Skip to content

L
linux
Commit 235c7b9f authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc 

Pull main powerpc updates from Ben Herrenschmidt:
 "This time around, the powerpc merges are going to be a little bit more
  complicated than usual.

  This is the main pull request with most of the work for this merge
  window.  I will describe it a bit more further down.

  There is some additional cpuidle driver work, however I haven't
  included it in this tree as it depends on some work in tip/timer-core
  which Thomas accidentally forgot to put in a topic branch.  Since I
  didn't want to carry all of that tip timer stuff in powerpc -next, I
  setup a separate branch on top of Thomas tree with just that cpuidle
  driver in it, and Stephen has been carrying that in next separately
  for a while now.  I'll send a separate pull request for it.

  Additionally, two new pieces in this tree add users for a sysfs API
  that Tejun and Greg have been deprecating in drivers-core-next.
  Thankfully Greg reverted the patch that removes the old API so this
  merge can happen cleanly, but once merged, I will send a patch
  adjusting our new code to the new API so that Greg can send you the
  removal patch.

  Now as for the content of this branch, we have a lot of perf work for
  power8 new counters including support for our new "nest" counters
  (also called 24x7) under pHyp (not natively yet).

  We have new functionality when running under the OPAL firmware
  (non-virtualized or KVM host), such as access to the firmware error
  logs and service processor dumps, system parameters and sensors, along
  with a hwmon driver for the latter.

  There's also a bunch of bug fixes accross the board, some LE fixes,
  and a nice set of selftests for validating our various types of copy
  loops.

  On the Freescale side, we see mostly new chip/board revisions, some
  clock updates, better support for machine checks and debug exceptions,
  etc..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits)
  powerpc/book3s: Fix CFAR clobbering issue in machine check handler.
  powerpc/compat: 32-bit little endian machine name is ppcle, not ppc
  powerpc/le: Big endian arguments for ppc_rtas()
  powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n)
  powerpc/defconfigs: Enable THP in pseries defconfig
  powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split
  powerpc: Rate-limit users spamming kernel log buffer
  powerpc/perf: Fix handling of L3 events with bank == 1
  powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes
  powerpc/perf: Add kconfig option for hypervisor provided counters
  powerpc/perf: Add support for the hv 24x7 interface
  powerpc/perf: Add support for the hv gpci (get performance counter info) interface
  powerpc/perf: Add macros for defining event fields & formats
  powerpc/perf: Add a shared interface to get gpci version and capabilities
  powerpc/perf: Add 24x7 interface headers
  powerpc/perf: Add hv_gpci interface header
  powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info)
  sysfs: create bin_attributes under the requested group
  powerpc/perf: Enable BHRB access for EBB events
  powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB
  ...
parents bdfc7cbd cd427485
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 5950 additions and 924 deletions
Documentation/ABI/stable/sysfs-firmware-opal-dump 0 → 100644
View file @ 235c7b9f
What: /sys/firmware/opal/dump
Date: Feb 2014
Contact: Stewart Smith <stewart@linux.vnet.ibm.com>
Description:
This directory exposes interfaces for interacting with
the FSP and platform dumps through OPAL firmware interface.
This is only for the powerpc/powernv platform.
initiate_dump: When '1' is written to it,
we will initiate a dump.
Read this file for supported commands.
0xXX-0xYYYY: A directory for dump of type 0xXX and
id 0xYYYY (in hex). The name of this
directory should not be relied upon to
be in this format, only that it's unique
among all dumps. For determining the type
and ID of the dump, use the id and type files.
Do not rely on any particular size of dump
type or dump id.
Each dump has the following files:
id: An ASCII representation of the dump ID
in hex (e.g. '0x01')
type: An ASCII representation of the type of
dump in the format "0x%x %s" with the ID
in hex and a description of the dump type
(or 'unknown').
Type '0xffffffff unknown' is used when
we could not get the type from firmware.
e.g. '0x02 System/Platform Dump'
dump: A binary file containing the dump.
The size of the dump is the size of this file.
acknowledge: When 'ack' is written to this, we will
acknowledge that we've retrieved the
dump to the service processor. It will
then remove it, making the dump
inaccessible.
Reading this file will get a list of
supported actions.
Documentation/ABI/stable/sysfs-firmware-opal-elog 0 → 100644
View file @ 235c7b9f
What: /sys/firmware/opal/elog
Date: Feb 2014
Contact: Stewart Smith <stewart@linux.vnet.ibm.com>
Description:
This directory exposes error log entries retrieved
through the OPAL firmware interface.
Each error log is identified by a unique ID and will
exist until explicitly acknowledged to firmware.
Each log entry has a directory in /sys/firmware/opal/elog.
Log entries may be purged by the service processor
before retrieved by firmware or retrieved/acknowledged by
Linux if there is no room for more log entries.
In the event that Linux has retrieved the log entries
but not explicitly acknowledged them to firmware and
the service processor needs more room for log entries,
the only remaining copy of a log message may be in
Linux.
Typically, a user space daemon will monitor for new
entries, read them out and acknowledge them.
The service processor may be able to store more log
entries than firmware can, so after you acknowledge
an event from Linux you may instantly get another one
from the queue that was generated some time in the past.
The raw log format is a binary format. We currently
do not parse this at all in kernel, leaving it up to
user space to solve the problem. In future, we may
do more parsing in kernel and add more files to make
it easier for simple user space processes to extract
more information.
For each log entry (directory), there are the following
files:
id: An ASCII representation of the ID of the
error log, in hex - e.g. "0x01".
type: An ASCII representation of the type id and
description of the type of error log.
Currently just "0x00 PEL" - platform error log.
In the future there may be additional types.
raw: A read-only binary file that can be read
to get the raw log entry. These are
<16kb, often just hundreds of bytes and
"average" 2kb.
acknowledge: Writing 'ack' to this file will acknowledge
the error log to firmware (and in turn
the service processor, if applicable).
Shortly after acknowledging it, the log
entry will be removed from sysfs.
Reading this file will list the supported
operations (curently just acknowledge).
\ No newline at end of file
Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 0 → 100644
View file @ 235c7b9f
What: /sys/bus/event_source/devices/hv_24x7/interface/catalog
Date: February 2014
Contact: Cody P Schafer <cody@linux.vnet.ibm.com>
Description:
Provides access to the binary "24x7 catalog" provided by the
hypervisor on POWER7 and 8 systems. This catalog lists events
avaliable from the powerpc "hv_24x7" pmu. Its format is
documented here:
https://raw.githubusercontent.com/jmesmon/catalog-24x7/master/hv-24x7-catalog.h
What: /sys/bus/event_source/devices/hv_24x7/interface/catalog_length
Date: February 2014
Contact: Cody P Schafer <cody@linux.vnet.ibm.com>
Description:
A number equal to the length in bytes of the catalog. This is
also extractable from the provided binary "catalog" sysfs entry.
What: /sys/bus/event_source/devices/hv_24x7/interface/catalog_version
Date: February 2014
Contact: Cody P Schafer <cody@linux.vnet.ibm.com>
Description:
Exposes the "version" field of the 24x7 catalog. This is also
extractable from the provided binary "catalog" sysfs entry.
Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_gpci 0 → 100644
View file @ 235c7b9f
What: /sys/bus/event_source/devices/hv_gpci/interface/collect_privileged
Date: February 2014
Contact: Cody P Schafer <cody@linux.vnet.ibm.com>
Description:
'0' if the hypervisor is configured to forbid access to event
counters being accumulated by other guests and to physical
domain event counters.
'1' if that access is allowed.
What: /sys/bus/event_source/devices/hv_gpci/interface/ga
Date: February 2014
Contact: Cody P Schafer <cody@linux.vnet.ibm.com>
Description:
0 or 1. Indicates whether we have access to "GA" events (listed
in arch/powerpc/perf/hv-gpci.h).
What: /sys/bus/event_source/devices/hv_gpci/interface/expanded
Date: February 2014
Contact: Cody P Schafer <cody@linux.vnet.ibm.com>
Description:
0 or 1. Indicates whether we have access to "EXPANDED" events (listed
in arch/powerpc/perf/hv-gpci.h).
What: /sys/bus/event_source/devices/hv_gpci/interface/lab
Date: February 2014
Contact: Cody P Schafer <cody@linux.vnet.ibm.com>
Description:
0 or 1. Indicates whether we have access to "LAB" events (listed
in arch/powerpc/perf/hv-gpci.h).
What: /sys/bus/event_source/devices/hv_gpci/interface/version
Date: February 2014
Contact: Cody P Schafer <cody@linux.vnet.ibm.com>
Description:
A number indicating the version of the gpci interface that the
hypervisor reports supporting.
What: /sys/bus/event_source/devices/hv_gpci/interface/kernel_version
Date: February 2014
Contact: Cody P Schafer <cody@linux.vnet.ibm.com>
Description:
A number indicating the latest version of the gpci interface
that the kernel is aware of.
Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt 0 → 100644
View file @ 235c7b9f
Freescale L2 Cache Controller
L2 cache is present in Freescale's QorIQ and QorIQ Qonverge platforms.
The cache bindings explained below are ePAPR compliant
Required Properties:
- compatible : Should include "fsl,chip-l2-cache-controller" and "cache"
where chip is the processor (bsc9132, npc8572 etc.)
- reg : Address and size of L2 cache controller registers
- cache-size : Size of the entire L2 cache
- interrupts : Error interrupt of L2 controller
- cache-line-size : Size of L2 cache lines
Example:
L2: l2-cache-controller@20000 {
compatible = "fsl,bsc9132-l2-cache-controller", "cache";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x40000>; // L2,256K
interrupts = <16 2 1 0>;
};
Documentation/devicetree/bindings/powerpc/fsl/mem-ctrlr.txt 0 → 100644
View file @ 235c7b9f
Freescale DDR memory controller
Properties:
- compatible : Should include "fsl,chip-memory-controller" where
chip is the processor (bsc9132, mpc8572 etc.), or
"fsl,qoriq-memory-controller".
- reg : Address and size of DDR controller registers
- interrupts : Error interrupt of DDR controller
Example 1:
memory-controller@2000 {
compatible = "fsl,bsc9132-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <16 2 1 8>;
};
Example 2:
ddr1: memory-controller@8000 {
compatible = "fsl,qoriq-memory-controller-v4.7",
"fsl,qoriq-memory-controller";
reg = <0x8000 0x1000>;
interrupts = <16 2 1 23>;
};
Documentation/devicetree/bindings/usb/fsl-usb.txt
View file @ 235c7b9f
......@@ -8,7 +8,9 @@ and additions :
Required properties :
- compatible : Should be "fsl-usb2-mph" for multi port host USB
controllers, or "fsl-usb2-dr" for dual role USB controllers
or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121
or "fsl,mpc5121-usb2-dr" for dual role USB controllers of MPC5121.
Wherever applicable, the IP version of the USB controller should
also be mentioned (for eg. fsl-usb2-dr-v2.2 for bsc9132).
- phy_type : For multi port host USB controllers, should be one of
"ulpi", or "serial". For dual role USB controllers, should be
one of "ulpi", "utmi", "utmi_wide", or "serial".
......
MAINTAINERS
View file @ 235c7b9f
......@@ -5254,11 +5254,10 @@ F: arch/powerpc/platforms/512x/
F: arch/powerpc/platforms/52xx/
LINUX FOR POWERPC EMBEDDED PPC4XX
M: Josh Boyer <jwboyer@gmail.com>
M: Alistair Popple <alistair@popple.id.au>
M: Matt Porter <mporter@kernel.crashing.org>
W: http://www.penguinppc.org/
L: linuxppc-dev@lists.ozlabs.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
S: Maintained
F: arch/powerpc/platforms/40x/
F: arch/powerpc/platforms/44x/
......
arch/powerpc/Kconfig
View file @ 235c7b9f
......@@ -618,6 +618,15 @@ config CMDLINE
some command-line options at build time by entering them here. In
most cases you will need to specify the root device here.
config CMDLINE_FORCE
bool "Always use the default kernel command string"
depends on CMDLINE_BOOL
help
Always use the default kernel command string, even if the boot
loader passes other arguments to the kernel.
This is useful if you cannot or don't want to change the
command-line options your boot loader passes to the kernel.
config EXTRA_TARGETS
string "Additional default image types"
help
......
arch/powerpc/boot/Makefile
View file @ 235c7b9f
......@@ -54,7 +54,7 @@ zlib := inffast.c inflate.c inftrees.c
zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
zliblinuxheader := zlib.h zconf.h zutil.h
$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o): \
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
......@@ -95,7 +95,7 @@ src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
cuboot-c2k.c gamecube-head.S \
gamecube.c wii-head.S wii.c holly.c \
prpmc2800.c fixed-head.S mvme5100.c
fixed-head.S mvme5100.c
src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
......@@ -204,7 +204,6 @@ image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
image-$(CONFIG_PPC_HOLLY) += dtbImage.holly
image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
image-$(CONFIG_EPAPR_BOOT) += zImage.epapr
......
arch/powerpc/boot/dts/fsl/b4420si-post.dtsi
View file @ 235c7b9f
......@@ -86,6 +86,42 @@ guts: global-utilities@e0000 {
clockgen: global-utilities@e1000 {
compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0";
ranges = <0x0 0xe1000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
sysclk: sysclk {
#clock-cells = <0>;
compatible = "fsl,qoriq-sysclk-2.0";
clock-output-names = "sysclk";
};
pll0: pll0@800 {
#clock-cells = <1>;
reg = <0x800 0x4>;
compatible = "fsl,qoriq-core-pll-2.0";
clocks = <&sysclk>;
clock-output-names = "pll0", "pll0-div2", "pll0-div4";
};
pll1: pll1@820 {
#clock-cells = <1>;
reg = <0x820 0x4>;
compatible = "fsl,qoriq-core-pll-2.0";
clocks = <&sysclk>;
clock-output-names = "pll1", "pll1-div2", "pll1-div4";
};
mux0: mux0@0 {
#clock-cells = <0>;
reg = <0x0 0x4>;
compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
<&pll1 0>, <&pll1 1>, <&pll1 2>;
clock-names = "pll0", "pll0-div2", "pll0-div4",
"pll1", "pll1-div2", "pll1-div4";
clock-output-names = "cmux0";
};
};
rcpm: global-utilities@e2000 {
......
arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi
View file @ 235c7b9f
......@@ -64,11 +64,13 @@ cpus {
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
clocks = <&mux0>;
next-level-cache = <&L2>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
clocks = <&mux0>;
next-level-cache = <&L2>;
};
};
......
arch/powerpc/boot/dts/fsl/b4860si-post.dtsi
View file @ 235c7b9f
......@@ -130,6 +130,42 @@ guts: global-utilities@e0000 {
clockgen: global-utilities@e1000 {
compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0";
ranges = <0x0 0xe1000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
sysclk: sysclk {
#clock-cells = <0>;
compatible = "fsl,qoriq-sysclk-2.0";
clock-output-names = "sysclk";
};
pll0: pll0@800 {
#clock-cells = <1>;
reg = <0x800 0x4>;
compatible = "fsl,qoriq-core-pll-2.0";
clocks = <&sysclk>;
clock-output-names = "pll0", "pll0-div2", "pll0-div4";
};
pll1: pll1@820 {
#clock-cells = <1>;
reg = <0x820 0x4>;
compatible = "fsl,qoriq-core-pll-2.0";
clocks = <&sysclk>;
clock-output-names = "pll1", "pll1-div2", "pll1-div4";
};
mux0: mux0@0 {
#clock-cells = <0>;
reg = <0x0 0x4>;
compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
<&pll1 0>, <&pll1 1>, <&pll1 2>;
clock-names = "pll0", "pll0-div2", "pll0-div4",
"pll1", "pll1-div2", "pll1-div4";
clock-output-names = "cmux0";
};
};
rcpm: global-utilities@e2000 {
......
arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi
View file @ 235c7b9f
......@@ -64,21 +64,25 @@ cpus {
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
clocks = <&mux0>;
next-level-cache = <&L2>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
clocks = <&mux0>;
next-level-cache = <&L2>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
clocks = <&mux0>;
next-level-cache = <&L2>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
clocks = <&mux0>;
next-level-cache = <&L2>;
};
};
......
arch/powerpc/boot/dts/fsl/p2041si-post.dtsi
View file @ 235c7b9f
......@@ -306,8 +306,68 @@ pins: global-utilities@e0e00 {
clockgen: global-utilities@e1000 {
compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
#address-cells = <1>;
#size-cells = <1>;
sysclk: sysclk {
#clock-cells = <0>;
compatible = "fsl,qoriq-sysclk-1.0";
clock-output-names = "sysclk";
};
pll0: pll0@800 {
#clock-cells = <1>;
reg = <0x800 0x4>;
compatible = "fsl,qoriq-core-pll-1.0";
clocks = <&sysclk>;
clock-output-names = "pll0", "pll0-div2";
};
pll1: pll1@820 {
#clock-cells = <1>;
reg = <0x820 0x4>;
compatible = "fsl,qoriq-core-pll-1.0";
clocks = <&sysclk>;
clock-output-names = "pll1", "pll1-div2";
};
mux0: mux0@0 {
#clock-cells = <0>;
reg = <0x0 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux0";
};
mux1: mux1@20 {
#clock-cells = <0>;
reg = <0x20 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux1";
};
mux2: mux2@40 {
#clock-cells = <0>;
reg = <0x40 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
};
mux3: mux3@60 {
#clock-cells = <0>;
reg = <0x60 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux3";
};
};
rcpm: global-utilities@e2000 {
......
arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi
View file @ 235c7b9f
......@@ -81,6 +81,7 @@ cpus {
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
clocks = <&mux0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
......@@ -89,6 +90,7 @@ L2_0: l2-cache {
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
clocks = <&mux1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
......@@ -97,6 +99,7 @@ L2_1: l2-cache {
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
clocks = <&mux2>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
......@@ -105,6 +108,7 @@ L2_2: l2-cache {
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
clocks = <&mux3>;
next-level-cache = <&L2_3>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
......
arch/powerpc/boot/dts/fsl/p3041si-post.dtsi
View file @ 235c7b9f
......@@ -333,8 +333,69 @@ pins: global-utilities@e0e00 {
clockgen: global-utilities@e1000 {
compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
#address-cells = <1>;
#size-cells = <1>;
sysclk: sysclk {
#clock-cells = <0>;
compatible = "fsl,qoriq-sysclk-1.0";
clock-output-names = "sysclk";
};
pll0: pll0@800 {
#clock-cells = <1>;
reg = <0x800 0x4>;
compatible = "fsl,qoriq-core-pll-1.0";
clocks = <&sysclk>;
clock-output-names = "pll0", "pll0-div2";
};
pll1: pll1@820 {
#clock-cells = <1>;
reg = <0x820 0x4>;
compatible = "fsl,qoriq-core-pll-1.0";
clocks = <&sysclk>;
clock-output-names = "pll1", "pll1-div2";
};
mux0: mux0@0 {
#clock-cells = <0>;
reg = <0x0 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux0";
};
mux1: mux1@20 {
#clock-cells = <0>;
reg = <0x20 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux1";
};
mux2: mux2@40 {
#clock-cells = <0>;
reg = <0x40 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux2";
};
mux3: mux3@60 {
#clock-cells = <0>;
reg = <0x60 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux3";
};
};
rcpm: global-utilities@e2000 {
......
arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi
View file @ 235c7b9f
......@@ -82,6 +82,7 @@ cpus {
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
clocks = <&mux0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
......@@ -90,6 +91,7 @@ L2_0: l2-cache {
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
clocks = <&mux1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
......@@ -98,6 +100,7 @@ L2_1: l2-cache {
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
clocks = <&mux2>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
......@@ -106,6 +109,7 @@ L2_2: l2-cache {
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
clocks = <&mux3>;
next-level-cache = <&L2_3>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
......
arch/powerpc/boot/dts/fsl/p4080si-post.dtsi
View file @ 235c7b9f
......@@ -353,8 +353,121 @@ pins: global-utilities@e0e00 {
clockgen: global-utilities@e1000 {
compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
#address-cells = <1>;
#size-cells = <1>;
sysclk: sysclk {
#clock-cells = <0>;
compatible = "fsl,qoriq-sysclk-1.0";
clock-output-names = "sysclk";
};
pll0: pll0@800 {
#clock-cells = <1>;
reg = <0x800 0x4>;
compatible = "fsl,qoriq-core-pll-1.0";
clocks = <&sysclk>;
clock-output-names = "pll0", "pll0-div2";
};
pll1: pll1@820 {
#clock-cells = <1>;
reg = <0x820 0x4>;
compatible = "fsl,qoriq-core-pll-1.0";
clocks = <&sysclk>;
clock-output-names = "pll1", "pll1-div2";
};
pll2: pll2@840 {
#clock-cells = <1>;
reg = <0x840 0x4>;
compatible = "fsl,qoriq-core-pll-1.0";
clocks = <&sysclk>;
clock-output-names = "pll2", "pll2-div2";
};
pll3: pll3@860 {
#clock-cells = <1>;
reg = <0x860 0x4>;
compatible = "fsl,qoriq-core-pll-1.0";
clocks = <&sysclk>;
clock-output-names = "pll3", "pll3-div2";
};
mux0: mux0@0 {
#clock-cells = <0>;
reg = <0x0 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux0";
};
mux1: mux1@20 {
#clock-cells = <0>;
reg = <0x20 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux1";
};
mux2: mux2@40 {
#clock-cells = <0>;
reg = <0x40 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux2";
};
mux3: mux3@60 {
#clock-cells = <0>;
reg = <0x60 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux3";
};
mux4: mux4@80 {
#clock-cells = <0>;
reg = <0x80 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
clock-output-names = "cmux4";
};
mux5: mux5@a0 {
#clock-cells = <0>;
reg = <0xa0 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
clock-output-names = "cmux5";
};
mux6: mux6@c0 {
#clock-cells = <0>;
reg = <0xc0 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
clock-output-names = "cmux6";
};
mux7: mux7@e0 {
#clock-cells = <0>;
reg = <0xe0 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>;
clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2";
clock-output-names = "cmux7";
};
};
rcpm: global-utilities@e2000 {
......
arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi
View file @ 235c7b9f
......@@ -81,6 +81,7 @@ cpus {
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
clocks = <&mux0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
......@@ -89,6 +90,7 @@ L2_0: l2-cache {
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
clocks = <&mux1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
......@@ -97,6 +99,7 @@ L2_1: l2-cache {
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
clocks = <&mux2>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
......@@ -105,6 +108,7 @@ L2_2: l2-cache {
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
clocks = <&mux3>;
next-level-cache = <&L2_3>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
......@@ -113,6 +117,7 @@ L2_3: l2-cache {
cpu4: PowerPC,e500mc@4 {
device_type = "cpu";
reg = <4>;
clocks = <&mux4>;
next-level-cache = <&L2_4>;
L2_4: l2-cache {
next-level-cache = <&cpc>;
......@@ -121,6 +126,7 @@ L2_4: l2-cache {
cpu5: PowerPC,e500mc@5 {
device_type = "cpu";
reg = <5>;
clocks = <&mux5>;
next-level-cache = <&L2_5>;
L2_5: l2-cache {
next-level-cache = <&cpc>;
......@@ -129,6 +135,7 @@ L2_5: l2-cache {
cpu6: PowerPC,e500mc@6 {
device_type = "cpu";
reg = <6>;
clocks = <&mux6>;
next-level-cache = <&L2_6>;
L2_6: l2-cache {
next-level-cache = <&cpc>;
......@@ -137,6 +144,7 @@ L2_6: l2-cache {
cpu7: PowerPC,e500mc@7 {
device_type = "cpu";
reg = <7>;
clocks = <&mux7>;
next-level-cache = <&L2_7>;
L2_7: l2-cache {
next-level-cache = <&cpc>;
......
arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
View file @ 235c7b9f
......@@ -338,8 +338,51 @@ pins: global-utilities@e0e00 {
clockgen: global-utilities@e1000 {
compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
#address-cells = <1>;
#size-cells = <1>;
sysclk: sysclk {
#clock-cells = <0>;
compatible = "fsl,qoriq-sysclk-1.0";
clock-output-names = "sysclk";
};
pll0: pll0@800 {
#clock-cells = <1>;
reg = <0x800 0x4>;
compatible = "fsl,qoriq-core-pll-1.0";
clocks = <&sysclk>;
clock-output-names = "pll0", "pll0-div2";
};
pll1: pll1@820 {
#clock-cells = <1>;
reg = <0x820 0x4>;
compatible = "fsl,qoriq-core-pll-1.0";
clocks = <&sysclk>;
clock-output-names = "pll1", "pll1-div2";
};
mux0: mux0@0 {
#clock-cells = <0>;
reg = <0x0 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux0";
};
mux1: mux1@20 {
#clock-cells = <0>;
reg = <0x20 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux1";
};
};
rcpm: global-utilities@e2000 {
......
arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
View file @ 235c7b9f
......@@ -88,6 +88,7 @@ cpus {
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
clocks = <&mux0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
......@@ -96,6 +97,7 @@ L2_0: l2-cache {
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
clocks = <&mux1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
......
arch/powerpc/boot/dts/fsl/p5040si-post.dtsi
View file @ 235c7b9f
......@@ -298,8 +298,69 @@ pins: global-utilities@e0e00 {
clockgen: global-utilities@e1000 {
compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0";
ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
#address-cells = <1>;
#size-cells = <1>;
sysclk: sysclk {
#clock-cells = <0>;
compatible = "fsl,qoriq-sysclk-1.0";
clock-output-names = "sysclk";
};
pll0: pll0@800 {
#clock-cells = <1>;
reg = <0x800 0x4>;
compatible = "fsl,qoriq-core-pll-1.0";
clocks = <&sysclk>;
clock-output-names = "pll0", "pll0-div2";
};
pll1: pll1@820 {
#clock-cells = <1>;
reg = <0x820 0x4>;
compatible = "fsl,qoriq-core-pll-1.0";
clocks = <&sysclk>;
clock-output-names = "pll1", "pll1-div2";
};
mux0: mux0@0 {
#clock-cells = <0>;
reg = <0x0 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux0";
};
mux1: mux1@20 {
#clock-cells = <0>;
reg = <0x20 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux1";
};
mux2: mux2@40 {
#clock-cells = <0>;
reg = <0x40 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux2";
};
mux3: mux3@60 {
#clock-cells = <0>;
reg = <0x60 0x4>;
compatible = "fsl,qoriq-core-mux-1.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
clock-output-names = "cmux3";
};
};
rcpm: global-utilities@e2000 {
......
arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi
View file @ 235c7b9f
......@@ -81,6 +81,7 @@ cpus {
cpu0: PowerPC,e5500@0 {
device_type = "cpu";
reg = <0>;
clocks = <&mux0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
......@@ -89,6 +90,7 @@ L2_0: l2-cache {
cpu1: PowerPC,e5500@1 {
device_type = "cpu";
reg = <1>;
clocks = <&mux1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
......@@ -97,6 +99,7 @@ L2_1: l2-cache {
cpu2: PowerPC,e5500@2 {
device_type = "cpu";
reg = <2>;
clocks = <&mux2>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
......@@ -105,6 +108,7 @@ L2_2: l2-cache {
cpu3: PowerPC,e5500@3 {
device_type = "cpu";
reg = <3>;
clocks = <&mux3>;
next-level-cache = <&L2_3>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
......
arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
View file @ 235c7b9f
......@@ -369,7 +369,93 @@ guts: global-utilities@e0000 {
clockgen: global-utilities@e1000 {
compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0";
ranges = <0x0 0xe1000 0x1000>;
reg = <0xe1000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
sysclk: sysclk {
#clock-cells = <0>;
compatible = "fsl,qoriq-sysclk-2.0";
clock-output-names = "sysclk";
};
pll0: pll0@800 {
#clock-cells = <1>;
reg = <0x800 0x4>;
compatible = "fsl,qoriq-core-pll-2.0";
clocks = <&sysclk>;
clock-output-names = "pll0", "pll0-div2", "pll0-div4";
};
pll1: pll1@820 {
#clock-cells = <1>;
reg = <0x820 0x4>;
compatible = "fsl,qoriq-core-pll-2.0";
clocks = <&sysclk>;
clock-output-names = "pll1", "pll1-div2", "pll1-div4";
};
pll2: pll2@840 {
#clock-cells = <1>;
reg = <0x840 0x4>;
compatible = "fsl,qoriq-core-pll-2.0";
clocks = <&sysclk>;
clock-output-names = "pll2", "pll2-div2", "pll2-div4";
};
pll3: pll3@860 {
#clock-cells = <1>;
reg = <0x860 0x4>;
compatible = "fsl,qoriq-core-pll-2.0";
clocks = <&sysclk>;
clock-output-names = "pll3", "pll3-div2", "pll3-div4";
};
pll4: pll4@880 {
#clock-cells = <1>;
reg = <0x880 0x4>;
compatible = "fsl,qoriq-core-pll-2.0";
clocks = <&sysclk>;
clock-output-names = "pll4", "pll4-div2", "pll4-div4";
};
mux0: mux0@0 {
#clock-cells = <0>;
reg = <0x0 0x4>;
compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
<&pll1 0>, <&pll1 1>, <&pll1 2>,
<&pll2 0>, <&pll2 1>, <&pll2 2>;
clock-names = "pll0", "pll0-div2", "pll0-div4",
"pll1", "pll1-div2", "pll1-div4",
"pll2", "pll2-div2", "pll2-div4";
clock-output-names = "cmux0";
};
mux1: mux1@20 {
#clock-cells = <0>;
reg = <0x20 0x4>;
compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>,
<&pll1 0>, <&pll1 1>, <&pll1 2>,
<&pll2 0>, <&pll2 1>, <&pll2 2>;
clock-names = "pll0", "pll0-div2", "pll0-div4",
"pll1", "pll1-div2", "pll1-div4",
"pll2", "pll2-div2", "pll2-div4";
clock-output-names = "cmux1";
};
mux2: mux2@40 {
#clock-cells = <0>;
reg = <0x40 0x4>;
compatible = "fsl,qoriq-core-mux-2.0";
clocks = <&pll3 0>, <&pll3 1>, <&pll3 2>,
<&pll4 0>, <&pll4 1>, <&pll4 2>;
clock-names = "pll3", "pll3-div2", "pll3-div4",
"pll4", "pll4-div2", "pll4-div4";
clock-output-names = "cmux2";
};
};
rcpm: global-utilities@e2000 {
......
arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi
View file @ 235c7b9f
......@@ -67,61 +67,73 @@ cpus {
cpu0: PowerPC,e6500@0 {
device_type = "cpu";
reg = <0 1>;
clocks = <&mux0>;
next-level-cache = <&L2_1>;
};
cpu1: PowerPC,e6500@2 {
device_type = "cpu";
reg = <2 3>;
clocks = <&mux0>;
next-level-cache = <&L2_1>;
};
cpu2: PowerPC,e6500@4 {
device_type = "cpu";
reg = <4 5>;
clocks = <&mux0>;
next-level-cache = <&L2_1>;
};
cpu3: PowerPC,e6500@6 {
device_type = "cpu";
reg = <6 7>;
clocks = <&mux0>;
next-level-cache = <&L2_1>;
};
cpu4: PowerPC,e6500@8 {
device_type = "cpu";
reg = <8 9>;
clocks = <&mux1>;
next-level-cache = <&L2_2>;
};
cpu5: PowerPC,e6500@10 {
device_type = "cpu";
reg = <10 11>;
clocks = <&mux1>;
next-level-cache = <&L2_2>;
};
cpu6: PowerPC,e6500@12 {
device_type = "cpu";
reg = <12 13>;
clocks = <&mux1>;
next-level-cache = <&L2_2>;
};
cpu7: PowerPC,e6500@14 {
device_type = "cpu";
reg = <14 15>;
clocks = <&mux1>;
next-level-cache = <&L2_2>;
};
cpu8: PowerPC,e6500@16 {
device_type = "cpu";
reg = <16 17>;
clocks = <&mux2>;
next-level-cache = <&L2_3>;
};
cpu9: PowerPC,e6500@18 {
device_type = "cpu";
reg = <18 19>;
clocks = <&mux2>;
next-level-cache = <&L2_3>;
};
cpu10: PowerPC,e6500@20 {
device_type = "cpu";
reg = <20 21>;
clocks = <&mux2>;
next-level-cache = <&L2_3>;
};
cpu11: PowerPC,e6500@22 {
device_type = "cpu";
reg = <22 23>;
clocks = <&mux2>;
next-level-cache = <&L2_3>;
};
};
......
arch/powerpc/boot/dts/t4240qds.dts
View file @ 235c7b9f
......@@ -159,6 +159,48 @@ rtc@68 {
interrupts = <0x1 0x1 0 0>;
};
};
i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2>;
ina220@40 {
compatible = "ti,ina220";
reg = <0x40>;
shunt-resistor = <1000>;
};
ina220@41 {
compatible = "ti,ina220";
reg = <0x41>;
shunt-resistor = <1000>;
};
ina220@44 {
compatible = "ti,ina220";
reg = <0x44>;
shunt-resistor = <1000>;
};
ina220@45 {
compatible = "ti,ina220";
reg = <0x45>;
shunt-resistor = <1000>;
};
ina220@46 {
compatible = "ti,ina220";
reg = <0x46>;
shunt-resistor = <1000>;
};
ina220@47 {
compatible = "ti,ina220";
reg = <0x47>;
shunt-resistor = <1000>;
};
};
};
};
......
arch/powerpc/configs/40x/acadia_defconfig
View file @ 235c7b9f
......@@ -30,7 +30,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/40x/ep405_defconfig
View file @ 235c7b9f
......@@ -29,7 +29,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/40x/kilauea_defconfig
View file @ 235c7b9f
......@@ -32,7 +32,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/40x/makalu_defconfig
View file @ 235c7b9f
......@@ -29,7 +29,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/40x/walnut_defconfig
View file @ 235c7b9f
......@@ -27,7 +27,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/44x/arches_defconfig
View file @ 235c7b9f
......@@ -31,7 +31,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/44x/bluestone_defconfig
View file @ 235c7b9f
......@@ -26,7 +26,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/44x/canyonlands_defconfig
View file @ 235c7b9f
......@@ -31,7 +31,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/44x/ebony_defconfig
View file @ 235c7b9f
......@@ -28,7 +28,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/44x/eiger_defconfig
View file @ 235c7b9f
......@@ -34,7 +34,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/44x/icon_defconfig
View file @ 235c7b9f
......@@ -33,7 +33,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/44x/iss476-smp_defconfig
View file @ 235c7b9f
......@@ -42,7 +42,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/44x/katmai_defconfig
View file @ 235c7b9f
......@@ -29,7 +29,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/44x/rainier_defconfig
View file @ 235c7b9f
......@@ -30,7 +30,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/44x/redwood_defconfig
View file @ 235c7b9f
......@@ -34,7 +34,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/44x/sequoia_defconfig
View file @ 235c7b9f
......@@ -31,7 +31,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/44x/taishan_defconfig
View file @ 235c7b9f
......@@ -29,7 +29,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_CFI=y
......
arch/powerpc/configs/44x/warp_defconfig
View file @ 235c7b9f
......@@ -34,7 +34,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/52xx/cm5200_defconfig
View file @ 235c7b9f
......@@ -30,7 +30,6 @@ CONFIG_SYN_COOKIES=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/52xx/motionpro_defconfig
View file @ 235c7b9f
......@@ -31,7 +31,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/52xx/pcm030_defconfig
View file @ 235c7b9f
......@@ -44,7 +44,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/52xx/tqm5200_defconfig
View file @ 235c7b9f
......@@ -35,7 +35,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/83xx/asp8347_defconfig
View file @ 235c7b9f
......@@ -32,7 +32,6 @@ CONFIG_SYN_COOKIES=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_OF_PARTS=y
......
arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
View file @ 235c7b9f
......@@ -30,7 +30,6 @@ CONFIG_SYN_COOKIES=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
View file @ 235c7b9f
......@@ -30,7 +30,6 @@ CONFIG_SYN_COOKIES=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
......
arch/powerpc/configs/83xx/mpc836x_mds_defconfig
View file @ 235c7b9f
......@@ -31,7 +31,6 @@ CONFIG_SYN_COOKIES=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
View file @ 235c7b9f
......@@ -29,7 +29,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/83xx/sbc834x_defconfig
View file @ 235c7b9f
......@@ -31,7 +31,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/85xx/ksi8560_defconfig
View file @ 235c7b9f
......@@ -28,7 +28,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
......
arch/powerpc/configs/85xx/ppa8548_defconfig
View file @ 235c7b9f
......@@ -44,7 +44,6 @@ CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_I2C=y
......
arch/powerpc/configs/85xx/socrates_defconfig
View file @ 235c7b9f
......@@ -32,7 +32,6 @@ CONFIG_CAN_RAW=y
CONFIG_CAN_BCM=y
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/85xx/tqm8540_defconfig
View file @ 235c7b9f
......@@ -26,7 +26,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/85xx/tqm8541_defconfig
View file @ 235c7b9f
......@@ -26,7 +26,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/85xx/tqm8548_defconfig
View file @ 235c7b9f
......@@ -34,7 +34,6 @@ CONFIG_SYN_COOKIES=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLKDEVS=y
......
arch/powerpc/configs/85xx/tqm8555_defconfig
View file @ 235c7b9f
......@@ -26,7 +26,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/85xx/tqm8560_defconfig
View file @ 235c7b9f
......@@ -26,7 +26,6 @@ CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
View file @ 235c7b9f
......@@ -65,7 +65,6 @@ CONFIG_ARPD=y
CONFIG_IPV6=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
......
arch/powerpc/configs/86xx/gef_ppc9a_defconfig
View file @ 235c7b9f
......@@ -70,7 +70,6 @@ CONFIG_NET_PKTGEN=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/86xx/gef_sbc310_defconfig
View file @ 235c7b9f
......@@ -70,7 +70,6 @@ CONFIG_NET_PKTGEN=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/86xx/gef_sbc610_defconfig
View file @ 235c7b9f
......@@ -123,7 +123,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
View file @ 235c7b9f
......@@ -41,7 +41,6 @@ CONFIG_IP_PNP_RARP=y
CONFIG_IPV6=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/86xx/sbc8641d_defconfig
View file @ 235c7b9f
......@@ -120,7 +120,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
......
arch/powerpc/configs/c2k_defconfig
View file @ 235c7b9f
......@@ -149,7 +149,6 @@ CONFIG_BT_HCIVHCI=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/corenet64_smp_defconfig
View file @ 235c7b9f
......@@ -26,7 +26,6 @@ CONFIG_CORENET_GENERIC=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED=y
CONFIG_FSL_IFC=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCI_MSI=y
CONFIG_RAPIDIO=y
......@@ -60,7 +59,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/linkstation_defconfig
View file @ 235c7b9f
......@@ -59,7 +59,6 @@ CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/mpc85xx_defconfig
View file @ 235c7b9f
......@@ -49,7 +49,6 @@ CONFIG_HIGHMEM=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_FSL_IFC=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_RAPIDIO=y
......@@ -82,7 +81,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/mpc85xx_smp_defconfig
View file @ 235c7b9f
......@@ -52,7 +52,6 @@ CONFIG_HIGHMEM=y
CONFIG_BINFMT_MISC=m
CONFIG_MATH_EMULATION=y
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_FSL_IFC=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_RAPIDIO=y
......@@ -85,7 +84,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/ppc40x_defconfig
View file @ 235c7b9f
......@@ -33,7 +33,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/ppc44x_defconfig
View file @ 235c7b9f
......@@ -44,7 +44,6 @@ CONFIG_BRIDGE=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_CONNECTOR=y
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
......
arch/powerpc/configs/ppc64_defconfig
View file @ 235c7b9f
......@@ -73,74 +73,8 @@ CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_BRIDGE=m
CONFIG_BPF_JIT=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
......
arch/powerpc/configs/ppc64e_defconfig
View file @ 235c7b9f
......@@ -48,74 +48,8 @@ CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_BRIDGE=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......
arch/powerpc/configs/prpmc2800_defconfig deleted 100644 → 0
View file @ bdfc7cbd
CONFIG_ALTIVEC=y
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_PMAC is not set
CONFIG_EMBEDDED6xx=y
CONFIG_PPC_PRPMC2800=y
CONFIG_HIGHMEM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BINFMT_MISC=y
CONFIG_SPARSE_IRQ=y
# CONFIG_SECCOMP is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_IPV6 is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_IDE=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SD=y
CONFIG_ATA=y
CONFIG_SATA_MV=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_E100=y
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
CONFIG_E1000=y
CONFIG_MV643XX_ETH=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_MPSC=y
CONFIG_SERIAL_MPSC_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MV64XXX=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_HID_DRAGONRISE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_INOTIFY=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_CRC_T10DIF=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
arch/powerpc/configs/pseries_defconfig
View file @ 235c7b9f
......@@ -65,57 +65,8 @@ CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_BRIDGE=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......@@ -353,3 +304,5 @@ CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
CONFIG_VIRTUALIZATION=y
CONFIG_KVM_BOOK3S_64=m
CONFIG_KVM_BOOK3S_64_HV=y
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
arch/powerpc/configs/pseries_le_defconfig
View file @ 235c7b9f
......@@ -67,57 +67,8 @@ CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
# CONFIG_NETFILTER_ADVANCED is not set
CONFIG_BRIDGE=m
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
......
arch/powerpc/configs/storcenter_defconfig
View file @ 235c7b9f
......@@ -31,7 +31,6 @@ CONFIG_IP_PNP_DHCP=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/configs/tqm8xx_defconfig
View file @ 235c7b9f
......@@ -41,7 +41,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
CONFIG_MTD_CHAR=y
......
arch/powerpc/include/asm/compat.h
View file @ 235c7b9f
......@@ -8,7 +8,11 @@
#include <linux/sched.h>
#define COMPAT_USER_HZ 100
#ifdef __BIG_ENDIAN__
#define COMPAT_UTS_MACHINE "ppc\0\0"
#else
#define COMPAT_UTS_MACHINE "ppcle\0\0"
#endif
typedef u32 compat_size_t;
typedef s32 compat_ssize_t;
......
arch/powerpc/include/asm/cputable.h
View file @ 235c7b9f
......@@ -189,6 +189,7 @@ extern const char *powerpc_base_platform;
#define CPU_FTR_HAS_PPR LONG_ASM_CONST(0x0200000000000000)
#define CPU_FTR_DAWR LONG_ASM_CONST(0x0400000000000000)
#define CPU_FTR_DABRX LONG_ASM_CONST(0x0800000000000000)
#define CPU_FTR_PMAO_BUG LONG_ASM_CONST(0x1000000000000000)
#ifndef __ASSEMBLY__
......@@ -445,6 +446,7 @@ extern const char *powerpc_base_platform;
CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \
CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP)
#define CPU_FTRS_POWER8E (CPU_FTRS_POWER8 | CPU_FTR_PMAO_BUG)
#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
......@@ -466,8 +468,8 @@ extern const char *powerpc_base_platform;
#define CPU_FTRS_POSSIBLE \
(CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \
CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 | \
CPU_FTRS_POWER7 | CPU_FTRS_POWER8 | CPU_FTRS_CELL | \
CPU_FTRS_PA6T | CPU_FTR_VSX)
CPU_FTRS_POWER7 | CPU_FTRS_POWER8E | CPU_FTRS_POWER8 | \
CPU_FTRS_CELL | CPU_FTRS_PA6T | CPU_FTR_VSX)
#endif
#else
enum {
......
arch/powerpc/include/asm/exception-64e.h
View file @ 235c7b9f
......@@ -46,9 +46,8 @@
#define EX_CR (1 * 8)
#define EX_R10 (2 * 8)
#define EX_R11 (3 * 8)
#define EX_R13 (4 * 8)
#define EX_R14 (5 * 8)
#define EX_R15 (6 * 8)
#define EX_R14 (4 * 8)
#define EX_R15 (5 * 8)
/*
* The TLB miss exception uses different slots.
......@@ -173,16 +172,6 @@ exc_##label##_book3e:
ld r9,EX_TLB_R9(r12); \
ld r8,EX_TLB_R8(r12); \
mtlr r16;
#define TLB_MISS_PROLOG_STATS_BOLTED \
mflr r10; \
std r8,PACA_EXTLB+EX_TLB_R8(r13); \
std r9,PACA_EXTLB+EX_TLB_R9(r13); \
std r10,PACA_EXTLB+EX_TLB_LR(r13);
#define TLB_MISS_RESTORE_STATS_BOLTED \
ld r16,PACA_EXTLB+EX_TLB_LR(r13); \
ld r9,PACA_EXTLB+EX_TLB_R9(r13); \
ld r8,PACA_EXTLB+EX_TLB_R8(r13); \
mtlr r16;
#define TLB_MISS_STATS_D(name) \
addi r9,r13,MMSTAT_DSTATS+name; \
bl .tlb_stat_inc;
......
arch/powerpc/include/asm/exception-64s.h
View file @ 235c7b9f
......@@ -146,6 +146,14 @@ BEGIN_FTR_SECTION_NESTED(943) \
mfspr ra,spr; \
END_FTR_SECTION_NESTED(ftr,ftr,943)
/*
* Set an SPR from a register if the CPU has the given feature
*/
#define OPT_SET_SPR(ra, spr, ftr) \
BEGIN_FTR_SECTION_NESTED(943) \
mtspr spr,ra; \
END_FTR_SECTION_NESTED(ftr,ftr,943)
/*
* Save a register to the PACA if the CPU has the given feature
*/
......
arch/powerpc/include/asm/hvcall.h
View file @ 235c7b9f
......@@ -274,6 +274,11 @@
/* Platform specific hcalls, used by KVM */
#define H_RTAS 0xf000
/* "Platform specific hcalls", provided by PHYP */
#define H_GET_24X7_CATALOG_PAGE 0xF078
#define H_GET_24X7_DATA 0xF07C
#define H_GET_PERF_COUNTER_INFO 0xF080
#ifndef __ASSEMBLY__
/**
......
arch/powerpc/include/asm/kvm_booke_hv_asm.h
View file @ 235c7b9f
......@@ -36,26 +36,21 @@
* *(r8 + GPR11) = saved r11
*
* 64-bit host
* Expected inputs (GEN/GDBELL/DBG/MC exception types):
* Expected inputs (GEN/GDBELL/DBG/CRIT/MC exception types):
* r10 = saved CR
* r13 = PACA_POINTER
* *(r13 + PACA_EX##type + EX_R10) = saved r10
* *(r13 + PACA_EX##type + EX_R11) = saved r11
* SPRN_SPRG_##type##_SCRATCH = saved r13
*
* Expected inputs (CRIT exception type):
* r10 = saved CR
* r13 = PACA_POINTER
* *(r13 + PACA_EX##type + EX_R10) = saved r10
* *(r13 + PACA_EX##type + EX_R11) = saved r11
* *(r13 + PACA_EX##type + EX_R13) = saved r13
*
* Expected inputs (TLB exception type):
* r10 = saved CR
* r12 = extlb pointer
* r13 = PACA_POINTER
* *(r13 + PACA_EX##type + EX_TLB_R10) = saved r10
* *(r13 + PACA_EX##type + EX_TLB_R11) = saved r11
* SPRN_SPRG_GEN_SCRATCH = saved r13
* *(r12 + EX_TLB_R10) = saved r10
* *(r12 + EX_TLB_R11) = saved r11
* *(r12 + EX_TLB_R13) = saved r13
* SPRN_SPRG_GEN_SCRATCH = saved r12
*
* Only the bolted version of TLB miss exception handlers is supported now.
*/
......
arch/powerpc/include/asm/machdep.h
View file @ 235c7b9f
......@@ -170,6 +170,9 @@ struct machdep_calls {
int (*system_reset_exception)(struct pt_regs *regs);
int (*machine_check_exception)(struct pt_regs *regs);
/* Called during machine check exception to retrive fixup address. */
bool (*mce_check_early_recovery)(struct pt_regs *regs);
/* Motherboard/chipset features. This is a kind of general purpose
* hook used to control some machine specific features (like reset
* lines, chip power control, etc...).
......@@ -279,6 +282,10 @@ struct machdep_calls {
#ifdef CONFIG_ARCH_RANDOM
int (*get_random_long)(unsigned long *v);
#endif
#ifdef CONFIG_MEMORY_HOTREMOVE
int (*remove_memory)(u64, u64);
#endif
};
extern void e500_idle(void);
......
arch/powerpc/include/asm/mce.h
View file @ 235c7b9f
......@@ -187,7 +187,8 @@ struct mce_error_info {
#define MCE_EVENT_DONTRELEASE false
extern void save_mce_event(struct pt_regs *regs, long handled,
struct mce_error_info *mce_err, uint64_t addr);
struct mce_error_info *mce_err, uint64_t nip,
uint64_t addr);
extern int get_mce_event(struct machine_check_event *mce, bool release);
extern void release_mce_event(void);
extern void machine_check_queue_event(void);
......
arch/powerpc/include/asm/mmu-book3e.h
View file @ 235c7b9f
......@@ -287,11 +287,14 @@ extern int mmu_linear_psize;
extern int mmu_vmemmap_psize;
struct tlb_core_data {
/*
* Per-core spinlock for e6500 TLB handlers (no tlbsrx.)
* Must be the first struct element.
*/
u8 lock;
/* For software way selection, as on Freescale TLB1 */
u8 esel_next, esel_max, esel_first;
/* Per-core spinlock for e6500 TLB handlers (no tlbsrx.) */
u8 lock;
};
#ifdef CONFIG_PPC64
......
arch/powerpc/include/asm/opal.h
View file @ 235c7b9f
......@@ -83,6 +83,8 @@ extern int opal_enter_rtas(struct rtas_args *args,
#define OPAL_INTERNAL_ERROR -11
#define OPAL_BUSY_EVENT -12
#define OPAL_HARDWARE_FROZEN -13
#define OPAL_WRONG_STATE -14
#define OPAL_ASYNC_COMPLETION -15
/* API Tokens (in r0) */
#define OPAL_CONSOLE_WRITE 1
......@@ -151,12 +153,26 @@ extern int opal_enter_rtas(struct rtas_args *args,
#define OPAL_LPC_READ 67
#define OPAL_LPC_WRITE 68
#define OPAL_RETURN_CPU 69
#define OPAL_ELOG_READ 71
#define OPAL_ELOG_WRITE 72
#define OPAL_ELOG_ACK 73
#define OPAL_ELOG_RESEND 74
#define OPAL_ELOG_SIZE 75
#define OPAL_FLASH_VALIDATE 76
#define OPAL_FLASH_MANAGE 77
#define OPAL_FLASH_UPDATE 78
#define OPAL_DUMP_INIT 81
#define OPAL_DUMP_INFO 82
#define OPAL_DUMP_READ 83
#define OPAL_DUMP_ACK 84
#define OPAL_GET_MSG 85
#define OPAL_CHECK_ASYNC_COMPLETION 86
#define OPAL_SYNC_HOST_REBOOT 87
#define OPAL_SENSOR_READ 88
#define OPAL_GET_PARAM 89
#define OPAL_SET_PARAM 90
#define OPAL_DUMP_RESEND 91
#define OPAL_DUMP_INFO2 94
#ifndef __ASSEMBLY__
......@@ -237,11 +253,14 @@ enum OpalPendingState {
OPAL_EVENT_EPOW = 0x80,
OPAL_EVENT_LED_STATUS = 0x100,
OPAL_EVENT_PCI_ERROR = 0x200,
OPAL_EVENT_DUMP_AVAIL = 0x400,
OPAL_EVENT_MSG_PENDING = 0x800,
};
enum OpalMessageType {
OPAL_MSG_ASYNC_COMP = 0,
OPAL_MSG_ASYNC_COMP = 0, /* params[0] = token, params[1] = rc,
* additional params function-specific
*/
OPAL_MSG_MEM_ERR,
OPAL_MSG_EPOW,
OPAL_MSG_SHUTDOWN,
......@@ -394,6 +413,13 @@ enum OpalLPCAddressType {
OPAL_LPC_FW = 2,
};
/* System parameter permission */
enum OpalSysparamPerm {
OPAL_SYSPARAM_READ = 0x1,
OPAL_SYSPARAM_WRITE = 0x2,
OPAL_SYSPARAM_RW = (OPAL_SYSPARAM_READ | OPAL_SYSPARAM_WRITE),
};
struct opal_msg {
uint32_t msg_type;
uint32_t reserved;
......@@ -823,16 +849,37 @@ int64_t opal_lpc_write(uint32_t chip_id, enum OpalLPCAddressType addr_type,
uint32_t addr, uint32_t data, uint32_t sz);
int64_t opal_lpc_read(uint32_t chip_id, enum OpalLPCAddressType addr_type,
uint32_t addr, __be32 *data, uint32_t sz);
int64_t opal_read_elog(uint64_t buffer, size_t size, uint64_t log_id);
int64_t opal_get_elog_size(uint64_t *log_id, size_t *size, uint64_t *elog_type);
int64_t opal_write_elog(uint64_t buffer, uint64_t size, uint64_t offset);
int64_t opal_send_ack_elog(uint64_t log_id);
void opal_resend_pending_logs(void);
int64_t opal_validate_flash(uint64_t buffer, uint32_t *size, uint32_t *result);
int64_t opal_manage_flash(uint8_t op);
int64_t opal_update_flash(uint64_t blk_list);
int64_t opal_dump_init(uint8_t dump_type);
int64_t opal_dump_info(uint32_t *dump_id, uint32_t *dump_size);
int64_t opal_dump_info2(uint32_t *dump_id, uint32_t *dump_size, uint32_t *dump_type);
int64_t opal_dump_read(uint32_t dump_id, uint64_t buffer);
int64_t opal_dump_ack(uint32_t dump_id);
int64_t opal_dump_resend_notification(void);
int64_t opal_get_msg(uint64_t buffer, size_t size);
int64_t opal_check_completion(uint64_t buffer, size_t size, uint64_t token);
int64_t opal_sync_host_reboot(void);
int64_t opal_get_param(uint64_t token, uint32_t param_id, uint64_t buffer,
size_t length);
int64_t opal_set_param(uint64_t token, uint32_t param_id, uint64_t buffer,
size_t length);
int64_t opal_sensor_read(uint32_t sensor_hndl, int token,
uint32_t *sensor_data);
/* Internal functions */
extern int early_init_dt_scan_opal(unsigned long node, const char *uname, int depth, void *data);
extern int early_init_dt_scan_recoverable_ranges(unsigned long node,
const char *uname, int depth, void *data);
extern int opal_get_chars(uint32_t vtermno, char *buf, int count);
extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len);
......@@ -853,6 +900,13 @@ extern void opal_notifier_update_evt(uint64_t evt_mask, uint64_t evt_val);
extern int opal_get_chars(uint32_t vtermno, char *buf, int count);
extern int opal_put_chars(uint32_t vtermno, const char *buf, int total_len);
extern int __opal_async_get_token(void);
extern int opal_async_get_token_interruptible(void);
extern int __opal_async_release_token(int token);
extern int opal_async_release_token(int token);
extern int opal_async_wait_response(uint64_t token, struct opal_msg *msg);
extern int opal_get_sensor_data(u32 sensor_hndl, u32 *sensor_data);
extern void hvc_opal_init_early(void);
struct rtc_time;
......@@ -861,8 +915,12 @@ extern void opal_get_rtc_time(struct rtc_time *tm);
extern unsigned long opal_get_boot_time(void);
extern void opal_nvram_init(void);
extern void opal_flash_init(void);
extern int opal_elog_init(void);
extern void opal_platform_dump_init(void);
extern void opal_sys_param_init(void);
extern int opal_machine_check(struct pt_regs *regs);
extern bool opal_mce_check_early_recovery(struct pt_regs *regs);
extern void opal_shutdown(void);
......
arch/powerpc/include/asm/paca.h
View file @ 235c7b9f
......@@ -116,8 +116,11 @@ struct paca_struct {
/* Shared by all threads of a core -- points to tcd of first thread */
struct tlb_core_data *tcd_ptr;
/* We can have up to 3 levels of reentrancy in the TLB miss handler */
u64 extlb[3][EX_TLB_SIZE / sizeof(u64)];
/*
* We can have up to 3 levels of reentrancy in the TLB miss handler,
* in each of four exception levels (normal, crit, mcheck, debug).
*/
u64 extlb[12][EX_TLB_SIZE / sizeof(u64)];
u64 exmc[8]; /* used for machine checks */
u64 excrit[8]; /* used for crit interrupts */
u64 exdbg[8]; /* used for debug interrupts */
......@@ -146,7 +149,7 @@ struct paca_struct {
u8 io_sync; /* writel() needs spin_unlock sync */
u8 irq_work_pending; /* IRQ_WORK interrupt while soft-disable */
u8 nap_state_lost; /* NV GPR values lost in power7_idle */
u64 sprg3; /* Saved user-visible sprg */
u64 sprg_vdso; /* Saved user-visible sprg */
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
u64 tm_scratch; /* TM scratch area for reclaim */
#endif
......
arch/powerpc/include/asm/perf_event_server.h
View file @ 235c7b9f
......@@ -14,6 +14,7 @@
#include <linux/device.h>
#include <uapi/asm/perf_event.h>
/* Update perf_event_print_debug() if this changes */
#define MAX_HWEVENTS 8
#define MAX_EVENT_ALTERNATIVES 8
#define MAX_LIMITED_HWCOUNTERS 2
......
arch/powerpc/include/asm/reg.h
View file @ 235c7b9f
......@@ -577,9 +577,13 @@
#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */
#define SPRN_USPRG3 0x103 /* SPRG3 userspace read */
#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */
#define SPRN_USPRG4 0x104 /* SPRG4 userspace read */
#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */
#define SPRN_USPRG5 0x105 /* SPRG5 userspace read */
#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */
#define SPRN_USPRG6 0x106 /* SPRG6 userspace read */
#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */
#define SPRN_USPRG7 0x107 /* SPRG7 userspace read */
#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
#define SRR1_ISI_NOPT 0x40000000 /* ISI: Not found in hash */
......@@ -664,12 +668,14 @@
#define MMCR0_PMXE 0x04000000UL /* performance monitor exception enable */
#define MMCR0_FCECE 0x02000000UL /* freeze ctrs on enabled cond or event */
#define MMCR0_TBEE 0x00400000UL /* time base exception enable */
#define MMCR0_BHRBA 0x00200000UL /* BHRB Access allowed in userspace */
#define MMCR0_EBE 0x00100000UL /* Event based branch enable */
#define MMCR0_PMCC 0x000c0000UL /* PMC control */
#define MMCR0_PMCC_U6 0x00080000UL /* PMC1-6 are R/W by user (PR) */
#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/
#define MMCR0_PMCjCE 0x00004000UL /* PMCj count enable*/
#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */
#define MMCR0_PMAO_SYNC 0x00000800UL /* PMU interrupt is synchronous */
#define MMCR0_PMAO 0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */
#define MMCR0_SHRFC 0x00000040UL /* SHRre freeze conditions between threads */
#define MMCR0_FC56 0x00000010UL /* freeze counters 5 and 6 */
......@@ -703,6 +709,7 @@
#define SPRN_EBBHR 804 /* Event based branch handler register */
#define SPRN_EBBRR 805 /* Event based branch return register */
#define SPRN_BESCR 806 /* Branch event status and control register */
#define BESCR_GE 0x8000000000000000ULL /* Global Enable */
#define SPRN_WORT 895 /* Workload optimization register - thread */
#define SPRN_PMC1 787
......@@ -879,11 +886,10 @@
* 64-bit embedded
* - SPRG0 generic exception scratch
* - SPRG2 TLB exception stack
* - SPRG3 critical exception scratch and
* CPU and NUMA node for VDSO getcpu (user visible)
* - SPRG3 critical exception scratch (user visible, sorry!)
* - SPRG4 unused (user visible)
* - SPRG6 TLB miss scratch (user visible, sorry !)
* - SPRG7 critical exception scratch
* - SPRG7 CPU and NUMA node for VDSO getcpu (user visible)
* - SPRG8 machine check exception scratch
* - SPRG9 debug exception scratch
*
......@@ -940,6 +946,8 @@
#define SPRN_SPRG_SCRATCH0 SPRN_SPRG2
#define SPRN_SPRG_HPACA SPRN_HSPRG0
#define SPRN_SPRG_HSCRATCH0 SPRN_HSPRG1
#define SPRN_SPRG_VDSO_READ SPRN_USPRG3
#define SPRN_SPRG_VDSO_WRITE SPRN_SPRG3
#define GET_PACA(rX) \
BEGIN_FTR_SECTION_NESTED(66); \
......@@ -983,6 +991,8 @@
#define SPRN_SPRG_TLB_SCRATCH SPRN_SPRG6
#define SPRN_SPRG_GEN_SCRATCH SPRN_SPRG0
#define SPRN_SPRG_GDBELL_SCRATCH SPRN_SPRG_GEN_SCRATCH
#define SPRN_SPRG_VDSO_READ SPRN_USPRG7
#define SPRN_SPRG_VDSO_WRITE SPRN_SPRG7
#define SET_PACA(rX) mtspr SPRN_SPRG_PACA,rX
#define GET_PACA(rX) mfspr rX,SPRN_SPRG_PACA
......@@ -1102,6 +1112,8 @@
#define PVR_8560 0x80200000
#define PVR_VER_E500V1 0x8020
#define PVR_VER_E500V2 0x8021
#define PVR_VER_E500MC 0x8023
#define PVR_VER_E5500 0x8024
#define PVR_VER_E6500 0x8040
/*
......
arch/powerpc/include/asm/rtas.h
View file @ 235c7b9f
......@@ -283,6 +283,7 @@ extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
#ifdef CONFIG_PPC_PSERIES
extern int pseries_devicetree_update(s32 scope);
extern void post_mobility_fixup(void);
#endif
#ifdef CONFIG_PPC_RTAS_DAEMON
......
arch/powerpc/kernel/asm-offsets.c
View file @ 235c7b9f
......@@ -253,7 +253,7 @@ int main(void)
DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
DEFINE(PACA_NAPSTATELOST, offsetof(struct paca_struct, nap_state_lost));
DEFINE(PACA_SPRG3, offsetof(struct paca_struct, sprg3));
DEFINE(PACA_SPRG_VDSO, offsetof(struct paca_struct, sprg_vdso));
#endif /* CONFIG_PPC64 */
/* RTAS */
......
arch/powerpc/kernel/cacheinfo.c
View file @ 235c7b9f
......@@ -756,7 +756,10 @@ void cacheinfo_cpu_online(unsigned int cpu_id)
cacheinfo_sysfs_populate(cpu_id, cache);
}
#ifdef CONFIG_HOTPLUG_CPU /* functions needed for cpu offline */
/* functions needed to remove cache entry for cpu offline or suspend/resume */
#if (defined(CONFIG_PPC_PSERIES) && defined(CONFIG_SUSPEND)) || \
defined(CONFIG_HOTPLUG_CPU)
static struct cache *cache_lookup_by_cpu(unsigned int cpu_id)
{
......@@ -843,4 +846,4 @@ void cacheinfo_cpu_offline(unsigned int cpu_id)
if (cache)
cache_cpu_clear(cache, cpu_id);
}
#endif /* CONFIG_HOTPLUG_CPU */
#endif /* (CONFIG_PPC_PSERIES && CONFIG_SUSPEND) || CONFIG_HOTPLUG_CPU */
arch/powerpc/kernel/cputable.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kernel/exceptions-64e.S
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kernel/exceptions-64s.S
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kernel/mce.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kernel/mce_power.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kernel/prom.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kernel/rtas.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kernel/setup_64.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kernel/traps.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kernel/vdso.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kernel/vdso32/getcpu.S
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kernel/vdso64/getcpu.S
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kernel/vio.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kvm/book3s_hv_rmhandlers.S
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kvm/book3s_interrupts.S
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/kvm/bookehv_interrupts.S
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/lib/memcpy_64.S
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/mm/mem.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/mm/pgtable_64.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/mm/tlb_low_64e.S
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/mm/tlb_nohash.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/perf/Makefile
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/perf/core-book3s.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/perf/hv-24x7-catalog.h 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/perf/hv-24x7.c 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/perf/hv-24x7.h 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/perf/hv-common.c 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/perf/hv-common.h 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/perf/hv-gpci.c 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/perf/hv-gpci.h 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/perf/power7-events-list.h
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/perf/power8-pmu.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/c293pcie.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/common.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/ge_imp3a.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/mpc8536_ds.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/mpc85xx.h
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/mpc85xx_cds.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/mpc85xx_ds.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/mpc85xx_mds.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/mpc85xx_rdb.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/p1010rdb.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/p1022_ds.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/p1022_rdk.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/p1023_rds.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/qemu_e500.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/sbc8548.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/twr_p102x.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/85xx/xes_mpc85xx.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/embedded6xx/Kconfig
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/embedded6xx/Makefile
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/embedded6xx/prpmc2800.c deleted 100644 → 0
View file @ bdfc7cbd
This diff is collapsed.
arch/powerpc/platforms/powernv/Makefile
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/powernv/opal-async.c 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/powernv/opal-dump.c 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/powernv/opal-elog.c 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/powernv/opal-sensor.c 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/powernv/opal-sysparam.c 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/powernv/opal.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/powernv/setup.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/pseries/Kconfig
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/pseries/mobility.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/platforms/pseries/suspend.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/sysdev/fsl_pci.c
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/sysdev/fsl_pci.h
View file @ 235c7b9f
This diff is collapsed.
arch/powerpc/xmon/xmon.c
View file @ 235c7b9f
This diff is collapsed.
drivers/hwmon/Kconfig
View file @ 235c7b9f
This diff is collapsed.
drivers/hwmon/Makefile
View file @ 235c7b9f
This diff is collapsed.
drivers/hwmon/ibmpowernv.c 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
drivers/macintosh/adb.c
View file @ 235c7b9f
This diff is collapsed.
drivers/watchdog/booke_wdt.c
View file @ 235c7b9f
This diff is collapsed.
tools/testing/selftests/powerpc/Makefile
View file @ 235c7b9f
This diff is collapsed.
tools/testing/selftests/powerpc/copyloops/Makefile 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
tools/testing/selftests/powerpc/copyloops/asm/ppc_asm.h 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
tools/testing/selftests/powerpc/copyloops/copyuser_64.S 0 → 120000
View file @ 235c7b9f
This diff is collapsed.
tools/testing/selftests/powerpc/copyloops/copyuser_power7.S 0 → 120000
View file @ 235c7b9f
This diff is collapsed.
tools/testing/selftests/powerpc/copyloops/memcpy_64.S 0 → 120000
View file @ 235c7b9f
This diff is collapsed.
tools/testing/selftests/powerpc/copyloops/memcpy_power7.S 0 → 120000
View file @ 235c7b9f
This diff is collapsed.
tools/testing/selftests/powerpc/copyloops/validate.c 0 → 100644
View file @ 235c7b9f
This diff is collapsed.
tools/testing/selftests/powerpc/utils.h
View file @ 235c7b9f
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7