Merge tag 'ux500-dma40-for-arm-soc-2' of...

Merge tag 'ux500-dma40-for-arm-soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers

From Linus Walleij:
Second set of DMA40 changes: refactorings and device tree
support for the DMA40. Now with MUSB and some platform
data removal.

* tag 'ux500-dma40-for-arm-soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  dmaengine: ste_dma40: Fetch disabled channels from DT
  dmaengine: ste_dma40: Fetch the number of physical channels from DT
  ARM: ux500: Stop passing DMA platform data though AUXDATA
  dmaengine: ste_dma40: Allow memcpy channels to be configured from DT
  dmaengine: ste_dma40_ll: Replace meaningless register set with comment
  dmaengine: ste_dma40: Convert data_width from register bit format to value
  dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'s
  ARM: ux500: Remove recently unused stedma40_xfer_dir enums
  dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones
  ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one
  dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s
  ARM: ux500: Remove empty function u8500_of_init_devices()
  ARM: ux500: Remove ux500-musb platform registation when booting with DT
  usb: musb: ux500: add device tree probing support
  usb: musb: ux500: attempt to find channels by name before using pdata
  usb: musb: ux500: harden checks for platform data
  usb: musb: ux500: take the dma_mask from coherent_dma_mask
  usb: musb: ux500: move the MUSB HDRC configuration into the driver
  usb: musb: ux500: move channel number knowledge into the driver

Documentation/devicetree/bindings/dma/ste-dma40.txt

@@ -6,10 +6,12 @@ Required properties:
 - reg-names: Names of the above areas to use during resource look-up
 - interrupt: Should contain the DMAC interrupt number
 - #dma-cells: must be <3>
+- memcpy-channels: Channels to be used for memcpy
 
 Optional properties:
 - dma-channels: Number of channels supported by hardware - if not present
 		the driver will attempt to obtain the information from H/W
+- disabled-channels: Channels which can not be used
 
 Example:
 
@@ -21,6 +23,8 @@ Example:
 		interrupts = <0 25 0x4>;
 
 		#dma-cells = <2>;
+		memcpy-channels  = <56 57 58 59 60>;
+		disabled-channels  = <12>;
 		dma-channels = <8>;
 	};
 

Documentation/devicetree/bindings/usb/ux500-usb.txt

+Ux500 MUSB
+
+Required properties:
+ - compatible : Should be "stericsson,db8500-musb"
+ - reg        : Offset and length of registers
+ - interrupts : Interrupt; mode, number and trigger
+ - dr_mode    : Dual-role; either host mode "host", peripheral mode "peripheral"
+                or both "otg"
+
+Optional properties:
+ - dmas       : A list of dma channels;
+                dma-controller, event-line, fixed-channel, flags
+ - dma-names  : An ordered list of channel names affiliated to the above
+
+Example:
+
+usb_per5@a03e0000 {
+	compatible = "stericsson,db8500-musb", "mentor,musb";
+	reg = <0xa03e0000 0x10000>;
+	interrupts = <0 23 0x4>;
+	interrupt-names = "mc";
+
+	dr_mode = "otg";
+
+	dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+	       <&dma 38 0 0x0>, /* Logical - MemToDev */
+	       <&dma 37 0 0x2>, /* Logical - DevToMem */
+	       <&dma 37 0 0x0>, /* Logical - MemToDev */
+	       <&dma 36 0 0x2>, /* Logical - DevToMem */
+	       <&dma 36 0 0x0>, /* Logical - MemToDev */
+	       <&dma 19 0 0x2>, /* Logical - DevToMem */
+	       <&dma 19 0 0x0>, /* Logical - MemToDev */
+	       <&dma 18 0 0x2>, /* Logical - DevToMem */
+	       <&dma 18 0 0x0>, /* Logical - MemToDev */
+	       <&dma 17 0 0x2>, /* Logical - DevToMem */
+	       <&dma 17 0 0x0>, /* Logical - MemToDev */
+	       <&dma 16 0 0x2>, /* Logical - DevToMem */
+	       <&dma 16 0 0x0>, /* Logical - MemToDev */
+	       <&dma 39 0 0x2>, /* Logical - DevToMem */
+	       <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+	dma-names = "iep_1_9",  "oep_1_9",
+		    "iep_2_10", "oep_2_10",
+		    "iep_3_11", "oep_3_11",
+		    "iep_4_12", "oep_4_12",
+		    "iep_5_13", "oep_5_13",
+		    "iep_6_14", "oep_6_14",
+		    "iep_7_15", "oep_7_15",
+		    "iep_8",    "oep_8";
+};

arch/arm/mach-ux500/board-mop500-audio.c

@@ -21,13 +21,13 @@
 
 static struct stedma40_chan_cfg msp0_dma_rx = {
 	.high_priority = true,
-	.dir = STEDMA40_PERIPH_TO_MEM,
+	.dir = DMA_DEV_TO_MEM,
 	.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
 };
 
 static struct stedma40_chan_cfg msp0_dma_tx = {
 	.high_priority = true,
-	.dir = STEDMA40_MEM_TO_PERIPH,
+	.dir = DMA_MEM_TO_DEV,
 	.dev_type = DB8500_DMA_DEV31_MSP0_SLIM0_CH0,
 };
 
@@ -39,13 +39,13 @@ struct msp_i2s_platform_data msp0_platform_data = {
 
 static struct stedma40_chan_cfg msp1_dma_rx = {
 	.high_priority = true,
-	.dir = STEDMA40_PERIPH_TO_MEM,
+	.dir = DMA_DEV_TO_MEM,
 	.dev_type = DB8500_DMA_DEV30_MSP3,
 };
 
 static struct stedma40_chan_cfg msp1_dma_tx = {
 	.high_priority = true,
-	.dir = STEDMA40_MEM_TO_PERIPH,
+	.dir = DMA_MEM_TO_DEV,
 	.dev_type = DB8500_DMA_DEV30_MSP1,
 };
 
@@ -57,13 +57,13 @@ struct msp_i2s_platform_data msp1_platform_data = {
 
 static struct stedma40_chan_cfg msp2_dma_rx = {
 	.high_priority = true,
-	.dir = STEDMA40_PERIPH_TO_MEM,
+	.dir = DMA_DEV_TO_MEM,
 	.dev_type = DB8500_DMA_DEV14_MSP2,
 };
 
 static struct stedma40_chan_cfg msp2_dma_tx = {
 	.high_priority = true,
-	.dir = STEDMA40_MEM_TO_PERIPH,
+	.dir = DMA_MEM_TO_DEV,
 	.dev_type = DB8500_DMA_DEV14_MSP2,
 	.use_fixed_channel = true,
 	.phy_channel = 1,

arch/arm/mach-ux500/board-mop500-sdi.c

@@ -34,13 +34,13 @@
 #ifdef CONFIG_STE_DMA40
 struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
+	.dir = DMA_DEV_TO_MEM,
 	.dev_type = DB8500_DMA_DEV29_SD_MM0,
 };
 
 static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
+	.dir = DMA_MEM_TO_DEV,
 	.dev_type = DB8500_DMA_DEV29_SD_MM0,
 };
 #endif
@@ -81,13 +81,13 @@ void mop500_sdi_tc35892_init(struct device *parent)
 #ifdef CONFIG_STE_DMA40
 static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
+	.dir = DMA_DEV_TO_MEM,
 	.dev_type = DB8500_DMA_DEV32_SD_MM1,
 };
 
 static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
+	.dir = DMA_MEM_TO_DEV,
 	.dev_type = DB8500_DMA_DEV32_SD_MM1,
 };
 #endif
@@ -112,13 +112,13 @@ struct mmci_platform_data mop500_sdi1_data = {
 #ifdef CONFIG_STE_DMA40
 struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
+	.dir = DMA_DEV_TO_MEM,
 	.dev_type =  DB8500_DMA_DEV28_SD_MM2,
 };
 
 static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
+	.dir = DMA_MEM_TO_DEV,
 	.dev_type = DB8500_DMA_DEV28_SD_MM2,
 };
 #endif
@@ -144,13 +144,13 @@ struct mmci_platform_data mop500_sdi2_data = {
 #ifdef CONFIG_STE_DMA40
 struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
+	.dir = DMA_DEV_TO_MEM,
 	.dev_type =  DB8500_DMA_DEV42_SD_MM4,
 };
 
 static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
+	.dir = DMA_MEM_TO_DEV,
 	.dev_type = DB8500_DMA_DEV42_SD_MM4,
 };
 #endif

arch/arm/mach-ux500/board-mop500.c

@@ -424,19 +424,19 @@ void mop500_snowball_ethernet_clock_enable(void)
 
 static struct cryp_platform_data u8500_cryp1_platform_data = {
 		.mem_to_engine = {
-				.dir = STEDMA40_MEM_TO_PERIPH,
+				.dir = DMA_MEM_TO_DEV,
 				.dev_type = DB8500_DMA_DEV48_CAC1,
 				.mode = STEDMA40_MODE_LOGICAL,
 		},
 		.engine_to_mem = {
-				.dir = STEDMA40_PERIPH_TO_MEM,
+				.dir = DMA_DEV_TO_MEM,
 				.dev_type = DB8500_DMA_DEV48_CAC1,
 				.mode = STEDMA40_MODE_LOGICAL,
 		}
 };
 
 static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = {
-		.dir = STEDMA40_MEM_TO_PERIPH,
+		.dir = DMA_MEM_TO_DEV,
 		.dev_type = DB8500_DMA_DEV50_HAC1_TX,
 		.mode = STEDMA40_MODE_LOGICAL,
 };
@@ -455,13 +455,13 @@ static struct platform_device *mop500_platform_devs[] __initdata = {
 #ifdef CONFIG_STE_DMA40
 static struct stedma40_chan_cfg ssp0_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
+	.dir = DMA_DEV_TO_MEM,
 	.dev_type = DB8500_DMA_DEV8_SSP0,
 };
 
 static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
+	.dir = DMA_MEM_TO_DEV,
 	.dev_type = DB8500_DMA_DEV8_SSP0,
 };
 #endif
@@ -490,37 +490,37 @@ static void __init mop500_spi_init(struct device *parent)
 #ifdef CONFIG_STE_DMA40
 static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
+	.dir = DMA_DEV_TO_MEM,
 	.dev_type = DB8500_DMA_DEV13_UART0,
 };
 
 static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
+	.dir = DMA_MEM_TO_DEV,
 	.dev_type = DB8500_DMA_DEV13_UART0,
 };
 
 static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
+	.dir = DMA_DEV_TO_MEM,
 	.dev_type = DB8500_DMA_DEV12_UART1,
 };
 
 static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
+	.dir = DMA_MEM_TO_DEV,
 	.dev_type = DB8500_DMA_DEV12_UART1,
 };
 
 static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_PERIPH_TO_MEM,
+	.dir = DMA_DEV_TO_MEM,
 	.dev_type = DB8500_DMA_DEV11_UART2,
 };
 
 static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = STEDMA40_MEM_TO_PERIPH,
+	.dir = DMA_MEM_TO_DEV,
 	.dev_type = DB8500_DMA_DEV11_UART2,
 };
 #endif

arch/arm/mach-ux500/cpu-db8500.c

@@ -215,17 +215,6 @@ struct device * __init u8500_init_devices(void)
 }
 
 #ifdef CONFIG_MACH_UX500_DT
-
-/* TODO: Once all pieces are DT:ed, remove completely. */
-static struct device * __init u8500_of_init_devices(void)
-{
-	struct device *parent = db8500_soc_device_init();
-
-	db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg);
-
-	return parent;
-}
-
 static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
@@ -269,8 +258,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
 		"ux500-msp-i2s.3", &msp3_platform_data),
 	/* Requires clock name bindings and channel address lookup table. */
-	OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000,
-		       "dma40.0", &dma40_plat_data),
+	OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, "dma40.0", NULL),
 	{},
 };
 
@@ -284,7 +272,7 @@ static const struct of_device_id u8500_local_bus_nodes[] = {
 
 static void __init u8500_init_machine(void)
 {
-	struct device *parent = NULL;
+	struct device *parent = db8500_soc_device_init();
 
 	/* Pinmaps must be in place before devices register */
 	if (of_machine_is_compatible("st-ericsson,mop500"))
@@ -297,9 +285,6 @@ static void __init u8500_init_machine(void)
 	else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
 		/* TODO: Add pinmaps for ccu9540 board. */
 
-	/* TODO: Export SoC, USB, cpu-freq and DMA40 */
-	parent = u8500_of_init_devices();
-
 	/* automatically probe child nodes of db8500 device */
 	of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
 }

arch/arm/mach-ux500/usb.c

@@ -14,15 +14,15 @@
 
 #define MUSB_DMA40_RX_CH { \
 		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = STEDMA40_PERIPH_TO_MEM, \
+		.dir = DMA_DEV_TO_MEM, \
 	}
 
 #define MUSB_DMA40_TX_CH { \
 		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = STEDMA40_MEM_TO_PERIPH, \
+		.dir = DMA_MEM_TO_DEV, \
 	}
 
-static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
+static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
 	= {
 	MUSB_DMA40_RX_CH,
 	MUSB_DMA40_RX_CH,
@@ -34,7 +34,7 @@ static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
 	MUSB_DMA40_RX_CH
 };
 
-static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
+static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
 	= {
 	MUSB_DMA40_TX_CH,
 	MUSB_DMA40_TX_CH,
@@ -46,7 +46,7 @@ static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_TX_CHANNELS]
 	MUSB_DMA40_TX_CH,
 };
 
-static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
+static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
 	&musb_dma_rx_ch[0],
 	&musb_dma_rx_ch[1],
 	&musb_dma_rx_ch[2],
@@ -57,7 +57,7 @@ static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_CHANNELS] = {
 	&musb_dma_rx_ch[7]
 };
 
-static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
+static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
 	&musb_dma_tx_ch[0],
 	&musb_dma_tx_ch[1],
 	&musb_dma_tx_ch[2],
@@ -71,23 +71,11 @@ static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_TX_CHANNELS] = {
 static struct ux500_musb_board_data musb_board_data = {
 	.dma_rx_param_array = ux500_dma_rx_param_array,
 	.dma_tx_param_array = ux500_dma_tx_param_array,
-	.num_rx_channels = UX500_MUSB_DMA_NUM_RX_CHANNELS,
-	.num_tx_channels = UX500_MUSB_DMA_NUM_TX_CHANNELS,
 	.dma_filter = stedma40_filter,
 };
 
-static u64 ux500_musb_dmamask = DMA_BIT_MASK(32);
-
-static struct musb_hdrc_config musb_hdrc_config = {
-	.multipoint	= true,
-	.dyn_fifo	= true,
-	.num_eps	= 16,
-	.ram_bits	= 16,
-};
-
 static struct musb_hdrc_platform_data musb_platform_data = {
 	.mode = MUSB_OTG,
-	.config = &musb_hdrc_config,
 	.board_data = &musb_board_data,
 };
 
@@ -108,7 +96,6 @@ struct platform_device ux500_musb_device = {
 	.id = 0,
 	.dev = {
 		.platform_data = &musb_platform_data,
-		.dma_mask = &ux500_musb_dmamask,
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 	.num_resources = ARRAY_SIZE(usb_resources),
@@ -119,7 +106,7 @@ static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type)
 {
 	u32 idx;
 
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_CHANNELS; idx++)
+	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
 		musb_dma_rx_ch[idx].dev_type = dev_type[idx];
 }
 
@@ -127,7 +114,7 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type)
 {
 	u32 idx;
 
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_TX_CHANNELS; idx++)
+	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
 		musb_dma_tx_ch[idx].dev_type = dev_type[idx];
 }
 

drivers/dma/ste_dma40_ll.c

@@ -10,6 +10,18 @@
 
 #include "ste_dma40_ll.h"
 
+u8 d40_width_to_bits(enum dma_slave_buswidth width)
+{
+	if (width == DMA_SLAVE_BUSWIDTH_1_BYTE)
+		return STEDMA40_ESIZE_8_BIT;
+	else if (width == DMA_SLAVE_BUSWIDTH_2_BYTES)
+		return STEDMA40_ESIZE_16_BIT;
+	else if (width == DMA_SLAVE_BUSWIDTH_8_BYTES)
+		return STEDMA40_ESIZE_64_BIT;
+	else
+		return STEDMA40_ESIZE_32_BIT;
+}
+
 /* Sets up proper LCSP1 and LCSP3 register for a logical channel */
 void d40_log_cfg(struct stedma40_chan_cfg *cfg,
 		 u32 *lcsp1, u32 *lcsp3)
@@ -18,32 +30,34 @@ void d40_log_cfg(struct stedma40_chan_cfg *cfg,
 	u32 l1 = 0; /* src */
 
 	/* src is mem? -> increase address pos */
-	if (cfg->dir ==  STEDMA40_MEM_TO_PERIPH ||
-	    cfg->dir ==  STEDMA40_MEM_TO_MEM)
-		l1 |= 1 << D40_MEM_LCSP1_SCFG_INCR_POS;
+	if (cfg->dir ==  DMA_MEM_TO_DEV ||
+	    cfg->dir ==  DMA_MEM_TO_MEM)
+		l1 |= BIT(D40_MEM_LCSP1_SCFG_INCR_POS);
 
 	/* dst is mem? -> increase address pos */
-	if (cfg->dir ==  STEDMA40_PERIPH_TO_MEM ||
-	    cfg->dir ==  STEDMA40_MEM_TO_MEM)
-		l3 |= 1 << D40_MEM_LCSP3_DCFG_INCR_POS;
+	if (cfg->dir ==  DMA_DEV_TO_MEM ||
+	    cfg->dir ==  DMA_MEM_TO_MEM)
+		l3 |= BIT(D40_MEM_LCSP3_DCFG_INCR_POS);
 
 	/* src is hw? -> master port 1 */
-	if (cfg->dir ==  STEDMA40_PERIPH_TO_MEM ||
-	    cfg->dir ==  STEDMA40_PERIPH_TO_PERIPH)
-		l1 |= 1 << D40_MEM_LCSP1_SCFG_MST_POS;
+	if (cfg->dir ==  DMA_DEV_TO_MEM ||
+	    cfg->dir ==  DMA_DEV_TO_DEV)
+		l1 |= BIT(D40_MEM_LCSP1_SCFG_MST_POS);
 
 	/* dst is hw? -> master port 1 */
-	if (cfg->dir ==  STEDMA40_MEM_TO_PERIPH ||
-	    cfg->dir ==  STEDMA40_PERIPH_TO_PERIPH)
-		l3 |= 1 << D40_MEM_LCSP3_DCFG_MST_POS;
+	if (cfg->dir ==  DMA_MEM_TO_DEV ||
+	    cfg->dir ==  DMA_DEV_TO_DEV)
+		l3 |= BIT(D40_MEM_LCSP3_DCFG_MST_POS);
 
-	l3 |= 1 << D40_MEM_LCSP3_DCFG_EIM_POS;
+	l3 |= BIT(D40_MEM_LCSP3_DCFG_EIM_POS);
 	l3 |= cfg->dst_info.psize << D40_MEM_LCSP3_DCFG_PSIZE_POS;
-	l3 |= cfg->dst_info.data_width << D40_MEM_LCSP3_DCFG_ESIZE_POS;
+	l3 |= d40_width_to_bits(cfg->dst_info.data_width)
+		<< D40_MEM_LCSP3_DCFG_ESIZE_POS;
 
-	l1 |= 1 << D40_MEM_LCSP1_SCFG_EIM_POS;
+	l1 |= BIT(D40_MEM_LCSP1_SCFG_EIM_POS);
 	l1 |= cfg->src_info.psize << D40_MEM_LCSP1_SCFG_PSIZE_POS;
-	l1 |= cfg->src_info.data_width << D40_MEM_LCSP1_SCFG_ESIZE_POS;
+	l1 |= d40_width_to_bits(cfg->src_info.data_width)
+		<< D40_MEM_LCSP1_SCFG_ESIZE_POS;
 
 	*lcsp1 = l1;
 	*lcsp3 = l3;
@@ -55,59 +69,61 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg, u32 *src_cfg, u32 *dst_cfg)
 	u32 src = 0;
 	u32 dst = 0;
 
-	if ((cfg->dir ==  STEDMA40_PERIPH_TO_MEM) ||
-	    (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
+	if ((cfg->dir == DMA_DEV_TO_MEM) ||
+	    (cfg->dir == DMA_DEV_TO_DEV)) {
 		/* Set master port to 1 */
-		src |= 1 << D40_SREG_CFG_MST_POS;
+		src |= BIT(D40_SREG_CFG_MST_POS);
 		src |= D40_TYPE_TO_EVENT(cfg->dev_type);
 
 		if (cfg->src_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
-			src |= 1 << D40_SREG_CFG_PHY_TM_POS;
+			src |= BIT(D40_SREG_CFG_PHY_TM_POS);
 		else
 			src |= 3 << D40_SREG_CFG_PHY_TM_POS;
 	}
-	if ((cfg->dir ==  STEDMA40_MEM_TO_PERIPH) ||
-	    (cfg->dir == STEDMA40_PERIPH_TO_PERIPH)) {
+	if ((cfg->dir == DMA_MEM_TO_DEV) ||
+	    (cfg->dir == DMA_DEV_TO_DEV)) {
 		/* Set master port to 1 */
-		dst |= 1 << D40_SREG_CFG_MST_POS;
+		dst |= BIT(D40_SREG_CFG_MST_POS);
 		dst |= D40_TYPE_TO_EVENT(cfg->dev_type);
 
 		if (cfg->dst_info.flow_ctrl == STEDMA40_NO_FLOW_CTRL)
-			dst |= 1 << D40_SREG_CFG_PHY_TM_POS;
+			dst |= BIT(D40_SREG_CFG_PHY_TM_POS);
 		else
 			dst |= 3 << D40_SREG_CFG_PHY_TM_POS;
 	}
 	/* Interrupt on end of transfer for destination */
-	dst |= 1 << D40_SREG_CFG_TIM_POS;
+	dst |= BIT(D40_SREG_CFG_TIM_POS);
 
 	/* Generate interrupt on error */
-	src |= 1 << D40_SREG_CFG_EIM_POS;
-	dst |= 1 << D40_SREG_CFG_EIM_POS;
+	src |= BIT(D40_SREG_CFG_EIM_POS);
+	dst |= BIT(D40_SREG_CFG_EIM_POS);
 
 	/* PSIZE */
 	if (cfg->src_info.psize != STEDMA40_PSIZE_PHY_1) {
-		src |= 1 << D40_SREG_CFG_PHY_PEN_POS;
+		src |= BIT(D40_SREG_CFG_PHY_PEN_POS);
 		src |= cfg->src_info.psize << D40_SREG_CFG_PSIZE_POS;
 	}
 	if (cfg->dst_info.psize != STEDMA40_PSIZE_PHY_1) {
-		dst |= 1 << D40_SREG_CFG_PHY_PEN_POS;
+		dst |= BIT(D40_SREG_CFG_PHY_PEN_POS);
 		dst |= cfg->dst_info.psize << D40_SREG_CFG_PSIZE_POS;
 	}
 
 	/* Element size */
-	src |= cfg->src_info.data_width << D40_SREG_CFG_ESIZE_POS;
-	dst |= cfg->dst_info.data_width << D40_SREG_CFG_ESIZE_POS;
+	src |= d40_width_to_bits(cfg->src_info.data_width)
+		<< D40_SREG_CFG_ESIZE_POS;
+	dst |= d40_width_to_bits(cfg->dst_info.data_width)
+		<< D40_SREG_CFG_ESIZE_POS;
 
 	/* Set the priority bit to high for the physical channel */
 	if (cfg->high_priority) {
-		src |= 1 << D40_SREG_CFG_PRI_POS;
-		dst |= 1 << D40_SREG_CFG_PRI_POS;
+		src |= BIT(D40_SREG_CFG_PRI_POS);
+		dst |= BIT(D40_SREG_CFG_PRI_POS);
 	}
 
 	if (cfg->src_info.big_endian)
-		src |= 1 << D40_SREG_CFG_LBE_POS;
+		src |= BIT(D40_SREG_CFG_LBE_POS);
 	if (cfg->dst_info.big_endian)
-		dst |= 1 << D40_SREG_CFG_LBE_POS;
+		dst |= BIT(D40_SREG_CFG_LBE_POS);
 
 	*src_cfg = src;
 	*dst_cfg = dst;
@@ -133,23 +149,22 @@ static int d40_phy_fill_lli(struct d40_phy_lli *lli,
 		num_elems = 2 << psize;
 
 	/* Must be aligned */
-	if (!IS_ALIGNED(data, 0x1 << data_width))
+	if (!IS_ALIGNED(data, data_width))
 		return -EINVAL;
 
 	/* Transfer size can't be smaller than (num_elms * elem_size) */
-	if (data_size < num_elems * (0x1 << data_width))
+	if (data_size < num_elems * data_width)
 		return -EINVAL;
 
 	/* The number of elements. IE now many chunks */
-	lli->reg_elt = (data_size >> data_width) << D40_SREG_ELEM_PHY_ECNT_POS;
+	lli->reg_elt = (data_size / data_width) << D40_SREG_ELEM_PHY_ECNT_POS;
 
 	/*
 	 * Distance to next element sized entry.
 	 * Usually the size of the element unless you want gaps.
 	 */
 	if (addr_inc)
-		lli->reg_elt |= (0x1 << data_width) <<
-			D40_SREG_ELEM_PHY_EIDX_POS;
+		lli->reg_elt |= data_width << D40_SREG_ELEM_PHY_EIDX_POS;
 
 	/* Where the data is */
 	lli->reg_ptr = data;
@@ -157,18 +172,20 @@ static int d40_phy_fill_lli(struct d40_phy_lli *lli,
 
 	/* If this scatter list entry is the last one, no next link */
 	if (next_lli == 0)
-		lli->reg_lnk = 0x1 << D40_SREG_LNK_PHY_TCP_POS;
+		lli->reg_lnk = BIT(D40_SREG_LNK_PHY_TCP_POS);
 	else
 		lli->reg_lnk = next_lli;
 
 	/* Set/clear interrupt generation on this link item.*/
 	if (term_int)
-		lli->reg_cfg |= 0x1 << D40_SREG_CFG_TIM_POS;
+		lli->reg_cfg |= BIT(D40_SREG_CFG_TIM_POS);
 	else
-		lli->reg_cfg &= ~(0x1 << D40_SREG_CFG_TIM_POS);
+		lli->reg_cfg &= ~BIT(D40_SREG_CFG_TIM_POS);
 
-	/* Post link */
-	lli->reg_lnk |= 0 << D40_SREG_LNK_PHY_PRE_POS;
+	/*
+	 * Post link - D40_SREG_LNK_PHY_PRE_POS = 0
+	 * Relink happens after transfer completion.
+	 */
 
 	return 0;
 }
@@ -177,16 +194,16 @@ static int d40_seg_size(int size, int data_width1, int data_width2)
 {
 	u32 max_w = max(data_width1, data_width2);
 	u32 min_w = min(data_width1, data_width2);
-	u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE << min_w, 1 << max_w);
+	u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w);
 
 	if (seg_max > STEDMA40_MAX_SEG_SIZE)
-		seg_max -= (1 << max_w);
+		seg_max -= max_w;
 
 	if (size <= seg_max)
 		return size;
 
 	if (size <= 2 * seg_max)
-		return ALIGN(size / 2, 1 << max_w);
+		return ALIGN(size / 2, max_w);
 
 	return seg_max;
 }
@@ -352,10 +369,10 @@ static void d40_log_fill_lli(struct d40_log_lli *lli,
 	lli->lcsp13 = reg_cfg;
 
 	/* The number of elements to transfer */
-	lli->lcsp02 = ((data_size >> data_width) <<
+	lli->lcsp02 = ((data_size / data_width) <<
 		       D40_MEM_LCSP0_ECNT_POS) & D40_MEM_LCSP0_ECNT_MASK;
 
-	BUG_ON((data_size >> data_width) > STEDMA40_MAX_SEG_SIZE);
+	BUG_ON((data_size / data_width) > STEDMA40_MAX_SEG_SIZE);
 
 	/* 16 LSBs address of the current element */
 	lli->lcsp02 |= data & D40_MEM_LCSP0_SPTR_MASK;

drivers/usb/musb/ux500.c

@@ -25,11 +25,19 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/usb/musb-ux500.h>
 
 #include "musb_core.h"
 
+static struct musb_hdrc_config ux500_musb_hdrc_config = {
+	.multipoint	= true,
+	.dyn_fifo	= true,
+	.num_eps	= 16,
+	.ram_bits	= 16,
+};
+
 struct ux500_glue {
 	struct device		*dev;
 	struct platform_device	*musb;
@@ -187,14 +195,57 @@ static const struct musb_platform_ops ux500_ops = {
 	.set_vbus	= ux500_musb_set_vbus,
 };
 
+static struct musb_hdrc_platform_data *
+ux500_of_probe(struct platform_device *pdev, struct device_node *np)
+{
+	struct musb_hdrc_platform_data *pdata;
+	const char *mode;
+	int strlen;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return NULL;
+
+	mode = of_get_property(np, "dr_mode", &strlen);
+	if (!mode) {
+		dev_err(&pdev->dev, "No 'dr_mode' property found\n");
+		return NULL;
+	}
+
+	if (strlen > 0) {
+		if (!strcmp(mode, "host"))
+			pdata->mode = MUSB_HOST;
+		if (!strcmp(mode, "otg"))
+			pdata->mode = MUSB_OTG;
+		if (!strcmp(mode, "peripheral"))
+			pdata->mode = MUSB_PERIPHERAL;
+	}
+
+	return pdata;
+}
+
 static int ux500_probe(struct platform_device *pdev)
 {
 	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct device_node		*np = pdev->dev.of_node;
 	struct platform_device		*musb;
 	struct ux500_glue		*glue;
 	struct clk			*clk;
 	int				ret = -ENOMEM;
 
+	if (!pdata) {
+		if (np) {
+			pdata = ux500_of_probe(pdev, np);
+			if (!pdata)
+				goto err0;
+
+			pdev->dev.platform_data = pdata;
+		} else {
+			dev_err(&pdev->dev, "no pdata or device tree found\n");
+			goto err0;
+		}
+	}
+
 	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
 	if (!glue) {
 		dev_err(&pdev->dev, "failed to allocate glue context\n");
@@ -221,14 +272,16 @@ static int ux500_probe(struct platform_device *pdev)
 	}
 
 	musb->dev.parent		= &pdev->dev;
-	musb->dev.dma_mask		= pdev->dev.dma_mask;
+	musb->dev.dma_mask		= &pdev->dev.coherent_dma_mask;
 	musb->dev.coherent_dma_mask	= pdev->dev.coherent_dma_mask;
+	musb->dev.of_node		= pdev->dev.of_node;
 
 	glue->dev			= &pdev->dev;
 	glue->musb			= musb;
 	glue->clk			= clk;
 
 	pdata->platform_ops		= &ux500_ops;
+	pdata->config 			= &ux500_musb_hdrc_config;
 
 	platform_set_drvdata(pdev, glue);
 
@@ -320,12 +373,18 @@ static const struct dev_pm_ops ux500_pm_ops = {
 #define DEV_PM_OPS	NULL
 #endif
 
+static const struct of_device_id ux500_match[] = {
+        { .compatible = "stericsson,db8500-musb", },
+        {}
+};
+
 static struct platform_driver ux500_driver = {
 	.probe		= ux500_probe,
 	.remove		= ux500_remove,
 	.driver		= {
 		.name	= "musb-ux500",
 		.pm	= DEV_PM_OPS,
+		.of_match_table = ux500_match,
 	},
 };
 

drivers/usb/musb/ux500_dma.c

@@ -34,6 +34,11 @@
 #include <linux/platform_data/usb-musb-ux500.h>
 #include "musb_core.h"
 
+static const char *iep_chan_names[] = { "iep_1_9", "iep_2_10", "iep_3_11", "iep_4_12",
+					"iep_5_13", "iep_6_14", "iep_7_15", "iep_8" };
+static const char *oep_chan_names[] = { "oep_1_9", "oep_2_10", "oep_3_11", "oep_4_12",
+					"oep_5_13", "oep_6_14", "oep_7_15", "oep_8" };
+
 struct ux500_dma_channel {
 	struct dma_channel channel;
 	struct ux500_dma_controller *controller;
@@ -48,10 +53,8 @@ struct ux500_dma_channel {
 
 struct ux500_dma_controller {
 	struct dma_controller controller;
-	struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_CHANNELS];
-	struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_TX_CHANNELS];
-	u32	num_rx_channels;
-	u32	num_tx_channels;
+	struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
+	struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS];
 	void *private_data;
 	dma_addr_t phy_base;
 };
@@ -144,19 +147,15 @@ static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c,
 	struct ux500_dma_channel *ux500_channel = NULL;
 	struct musb *musb = controller->private_data;
 	u8 ch_num = hw_ep->epnum - 1;
-	u32 max_ch;
 
-	/* Max 8 DMA channels (0 - 7). Each DMA channel can only be allocated
+	/* 8 DMA channels (0 - 7). Each DMA channel can only be allocated
 	 * to specified hw_ep. For example DMA channel 0 can only be allocated
 	 * to hw_ep 1 and 9.
 	 */
 	if (ch_num > 7)
 		ch_num -= 8;
 
-	max_ch = is_tx ? controller->num_tx_channels :
-			controller->num_rx_channels;
-
-	if (ch_num >= max_ch)
+	if (ch_num >= UX500_MUSB_DMA_NUM_RX_TX_CHANNELS)
 		return NULL;
 
 	ux500_channel = is_tx ? &(controller->tx_channel[ch_num]) :
@@ -264,7 +263,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c)
 	struct dma_channel *channel;
 	u8 ch_num;
 
-	for (ch_num = 0; ch_num < controller->num_rx_channels; ch_num++) {
+	for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
 		channel = &controller->rx_channel[ch_num].channel;
 		ux500_channel = channel->private_data;
 
@@ -274,7 +273,7 @@ static int ux500_dma_controller_stop(struct dma_controller *c)
 			dma_release_channel(ux500_channel->dma_chan);
 	}
 
-	for (ch_num = 0; ch_num < controller->num_tx_channels; ch_num++) {
+	for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) {
 		channel = &controller->tx_channel[ch_num].channel;
 		ux500_channel = channel->private_data;
 
@@ -295,34 +294,36 @@ static int ux500_dma_controller_start(struct dma_controller *c)
 	struct musb *musb = controller->private_data;
 	struct device *dev = musb->controller;
 	struct musb_hdrc_platform_data *plat = dev->platform_data;
-	struct ux500_musb_board_data *data = plat->board_data;
+	struct ux500_musb_board_data *data;
 	struct dma_channel *dma_channel = NULL;
+	char **chan_names;
 	u32 ch_num;
 	u8 dir;
 	u8 is_tx = 0;
 
 	void **param_array;
 	struct ux500_dma_channel *channel_array;
-	u32 ch_count;
 	dma_cap_mask_t mask;
 
-	if ((data->num_rx_channels > UX500_MUSB_DMA_NUM_RX_CHANNELS) ||
-		(data->num_tx_channels > UX500_MUSB_DMA_NUM_TX_CHANNELS))
+	if (!plat) {
+		dev_err(musb->controller, "No platform data\n");
 		return -EINVAL;
+	}
 
-	controller->num_rx_channels = data->num_rx_channels;
-	controller->num_tx_channels = data->num_tx_channels;
+	data = plat->board_data;
 
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
 	/* Prepare the loop for RX channels */
 	channel_array = controller->rx_channel;
-	ch_count = data->num_rx_channels;
-	param_array = data->dma_rx_param_array;
+	param_array = data ? data->dma_rx_param_array : NULL;
+	chan_names = (char **)iep_chan_names;
 
 	for (dir = 0; dir < 2; dir++) {
-		for (ch_num = 0; ch_num < ch_count; ch_num++) {
+		for (ch_num = 0;
+		     ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS;
+		     ch_num++) {
 			ux500_channel = &channel_array[ch_num];
 			ux500_channel->controller = controller;
 			ux500_channel->ch_num = ch_num;
@@ -333,9 +334,15 @@ static int ux500_dma_controller_start(struct dma_controller *c)
 			dma_channel->status = MUSB_DMA_STATUS_FREE;
 			dma_channel->max_len = SZ_16M;
 
-			ux500_channel->dma_chan = dma_request_channel(mask,
-							data->dma_filter,
-							param_array[ch_num]);
+			ux500_channel->dma_chan =
+				dma_request_slave_channel(dev, chan_names[ch_num]);
+
+			if (!ux500_channel->dma_chan)
+				ux500_channel->dma_chan =
+					dma_request_channel(mask,
+							    data->dma_filter,
+							    param_array[ch_num]);
+
 			if (!ux500_channel->dma_chan) {
 				ERR("Dma pipe allocation error dir=%d ch=%d\n",
 					dir, ch_num);
@@ -350,8 +357,8 @@ static int ux500_dma_controller_start(struct dma_controller *c)
 
 		/* Prepare the loop for TX channels */
 		channel_array = controller->tx_channel;
-		ch_count = data->num_tx_channels;
-		param_array = data->dma_tx_param_array;
+		param_array = data ? data->dma_tx_param_array : NULL;
+		chan_names = (char **)oep_chan_names;
 		is_tx = 1;
 	}
 

include/linux/platform_data/dma-ste-dma40.h

@@ -70,21 +70,6 @@ enum stedma40_flow_ctrl {
 	STEDMA40_FLOW_CTRL,
 };
 
-enum stedma40_periph_data_width {
-	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
-	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
-	STEDMA40_WORD_WIDTH = STEDMA40_ESIZE_32_BIT,
-	STEDMA40_DOUBLEWORD_WIDTH = STEDMA40_ESIZE_64_BIT
-};
-
-enum stedma40_xfer_dir {
-	STEDMA40_MEM_TO_MEM = 1,
-	STEDMA40_MEM_TO_PERIPH,
-	STEDMA40_PERIPH_TO_MEM,
-	STEDMA40_PERIPH_TO_PERIPH
-};
-
-
 /**
  * struct stedma40_half_channel_info - dst/src channel configuration
  *
@@ -95,7 +80,7 @@ enum stedma40_xfer_dir {
  */
 struct stedma40_half_channel_info {
 	bool big_endian;
-	enum stedma40_periph_data_width data_width;
+	enum dma_slave_buswidth data_width;
 	int psize;
 	enum stedma40_flow_ctrl flow_ctrl;
 };
@@ -120,7 +105,7 @@ struct stedma40_half_channel_info {
  *
  */
 struct stedma40_chan_cfg {
-	enum stedma40_xfer_dir			 dir;
+	enum dma_transfer_direction		 dir;
 	bool					 high_priority;
 	bool					 realtime;
 	enum stedma40_mode			 mode;
@@ -147,6 +132,7 @@ struct stedma40_chan_cfg {
  * @num_of_soft_lli_chans: The number of channels that needs to be configured
  * to use SoftLLI.
  * @use_esram_lcla: flag for mapping the lcla into esram region
+ * @num_of_memcpy_chans: The number of channels reserved for memcpy.
  * @num_of_phy_chans: The number of physical channels implemented in HW.
  * 0 means reading the number of channels from DMA HW but this is only valid
  * for 'multiple of 4' channels, like 8.
@@ -156,6 +142,7 @@ struct stedma40_platform_data {
 	int				*soft_lli_chans;
 	int				 num_of_soft_lli_chans;
 	bool				 use_esram_lcla;
+	int				 num_of_memcpy_chans;
 	int				 num_of_phy_chans;
 };
 

include/linux/platform_data/usb-musb-ux500.h

@@ -9,14 +9,11 @@
 
 #include <linux/dmaengine.h>
 
-#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8
-#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8
+#define UX500_MUSB_DMA_NUM_RX_TX_CHANNELS 8
 
 struct ux500_musb_board_data {
 	void	**dma_rx_param_array;
 	void	**dma_tx_param_array;
-	u32	num_rx_channels;
-	u32	num_tx_channels;
 	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
 };
 

sound/soc/ux500/ux500_pcm.c

@@ -76,20 +76,20 @@ static struct dma_chan *ux500_pcm_request_chan(struct snd_soc_pcm_runtime *rtd,
 	dma_params = snd_soc_dai_get_dma_data(dai, substream);
 	dma_cfg = dma_params->dma_cfg;
 
-	mem_data_width = STEDMA40_HALFWORD_WIDTH;
+	mem_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 
 	switch (dma_params->data_size) {
 	case 32:
-		per_data_width = STEDMA40_WORD_WIDTH;
+		per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 		break;
 	case 16:
-		per_data_width = STEDMA40_HALFWORD_WIDTH;
+		per_data_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 		break;
 	case 8:
-		per_data_width = STEDMA40_BYTE_WIDTH;
+		per_data_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
 		break;
 	default:
-		per_data_width = STEDMA40_WORD_WIDTH;
+		per_data_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	}
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {