Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Mark Eins: Fix configuration.
  MIPS: Fix TIF_32BIT undefined problem when seccomp is disabled

arch/mips/Kconfig

@@ -238,8 +238,12 @@ config MIPS_SIM
 	  This option enables support for MIPS Technologies MIPSsim software
 	  emulator.
 
-config MACH_EMMA
-	bool "NEC EMMA series based machines"
+config NEC_MARKEINS
+	bool "NEC EMMA2RH Mark-eins board"
+	select SOC_EMMA2RH
+	select HW_HAS_PCI
+	help
+	  This enables support for the NEC Electronics Mark-eins boards.
 
 config MACH_VR41XX
 	bool "NEC VR4100 series based machines"
@@ -637,7 +641,6 @@ endchoice
 
 source "arch/mips/alchemy/Kconfig"
 source "arch/mips/basler/excite/Kconfig"
-source "arch/mips/emma/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
@@ -895,6 +898,18 @@ config MIPS_RM9122
 	bool
 	select SERIAL_RM9000
 
+config SOC_EMMA2RH
+	bool
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select SWAP_IO_SPACE
+	select SYS_HAS_CPU_R5500
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+
 config SOC_PNX833X
 	bool
 	select CEVT_R4K
@@ -930,11 +945,6 @@ config SOC_PNX8550
 config SWAP_IO_SPACE
 	bool
 
-config EMMA2RH
-	bool
-	depends on MARKEINS
-	default y
-
 config SERIAL_RM9000
 	bool
 

arch/mips/Makefile

@@ -416,7 +416,7 @@ load-$(CONFIG_PNX8550_STB810)	+= 0xffffffff80060000
 #
 # Common NEC EMMAXXX
 #
-core-$(CONFIG_SOC_EMMA)		+= arch/mips/emma/common/
+core-$(CONFIG_SOC_EMMA2RH)	+= arch/mips/emma/common/
 cflags-$(CONFIG_SOC_EMMA2RH)	+= -I$(srctree)/arch/mips/include/asm/mach-emma2rh
 
 #

arch/mips/configs/emma2rh_defconfig → arch/mips/configs/markeins_defconfig

@@ -35,7 +35,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_PMC_YOSEMITE is not set
-CONFIG_MARKEINS=y
+CONFIG_NEC_MARKEINS=y
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
 # CONFIG_SGI_IP32 is not set
@@ -68,7 +68,7 @@ CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
-CONFIG_EMMA2RH=y
+CONFIG_SOC_EMMA2RH=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
 #
@@ -574,9 +574,9 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x1e000000
-CONFIG_MTD_PHYSMAP_LEN=0x02000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_PLATRAM is not set
 
 #

arch/mips/emma/Kconfig

-choice
-	prompt "Machine type"
-	depends on MACH_EMMA
-	default NEC_MARKEINS
-
-config NEC_MARKEINS
-	bool "NEC EMMA2RH Mark-eins board"
-	select SOC_EMMA2RH
-	select HW_HAS_PCI
-	help
-	  This enables support for the NEC Electronics Mark-eins boards.
-
-endchoice
-
-config SOC_EMMA2RH
-	bool
-	select SOC_EMMA
-	select SYS_HAS_CPU_R5500
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-
-config SOC_EMMA
-	bool
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_BIG_ENDIAN

arch/mips/emma/markeins/platform.c

@@ -141,13 +141,6 @@ static struct  platform_device serial_emma = {
 	},
 };
 
-static struct platform_device *devices[] = {
-	&i2c_emma_devices[0],
-	&i2c_emma_devices[1],
-	&i2c_emma_devices[2],
-	&serial_emma,
-};
-
 static struct mtd_partition markeins_parts[] = {
 	[0] = {
 		.name = "RootFS",
@@ -181,11 +174,39 @@ static struct mtd_partition markeins_parts[] = {
 	},
 };
 
+static struct physmap_flash_data markeins_flash_data = {
+	.width		= 2,
+	.nr_parts	= ARRAY_SIZE(markeins_parts),
+	.parts		= markeins_parts
+};
+
+static struct resource markeins_flash_resource = {
+	.start		= 0x1e000000,
+	.end		= 0x02000000,
+	.flags		= IORESOURCE_MEM
+};
+
+static struct platform_device markeins_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+        	.platform_data  = &markeins_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &markeins_flash_resource,
+};
+
+static struct platform_device *devices[] = {
+	i2c_emma_devices,
+	i2c_emma_devices + 1,
+	i2c_emma_devices + 2,
+	&serial_emma,
+	&markeins_flash_device,
+};
+
 static int __init platform_devices_setup(void)
 {
-	physmap_set_partitions(markeins_parts, ARRAY_SIZE(markeins_parts));
 	return platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 arch_initcall(platform_devices_setup);
-

arch/mips/include/asm/seccomp.h

@@ -15,8 +15,6 @@
  */
 #ifdef CONFIG_MIPS32_O32
 
-#define TIF_32BIT TIF_32BIT_REGS
-
 #define __NR_seccomp_read_32		4003
 #define __NR_seccomp_write_32		4004
 #define __NR_seccomp_exit_32		4001
@@ -24,8 +22,6 @@
 
 #elif defined(CONFIG_MIPS32_N32)
 
-#define TIF_32BIT _TIF_32BIT_ADDR
-
 #define __NR_seccomp_read_32		6000
 #define __NR_seccomp_write_32		6001
 #define __NR_seccomp_exit_32		6058

arch/mips/include/asm/thread_info.h

@@ -127,6 +127,12 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define TIF_LOAD_WATCH		25	/* If set, load watch registers */
 #define TIF_SYSCALL_TRACE	31	/* syscall trace active */
 
+#ifdef CONFIG_MIPS32_O32
+#define TIF_32BIT TIF_32BIT_REGS
+#elif defined(CONFIG_MIPS32_N32)
+#define TIF_32BIT _TIF_32BIT_ADDR
+#endif /* CONFIG_MIPS32_O32 */
+
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)