M_DIV		37
+#define CLK_TOP_MFGPLL			38
+#define CLK_TOP_MSDCPLL			39
+#define CLK_TOP_MSDCPLL_D2		40
+#define CLK_TOP_APLL1			41
+#define CLK_TOP_APLL1_D2		42
+#define CLK_TOP_APLL1_D4		43
+#define CLK_TOP_APLL1_D8		44
+#define CLK_TOP_ULPOSC1			45
+#define CLK_TOP_ULPOSC1_D2		46
+#define CLK_TOP_ULPOSC1_D4		47
+#define CLK_TOP_ULPOSC1_D8		48
+#define CLK_TOP_ULPOSC1_D16		49
+#define CLK_TOP_ULPOSC1_D32		50
+#define CLK_TOP_DMPLL			51
+#define CLK_TOP_F_FRTC			52
+#define CLK_TOP_F_F26M			53
+#define CLK_TOP_AXI			54
+#define CLK_TOP_MM			55
+#define CLK_TOP_SCP			56
+#define CLK_TOP_MFG			57
+#define CLK_TOP_F_FUART			58
+#define CLK_TOP_SPI			59
+#define CLK_TOP_MSDC50_0		60
+#define CLK_TOP_MSDC30_1		61
+#define CLK_TOP_AUDIO			62
+#define CLK_TOP_AUD_1			63
+#define CLK_TOP_AUD_ENGEN1		64
+#define CLK_TOP_F_FDISP_PWM		65
+#define CLK_TOP_SSPM			66
+#define CLK_TOP_DXCC			67
+#define CLK_TOP_I2C			68
+#define CLK_TOP_F_FPWM			69
+#define CLK_TOP_F_FSENINF		70
+#define CLK_TOP_AES_FDE			71
+#define CLK_TOP_F_BIST2FPC		72
+#define CLK_TOP_ARMPLL_DIVIDER_PLL0	73
+#define CLK_TOP_ARMPLL_DIVIDER_PLL1	74
+#define CLK_TOP_ARMPLL_DIVIDER_PLL2	75
+#define CLK_TOP_DA_USB20_48M_DIV	76
+#define CLK_TOP_DA_UNIV_48M_DIV		77
+#define CLK_TOP_APLL12_DIV0		78
+#define CLK_TOP_APLL12_DIV1		79
+#define CLK_TOP_APLL12_DIV2		80
+#define CLK_TOP_APLL12_DIV3		81
+#define CLK_TOP_ARMPLL_DIVIDER_PLL0_EN	82
+#define CLK_TOP_ARMPLL_DIVIDER_PLL1_EN	83
+#define CLK_TOP_ARMPLL_DIVIDER_PLL2_EN	84
+#define CLK_TOP_FMEM_OCC_DRC_EN		85
+#define CLK_TOP_USB20_48M_EN		86
+#define CLK_TOP_UNIVPLL_48M_EN		87
+#define CLK_TOP_MPLL_104M_EN		88
+#define CLK_TOP_MPLL_52M_EN		89
+#define CLK_TOP_F_UFS_MP_SAP_CFG_EN	90
+#define CLK_TOP_F_BIST2FPC_EN		91
+#define CLK_TOP_MD_32K			92
+#define CLK_TOP_MD_26M			93
+#define CLK_TOP_MD2_32K			94
+#define CLK_TOP_MD2_26M			95
+#define CLK_TOP_AXI_SEL			96
+#define CLK_TOP_MEM_SEL			97
+#define CLK_TOP_MM_SEL			98
+#define CLK_TOP_SCP_SEL			99
+#define CLK_TOP_MFG_SEL			100
+#define CLK_TOP_ATB_SEL			101
+#define CLK_TOP_CAMTG_SEL		102
+#define CLK_TOP_CAMTG1_SEL		103
+#define CLK_TOP_CAMTG2_SEL		104
+#define CLK_TOP_CAMTG3_SEL		105
+#define CLK_TOP_UART_SEL		106
+#define CLK_TOP_SPI_SEL			107
+#define CLK_TOP_MSDC50_0_HCLK_SEL	108
+#define CLK_TOP_MSDC50_0_SEL		109
+#define CLK_TOP_MSDC30_1_SEL		110
+#define CLK_TOP_AUDIO_SEL		111
+#define CLK_TOP_AUD_INTBUS_SEL		112
+#define CLK_TOP_AUD_1_SEL		113
+#define CLK_TOP_AUD_ENGEN1_SEL		114
+#define CLK_TOP_DISP_PWM_SEL		115
+#define CLK_TOP_SSPM_SEL		116
+#define CLK_TOP_DXCC_SEL		117
+#define CLK_TOP_USB_TOP_SEL		118
+#define CLK_TOP_SPM_SEL			119
+#define CLK_TOP_I2C_SEL			120
+#define CLK_TOP_PWM_SEL			121
+#define CLK_TOP_SENINF_SEL		122
+#define CLK_TOP_AES_FDE_SEL		123
+#define CLK_TOP_PWRAP_ULPOSC_SEL	124
+#define CLK_TOP_CAMTM_SEL		125
+#define CLK_TOP_NR_CLK			126
+
+/* INFRACFG */
+#define CLK_IFR_ICUSB			0
+#define CLK_IFR_GCE			1
+#define CLK_IFR_THERM			2
+#define CLK_IFR_I2C_AP			3
+#define CLK_IFR_I2C_CCU			4
+#define CLK_IFR_I2C_SSPM		5
+#define CLK_IFR_I2C_RSV			6
+#define CLK_IFR_PWM_HCLK		7
+#define CLK_IFR_PWM1			8
+#define CLK_IFR_PWM2			9
+#define CLK_IFR_PWM3			10
+#define CLK_IFR_PWM4			11
+#define CLK_IFR_PWM5			12
+#define CLK_IFR_PWM			13
+#define CLK_IFR_UART0			14
+#define CLK_IFR_UART1			15
+#define CLK_IFR_GCE_26M			16
+#define CLK_IFR_CQ_DMA_FPC		17
+#define CLK_IFR_BTIF			18
+#define CLK_IFR_SPI0			19
+#define CLK_IFR_MSDC0			20
+#define CLK_IFR_MSDC1			21
+#define CLK_IFR_TRNG			22
+#define CLK_IFR_AUXADC			23
+#define CLK_IFR_CCIF1_AP		24
+#define CLK_IFR_CCIF1_MD		25
+#define CLK_IFR_AUXADC_MD		26
+#define CLK_IFR_AP_DMA			27
+#define CLK_IFR_DEVICE_APC		28
+#define CLK_IFR_CCIF_AP			29
+#define CLK_IFR_AUDIO			30
+#define CLK_IFR_CCIF_MD			31
+#define CLK_IFR_RG_PWM_FBCLK6		32
+#define CLK_IFR_DISP_PWM		33
+#define CLK_IFR_CLDMA_BCLK		34
+#define CLK_IFR_AUDIO_26M_BCLK		35
+#define CLK_IFR_SPI1			36
+#define CLK_IFR_I2C4			37
+#define CLK_IFR_SPI2			38
+#define CLK_IFR_SPI3			39
+#define CLK_IFR_I2C5			40
+#define CLK_IFR_I2C5_ARBITER		41
+#define CLK_IFR_I2C5_IMM		42
+#define CLK_IFR_I2C1_ARBITER		43
+#define CLK_IFR_I2C1_IMM		44
+#define CLK_IFR_I2C2_ARBITER		45
+#define CLK_IFR_I2C2_IMM		46
+#define CLK_IFR_SPI4			47
+#define CLK_IFR_SPI5			48
+#define CLK_IFR_CQ_DMA			49
+#define CLK_IFR_FAES_FDE		50
+#define CLK_IFR_MSDC0_SELF		51
+#define CLK_IFR_MSDC1_SELF		52
+#define CLK_IFR_I2C6			53
+#define CLK_IFR_AP_MSDC0		54
+#define CLK_IFR_MD_MSDC0		55
+#define CLK_IFR_MSDC0_SRC		56
+#define CLK_IFR_MSDC1_SRC		57
+#define CLK_IFR_AES_TOP0_BCLK		58
+#define CLK_IFR_MCU_PM_BCLK		59
+#define CLK_IFR_CCIF2_AP		60
+#define CLK_IFR_CCIF2_MD		61
+#define CLK_IFR_CCIF3_AP		62
+#define CLK_IFR_CCIF3_MD		63
+#define CLK_IFR_NR_CLK			64
+
+/* AUDIO */
+#define CLK_AUDIO_AFE			0
+#define CLK_AUDIO_22M			1
+#define CLK_AUDIO_APLL_TUNER		2
+#define CLK_AUDIO_ADC			3
+#define CLK_AUDIO_DAC			4
+#define CLK_AUDIO_DAC_PREDIS		5
+#define CLK_AUDIO_TML			6
+#define CLK_AUDIO_I2S1_BCLK		7
+#define CLK_AUDIO_I2S2_BCLK		8
+#define CLK_AUDIO_I2S3_BCLK		9
+#define CLK_AUDIO_I2S4_BCLK		10
+#define CLK_AUDIO_NR_CLK		11
+
+/* MIPI_RX_ANA_CSI0A */
+
+#define CLK_MIPI0A_CSR_CSI_EN_0A	0
+#define CLK_MIPI0A_NR_CLK		1
+
+/* MMSYS_CONFIG */
+
+#define CLK_MM_MDP_RDMA0		0
+#define CLK_MM_MDP_CCORR0		1
+#define CLK_MM_MDP_RSZ0			2
+#define CLK_MM_MDP_RSZ1			3
+#define CLK_MM_MDP_TDSHP0		4
+#define CLK_MM_MDP_WROT0		5
+#define CLK_MM_MDP_WDMA0		6
+#define CLK_MM_DISP_OVL0		7
+#define CLK_MM_DISP_OVL0_2L		8
+#define CLK_MM_DISP_RSZ0		9
+#define CLK_MM_DISP_RDMA0		10
+#define CLK_MM_DISP_WDMA0		11
+#define CLK_MM_DISP_COLOR0		12
+#define CLK_MM_DISP_CCORR0		13
+#define CLK_MM_DISP_AAL0		14
+#define CLK_MM_DISP_GAMMA0		15
+#define CLK_MM_DISP_DITHER0		16
+#define CLK_MM_DSI0			17
+#define CLK_MM_FAKE_ENG			18
+#define CLK_MM_SMI_COMMON		19
+#define CLK_MM_SMI_LARB0		20
+#define CLK_MM_SMI_COMM0		21
+#define CLK_MM_SMI_COMM1		22
+#define CLK_MM_CAM_MDP			23
+#define CLK_MM_SMI_IMG			24
+#define CLK_MM_SMI_CAM			25
+#define CLK_MM_IMG_DL_RELAY		26
+#define CLK_MM_IMG_DL_ASYNC_TOP		27
+#define CLK_MM_DIG_DSI			28
+#define CLK_MM_F26M_HRTWT		29
+#define CLK_MM_NR_CLK			30
+
+/* IMGSYS */
+
+#define CLK_IMG_LARB2			0
+#define CLK_IMG_DIP			1
+#define CLK_IMG_FDVT			2
+#define CLK_IMG_DPE			3
+#define CLK_IMG_RSC			4
+#define CLK_IMG_NR_CLK			5
+
+/* VENCSYS */
+
+#define CLK_VENC_SET0_LARB		0
+#define CLK_VENC_SET1_VENC		1
+#define CLK_VENC_SET2_JPGENC		2
+#define CLK_VENC_SET3_VDEC		3
+#define CLK_VENC_NR_CLK			4
+
+/* CAMSYS */
+
+#define CLK_CAM_LARB3			0
+#define CLK_CAM_DFP_VAD			1
+#define CLK_CAM				2
+#define CLK_CAMTG			3
+#define CLK_CAM_SENINF			4
+#define CLK_CAMSV0			5
+#define CLK_CAMSV1			6
+#define CLK_CAMSV2			7
+#define CLK_CAM_CCU			8
+#define CLK_CAM_NR_CLK			9
+
+#endif /* _DT_BINDINGS_CLK_MT6765_H */

include/dt-bindings/reset/bt1-ccu.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+ *
+ * Baikal-T1 CCU reset indices
+ */
+#ifndef __DT_BINDINGS_RESET_BT1_CCU_H
+#define __DT_BINDINGS_RESET_BT1_CCU_H
+
+#define CCU_AXI_MAIN_RST		0
+#define CCU_AXI_DDR_RST			1
+#define CCU_AXI_SATA_RST		2
+#define CCU_AXI_GMAC0_RST		3
+#define CCU_AXI_GMAC1_RST		4
+#define CCU_AXI_XGMAC_RST		5
+#define CCU_AXI_PCIE_M_RST		6
+#define CCU_AXI_PCIE_S_RST		7
+#define CCU_AXI_USB_RST			8
+#define CCU_AXI_HWA_RST			9
+#define CCU_AXI_SRAM_RST		10
+
+#define CCU_SYS_SATA_REF_RST		0
+#define CCU_SYS_APB_RST			1
+
+#endif /* __DT_BINDINGS_RESET_BT1_CCU_H */