Merge tag 'omap-fixes-for-v3.4-rc3' of...

Merge tag 'omap-fixes-for-v3.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fix regression for bad uart muxing and oops when PM is not set.
Revert one softreset regression and few other minor fixes.

* tag 'omap-fixes-for-v3.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP1: DMTIMER: fix broken timer clock source selection
  ARM: OMAP: serial: Fix the ocp smart idlemode handling bug
  ARM: OMAP2+: UART: Fix incorrect population of default uart pads
  ARM: OMAP: sram: fix BUG in dpll code for !PM case
  ARM: OMAP2/3: VENC hwmods: Remove OCPIF_SWSUP_IDLE flag from VENC slave interface
  ARM: OMAP2+: hwmod: Revert "ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status"
  ARM: OMAP2+: hwmod: add softreset delay field and OMAP4 data
  ARM: OMAP1: mux: add missing include

arch/arm/mach-omap1/mux.c

@@ -27,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 
+#include <mach/hardware.h>
 
 #include <plat/mux.h>
 

arch/arm/mach-omap1/timer.c

@@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev,
 	int n = (pdev->id - 1) << 1;
 	u32 l;
 
-	l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+	l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
 	l |= source << n;
-	__raw_writel(l, MOD_CONF_CTRL_1);
+	omap_writel(l, MOD_CONF_CTRL_1);
 
 	return 0;
 }

arch/arm/mach-omap2/omap_hwmod.c

@@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 		goto dis_opt_clks;
 	_write_sysconfig(v, oh);
 
+	if (oh->class->sysc->srst_udelay)
+		udelay(oh->class->sysc->srst_udelay);
+
 	if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
 		omap_test_timeout((omap_hwmod_read(oh,
 						    oh->class->sysc->syss_offs)
@@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
  */
 int omap_hwmod_softreset(struct omap_hwmod *oh)
 {
-	if (!oh)
+	u32 v;
+	int ret;
+
+	if (!oh || !(oh->_sysc_cache))
 		return -EINVAL;
 
-	return _ocp_softreset(oh);
+	v = oh->_sysc_cache;
+	ret = _set_softreset(oh, &v);
+	if (ret)
+		goto error;
+	_write_sysconfig(v, oh);
+
+error:
+	return ret;
 }
 
 /**

arch/arm/mach-omap2/omap_hwmod_2420_data.c

@@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
 			.flags	= OMAP_FIREWALL_L4,
 		}
 	},
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 

arch/arm/mach-omap2/omap_hwmod_2430_data.c

@@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
 	.slave		= &omap2430_dss_venc_hwmod,
 	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
 			.flags	= OMAP_FIREWALL_L4,
 		}
 	},
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = {
 static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
+	/*
+	 * ISS needs 100 OCP clk cycles delay after a softreset before
+	 * accessing sysconfig again.
+	 * The lowest frequency at the moment for L3 bus is 100 MHz, so
+	 * 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
+	 *
+	 * TODO: Indicate errata when available.
+	 */
+	.srst_udelay	= 2,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
 			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |

arch/arm/mach-omap2/serial.c

@@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev)
 static void omap_uart_set_smartidle(struct platform_device *pdev)
 {
 	struct omap_device *od = to_omap_device(pdev);
+	u8 idlemode;
 
-	omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
+	if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+		idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+	else
+		idlemode = HWMOD_IDLEMODE_SMART;
+
+	omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
 }
 
 #else
@@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
-static struct omap_device_pad default_uart1_pads[] __initdata = {
-	{
-		.name	= "uart1_cts.uart1_cts",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_rts.uart1_rts",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_tx.uart1_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_rx.uart1_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_uart2_pads[] __initdata = {
-	{
-		.name	= "uart2_cts.uart2_cts",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_rts.uart2_rts",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_tx.uart2_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_rx.uart2_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_uart3_pads[] __initdata = {
-	{
-		.name	= "uart3_cts_rctx.uart3_cts_rctx",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_rts_sd.uart3_rts_sd",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_tx_irtx.uart3_tx_irtx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_rx_irrx.uart3_rx_irrx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
-	{
-		.name   = "gpmc_wait2.uart4_tx",
-		.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "gpmc_wait3.uart4_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-	},
-};
-
-static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
-	{
-		.name	= "uart4_tx.uart4_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart4_rx.uart4_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-	},
-};
-
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
 {
-	switch (bdata->id) {
-	case 0:
-		bdata->pads = default_uart1_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
-		break;
-	case 1:
-		bdata->pads = default_uart2_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
-		break;
-	case 2:
-		bdata->pads = default_uart3_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
-		break;
-	case 3:
-		if (cpu_is_omap44xx()) {
-			bdata->pads = default_omap4_uart4_pads;
-			bdata->pads_cnt =
-				ARRAY_SIZE(default_omap4_uart4_pads);
-		} else if (cpu_is_omap3630()) {
-			bdata->pads = default_omap36xx_uart4_pads;
-			bdata->pads_cnt =
-				ARRAY_SIZE(default_omap36xx_uart4_pads);
-		}
-		break;
-	default:
-		break;
-	}
 }
 #else
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}

arch/arm/plat-omap/include/plat/omap_hwmod.h

@@ -305,6 +305,7 @@ struct omap_hwmod_sysc_fields {
  * @rev_offs: IP block revision register offset (from module base addr)
  * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
  * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @srst_udelay: Delay needed after doing a softreset in usecs
  * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
  * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
  * @clockact: the default value of the module CLOCKACTIVITY bits
@@ -330,9 +331,10 @@ struct omap_hwmod_class_sysconfig {
 	u16 sysc_offs;
 	u16 syss_offs;
 	u16 sysc_flags;
+	struct omap_hwmod_sysc_fields *sysc_fields;
+	u8 srst_udelay;
 	u8 idlemodes;
 	u8 clockact;
-	struct omap_hwmod_sysc_fields *sysc_fields;
 };
 
 /**

arch/arm/plat-omap/sram.c

@@ -348,7 +348,6 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
 			sdrc_actim_ctrl_b_1, sdrc_mr_1);
 }
 
-#ifdef CONFIG_PM
 void omap3_sram_restore_context(void)
 {
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
@@ -358,17 +357,18 @@ void omap3_sram_restore_context(void)
 			       omap3_sram_configure_core_dpll_sz);
 	omap_push_sram_idle();
 }
-#endif /* CONFIG_PM */
-
-#endif /* CONFIG_ARCH_OMAP3 */
 
 static inline int omap34xx_sram_init(void)
 {
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 	omap3_sram_restore_context();
-#endif
 	return 0;
 }
+#else
+static inline int omap34xx_sram_init(void)
+{
+	return 0;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
 
 static inline int am33xx_sram_init(void)
 {